Wikipedia

.dwg

"DWG" redirects here. For other uses, seeDWG (disambiguation).

DWG(fromdrawing) is aproprietary[3]binaryfile formatused for storing two- and three- dimensional design data andmetadata.It is the native format for severalCADpackages including DraftSight,AutoCAD,ZWCAD,IntelliCAD(and its variants),CaddieandOpen Design Alliancecompliant applications. In addition, DWG is supported non-natively by many other CAD applications. The.bak (drawing backup),.dws (drawing standards),.dwt (drawing template) and.sv$ (temporary automatic save) files are also DWG files.

DWG
Filename extension.dwg(plain)
.dws(standards)
.dwt(template)
Internet media typeimage/vnd.dwg[1]
Developed byAutodesk,Open Design Allianceand others
Initial release1982;42 years ago(1982)[2]
Type of formatComputer-aided design
Open format?Open but Proprietary[3]

Version history

edit
Version Internal version AutoCAD versions
DWG R1.0 MC0.0 AutoCAD Release 1.0
DWG R1.2 AC1.2 AutoCAD Release 1.2
DWG R1.40 AC1.40 AutoCAD Release 1.40
DWG R2.05 AC1.50 AutoCAD Release 2.05
DWG R2.10 AC2.10 AutoCAD Release 2.10
DWG R2.21 AC2.21 AutoCAD Release 2.21
DWG R2.22 AC1001, AC2.22 AutoCAD Release 2.22
DWG R2.50 AC1002 AutoCAD Release 2.50
DWG R2.60 AC1003 AutoCAD Release 2.60
DWG R9 AC1004 AutoCAD Release 9
DWG R10 AC1006 AutoCAD Release 10
DWG R11/12 AC1009 AutoCAD Release 11, AutoCAD Release 12
DWG R13 AC1012 AutoCAD Release 13
DWG R14 AC1014 AutoCAD Release 14
DWG 2000 AC1015 AutoCAD 2000, AutoCAD 2000i, AutoCAD 2002
DWG 2004 AC1018 AutoCAD 2004, AutoCAD 2005, AutoCAD 2006
DWG 2007 AC1021 AutoCAD 2007, AutoCAD 2008, AutoCAD 2009
DWG 2010 AC1024 AutoCAD 2010, AutoCAD 2011, AutoCAD 2012
DWG 2013 AC1027 AutoCAD 2013, AutoCAD 2014, AutoCAD 2015, AutoCAD 2016, AutoCAD 2017
DWG 2018 AC1032 AutoCAD 2018, AutoCAD 2019, AutoCAD 2020, AutoCAD 2021, AutoCAD 2022, AutoCAD 2023, AutoCAD 2024, AutoCAD 2025

History

edit

DWG (denoted by the.dwgfilename extension) was the native file format for theInteract CADpackage, developed by Mike Riddle in the late 1970s,[4]and subsequentlylicensedbyAutodeskin 1982 as the basis forAutoCAD.[5][6][7]From 1982 to 2009, Autodesk created versions of AutoCAD which wrote no fewer than 18 major variants of the DWG file format,[8]none of which is publicly documented.

The DWG format is probably the most widely used format for CAD drawings. Autodesk estimates that in 1998 there were in excess of two billion DWG files in existence.[9]

There are several claims to control of the DWG format.[10]As the biggest and most influential creator of DWG files it is Autodesk who designs, defines, and iterates the DWG format as the native format for their CAD applications. Autodesk sells a read/write library, called RealDWG,[11]under selective licensing terms for use in non-competitive applications. Several companies have attempted toreverse engineerAutodesk's DWG format, and offer software libraries to read and write Autodesk DWG files. The most successful isOpen Design Alliance,[12]a non-profit consortium created in 1998 by a number of software developers (including competitors to Autodesk), released a read/write/view library called theOpenDWGToolkit, which was based on the MarComp AUTODIRECT libraries.[13](ODA has since rewritten and updated that code.)

In 1998, Autodesk addedfile verificationto AutoCAD R14.01, through a function called DWGCHECK. This function was supported by an encrypted checksum and product code (called a "watermark" by Autodesk), written into DWG files created by the program.[14][15]In 2006 Autodesk modified AutoCAD 2007, to include "TrustedDWG technology", a function which would embed a text string within DWG files written by the program: "Autodesk DWG. This file is a Trusted DWG last saved by an Autodesk application or Autodesk licensed application."[16]This helped Autodesk software users ensure that the files they were opening were created by an Autodesk, or RealDWG application, reducing risk of incompatibilities.[17]AutoCAD would pop up a message, warning of potential stability problems, if a user opened a 2007 version DWG file which did not include this text string.

In 2008 theFree Software Foundationasserted the need for an open replacement for the DWG format, as neither RealDWG[11]norDWGdirectarelicensedon terms that arecompatiblewithfree software licenselike theGNU GPL.Therefore, the FSF placed the goal 'Replacement for OpenDWG libraries' in 10th place on their High Priority Free Software Projects list.[18]Created in late 2009,GNULibreDWG[19]is afree softwarelibrary released under the terms of theGNU GPLv3license. It can read DWG files from version R13 up to 2021, and write R2000 DWG files.

Also in 2008 Autodesk andBentley Systemsagreed on exchange of software libraries, including Autodesk RealDWG, to improve the ability to read and write the companies' respective DWG and DGN formats in mixed environments with greater fidelity. In addition, the two companies will facilitate work process interoperability between their AEC applications through supporting the reciprocal use of availableApplication Programming Interfaces(APIs).[20]

Autodesk trademark

edit

On November 13, 2006, Autodesk sued theOpen Design Alliancealleging that its DWGdirect libraries infringed Autodesk's trademark for the word "Autodesk", by writing the TrustedDWG watermark (including the word "AutoCAD" ) into DWG files it created.[21]Nine days later, Autodesk's attorneys won a broad and deeptemporary restraining orderagainst the Open Design Alliance.[22]In April 2007, the suit was settled, essentially on Autodesk's terms, with Autodesk modifying the warning message in AutoCAD 2008 (to make it somewhat less alarming), and the Open Design Alliance removing support for writing the TrustedDWG watermark from its DWGdirect libraries. The effect of the temporary restraining order and subsequent consent decree was to render the Open Design Alliance's DWGdirect libraries, from one point of view, incapable of creating DWG files that are 100% compatible with AutoCAD Unsubstantiated claim.[23]Others point out that the failure of "100% compatibility" means only that loading such a drawing triggers an essentially irrelevant warning message when the file is opened in AutoCAD.[24]

In 2006, Autodesk applied for registration of UStrademarkson "DWG",[25][26]"DWG EXTREME",[27]"DWG TRUECONVERT",[28]"REALDWG",[29]"DWGX",[30]"DWG TRUEVIEW".[31][32] As early as 1996, Autodesk has disclaimed exclusive use of the DWG mark in US trademark filings.[33]Out of these applications, only TRUSTEDDWG has been registered as a trademark by theUSPTO.The REALDWG and DWGX registrations were opposed by SolidWorks. The DWG EXTREME, DWG TRUECONVERT, and DWG TRUEVIEW trademark registration applications all received substantial resistance, with the USPTO examining attorney requiring Autodesk to disclaim exclusive use of DWG as a condition for their registration.

In a non-final action in May 2007, the USPTO examining attorney refused to register the two DWG marks, as they are "merely descriptive" of the use of DWG as a file format name. In September 2007, Autodesk responded, claiming that DWG has gained a "secondary meaning," separate from its use as a generic file format name.[34]

As of June 22, 2008, all of Autodesk's DWG-related trademark registration proceedings were suspended by the USPTO, pending disposition of trademark opposition and cancellation petitions Autodesk had filed against the Open Design Alliance and Dassault SystèmesSolidWorksCorporation. The USPTO office actions notifying Autodesk of this noted that Autodesk was not the exclusive source of files with the format name DWG, and Autodesk does not control the use of DWG by others, either as a trademark or as a file format name, among other points.

In 2006, Autodesk filed an opposition with the USPTO to the trademark registration of DWGGATEWAY bySolidWorks.[35]Autodesk subsequently filed a petition for cancellation of SolidWorks' trademark registration for DWGEDITOR.[36]In both cases, Autodesk's basis was that they had "been using the DWG name with its CAD software products since at least as early as 1983." The opposition and cancellation actions were consolidated, and suspended pending disposition of Autodesk'sUS District Courtsuit against SolidWorks.[37]

In early 2007, Autodesk petitioned the USPTO to cancel the Open Design Alliance's "OpenDWG" trademarks, claiming that they had been abandoned.[38]This cancellation action was suspended pending disposition of Autodesk's US District Court suit against SolidWorks.[39]

In 2008, Autodesk sued SolidWorks in US District Court, arguing that through its marketing efforts, the term "DWG" has lost its original generic meaning and taken on a secondary meaning referring specifically to Autodesk's proprietary drawing file format, and therefore any use of "DWG" in competitive products amounted to trademark infringement.[40]In January 2010, on the morning that trial was scheduled to begin, Autodesk and SolidWorks settled the suit, with SolidWorks acknowledging Autodesk's trademark rights for DWG, surrendering its trademark registrations for its DWG related projects, and withdrawing its opposition to Autodesk's DWG-related trademark registrations.[41]

In April 2010, Autodesk and the Open Design Alliance settled their suit, with the Open Design Alliance agreeing to cancel its DWG-based trademark registrations and cease use of DWG and DWG-based trademarks in its product marketing and branding.[42]Because there was no adjudication in either case, the agreements between the parties are not binding upon the USPTO. In March 2010, the Office of the Deputy Commissioner for Trademark Examination Policy at the USPTO determined that evidence submitted by the Open Design Alliance two years earlier was relevant and supported a reasonable ground for refusal to register DWG as a trademark.[43]

In June 2011 theUSPTOissued a final refusal[44]to register DWG as a trademark owned by Autodesk. They were quoted as saying:[45]

DWG is merely descriptive of applicant's goods under Section 2(e)(1) of the Trademark Act for two reasons: (1) DWG is a recognized abbreviation for "drawing," and (2).dwg is a file format used for computer-aided design (CAD) drawings made both with applicant's CAD software and others' CAD software.

Autodesk appealed the decision. TheUSPTOaffirmed in 2013 their refusal to recognise DWG as a trademark.[46]Despite this, Autodesk websites still claimed DWG as a trademark after the decision.[47]

In late 2014 Autodesk again lost, this time at the United States District Court for the Eastern District of Virginia. The judge dismissed all their arguments.[48]

In 2015 Autodesk's website has a section titleAbout DWG[49]in which they try to make a distinction between.dwg as a file format and theDWG technology environment.

DWG support in freemium and free software

edit

As neither RealDWG[11]nor DWGdirect are licensed on terms that are compatible withfree software licenseslike theGNU GPL,in 2008 theFree Software Foundationasserted the need for an open replacement for the DWG format. Therefore, the FSF placed the goal 'Replacement for OpenDWG libraries'[18]in 10th place on their High Priority Free Software Projects list.[50]Forked in late 2009 from libDWG,GNULibreDWG[19]can read all DWG files from version R13 on. But the LibreDWG library, offered under theGNU GPLv3,could initially not be used by most targetedFOSSgraphic software, such asFreeCAD,LibreCADandBlender,because of a GPLv2/GPLv3license incompatibility.[51][52][53]A GPLv2 licensed alternative is the libdxfrw project, which can read simple DWGs.[54]Some of these CAD licenses were only fixed recently to be able to use LibreDWG's GPLv3.

FreeCADis afree and open-sourceapplication that can work with the DWG files by using the proprietary ODA File Converter for.dwg and.dxf files from theOpen Design Alliance(ODA).[55]The ODA also provides a freeware stand-alone viewer for.dwg and.dgnfiles, ODA Drawings Explorer, which runs on Windows, Linux, and Mac OS X.

LibreCADis afree and open-source2D CAD application that can open DWG and DXF files using its own library.

Autodesk DWG TrueView is a freeware, closed source, stand-alone DWG viewer with DWG TrueConvert software included, built on the same viewing engine as AutoCAD software. The freeware Autodesk Design Review software adds a possibility to open DWG files in Design Review to take advantage of measure and markup capabilities, sheet set organization, and status tracking.

See also

edit

References

edit
  1. ^"Media Types".www.iana.org.RetrievedMay 6,2022.
  2. ^"What's up with DWG adoption in free software?".Libre Graphics World. Archived fromthe originalon November 9, 2016.RetrievedApril 15,2015.
  3. ^ab"Guides to Good Practice: Cad_3-2".Archaeology Data Service.RetrievedApril 15,2015.
  4. ^"Mike Riddle's Prehistoric AutoCAD - Retro Thing".Archivedfrom the original on June 29, 2009.RetrievedJune 11,2009.
  5. ^"Existing products".Archivedfrom the original on December 27, 2008.RetrievedJune 11,2009.
  6. ^The Autodesk File: Footnote
  7. ^"DigiBarn Stories: Mike Riddle & the Story of AutoCAD, EasyCAD, FastCAD & more".Archivedfrom the original on May 25, 2009.RetrievedJune 11,2009.
  8. ^"Autodesk blog".Archived fromthe originalon March 23, 2010.RetrievedMarch 30,2010.
  9. ^Autodesk, Inc."DWG Unplugged".Archived fromthe originalon January 19, 1998.With over two billion AutoCAD DWG files worldwide...
  10. ^DWG: The Registration Attempts & Successes from WorldCAD Access
  11. ^abcAutodesk - Developer Network - RealDWG
  12. ^Originally, OpenDWG Alliance."Open Design Alliance".Archivedfrom the original on May 28, 2007.RetrievedJune 21,2007.
  13. ^[1]ArchivedDecember 27, 2008, at theWayback Machine
  14. ^Between the Lines: How to identify some problem DWG files
  15. ^[2]ArchivedApril 17, 2007, at theWayback Machine
  16. ^This "TrustedDWG code" is encoded into DWG files in a fashion that is not humanly readable. This may be validated by using a binary editor to search a DWG file.
  17. ^Autodesk originally used the term "Trusted DWG", with an embedded space. They modified it removing the space, prior to filing a US trademark application in September 2006,tarr.uspto.gov
  18. ^abFSF promotes need for open DWG packages
  19. ^abGNU LibreDWG
  20. ^"Autodesk and Bentley to Advance AEC Software Interoperability".July 8, 2008. Archived fromthe originalon February 27, 2009.RetrievedJanuary 1,2009.
  21. ^"Autodesk v. ODA".Archived fromthe originalon October 26, 2008.RetrievedOctober 16,2008.
  22. ^"Autodesk v. ODA See line 35, Transcript".Archived fromthe originalon October 26, 2008.RetrievedOctober 16,2008.
  23. ^AutoCAD Unsubstantiated claim
  24. ^"Autodesk v. ODA See line 50, Consent Judgment".Archived fromthe originalon October 26, 2008.RetrievedOctober 16,2008.
  25. ^"Latest Status Info".Archivedfrom the original on June 11, 2008.RetrievedSeptember 10,2009.
  26. ^Latest Status Info
  27. ^Latest Status Info
  28. ^Latest Status Info
  29. ^Latest Status Info
  30. ^Latest Status Info
  31. ^Latest Status Info
  32. ^DWG TrueConverter USA.autodesk.com
  33. ^Latest Status Info
  34. ^United States Patent & Trademark Office
  35. ^"dwg#page1.tif"(PDF).Archived(PDF)from the original on February 8, 2017.RetrievedSeptember 10,2009.
  36. ^Ttabvue.uspto.gov
  37. ^Ttabvue.uspto.gov
  38. ^Ttabvue.uspto.gov
  39. ^Ttabvue.uspto.gov
  40. ^"Docket -> 3:08-cv-04397 (Autodesk v. SolidWorks)".Archived fromthe originalon September 23, 2009.RetrievedSeptember 10,2009.
  41. ^Complete text of Autodesk's press release - WorldCAD Access
  42. ^"ODA Members | Open Design Alliance".Archived fromthe originalon August 23, 2011.RetrievedApril 15,2010.
  43. ^United States Patent & Trademark Office
  44. ^"Latest Status Info".USPTO.RetrievedSeptember 24,2011.
  45. ^Grabowski, Ralph."WorldCAD Access".RetrievedSeptember 24,2011.
  46. ^"Summary of Final Decisions Issued by the Trademark Trial and Appeal Board".Official Gazette of the United States Patent and Trademark Office.1396:47. November 5, 2013.RetrievedJanuary 31,2014.
  47. ^"Service & Support: Viewers".Autodesk, Inc. Archived fromthe originalon January 31, 2014.RetrievedJanuary 31,2014.
  48. ^Grabowski, Ralph."upFront.eZine Issue #836".upfrontezine.com.Archived fromthe originalon November 29, 2014.RetrievedNovember 16,2014.
  49. ^"About DWG".Autodesk.com.Autodesk Inc.RetrievedFebruary 3,2015.
  50. ^Larabel, Michael (January 24, 2013)."FSF Wastes Away Another" High Priority "Project".Phoronix.RetrievedAugust 31,2019.
  51. ^"Is GPLv3 compatible with GPLv2?".Free Software Foundation.RetrievedAugust 31,2019.
  52. ^Prokoudine, Alexandre (January 26, 2012)."What's up with DWG adoption in free software?".Libre Graphics World.Archived fromthe originalon November 9, 2016.RetrievedAugust 31,2019.
  53. ^Prokoudine, Alexandre (December 27, 2012)."LibreDWG drama: the end or the new beginning?".Libre Graphics World.Archived fromthe originalon March 6, 2016.RetrievedAugust 31,2019.
  54. ^"libdxfrw/Home".Sourceforge.RetrievedAugust 31,2019.
  55. ^"FreeCAD and DWG Import on freecadweb.org".FreeCAD Web.November 11, 2014.RetrievedAugust 31,2019.
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=.dwg&oldid=1238738534"