msg148300 - (view) |
Author: Brandon Rhodes (brandon-rhodes) * |
Date: 2011-11-25 03:11 |
The tarfile module should have a simple command line that allows it to be executed with "-m" — even if its only ability was to take a filename and extract it to the current directory, it could be a lifesaver on Windows machines where Python has been installed but nothing else. Would such a patch be welcome if I could write one up?
|
msg148301 - (view) |
Author: Ezio Melotti (ezio.melotti) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2011-11-25 03:18 |
The feature request seems reasonable to me, but this can only go in 3.3.
If you want to propose a patch, you might want to check the devguide and what other modules like zipfile do.
|
msg148389 - (view) |
Author: Lars Gustäbel (lars.gustaebel) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2011-11-26 10:37 |
This is no bad idea. I recommend keeping it as simple as possible. I would definitely not be supportive of a full tar clone. List, extract, create - that should be enough. There are two possible command line choices: do what the zipfile module does or emulate tar. I am in favor of the latter.
|
msg183354 - (view) |
Author: Éric Araujo (eric.araujo) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-03 02:21 |
Patch looks good! Some minor comments on Rietveld.
Could you add tests?
|
msg183356 - (view) |
Author: Raymond Hettinger (rhettinger) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-03 02:28 |
+1 for adding a CLI and +1 for keeping it minimal.
|
msg183363 - (view) |
Author: Ankur Ankan (Ankur.Ankan) * |
Date: 2013-03-03 04:25 |
I was also working on this issue so thought I should also submit my patch.
Has a few extra features from berker.peksag's patch:
1) the name of the files to be extracted can be specified
2) output directory can be specified for extracting files.
|
msg183507 - (view) |
Author: Berker Peksag (berker.peksag) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-05 00:50 |
> Patch looks good! Some minor comments on Rietveld.
Thanks for the review, Éric.
> Could you add tests?
Done.
Here's the new patch with Éric's comments addressed.
|
msg183656 - (view) |
Author: Ankur Ankan (Ankur.Ankan) * |
Date: 2013-03-07 13:17 |
Thanks for your comments Serhiy.
I have improved the patch according to your comments. Please have a look.
And I am writing tests.
|
msg183677 - (view) |
Author: Serhiy Storchaka (serhiy.storchaka) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-07 16:29 |
It will be good if Berker and Ankur will merge their patches. Ankur's patch has some very useful features, but Berker's patch looks more mature.
I prefer to emulate a subset of the tar utility interface too.
|
msg183682 - (view) |
Author: Éric Araujo (eric.araujo) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-07 16:40 |
I am more in favor of having something simple and similar to zipfile, like Lars, rather than following tar.
|
msg183684 - (view) |
Author: Serhiy Storchaka (serhiy.storchaka) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-07 16:48 |
This can confuse users. Note that even jar (which works with zip-like files) honors tar interface.
|
msg183688 - (view) |
Author: Éric Araujo (eric.araujo) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-07 17:12 |
Yeah, that’s always the discussion when writing a Python utility that has a unix equivalent: do you want to be familiar to Python users or to the unix tool users?
I don’t have a strong opinion. I think unix users would have no reason to use python -m tarfile, and windows users won’t have the expectation that the interface is the same as tar—unless they are unix people who are using a windows machine for whatever reason. If it were me, I’d just start with python -m tarfile --help, so I’d have no expectations :)
|
msg183722 - (view) |
Author: STINNER Victor (vstinner) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-08 02:26 |
+ parser.add_argument('--gz', '--gunzip', '--gzip', '--tgz', '-z',
+ '--ungzip', action = 'store_true',
+ help = 'gz compression')
+ parser.add_argument('--bz2', '--bzip2', '--tbz2', '--tbz', '--tb2',
+ action = 'store_true', help = 'bz2 compression')
+ parser.add_argument('--xz', '--lzma', action = 'store_true',
+ help = 'xz compression')
Do we really need so much names for the same option? Where do these names come from?
--
main() should exit after extract and create to only do one operation and don't always display the usage.
It would be better to not duplicate the list of options and use parser.print_help() instead of sys.stdout.write(__doc__).
Some consistency tests on exclusive options (bzip/gzip/lzma and list/create/extract) would be nice.
--
tar options on Linux:
-c, --create
-t, --list
-x, --extract, --get
-z, --gzip, --ungzip
-j, -I, --bzip
-C, --directory DIRECTORY
For tarfile, I propose to have a shorter list, and try to stay somehow compatible with tar:
-c, --create
-t, --list
-x, --extract
-z, --gzip
-j, --bzip
-C, --directory DIRECTORY
Users of the TAR format usually come from UNIX, so using the same command line options should not be so surprising.
I don't like the idea of an optional argument for --extract: "--extract file1 file2" is usually understood/read as "--extract=filename archive.tar". If you really think that we need to support "only extract some files", it should be a different option. Linux tar command has no such option. I propose to drop this feature (always extract all files).
|
msg183724 - (view) |
Author: Berker Peksag (berker.peksag) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-08 03:19 |
New patch(issue13477_v3.diff) attached.
Changes:
* Addressed comments from Serhiy
* Added "output" parameter to --extract option (from Ankur's patch)
* Updated tests and documentation
The current docstring of tarfile module does not give much
information(it just prints "Read from and write to tar format
archives.") so I skipped the -d option.
|
msg183725 - (view) |
Author: Ankur Ankan (Ankur.Ankan) * |
Date: 2013-03-08 04:12 |
> + parser.add_argument('--gz', '--gunzip', '--gzip', '--tgz', '-z',
> + '--ungzip', action = 'store_true',
> + help = 'gz compression')
> + parser.add_argument('--bz2', '--bzip2', '--tbz2', '--tbz', '-- tb2',
> + action = 'store_true', help = 'bz2 compression')
> + parser.add_argument('--xz', '--lzma', action = 'store_true',
> + help = 'xz compression')
> Do we really need so much names for the same option? Where do these > names come from?
I was trying to implement all the formats mentioned in Serhiy's review. (and also different names for the same format)
|
msg183739 - (view) |
Author: Éric Araujo (eric.araujo) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-08 15:04 |
> Users of the TAR format usually come from UNIX,
> so using the same command line options should not be so surprising.
Not sure about that: they could be Python users wanting to unpack a tarball sdist. That said, there is no harm in being compatible, and I like your small list of options.
FTR Lars said that he prefered compat with the zipfile CLI, which is:
Usage:
zipfile.py -l zipfile.zip # Show listing of a zipfile
zipfile.py -t zipfile.zip # Test if a zipfile is valid
zipfile.py -e zipfile.zip target # Extract zipfile into target dir
zipfile.py -c zipfile.zip src ... # Create zipfile from sources
|
msg183749 - (view) |
Author: Éric Araujo (eric.araujo) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-08 16:45 |
Did you get all the review comments? Some of them were made on older versions of the patch, and don’t seem to be addressed in the latest version. Thanks.
Ankur, could you submit a contributor agreement? http://www.python.org/psf/contrib/contrib-form/
|
msg183752 - (view) |
Author: Ankur Ankan (Ankur.Ankan) * |
Date: 2013-03-08 17:11 |
I am still unclear about the outcomes of the discussion. I am confused which features need to be kept and which are to be removed.
> Ankur, could you submit a contributor agreement?
I will submit it today.
|
msg184626 - (view) |
Author: Larry Hastings (larry) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-19 10:06 |
Modern tar programs don't need to be told the compression method--they infer it. If they can do it in C, we can do it in Python. So we should simply omit the "-bz2" stuff.
As for what the interface should look like, I'm definitely in favor of it looking like tar. unzip has the same interface on different platforms; so does 7zip, so does unrar. I think it's reasonable to expect that tar would take the same interface on different platforms. We don't need to coddle Windows users here. We're already expecting them to be sophisticated enough to handle the EOL conversion we're not doing for them.
|
msg184628 - (view) |
Author: Serhiy Storchaka (serhiy.storchaka) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-19 10:28 |
Note that --create command should support --directory option too.
> Modern tar programs don't need to be told the compression method--they infer it. If they can do it in C, we can do it in Python. So we should simply omit the "-bz2" stuff.
An archive may have no extension or have a nonstandard extension. And stdin/stdout does not have a name.
|
msg184644 - (view) |
Author: Larry Hastings (larry) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-19 17:10 |
Huh. tar *can* infer it from the data itself. On the other hand, it chooses explicitly not to.
% cat ~/Downloads/Python-3.3.0.tar.bz2| tar xvf -
tar: Archive is compressed. Use -j option
tar: Error is not recoverable: exiting now
% cat ~/Downloads/Python-3.3.0.tgz| tar xvf -
tar: Archive is compressed. Use -z option
tar: Error is not recoverable: exiting now
I guess "tar" knows explicit is better than implicit too ;-)
|
msg184729 - (view) |
Author: Brandon Rhodes (brandon-rhodes) * |
Date: 2013-03-20 03:04 |
Larry Hastings <[email protected]> writes:
> Huh. tar *can* infer it from the data itself. On the other hand, it
> chooses explicitly not to. I guess "tar" knows explicit is better
> than implicit too ;-)
I am told that the refusal of "tar" to introspect the data is because:
(a) Tar runs "gunzip -c" (for example) as an external program; it does
not actually compile against libz.
(b) Streams in UNIX cannot be rewound. Tar cannot look at the first
block of an input pipe and then "put the block back" so that the same
input can be fed directly to "gunzip" as its input.
(c) Given (a) and (b), tar could only support data introspection of
input from a pipe if it were willing to be a pass-through that, after
reading and introspecting the first block, then fired up "gunzip" and
sent ALL of the blocks through. Which would require multiprocessing,
threading, or async I/O so that tar could both read and write, which
would make tar more complicated.
(d) Therefore, tar refuses to even look.
Since Python does bundle compression in its standard library, it can
quite trivially step forward and actually do the data introspection that
tar insists on not doing; the first few bytes of a tar archive are quite
demonstrably different from the first bytes of a gzip stream, if I
recall.
|
msg184753 - (view) |
Author: STINNER Victor (vstinner) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-20 11:27 |
I don't think that we need to support compressing/decompressing using
the standard input/output.
2013/3/20 Brandon Craig Rhodes <[email protected]>:
>
> Brandon Craig Rhodes added the comment:
>
> Larry Hastings <[email protected]> writes:
>
>> Huh. tar *can* infer it from the data itself. On the other hand, it
>> chooses explicitly not to. I guess "tar" knows explicit is better
>> than implicit too ;-)
>
> I am told that the refusal of "tar" to introspect the data is because:
>
> (a) Tar runs "gunzip -c" (for example) as an external program; it does
> not actually compile against libz.
>
> (b) Streams in UNIX cannot be rewound. Tar cannot look at the first
> block of an input pipe and then "put the block back" so that the same
> input can be fed directly to "gunzip" as its input.
>
> (c) Given (a) and (b), tar could only support data introspection of
> input from a pipe if it were willing to be a pass-through that, after
> reading and introspecting the first block, then fired up "gunzip" and
> sent ALL of the blocks through. Which would require multiprocessing,
> threading, or async I/O so that tar could both read and write, which
> would make tar more complicated.
>
> (d) Therefore, tar refuses to even look.
>
> Since Python does bundle compression in its standard library, it can
> quite trivially step forward and actually do the data introspection that
> tar insists on not doing; the first few bytes of a tar archive are quite
> demonstrably different from the first bytes of a gzip stream, if I
> recall.
>
> ----------
>
> _______________________________________
> Python tracker <[email protected]>
> <http://bugs.python.org/issue13477>
> _______________________________________
|
msg184758 - (view) |
Author: Lars Gustäbel (lars.gustaebel) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-03-20 12:50 |
I'd like to re-emphasize that it is best to keep the whole thing as simple and straight-forward as possible. Offer some basic operations and that's it.
Although I am pretty accustomed to the original tar command line, I think we should copy zipfile's interface. It makes more sense to offer some kind of unified "Python" command line approach for archive access than keeping to old traditions.
I agree with Victor that we don't really need support for stdin/stdout. It only complicates matters.
If everybody still votes for stdin/stdout, I'd like to point out that tarfile supports compression detection for streams. It would be best to use mode="r|*" throughout because it works for both normal files and stdin. Use mode="w|(compression)" for writing to files and stdout accordingly.
If we do not support stdin/stdout we no longer need all these compression options because for reading we do autodetection and for writing we could deduce the compression from the file extension (which is just some kind of autodetection too).
Another side note: We should be aware of the effects discussed in issue17102 and issue1044. In my opinion tarfile as a library is obligated to behave like that, but maybe that's not acceptable for a command line tool.
|
msg186212 - (view) |
Author: Serhiy Storchaka (serhiy.storchaka) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-04-07 15:05 |
Then I propose to add an alternative tarfile command-line interface as Tools/scripts/tar.py for those who prefer a well-known and well-tested traditional interface.
|
msg195287 - (view) |
Author: Antoine Pitrou (pitrou) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-08-15 20:53 |
Regenerated patch against latest default (fixing conflicts).
|
msg198450 - (view) |
Author: Berker Peksag (berker.peksag) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-09-26 18:41 |
Thanks for the rebase, Antoine.
Here is an updated patch:
- Adressed Serhiy's comments. I didn't add a directory parameter to the
create command to keep the CLI simple.
- Added a test for dotless files
- Returned proper exit codes
|
msg199496 - (view) |
Author: Antoine Pitrou (pitrou) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-10-11 18:32 |
From a quick glance, the patch looks ok. Serhiy, do you want to review it any further?
|
msg199501 - (view) |
Author: Serhiy Storchaka (serhiy.storchaka) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-10-11 20:01 |
Yes, this is in my plans.
|
msg203062 - (view) |
Author: Serhiy Storchaka (serhiy.storchaka) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-11-16 16:37 |
I have added comments on Rietveld.
|
msg203510 - (view) |
Author: Berker Peksag (berker.peksag) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-11-20 17:10 |
Attached an updated patch that addresses Serhiy's comments. Thanks!
|
msg203993 - (view) |
Author: Serhiy Storchaka (serhiy.storchaka) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-11-23 12:54 |
I think Berker has misunderstood me. Here is a patch based on issue13477_v5.diff with some cherry-picked changes from issue13477_v6.diff and several other changes:
* --create, --extract, --list, and --test options are now mutual exclusive.
* --test now test a tarfile for integrity (as in the zipfile module).
* File names in output are printed now with repr().
* Now tarfile CLI now is silent by default. Added option -v (--verbose) to print more verbose output as in issue13477_v5.diff.
* Added helps for arguments.
* Fixed and enhanced tests,
I'm going to commit this patch at short time.
Known bugs:
* Help for --extract shows "--extract <tarfile> [<output_dir> ...]" instead of "--extract <tarfile> [<output_dir>]". --extract accepts only 1 to 2 arguments.
* --list fails with a tarfile containing unencodable file names. In particular it fails with test tarfiles in the test suite.
* Possible problems with unusual locales and file system encodings.
* Corrupted tarfiles produces tracebacks.
* Tests for --create should check that created tarfile contains correct files.
* Tests for --create should check that correct files are extracted.
* Needed tests for non-ASCII file names.
Besides all this I think the patch can be committed.
|
msg204134 - (view) |
Author: Roundup Robot (python-dev) ![Python triager (Python triager)](https://bugs.python.org/@@file/triager.png) |
Date: 2013-11-23 23:54 |
New changeset a5b6c8cbc473 by Serhiy Storchaka in branch 'default':
Issue #13477: Added command line interface to the tarfile module.
http://hg.python.org/cpython/rev/a5b6c8cbc473
|
msg204136 - (view) |
Author: Roundup Robot (python-dev) ![Python triager (Python triager)](https://bugs.python.org/@@file/triager.png) |
Date: 2013-11-24 00:32 |
New changeset 70b9d22b900a by Serhiy Storchaka in branch 'default':
Build a list of supported test tarfiles dynamically for CLI "test" command
http://hg.python.org/cpython/rev/70b9d22b900a
|
msg204233 - (view) |
Author: Serhiy Storchaka (serhiy.storchaka) * ![Python committer (Python committer)](https://bugs.python.org/@@file/committer.png) |
Date: 2013-11-24 16:32 |
> changeset: 87476:a539c85aec51
> user: Antoine Pitrou <[email protected]>
> date: Sun Nov 24 01:55:05 2013 +0100
> summary:
> Try to fix test_tarfile under Windows
Thank you Antoine.
|
msg213007 - (view) |
Author: Roundup Robot (python-dev) ![Python triager (Python triager)](https://bugs.python.org/@@file/triager.png) |
Date: 2014-03-10 01:35 |
New changeset 5b52db6fc7dc by R David Murray in branch 'default':
whatsnew: tarfile cli (#13477).
http://hg.python.org/cpython/rev/5b52db6fc7dc
|
|
Date |
User |
Action |
Args |
2022-04-11 14:57:24 | admin | set | github: 57686 |
2014-03-10 23:54:20 | pitrou | set | status: open -> closed assignee: lars.gustaebel -> resolution: fixed stage: commit review -> resolved |
2014-03-10 01:35:03 | python-dev | set | messages:
+ msg213007 |
2013-11-24 16:32:12 | serhiy.storchaka | set | messages:
+ msg204233 |
2013-11-24 00:32:46 | python-dev | set | messages:
+ msg204136 |
2013-11-23 23:54:31 | python-dev | set | nosy:
+ python-dev messages:
+ msg204134
|
2013-11-23 12:54:40 | serhiy.storchaka | set | files:
+ tarfile_cli.patch
messages:
+ msg203993 stage: patch review -> commit review |
2013-11-20 17:10:09 | berker.peksag | set | files:
+ issue13477_v6.diff
messages:
+ msg203510 |
2013-11-16 16:37:07 | serhiy.storchaka | set | messages:
+ msg203062 |
2013-10-11 20:01:11 | serhiy.storchaka | set | messages:
+ msg199501 |
2013-10-11 18:32:31 | pitrou | set | messages:
+ msg199496 |
2013-10-11 14:27:26 | berker.peksag | set | keywords:
+ needs review |
2013-09-26 18:41:52 | berker.peksag | set | files:
+ issue13477_v5.diff
messages:
+ msg198450 components:
+ Library (Lib) |
2013-08-15 20:53:29 | pitrou | set | files:
+ tarcli.patch
nosy:
+ pitrou messages:
+ msg195287
stage: needs patch -> patch review |
2013-04-07 15:05:00 | serhiy.storchaka | set | messages:
+ msg186212 |
2013-04-06 14:36:50 | berker.peksag | set | files:
- issue13477_v2.diff |
2013-04-06 14:36:35 | berker.peksag | set | files:
+ issue13477_v4.diff |
2013-03-20 12:50:43 | lars.gustaebel | set | messages:
+ msg184758 |
2013-03-20 11:27:10 | vstinner | set | messages:
+ msg184753 |
2013-03-20 03:04:10 | brandon-rhodes | set | messages:
+ msg184729 |
2013-03-19 17:10:14 | larry | set | messages:
+ msg184644 |
2013-03-19 10:28:37 | serhiy.storchaka | set | messages:
+ msg184628 |
2013-03-19 10:06:54 | larry | set | nosy:
+ larry messages:
+ msg184626
|
2013-03-08 17:11:24 | Ankur.Ankan | set | messages:
+ msg183752 |
2013-03-08 16:45:55 | eric.araujo | set | messages:
+ msg183749 |
2013-03-08 15:04:04 | eric.araujo | set | messages:
+ msg183739 |
2013-03-08 04:12:48 | Ankur.Ankan | set | messages:
+ msg183725 |
2013-03-08 03:20:55 | berker.peksag | set | files:
+ issue13477_v3.diff |
2013-03-08 03:20:30 | berker.peksag | set | files:
- issue13477_v3.diff |
2013-03-08 03:19:52 | berker.peksag | set | files:
- issue13477.diff |
2013-03-08 03:19:40 | berker.peksag | set | files:
+ issue13477_v3.diff
messages:
+ msg183724 |
2013-03-08 02:26:56 | vstinner | set | nosy:
+ vstinner messages:
+ msg183722
|
2013-03-07 17:12:13 | eric.araujo | set | messages:
+ msg183688 |
2013-03-07 16:48:26 | serhiy.storchaka | set | messages:
+ msg183684 |
2013-03-07 16:40:53 | eric.araujo | set | messages:
+ msg183682 |
2013-03-07 16:29:21 | serhiy.storchaka | set | messages:
+ msg183677 |
2013-03-07 13:17:27 | Ankur.Ankan | set | files:
+ issue_13477_v2
messages:
+ msg183656 |
2013-03-05 00:50:38 | berker.peksag | set | files:
+ issue13477_v2.diff
messages:
+ msg183507 |
2013-03-04 16:36:20 | serhiy.storchaka | set | nosy:
+ serhiy.storchaka
|
2013-03-03 04:25:19 | Ankur.Ankan | set | files:
+ issue_13477
messages:
+ msg183363 |
2013-03-03 02:28:51 | rhettinger | set | nosy:
+ rhettinger messages:
+ msg183356
|
2013-03-03 02:21:01 | eric.araujo | set | messages:
+ msg183354 |
2013-03-02 22:17:04 | berker.peksag | set | files:
+ issue13477.diff nosy:
+ berker.peksag keywords:
+ patch
|
2013-02-27 16:48:45 | Ankur.Ankan | set | nosy:
+ Ankur.Ankan
|
2012-10-08 22:28:59 | berker.peksag | set | versions:
+ Python 3.4, - Python 3.3 |
2012-10-04 16:39:29 | kyle | set | nosy:
+ kyle
|
2011-11-26 13:16:27 | eric.araujo | set | nosy:
+ eric.araujo
|
2011-11-26 10:37:48 | lars.gustaebel | set | priority: normal -> low assignee: lars.gustaebel messages:
+ msg148389
stage: test needed -> needs patch |
2011-11-25 03:18:28 | ezio.melotti | set | versions:
+ Python 3.3 nosy:
+ ezio.melotti, lars.gustaebel
messages:
+ msg148301
type: enhancement stage: test needed |
2011-11-25 03:11:05 | brandon-rhodes | create | |