Hương tiêu phái BPI-R3
Sinovoip Banana Pi BPI-R3 trắc thí thiết bị trang tại chỉ tương trung đích esd đại trung. Một hữu phối kiện, một hữu điện lãm, một hữu khoái tốc khải động, chỉ hữu thiết bị. Tại âu châu thị tràng, tha khả dĩTác vi sáo kiệnHoặcCận thiết bịTại á mã tốn thượng hoạch đắc. Cai sáo kiện hoàn bao quát:
- Điện nguyên
- Kim chúc ngoại xác
- 8 x thiên tuyến
- 8 x pigtailNgoại xác
Dã khả dĩ đan độc cấu mãi. Giới cách lược hữu bất đồng, đại đa sổ sáo kiện đê vu 200 âu nguyên.
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Thủ thứ khai cơ
Thủ tiên, ngã tất tu lộng thanh sở yếu sử dụng na chủng điện nguyên. Tha nhu yếu năng cú tại 12 phục đặc hạ đề cung cao đạt ** 2 an bồi **. Hạnh vận đích thị, ngã đích thật nghiệm thất lí hữu sung túc đích điện nguyên, sở dĩ tha thật tế thượng thị tức sáp tức dụng đích. Liên tiếp điện nguyên thời, hồng sắc điện nguyên LED hội lượng khởi. Hữu nhất hệ liệt 7 cá LED, tiêu ký như hạ:
- Áp thủy đôi
- G
- Ất
- W2G
- W5G
- Trường kỳ diễn tiến
- Cố thái ngạnh bàn
Ngã trảo bất đáo quan vu mỗi cá LED đích nhậm hà tế tiết. Kỳ trung nhất ta thị bất ngôn tự minh đích, đãn ngã vô pháp lộng thanh sở G hòa B LED đích dụng đồ.
Như quả một hữu khả khải động thiết bị, giá tựu thị xuyến hành khống chế đài thượng hiển kỳ đích nội dung.
F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 103F 0000
F3: 1001 0000 [0200]
F3: 1001 0000
F6: 300C 0028
F5: 480A 0031
00: 1005 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 103F 0000
F3: 1001 0000 [0200]
F3: 1001 0000
F6: 300C 0028
01: 102A 0001
02: 1005 0000
BP: 2000 00C0 [0001]
EC: 0000 0000 [3000]
T0: 0000 010F [010F]
System halt!
Vi liễu khán đáo nhậm hà thâu xuất, ngã tương ngã đích USB chuyển xuyến khẩu thích phối khí trực tiếp liên tiếp đáo bản thượng đích UART 3 châm xuyến khẩu.
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Quy cách
Tựu kỹ thuật quy cách nhi ngôn, Banana BPI-R3 thị nhất khoản xuất sắc đích thiết bị. Tha tại bất đồng tằng diện thượng đề cung liễu kỳ tha thiết bị thông thường khuyết phạp đích công năng. Dĩ hạ thị yếu điểm đích giản đoản liệt biểu.
- SoC MediatekMT7986/Filogic 830ARM Cortex-A53 cụ hữu 4 cá nội hạch hòa 2 GHz đích thời chung
- Song SFP 2.5G đoan khẩu
- Dụng vu LTE điều chế giải điều khí 4G đích mê nhĩ PCI Express sáp tào ( thông quá USB )
- Dụng vu khả tuyển LTE điều chế giải điều khí đích bản tái Micro SIM sáp tào
- Nội trí 8 GB eMMC thiểm tồn
- Nội trí Wifi6 chi trì thông quá
- MT7975N 2.4 GHz, đái 4 cá Wifi IPX đoan khẩu
- MT7975P 5 GHz, đái 4 cá Wifi IPX đoan khẩu
- Cộng 8 cá thiên tuyến đoan khẩu
- 2 GB nội tồn
- 1 cá USB 3.0 đoan khẩu
- Vi hình SD tạp tào
- Đái PCIe Gen2 x2 đích M.2 NVME SSD đoan khẩu
- Bản tái 128MB SPI NAND tồn trữ
- Bản tái 32MB SPI NOR tồn trữ
- GPIO dẫn cước (26)
- 2 x USB2 bản tái tiếp khẩu
- 1 x 1G dĩ thái võng WAN đoan khẩu
- Tập thành liên phát khoa MT7531 khai quan
- 4 cá 1G dĩ thái võng LAN đoan khẩu
- Phục vị án nữu
- WPS án nữu
2.5G võng lạc
Ngã nhận vi giá ta thiên hữu tất yếu đối 2.5G võng lạc thuyết nhất cú thoại. Giá tự hồ thị nhất cá hữu hiệu đích tuyển trạch, nhân vi 5G hòa 10G thiết bị nhưng nhiên hữu điểm ngang quý thả háo điện. Nhiên nhi 2.5G tịnh bất thường kiến. Thường thí vi quang tiêm (LR / SR) trảo đáo nhất cá 2.5G kiêm dung đích SFP. Tha môn phi thường hãn kiến. Ngã năng trảo đáo đích nhất cá thị TP-Link TL-SM411LSA ( quang tiêm ), di hám đích thị tha tại âu châu bất tượng TP-Link đích TL-SM410U ( đồng ) na dạng khả dụng. Lưỡng cá thích phối khí quân do chế tạo thương trắc thí.
Ngã thường thí liễu nhất cá mô khối, khán khởi lai ngận hợp thích, đãn thật tế thượng bất thị:Mikrotik S+RJ10,Chi trì 1G / 2.5G hòa 10G tốc suất, đãn hương tiêu phái vô pháp thức biệt. Khả năng thị nhân vi tha thị SFP+, nhi Pi cận sử dụng SFP.
Mon Nov 21 19:54:42 2022 kern.info kernel: [ 48.606834] sfp sfp2: module MikroTik S+RJ10 rev 2.16 sn F06003AE68AB dc 220214
Mon Nov 21 19:54:42 2022 kern.warn kernel: [ 48.616225] sfp sfp2: Host does not support 1.5W modules, module left in power mode 1
Mon Nov 21 19:54:42 2022 kern.err kernel: [ 48.624053] mt7530 mdio-bus:1f sfp2: vali[ 48.665987] hwmon hwmon3: temp1_input not attached to any thermal zone
dation of inband/10gbase-r with support 0000000,00000400,000060c0 failed: -22
Mon Nov 21 19:54:42 2022 kern.info kernel: [ 48.665987] hwmon hwmon3: temp1_input not attached to any thermal zone
Ngã năng trảo đáo đích dụng vu 2.5G dĩ thái võng đích tối tiện nghi đích đồng lãm SFP thị lai tựfs.com đíchSFP-2.5GT,Giới cách ước vi 50 âu nguyên. Cụ hữu 2.5G đích giao hoán cơ dã tịnh bất thường kiến. Ưu điểm thị công háo phi thường đê, phối bị anh đặc nhĩ đẳng ưu chất tâm phiến tổ đích PCIe dĩ thái võng thích phối khí mỗi kiện thụ giới 30-40 âu nguyên.
2.5G dĩ thái võng khả dĩ hợp lý quyết định thăng cấp đáo. Tha đích tốc độ túc dĩ ứng đối Wifi 6 đồng bộ đái khoan tốc độ, giới cách thật huệ thả háo điện lượng thích trung. Nhân thử, như quả nâm tuyển trạch 2.5G, Banana Pi BPi-R3 khả năng phi thường thích hợp nâm.
Đối vu ngã đích bình luận, tuy nhiên ngã vô pháp hoạch đắc thích dụng vu Banana Pi đích SFP mô khối. Khởi sơ ngã tưởng hữu quang tiêm liên tiếp. Ngu nhạc nhất hạ: Thường thí sưu tác chi trì 2.5G dĩ thái võng tịnh đề cung SFP đoan khẩu đích võng tạp. Chỉ hữu na ta tài năng thích ứng quang tiêm liên tiếp. Ngã năng trảo đáo đích sở hữu thích phối khí đô thị đồng chế đích. Tối hậu ngã một năng sử 2.5G dĩ thái võng chính thường công tác, sở dĩ ngã sở hữu đích wifi cơ chuẩn trắc thí đô chỉ sử dụng 1G.
Khai cơ
Cai thiết bị dự trang liễu OpenWrt 21.02-SNAPSHOT dĩ cập NAND hòa NOR tâm phiến. Lộng thanh sở như hà tại dẫn đạo thiết bị chi gian tiến hành tuyển trạch hữu điểm khốn nan. Thiết bị trắc diện hữu nhất cá 4 thông đạo bát mã khai quan. Tiêu thiêm hữu điểm hỗn loạn. Nhất phương diện thị:
(1) (2) (3) (4)
Lánh nhất phương diện thị:
(A) (B) (C) (D)
Tại tha môn sử dụng đích Wiki trung:
(SW1-A) (SW1-B) (SW1-C) (SW1-D)
Ngã tương sử dụng hạ diện đích phù hào. Giá thị nâm tuyển trạch yếu sử dụng đích dẫn đạo thiết bị đích phương thức:
Biên tập
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Biên tập
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Di hám đích thị vô pháp tòng M.2 NVME SSD khải động, nhân thử giá chỉ thị ngạch ngoại đại dung lượng tồn trữ đích nhất cá tuyển hạng.
An trang hương thảo OpenWrt
Thủ tiên, an trang OpenWrt. Tối tân đích ổn định bản 22.03.2 bất chi trì cai thiết bị, đãn ngã nhu yếu hạ táisdcard đích khoái chiếu đồ tượng.Giá thị tương kỳ thiểm tồn đáo micro SD tạp đích phương pháp.
wget https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/openwrt-mediatek-filogic-bananapi_bpi-r3-sdcard.img.gz
--2022-11-19 14:22:20-- https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/openwrt-mediatek-filogic-bananapi_bpi-r3-sdcard.img.gz
Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt'
Resolving downloads.openwrt.org (downloads.openwrt.org)... 2a01:4f8:251:321::2, 168.119.138.211
Connecting to downloads.openwrt.org (downloads.openwrt.org)|2a01:4f8:251:321::2|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 21353937 (20M) [application/octet-stream]
Saving to: 'openwrt-mediatek-filogic-bananapi_bpi-r3-sdcard.img.gz'
openwrt-mediatek-filogic-bananapi_bpi-r3-sdcard 100%[=====================================================================================================>] 20,36M 2,63MB/s in 6,0s
2022-11-19 14:22:27 (3,39 MB/s) - 'openwrt-mediatek-filogic-bananapi_bpi-r3-sdcard.img.gz' saved [21353937/21353937]
sudo dd bs=4M if=openwrt-mediatek-filogic-bananapi_bpi-r3-sdcard.img of=/dev/sda
sudo sync
Đệ nhất thứ thường thí dĩ kinh tấu hiệu.Hoàn chỉnh đích dẫn đạo nhật chí khả dĩ tại phụ lụcTrung trảo đáo. SD tạp hòa tập thành đích EMMC bất năng đồng thời sử dụng, nhân vi tha môn tại SoC thượng cộng hưởng tương đồng đích tiếp khẩu.
Do vu khoái chiếu đồ tượng thông thường một hữu webgui, giá thị ngã thủ tiên an trang đích.
opkg install luci luci-ssl
Ngã dụng vu sở hữu trắc thí hòa cơ chuẩn trắc thí đích hương thảo OpenWrt dự phát bố bản, tha thị OpenWrt SNAPSHOT, r21629-9d8eff6799
Vô tuyến đích
Vô nhu ngạch ngoại đích nhuyễn kiện bao tức khả hoạch đắc Wifi chi trì. Tập thành đích MediaTek MT7986 chi trì 5 GHz hòa 2.5 GHz, tịnh chi trì Wifi 6 ( hựu danh 802.11ax ).
Giá thị wifi trạng thái đích dạng tử:
root@OpenWrt:/etc/config# wifi status
{
"radio0": {
"up": false,
"pending": false,
"autostart": true,
"disabled": true,
"retry_setup_failed": false,
"config": {
"path": "platform/soc/18000000.wmac",
"channel": "1",
"band": "2g",
"htmode": "HE20",
"disabled": true
},
"interfaces": [
{
"section": "default_radio0",
"config": {
"mode": "ap",
"ssid": "OpenWrt",
"encryption": "none",
"network": [
"lan"
],
"mode": "ap"
},
"vlans": [
],
"stations": [
]
}
]
},
"radio1": {
"up": false,
"pending": false,
"autostart": true,
"disabled": true,
"retry_setup_failed": false,
"config": {
"path": "platform/soc/18000000.wmac+1",
"channel": "36",
"band": "5g",
"htmode": "HE80",
"disabled": true
},
"interfaces": [
{
"section": "default_radio1",
"config": {
"mode": "ap",
"ssid": "OpenWrt",
"encryption": "none",
"network": [
"lan"
],
"mode": "ap"
},
"vlans": [
],
"stations": [
]
}
]
}
}
Cai bản đái hữu bát cá IPX thiên tuyến liên tiếp khí, tứ bội 2.4 GHz hòa tứ bội 5 GHz.
Như bổn văn đương sở kỳ, tập thành Wifi tâm phiến chi trì 2.4 hòa 5 GHz đích 4x4 Mimo. Tại Mediatek đích quy cách biểu trung, tha thuyết:
Chi trì song tần song tịnh phát
Tại ngã đích trắc thí trung, ngã vô pháp đồng thời sử dụng song tần,
Vi liễu hoạch đắc nhất ta sổ tự, ngã tại rpi3 bổn thân thượng an trang tịnh khải động liễu iperf3, tịnh sử dụng Lenovo T14 Gen1 AMD hòa Intel Corporation Wi-Fi 6 AX200 (rev 1a).
Giá thị ngã đích cơ chuẩn trắc thí đích OpenWrt wifi phối trí:
config wifi-device 'radio0'
option type 'mac80211'
option path 'platform/soc/18000000.wmac'
option band '2g'
option cell_density '0'
option htmode 'HE40'
option channel '9'
option txpower '20'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'bench'
option encryption 'sae'
option key 'temppw'
config wifi-device 'radio1'
option type 'mac80211'
option path 'platform/soc/18000000.wmac+1'
option band '5g'
option cell_density '0'
option htmode 'HE80'
option txpower '20'
option channel 'auto'
config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'bench'
option encryption 'sae'
option key 'temppw'
Vi liễu hoạch đắc tẫn khả năng cao đích tốc suất, ngã vi 2.5GHz khải dụng liễu 40 MHz đái khoan, vi 5 GHz tần đoạn khải dụng liễu 80 MHz đái khoan. Tuyển trạch 160Mhz vô hiệu.
Giá ta thị kết quả:
iperf3 -c 192.168.1.1 ✔ 10s
Connecting to host 192.168.1.1, port 5201
[ 5] local 192.168.1.191 port 32960 connected to 192.168.1.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 95.6 MBytes 802 Mbits/sec 0 2.78 MBytes
[ 5] 1.00-2.00 sec 109 MBytes 913 Mbits/sec 0 3.03 MBytes
[ 5] 2.00-3.00 sec 108 MBytes 902 Mbits/sec 0 3.03 MBytes
[ 5] 3.00-4.00 sec 76.2 MBytes 640 Mbits/sec 0 3.03 MBytes
[ 5] 4.00-5.00 sec 40.0 MBytes 336 Mbits/sec 1 3.03 MBytes
[ 5] 5.00-6.00 sec 85.0 MBytes 713 Mbits/sec 0 3.03 MBytes
[ 5] 6.00-7.00 sec 106 MBytes 891 Mbits/sec 0 3.03 MBytes
[ 5] 7.00-8.00 sec 106 MBytes 891 Mbits/sec 0 3.03 MBytes
[ 5] 8.00-9.00 sec 108 MBytes 902 Mbits/sec 0 3.03 MBytes
[ 5] 9.00-10.00 sec 102 MBytes 860 Mbits/sec 0 3.03 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 936 MBytes 785 Mbits/sec 1 sender
[ 5] 0.00-10.01 sec 934 MBytes 783 Mbits/sec receiver
iperf Done.
Ngã vô pháp đồng thời sử dụng 2.4 GHz hòa 5 GHz tần đoạn. Nhân thử, như quả hữu nhất thiên giá hội tấu hiệu, nâm khả dĩ kỳ vọng đột phá 1 GB/s đích môn hạm. Nâm khả dĩ thuyết vô tuyến kết quả cận thích dụng vu đan tần đoạn. Tha đích phong trị ước vi 900 Mbit/s, đãn tổng thể bình quân ước vi 600 Mbit/s.
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Giá thị iperf3 trắc thí thời 5GHz tiếp khẩu đích lưu lượng đồ.
Trung ương xử lý khí cơ chuẩn
Vi liễu hoạch đắc nhất ta quan vu nâm khả dĩ tòng CPU hoạch đắc đa thiếu tính năng đích sổ tự, ngã tố liễu nhất ta OpenSSL cơ chuẩn trắc thí. Hữu quan như hà chấp hành trắc thí đích canh đa tín tức, thỉnh tham duyệtThử trạm điểm.Nâm khả dĩ tại thử hiệt diệnThượng khán đáo dữ canh đa bất đồng hệ thống đích bỉ giác. Ngã đối tam chủng bất đồng đích thiết bị tiến hành liễu cơ chuẩn trắc thí:
- Địch tác DEC740
- PC dẫn kình APU4D4
- Hương tiêu phái Bpi-r3
Cáp hi trị
Dĩ MB/s vi đan vị đích trị ( 1 MB = 1,000,000 tự tiết )
Việt cao việt hảo
Thiết bị |
MD5 |
SHA-1 |
SHA-256 toán pháp |
SHA-512 |
---|
Bpi-r3 |
208,86221 |
760,25424 |
733,88059 |
176,53555 |
12 nguyệt 740 nhật |
403,88574 |
1041,77118 |
976,66389 |
333,8281 |
apu4d4 |
176,59563 |
109,61047 |
51,58117 |
60,28654 |
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Gia mật
Dĩ MB/s vi đan vị đích trị ( 1 MB = 1,000,000 tự tiết )
Việt cao việt hảo
Thiết bị |
DES |
3DES |
AES-128 |
AES-192 |
AES-256 |
---|
Bpi-r3 |
24,30031 |
8,42934 |
57,23338 |
50,99657 |
45,17342 |
12 nguyệt 740 nhật |
49,22709 |
17,73636 |
151,5578 |
130,53065 |
114,74193 |
apu4d4 |
15,70167 |
5,97129 |
36,04992 |
30,94528 |
27,28448 |
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
RSA/DSA thiêm danh nghiệm chứng
Dĩ hào miểu vi đan vị đích trì tục thời gian
Việt đê việt hảo
Thiết bị |
RSA tiêu chí |
RSA nghiệm chứng |
DSA tiêu chí |
DSA nghiệm chứng |
---|
Bpi-r3 |
5,458 nhân |
0,150 |
2,003 |
1,863 |
12 nguyệt 740 nhật |
1,276 |
0,039 |
0,536 |
0,508 |
apu4d4 |
7,665 |
0,223 |
3,004 |
2,763 |
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Mỗi miểu thiêm danh / nghiệm chứng
Việt cao việt hảo
Thiết bị |
RSA tiêu chí |
RSA nghiệm chứng |
DSA tiêu chí |
DSA nghiệm chứng |
---|
Bpi-r3 |
183,2 |
6683,3 |
499,2 |
536,7 |
12 nguyệt 740 nhật |
783,8 |
25588,8 |
1866 niên |
1969,6 |
apu4d4 |
130,5 |
4489,2 |
332,9 |
362 |
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Chính như dự kỳ đích na dạng, dec740 đích AMD khảm nhập thức CPU tại sở hữu cơ chuẩn trắc thí trung đô biểu hiện xuất sắc. Banana Pi tại mỗi thứ trắc thí trung dã đô bỉ APU4 đích AMD CPU khoái. Đối vu như thử đê công háo đích SoC, ngã hội thuyết Overwall đích tính năng phi thường bất thác.
Năng lượng tiêu háo:
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Nhân thử, ngã hội thuyết vận hành không nhàn dữ vận hành CPU mật tập hình nhậm vụ đích soa dị ước vi 0.3 ngõa. Đáo mục tiền vi chỉ tối đại đích bất đồng thị sử dụng NVME SSD. Tha sử trướng đan tăng gia liễu 3 ngõa đa nhất điểm. Khải dụng Wifi tương tăng gia đại ước 0.6 ngõa. Tại mãn tái tịnh hoàn toàn phối bị M.2 hòa mini PCIe thời, tha khả năng hội siêu quá 10 ngõa, giá xác thật thị nhất cá liễu bất khởi đích giới trị.
Tối hậu đích thoại
Như quả nâm đả toán cấu mãi thử thiết bị, ngã kiến nghị nâm tương kỳ dữ ngoại xác, wifi thiên tuyến điện lãm hòa thiên tuyến nhất khởi cấu mãi. Tối hợp hồ la tập đích cử động thị thải thủ giá dạng đích công cụBao.
Biên tập thiết hoán vi cư trung
Thiêm gia đồ phiến chú thích, bất siêu quá 140 tự ( khả tuyển )
Như quả nâm kế hoa tòng 1G đáo 2.5G dĩ thái võng, khảo lự đáo phi thường hảo đích tính giới bỉ, tha dã thị nhất cá phi thường lý tưởng đích tuyển trạch. Đương tiền bất ổn định đích OpenWrt phân chi dĩ kinh chân chính khả dụng, đãn nâm đương nhiên khả dĩ sử dụng chế tạo thương đích đồ tượng, giá thị nhất cá tương đương tân đích OpenWrt bản bổn.
Banana Pi r3 tính năng xuất sắc, đồng thời công háo cực đê.
Phụ lục
Hoàn chỉnh dẫn đạo nhật chí:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.79 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r21314-1996d600bd) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Thu Nov 17 15:43:55 2022
[ 0.000000] Machine model: Bananapi BPI-R3
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
[ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff]
[ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004fcfffff]
[ 0.000000] node 0: [mem 0x000000004fd00000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 17 pages/cpu s30040 r8192 d31400 u69632
[ 0.000000] pcpu-alloc: s30040 r8192 d31400 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Kernel command line: root=/dev/mmcblk0p65
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2043268K/2097152K available (8320K kernel code, 898K rwdata, 2176K rodata, 384K init, 300K bss, 53884K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000138] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.000146] pid_max: default: 32768 minimum: 301
[ 0.000230] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000243] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001126] rcu: Hierarchical SRCU implementation.
[ 0.001213] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.001412] smp: Bringing up secondary CPUs...
[ 0.001643] Detected VIPT I-cache on CPU1
[ 0.001664] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.001690] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.001952] Detected VIPT I-cache on CPU2
[ 0.001964] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[ 0.001975] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.002196] Detected VIPT I-cache on CPU3
[ 0.002206] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[ 0.002216] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.002243] smp: Brought up 1 node, 4 CPUs
[ 0.002257] SMP: Total of 4 processors activated.
[ 0.002260] CPU features: detected: 32-bit EL0 Support
[ 0.002263] CPU features: detected: CRC32 instructions
[ 0.002338] CPU: All CPU(s) started at EL2
[ 0.002349] alternatives: patching kernel code
[ 0.004700] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.004722] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.004832] pinctrl core: initialized pinctrl subsystem
[ 0.005399] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.005614] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.005646] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.005672] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.005896] thermal_sys: Registered thermal governor 'fair_share'
[ 0.005899] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.005902] thermal_sys: Registered thermal governor 'step_wise'
[ 0.005906] thermal_sys: Registered thermal governor 'user_space'
[ 0.006085] ASID allocator initialised with 65536 entries
[ 0.006331] pstore: Registered ramoops as persistent store backend
[ 0.006335] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.014746] cryptd: max_cpu_qlen set to 1000
[ 0.016446] SCSI subsystem initialized
[ 0.016528] libata version 3.00 loaded.
[ 0.017276] clocksource: Switched to clocksource arch_sys_counter
[ 0.017683] NET: Registered PF_INET protocol family
[ 0.017798] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.018377] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.018396] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.018404] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.018470] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.018642] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.018716] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.018743] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.018842] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.018861] PCI: CLS 0 bytes, default 64
[ 0.020644] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.022650] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.022663] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.044579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.045621] pwm-mediatek 10048000.pwm: clock: top fail: -517
[ 0.045893] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[ 0.045915] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[ 0.045924] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000
[ 0.045971] phy phy-soc:[email protected]: u3 auto load valid efuse: ENABLE with value: 1
[ 0.045999] phy phy-soc:[email protected]: pcie auto load valid efuse: ENABLE with value: 1
[ 0.046020] phy phy-soc:[email protected]: u3 lane1 efuse - intr 23, rx_imp e, tx_imp c
[ 0.046074] /soc/pcie@11280000: Failed to get clk index: 0 ret: -517
[ 0.046085] mtk-pcie-gen3 11280000.pcie: failed to get clocks
[ 0.048271] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.049814] printk: console [ttyS0] disabled
[ 0.069960] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 122, base_baud = 2500000) is a ST16650V2
[ 0.773612] printk: console [ttyS0] enabled
[ 0.798378] 11003000.serial: ttyS1 at MMIO 0x11003000 (irq = 123, base_baud = 1625000) is a ST16650V2
[ 0.808196] mtk_rng 1020f000.trng: registered RNG driver
[ 0.808256] hwrng: no data available
[ 0.817076] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.825039] loop: module loaded
[ 0.828232] Loading iSCSI transport class v2.0-870.
[ 0.834418] spi-nand spi0.0: Winbond SPI NAND was found.
[ 0.839740] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[ 0.847977] 4 fixed-partitions partitions found on MTD device spi0.0
[ 0.854314] Creating 4 MTD partitions on "spi0.0":
[ 0.859095] 0x000000580000-0x000008000000: "ubi"
[ 0.994880] 0x000000380000-0x000000580000: "fip"
[ 1.001962] 0x000000080000-0x000000380000: "reserved"
[ 1.010512] 0x000000000000-0x000000080000: "bl2"
[ 1.031903] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc009780000, irq 132
[ 1.041678] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc009780000, irq 132
[ 1.051200] i2c_dev: i2c /dev entries driver
[ 1.056803] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 1.065207] NET: Registered PF_INET6 protocol family
[ 1.070794] Segment Routing with IPv6
[ 1.074466] In-situ OAM (IOAM) with IPv6
[ 1.078429] NET: Registered PF_PACKET protocol family
[ 1.083494] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.096492] 8021q: 802.1Q VLAN Support v1.8
[ 1.101515] pstore: Using crash dump compression: deflate
[ 1.111960] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[ 1.119311] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[ 1.125563] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000
[ 1.134030] phy phy-soc:[email protected]: u3 auto load valid efuse: ENABLE with value: 1
[ 1.142126] phy phy-soc:[email protected]: pcie auto load valid efuse: ENABLE with value: 1
[ 1.150388] phy phy-soc:[email protected]: u3 lane1 efuse - intr 23, rx_imp e, tx_imp c
[ 1.165283] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.175110] mmc0: new high speed SDHC card at address 0001
[ 1.181377] mmcblk0: mmc0:0001 00000 29.8 GiB
[ 1.189395] Alternate GPT is invalid, using primary GPT.
[ 1.195355] FIT: Selected configuration: "config-mt7986a-bananapi-bpi-r3-snand" (OpenWrt bananapi_bpi-r3 with mt7986a-bananapi-bpi-r3-snand)
[ 1.207945] FIT: kernel sub-image 0x00001000..0x00519475 "kernel-1" (ARM64 OpenWrt Linux-5.15.79)
[ 1.217759] FIT: flat_dt sub-image 0x0051a000..0x00521fff "fdt-1" (ARM64 OpenWrt bananapi_bpi-r3 device tree blob)
[ 1.228960] FIT: flat_dt sub-image 0x00522000..0x00529fff "fdt-mt7986a-bananapi-bpi-r3-nor" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-nor)
[ 1.245102] FIT: flat_dt sub-image 0x0052a000..0x00531fff "fdt-mt7986a-bananapi-bpi-r3-emmc-nor" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-emmc-nor)
[ 1.262113] FIT: flat_dt sub-image 0x00532000..0x00539fff "fdt-mt7986a-bananapi-bpi-r3-emmc-snand" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-emmc-snand)
[ 1.279475] FIT: flat_dt sub-image 0x0053a000..0x00541fff "fdt-mt7986a-bananapi-bpi-r3-snand" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-snand)
[ 1.295958] FIT: filesystem sub-image 0x00542000..0x00a89fff "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r3 rootfs)
[ 1.306546] FIT: selecting configured loadable "rootfs-1" to be root filesystem
[ 1.313842] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p65(rootfs-1) p66(rootfs_data)
[ 1.379480] mtk-pcie-gen3 11280000.pcie: PCIe link down, ltssm reg val: 0x1000001
[ 1.386980] mtk-pcie-gen3: probe of 11280000.pcie failed with error -110
[ 1.416093] mt7530 mdio-bus:1f: configuring for fixed/2500base-x link mode
[ 1.423249] mt7530 mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 1.432190] mt7530 mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=140)
[ 1.451945] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=141)
[ 1.471507] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=142)
[ 1.491055] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=143)
[ 1.510600] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=144)
[ 1.521216] DSA: tree 0 setup
[ 1.526356] UBI: auto-attach mtd0
[ 1.529766] ubi0: default fastmap pool size: 45
[ 1.534280] ubi0: default fastmap WL pool size: 22
[ 1.539057] ubi0: attaching mtd0
[ 5.120136] ubi0: scanning is finished
[ 5.164970] ubi0: attached mtd0 (name "ubi", size 122 MiB)
[ 5.170462] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.177319] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.184084] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.191028] ubi0: good PEBs: 980, bad PEBs: 0, corrupted PEBs: 0
[ 5.197013] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 5.204214] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1642748947
[ 5.213324] ubi0: available PEBs: 465, total reserved PEBs: 515, PEBs reserved for bad PEB handling: 20
[ 5.222698] ubi0: background thread "ubi_bgt0d" started, PID 516
[ 5.228751] block ubiblock0_1: created from ubi0:1(rootfs)
[ 5.243580] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[ 5.250864] Freeing unused kernel memory: 384K
[ 5.297371] Run /sbin/init as init process
[ 5.301451] with arguments:
[ 5.304402] /sbin/init
[ 5.307092] with environment:
[ 5.310221] HOME=/
[ 5.312566] TERM=linux
[ 5.437782] init: Console is alive
[ 5.441274] init: - watchdog -
[ 5.747136] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.786367] usbcore: registered new interface driver usbfs
[ 5.791895] usbcore: registered new interface driver hub
[ 5.797221] usbcore: registered new device driver usb
[ 5.805920] phy phy-soc:[email protected]: u2 auto load valid efuse: ENABLE with value: 1
[ 5.814081] phy phy-soc:[email protected]: u3 auto load valid efuse: ENABLE with value: 1
[ 5.822219] phy phy-soc:[email protected]: u2 auto load valid efuse: ENABLE with value: 1
[ 5.830754] xhci-mtk 11200000.usb: xHCI Host Controller
[ 5.835975] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[ 5.846441] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010
[ 5.855620] xhci-mtk 11200000.usb: irq 126, io mem 0x11200000
[ 5.861440] xhci-mtk 11200000.usb: xHCI Host Controller
[ 5.866650] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[ 5.874030] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[ 5.881382] hub 1-0:1.0: USB hub found
[ 5.885134] hub 1-0:1.0: 2 ports detected
[ 5.889416] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.897731] hub 2-0:1.0: USB hub found
[ 5.901481] hub 2-0:1.0: 1 port detected
[ 5.907906] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.924016] init: - preinit -
[ 6.092133] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 6.100580] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 6.108859] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 6.121029] random: procd: uninitialized urandom read (4 bytes read)
[ 6.347277] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[ 6.527895] hub 1-1:1.0: USB hub found
[ 6.531710] hub 1-1:1.0: 4 ports detected
[ 8.633135] F2FS-fs (mmcblk0p66): Disable nat_bits due to incorrect cp_ver (4249969658229546126, 18446744073709551615)
[ 8.648631] F2FS-fs (mmcblk0p66): Mounted with checkpoint version = 8f5dc8e
[ 8.657542] mount_root: switching to f2fs overlay
[ 8.664295] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 8.675822] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 8.724964] procd: - early -
[ 8.727918] procd: - watchdog -
[ 9.261505] procd: - watchdog -
[ 9.293802] procd: - ubus -
[ 9.324372] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.348190] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.354644] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.362726] procd: - init -
[ 9.533349] urngd: v1.0.2 started.
[ 9.551676] random: crng init done
[ 9.552238] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.555081] random: 22 urandom warning(s) missed due to ratelimiting
[ 9.595240] i2c-gpio i2c-gpio-0: using lines 427 (SDA) and 428 (SCL)
[ 9.601890] i2c-gpio i2c-gpio-1: using lines 429 (SDA) and 430 (SCL)
[ 9.611542] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
[ 9.625439] Loading modules backported from Linux version v5.15.74-0-ga3f2f5ac9d61
[ 9.633017] Backport generated by backports.git v5.15.74-1-0-ge2d78967
[ 9.643275] sfp sfp1: Host maximum power 1.0W
[ 9.648443] sfp sfp2: Host maximum power 1.0W
[ 10.099772] mt7986-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20220113162701a
[ 10.099772]
[ 10.221377] mt7986-wmac 18000000.wmac: WM Firmware Version: ____000000, Build Time: 20220113162756
[ 10.297869] mt7986-wmac 18000000.wmac: WA Firmware Version: DEV_000000, Build Time: 20220113163034
[ 13.650763] PPP generic driver version 2.4.2
[ 13.655663] NET: Registered PF_PPPOX protocol family
[ 13.663095] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 15.339624] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 15.350975] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 15.359415] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 15.360471] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 15.375297] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.381765] br-lan: port 1(lan1) entered blocking state
[ 15.386978] br-lan: port 1(lan1) entered disabled state
[ 15.393800] device lan1 entered promiscuous mode
[ 15.398410] device eth0 entered promiscuous mode
[ 15.410676] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 15.420146] br-lan: port 2(lan2) entered blocking state
[ 15.425382] br-lan: port 2(lan2) entered disabled state
[ 15.432298] device lan2 entered promiscuous mode
[ 15.441402] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 15.450824] br-lan: port 3(lan3) entered blocking state
[ 15.456049] br-lan: port 3(lan3) entered disabled state
[ 15.463104] device lan3 entered promiscuous mode
[ 15.472047] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 15.481479] br-lan: port 4(lan4) entered blocking state
[ 15.486717] br-lan: port 4(lan4) entered disabled state
[ 15.494051] device lan4 entered promiscuous mode
[ 15.502945] mt7530 mdio-bus:1f sfp2: configuring for inband/2500base-x link mode
[ 15.511707] br-lan: port 5(sfp2) entered blocking state
[ 15.516924] br-lan: port 5(sfp2) entered disabled state
[ 15.524292] device sfp2 entered promiscuous mode
[ 15.533019] mtk_soc_eth 15100000.ethernet eth1: configuring for inband/2500base-x link mode
[ 15.543221] br-wan: port 1(eth1) entered blocking state
[ 15.548488] br-wan: port 1(eth1) entered disabled state
[ 15.553898] device eth1 entered promiscuous mode
[ 15.560020] br-wan: port 1(eth1) entered blocking state
[ 15.565253] br-wan: port 1(eth1) entered forwarding state
[ 15.572464] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
[ 15.581773] br-wan: port 2(wan) entered blocking state
[ 15.586903] br-wan: port 2(wan) entered disabled state
[ 15.593470] device wan entered promiscuous mode
[ 16.408168] br-wan: port 1(eth1) entered disabled state
[ 193.814602] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 193.822115] br-lan: port 1(lan1) entered blocking state
[ 193.827333] br-lan: port 1(lan1) entered forwarding state
[ 193.833162] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 287.891369] br-lan: port 1(lan1) entered disabled state
[ 287.896880] mt7530 mdio-bus:1f lan1: Link is Down
[ 293.081579] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 293.089077] br-lan: port 1(lan1) entered blocking state
[ 293.094287] br-lan: port 1(lan1) entered forwarding state
[ 301.101303] br-lan: port 1(lan1) entered disabled state
[ 301.106755] mt7530 mdio-bus:1f lan1: Link is Down
[ 304.282153] mt7530 mdio-bus:1f lan4: Link is Up - 1Gbps/Full - flow control rx/tx
[ 304.289655] br-lan: port 4(lan4) entered blocking state
[ 304.294864] br-lan: port 4(lan4) entered forwarding state
[ 307.904696] br-lan: port 4(lan4) entered disabled state
[ 307.907334] mt7530 mdio-bus:1f lan4: Link is Down
[ 310.835081] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 310.842499] br-wan: port 2(wan) entered blocking state
[ 310.847630] br-wan: port 2(wan) entered forwarding state
[ 386.456840] br-wan: port 2(wan) entered disabled state
[ 386.462097] mt7530 mdio-bus:1f wan: Link is Down
[ 389.659638] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 389.667059] br-wan: port 2(wan) entered blocking state
[ 389.672192] br-wan: port 2(wan) entered forwarding state
[ 390.411235] mt7530 mdio-bus:1f wan: Link is Down
[ 390.415902] br-wan: port 2(wan) entered disabled state
[ 450.869708] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 450.877127] br-wan: port 2(wan) entered blocking state
[ 450.882265] br-wan: port 2(wan) entered forwarding state
[ 475.624227] mt7530 mdio-bus:1f wan: Link is Down
[ 475.628906] br-wan: port 2(wan) entered disabled state
[ 478.524009] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 478.531561] br-lan: port 1(lan1) entered blocking state
[ 478.536788] br-lan: port 1(lan1) entered forwarding state