The Advanced Target Pointer / Illuminator / Aiming Light,ATPIALAN/PEQ-15known colloquially as the "PEQ-15" [/pɛk//fɪftiːn/] produced byL3Harris(originally designed and manufactured byInsight Technology,until their acquisition byL3Harrisin 2010); is a multifunction IR Target Pointer & Illuminator,a.k.a.aLaser Aiming Module (LAM)for use as a rifle attachment, using aPicatinny railmounting system.[1][2]
| ATPIAL AN/PEQ-15 | |
|---|---|
 The ATPIAL (AN/PEQ-15) can be mounted to a firearm. | |
| Function(s) | Infrared Target Laser & Illuminator |
| Service history | |
| In service | 2003 – |
| Used by | |
| Wars | Global War on Terrorism Israeli–Palestinian conflict |
| Production history | |
| Designer | Insight Technology |
| Manufacturer | L3Harris |
| NSN |
|
| Unit cost | ~$2,000 USD |
| Variants |
|
| General Specifications | |
| Dimensions (L×H×W) | 120 mm (4.6 in) x 71 mm (2.8 in) x 41 mm (1.6 in) |
| Weight | 213 g (7.5 oz) |
| IR Laser Specifications | |
| IR Laser Class | IIIR (Low), IIIB (High) |
| IR Laser Output (mw) | Low:0.7 mW High:27.5 mW |
| IR Laser Divergence (mrad) | 0.5mrad |
| IR Laser Wavelength (nm) | (835 ± 15 nm) |
| Visible Laser Specifications | |
| Visible Laser Class | IIIB |
| Visible Laser Output (mw) | 5 mW |
| Visible Laser Divergence (mrad) | 0.5mrad |
| Visible Laser Wavelength (nm) | (635 ± 15 nm) |
| Visible Laser Range (m) | >25 m (82 ft) in direct sun |
| IR Illuminator Specifications | |
| IR Illuminator Class | IIIB |
| IR Illuminator Output (mw) | Low:3.5 mW High:45mW |
| IR Illuminator Divergence (mrad) | 1–105mrad(Adjustable lens) |
| IR Illuminator Wavelength (nm) | (835 ± 15 nm) |
| IR Illuminator Range (m) | Low:>600 m (1,969 ft) High:2,000 m (6,562 ft) |
The ATPIAL is designated using theJoint Electronics Type Designation System,and designated as:AN= Army/Navy.P= Portable.E= Laser.Q= Special or Combination.[3]
The PEQ-15 was brought into service in 2003 during theGlobal War on Terrorism.The PEQ-15 is the most widely used LAM on the market, having been the standard issue for American regular forces, and still the standard issue forUS Armyand theSOPMODkit,[1]however some military units are moving to the new L3HarrisAN/PEQ-16;with theUnited States Marine Corpsadopting the PEQ-16 with the adoption of theM27 Infantry Automatic Rifle,[4]and even more advanced LAMs being fielded by others, including the Australian Army that began moving to PEQ-16's in 2016 and supplementing infantry squads with theL3Harris Squad Rangefinder (SRF).[5]
Development
editThe ATPIAL AN/PEQ-15 is a multifunctional laser aiming module that emits both visible and IR laser light for precise weapon aiming and produces IR light with an Illuminator for target/area illumination. The module can be used as a handheld illuminator/pointer or can be mounted to weapons equipped with aMIL-STD-1913 (Picatinny Rail)rail mounting system, using the integrated M1913 rail grabber moulded into the body of the unit, eliminating the need for separate mounting hardware.
History
editDeveloped and brought into service in 2003 byInsight Technology,the AN/PEQ-15 was being adopted and issued to replace the PEQ-2.[6]TheAN/PEQ-2was first developed in the early 1990s, also by Insight Technology, and became the first widely issued LAM (laser aiming module), of theUS military,and other countries' ground forces. The expansion of theGWOTthrough the early 2000s quickly ballooned the defense budget of many nations, leading to an explosion in contracts for new technology being granted by the US government, including, an updated LAM and replacement for the AN/PEQ-2 being one such contract.[7]
Since its development the PEQ-15 is still the standard issue LAM for military units worldwide, nearly 20 years later. With hundreds of thousands of PEQ-15s in DoD (Department of Defense) inventory, they have since been adopted by Police and other Law Enforcement units across the United States, with the PEQ-15 becoming the most widely issued and battle tested laser aiming modules on the market. The successor to the PEQ-15, the AN/PEQ-16 is fast becoming popular among special forces and regular units around the world. TheUnited States Marine Corpshas shifted to the PEQ-16 with the change in rifle toH&K M27 IAR,as a standard attachment for all riflemen. The Australian Army has begun replacing their PEQ-15s with the updated PEQ-16, as the standard LAM to be fitted to the EF-88's extensive picatinny rails.[5]
A 'high power' and 'ultra high power' variant of the PEQ-15 was developed with the latter, the UHP LA-5C/PEQ becoming part of theSOPMODBlock II kit for SOF (Special Operations Forces) Weapon systems.[8]SOF have also now begun to move to the L3 Harris NGAL (Next Generation Aiming Laser) in conjunction with the Enhanced Night Vision Goggle-Binocular (ENVG-B).
Restrictions on sale
editFull power L3 Harris ATPIAL IR Lasers are restricted to Law Enforcement and Government customers only and cannot be sold to civilians. Sale and Purchase of IR Laser equipment can only occur at the department, agency, or unit level, and cannot be sold to individual Law Enforcement, Military, Government, or Contractor personnel due to the Class III IR laser and illuminator.[2]The AN/PEQ-15 is ITAR restricted and its export outside of the United States is strictly prohibited without a valid export license, prescribed in the International Traffic in Arms Regulation (ITAR).[2]
A lower powered "eye safe" model is available for sale to private citizens with a Class I IR laser and fixed focus illuminator as the ATPIAL-C.
Design details
editThe Advanced Target Pointer/ Illuminator/ Aiming Light (ATPIAL) AN/PEQ-15 was designed and built as the next generation weapon-mountable IR laser/Illuminator after the AN/PEQ-2 and PEQ-4, and in 2003 it became the battlefield replacement for the AN/PEQ-2A which served US Military Forces and Law Enforcement Agencies for many years. The PEQ-15 is almost half the weight and size of its predecessor with the added functionality of a visible laser.[9]The addition of the co-aligned and slaved visible laser is one of the key improvements of the ATPIAL over the PEQ-2, allowing for use without night vision devices. Because the lasers are co-aligned, the PEQ-15 has a single set of adjustment screws for windage and elevation, when zeroing one laser, it zeros both visible and IR. The addition of the visible laser allows a user to zero the PEQ-15 during the day without personnel needing any night vision/IR vision devices.
For the US Marine Corps the PEQ-15 replaced the PEQ-2 on the M16 series service rifles, until the adoption of theH&K M27 IARsaw Corps change to the updated MIPIM AN/PEQ-16. The US Army regular forces are still issued the AN/PEQ-15 and the Ultra High Power LA-5C/PEQ variant remains listed on the SOPMOD phase II kit for SOF (Special Operations Forces). The Australian Army has since moved to the AN/PEQ-16 and is currently fielding the L3Harris Squad Rangefinder (SRF) to supplement squad (section) sized elements.
The PEQ-15 has a low profile body, and midline offset laser diodes that allow it to be top mounted to a rifle (on to the top of the hand guard or receiver), without obstructing the view of modern optics, or the lasers being obstructed by the front sight posts of the M4, M16 or other AR-15 pattern rifles, whereby the lasers and illuminator pass either side of front sight post. The PEQ-15 has a rear-facing control dial, and battery compartment allowing users to control the functions of the PEQ from behind the rifle, and to replace the batteries of the unit without requiring the unit to be removed, potentially disturbing the zero of the lasers. Windage and Elevation are adjusted with low profile screws on the top and sides of the unit. Each adjustment produces a positive click. The adjustment requires tooling to adjust windage/elevation and the low-profile design keeps the adjustment points from catching in the field.[2]The PEQ-15A DBAL-A2 variant has forward facing battery compartment, with the rear of the unit being taken up with two function dials that face the user, with dials for power, and laser selection on each. The main functions of the functions of the PEQ-15 are:
- Visible Laser:The visible laser is a red laser that can be emitted from the unit with the press of the button. The visible red-dot can provide precise aiming of a weapon during daylight or night operations. There are higher power variants (HP LA-5A & UHP LA-5C) that provide a higher output Visible Laser for better view in the day. The Visible laser can only be used on its own, setting don't allow for it to be used with the IR laser or illuminator. The visible laser can be used to boresight the device to a weapon without the need of night vision goggles, as the lasers and illuminator are co-aligned, this zeroes all diode functions.[10]
- IR Laser:emits a tightly focused beam of IR light for precise aiming of the weapon while wearingnight vision goggles,or viewing the environment with an Infrared camera or weapon sights.
- IR Illuminator:provides additional IR illumination of a target or target area, it is operated through an adjustable lens with a turning bezel to vary the size of the illumination beam depending on target size and distance to the target, allowing adjustment from a flood light (105 mrad / °) mode to a single point spot-divergence (0.5 mrad / 0.029°) mode.
All variants of the PEQ-15 including the DBAL-A2 come included with a selection of Pattern Generator Filters (PGFs; also called Optical Instrument Reticles (OIR) by the DBAL-A2) that can be fitted to the units IR Illuminator and laser; in the case of the DBAL-A2 the illuminator and laser are separate from each other, and so different filters can be attached to either emitter; the PGF's can filter the laser or emitter into different shapes, including square, triangle, circle, cross, or T-shaped laser pointer; this may be useful for command and control purposes or to differentiate operators aiming point in the field, or during training.[11][12]
Operation
editThe AN/PEQ-15 is operated using a main mode selector dial located on the top of the unit, with 8 options to select (9 on the UHP and HP variants), each mode corresponds to a single, or a dual combination of functions, these modes are detailed in the table below. Once the mode has been selected, the activation of the pressure pad activates the function selected. The unit has an inbuilt switch, but it also has a remote cable switch socket to allow for a remote pressure pad to be located elsewhere on the rifle, in a natural position that can be activated while shooting; this may be on a forward grip, or the handguard in a position accessible while aiming the rifle.[13]
The AN/PEQ-15A DBAL-A2 by Steiner is of a different design, instead with two main function dials on the rear of the unit that face the operator when holding the weapon, the left dial selects the power and operation mode, and the right dial selects the specific laser/emitters to use. Similar to the L3 units, the Steiner DBAL-A2also has a safety screw to lockout the high-power modes. On the DBAL-A2 it is fitted to the left mode dial, locking out theMOM HI PWR[a]andON HI PWRselector options.[11]
The high-power settings of the lasers and illuminator are classified as Class IIIB lasers and have the potential to damage eyesight; as the PEQ-15s are used in training environments when doing blank-fire, force on force training, only the low power settings are to be used, with the safety screw protecting inadvertent activation of the laser at high. The use of high-power settings is only permitted during operations, or in live fire exercises at distances exceeding 220 m (720 ft).[2]All variants of the PEQ-15 are fitted with a blue-anodized safety screw within the mode selector dial, that physically locks out the high-power settings from being selected. The screw can be removed using a 3/32 "hex key; however as these items are controlled, the removal of the screw in military units must be done by the unit armorer or equivalent only at the direct of the unit commander.[12][11]The screw can be seen fitted in the images of the top of the PEQ-15.
| DIAL POSITION | MODE | DESCRIPTION[10] |
|---|---|---|
| VIS AL | Vis Aiming Laser | Visible Aim LaserON[b] |
| O | OFF | Prevents inadvertent laser burst |
| P | Program | Sets the desired IR pulse rate |
| AL | AIM LOW | IR Aiming Laser set toLOW |
| DL | DUAL LOW | IR Aiming Laser and Illuminator set toLOW |
| AH | AIM HIGH | IR Aiming Laser set toHIGH |
| IH | ILLUM HIGH | IR Illuminator set toHIGH |
| DH | DUAL HIGH | IR Aiming Laser and IR Illuminator set toHIGH |
- ^MOM HI PWR stands for Momentary High Power, meaning the emitter will only stay on while the operator holds the switch down, and will turn off immediately when the operator releases the switch. The ON HI PWR switch is an ON/OFF button that will turn the emitter on with one press, that will stay on until pressed again.
- ^On The LA-5A/B HP and LA-5C UHP this is the Visible Laser Low, and there is an extra setting position for Vis Laser High.
Variants
editL3Harris / Insight Tech.
editATPIAL AN/PEQ-15
editThe standard power PEQ-15 variant, with single power visible laser, and high and low, IR Laser and IR Illuminator module.
The low power modes can be used during force-on-force training, however the high-power modes should only be used on live fire ranges at ranges exceeding 220 meters.[2]The single visible laser power output of the standard power PEQ-15 of only 5 mW means the visible laser is only visible during the day of with a range of > 25 m (82 ft) when NOT in direct sunlight.
AN/PEQ-15 (tan), NSN:5855-01-577-7174|AN/PEQ-15 (black),NSN:5855-01-534-5931
LA-5B/PEQ | HP ATPIAL
editThe LA-5B/PEQ (formally,High PowerATPIAL (LA-5B/PEQ)) is the high-power variant of the PEQ-15, with a higher output visible laser, and IR Illuminator. The major benefit to the increase in the visible laser power is improved performance in direct sunlight, with six times more output power. The higher power IR illuminator allows users to use the illuminator as pointer being able to reach out to much farther distances.[14]
LA-5C/PEQ | UHP ATPIAL
editThe LA-5C/PEQ; formally,Ultra High PowerATPIAL (LA-5C/PEQ), is the ultra-high-power variant of the PEQ-15, which carries forward the same high output IR Illuminator and Visible Laser from the HP LA-5B/PEQ, but with the addition of a significantly higher output IR laser. The Ultra High Power variant is in use by theUnited States Special Operations Command(SOCOM) as part of theSOPMODBlock II accessory kit for SOCOM rifles, replacing the Block IAN/PEQ-2.[15][8]
Steiner-Defense
editAN/PEQ-15A – DBAL-A2
editThe AN/PEQ-15A – DBAL-A2 (Dual Beam Aiming Laser – Advanced-2) is an alternative of the L3Harris variants that is manufactured bySteiner Optics,and has the designation AN-PEQ-15A.
Like the L3Harris variants, the visible and IR aiming lasers on the DBAL-A2 are co-aligned with a single setting adjustment to windage and elevation to move and zero both beams, a soldier can use either the IR or Visible laser to boresight/zero the device to the rifle.[16][17]The Steiner DBAL-A2 variant was offered with two different visible laser wavelengths, with the standard being 635 nm (±3%) Red, and the alternative being the 532 nm Green visible laser.
Comparative Specifications
edit
| L3Harris / Insight Technologies | ||||
|---|---|---|---|---|
| AN/PEQ-15[a] | HP LA-5B/PEQ | UHP LA-5C/PEQ | AN/PEQ-15A DBAL-A2[17][11] | |
| Manufacturer | L3Harris | Steiner Optics | ||
| Dimensions | 117 × 71 × 41 mm / 4.6 "× 2.8" × 1.6 "(L×W×H) | 89 × 70 × 40.5 mm / 3.5 "× 2.75" × 1.59 "(L×W×H) | ||
| Weight | 213 g (7.5 oz) w/ battery | 227 g (8 oz) w/ Battery | ||
| Power | 1× 3V DL123A battery | 1 x DL 123A Battery | ||
| Battery Life | >6 hours (in Dual HighDHsetting) | >3 hours (mode dependent) | ||
| Waterproof | 6 m (20 ft) for 1 hour | Submersible to 5 m (16 ft) | ||
| Visible Laser | Visible Laser | |||
| Class | IIIB | IIIR (Low), IIIB (High) | IIIB | |
| Output | 5.0 mW | Low:3.5 mW High:30 mW |
<5 mW | |
| Divergence | 0.5 mrad | <0.8 mrad | ||
| Wavelength | Red (635 ± 15 nm) | Red (645 ± 20 nm) | Red (645 ± 20 nm) | Red (635 nm ± 3%)orGreen (532 nm)[16] |
| Range | Day:>25 m (82 ft)[b] | Day:>150 m (492 ft) Night:2,000 m (6,562 ft) |
Day:>175 m (574 ft) Night:3,000 m (9,843 ft) |
>25 m (82 ft) in day |
| IR Laser | IR Laser | |||
| Class | IIIR (Low), IIIB (High) | IIIR (Low), IIIB (High) | ||
| Output | Low:0.7 mW High:27.5 mW |
Low:0.7 mW High:50 mW |
<50 mW | |
| Divergence | ————— 0.5 mrad ————— | <0.8 mrad | ||
| Wavelength | ————— (835 ± 15 nm) ————— | 840 nm ± 3% | ||
| Range | Low:>600 m (1,969 ft) High:2,000 m (6,562 ft) |
Low:>600 m (1,969 ft) High:5,000 m (16,404 ft) |
High:2,500 metres (8,202 ft) | |
| IR Illuminator | IR Illuminator | |||
| Class | IIIB | IIIB | IIIB | IIIB |
| Output | Low:3.5 mW High:45 mW[19] |
Low:3.5 mW High:100 mW |
<50 mW | |
| Divergence | ————— 1—105 mRad (Adjustable lens) ————— | 1—100 mrad | ||
| Wavelength | ————— (835 ± 15 nm) ————— | 840 nm ± 3% | ||
| Range | Low:>600 m (1,969 ft) High:2,000 m (6,562 ft) |
Low:>600 m (1,969 ft) High:4,000 m (13,123 ft) |
Low:>600 m (1,969 ft) High:10,000 m (32,808 ft) |
High:2,500 metres (8,202 ft) |
Operators
editCurrent Operators
edit
Australia:AN/PEQ-15 used by Australian infantry and Special Forces on both theEF-88andSOCOMDM4A5 Carbine, the PEQ-15 is being phased out for the AN/PEQ-16B which will be supplemented at the squad level with the L3Harris Squad Rangefinder (SRF).[5][20]
New Zealand:Used on the New Zealand service rifle –LMTModular Assault Rifle System – Light (MARS-L).[21]
United States:In use by the US Military. The UHP LA-5C/PEQ is in use byUSSOCOMforces within the SOPMOD Block II kit.[15]
Islamic Emirate of Afghanistan (Taliban):After the withdrawal of American forces from Afghanistan in 2021, a large amount of American military equipment was captured by the Taliban, this included multiple night-vision/fighting devices, including night vision goggles and IR Laser Aiming Modules including the AN/PEQ-15.[22]
Los AngelesLAPD SWAT:Use the DBAL-A2 variant of the PEQ-15.
Russia:Russian security forces have been photographed with variants of the PEQ-15.
Gallery
edit-
An AN/PEQ-15 and the newer AN/PEQ-16, also made byL3Harris. -
AUS NavySEAL aims hisM4 carbinewith an attached LA-5C/PEQ as part of the SOPMOD Kit. -
A US Navy SEAL aiming hisCQBR,with attached UHP PE-5C/PEQ. -
Member ofAlpha Group,FSB (right) with anAK-105with an attached LA-5/PEQ to the top of hand guard. -
Two75th Ranger Regimentoperators armed with SOPMOD Block II variant M4A1 carbines with LA-5C/PEQs. -
LAPD SWAT Officers firingHK416assault riflesfitted with the DBAL-A2 variant of the PEQ-15, on the top of the hand guard. -
US Army10th Mountain Divisionsoldiers; (bottom‑left) AN/PEQ-15 attached to an M4 carbine; (bottom‑right) DBAL-A2 attached toM249 SAW. -
URG-I variantM4A1 carbinehasM-LOKrail handguard with an LA-5C/PEQ top rail used by one of theGreen Beretsfrom3rd SFG (A)during training atMarine Corps Air Ground Combat Center,Twentynine Palms,Californiain 2019.
See also
edit- AN/PEQ-1 SOFLAM– Laser Target Designator, Special Operations Forces Laser Acquisition Marker
- AN/PEQ-2– US Military Laser Aiming Module
- AN/PEQ-4- Infrared only Laser Aiming Module
- AN/PEQ-6– Laser Aiming Module for the H&K Mk. 23 – USSOCOM Offensive Handgun Weapon System (OHWS)
- AN/PEQ-5– Visible Laser Module for the M4 carbine
- AN/PEQ-16– Successor to the ATPIAL PEQ-15
- MEPRO STING– Dual Wavelength Laser Pointer
- SOPMOD– Special Operations Peculiar MODification accessory system
- List of military electronics of the United States
References
edit- ^ab"PEO Soldier | Portfolio – PM SMPT – Multifunctioning Aiming Light (MFAL), AN/PEQ-15, AN/PEQ-15A".www.peosoldier.army.mil.Retrieved2023-11-24.
- ^abcdef"L3Harris ATPIAL (AN/PEQ-15)".Tactical Night Vision Company.Retrieved2023-11-14.
- ^Sterk, Richard (2024-01-22)."U.S. Military AN Nomenclature Made Easy".Defense Security Monitor.Retrieved2024-07-02.
- ^Pike, Travis (2022-09-08)."Goodbye M16: A Look at the Modern Marine Infantry Rifle M27".www.pewpewtactical.com.Retrieved2023-11-24.
- ^abc"Australian Army Adopts L-3 Squad Laser Range Finder –".The Firearm Blog.2016-12-28.Retrieved2023-11-23.
- ^"PEO Soldier | Portfolio – PM SMPT – Multifunctioning Aiming Light (MFAL), AN/PEQ-15, AN/PEQ-15A".www.peosoldier.army.mil.Retrieved2023-11-23.
- ^"Review: AN/PEQ-15 ATPIAL Laser Aiming Module".Gloom Group.Retrieved2023-11-23.
- ^ab"United States Special Operations Command – Fiscal Year (FY) 2009 Budget Estimates | February 2008, Procurement, Defense-Wide"(PDF).2008-02-01. p. 186.Archived(PDF)from the original on 2023-11-17.Retrieved2023-11-17.
- ^Training Circular (TC) 3–22.9 – Rifle and Carbine, May 2016(PDF).Headquarters,Department of the Army.2016. p. 66.
- ^abTC 3–22.9 | Rifle and Carbine(PDF).Headquarters, Department of the Army.1 May 2016. pp. 3–23 to 3–25.
- ^abcdSteiner, Defense.Technical Manual AN PEQ 15 A DUAL BEAM AIMING LASER. Q 40090.Steiner Defence.
- ^abHAHO (2021-07-24)."Review - AN/PEQ-15 ATPIAL (Advanced Target Pointer Illuminator Aiming Laser)".HAHO.Retrieved2023-11-28.
- ^"L3Harris Remote Pressure Switch for ATPIAL Lasers".ownthenight.com.Retrieved2023-11-24.
- ^"L3Harris High-Power ATPIAL (LA-5B/PEQ)".Tactical Night Vision Company.Retrieved2023-11-23.
- ^abTaylor IV, Lucius A. "Gus"; Gatewood, Barry (8 May 2007)."USSOCOM SOPMOD – Miniature Day/Night Sight Development Program"(PDF).NDIA.Archived fromthe original(PDF)on 4 June 2022.Retrieved4 June2022.
- ^ab"AN/PEQ-15A DBAL-A3 Steiner – Will's Optics".Retrieved2023-11-23.
- ^ab"AN/PEQ-15A DBAL-A2".Steiner Defense.2015-01-16.Retrieved2023-11-12.
- ^"PEO Soldier | Portfolio – PM-SMPT – Multifunction Aiming Light (MFAL)".Retrieved2023-11-17.
- ^"AN/PEQ-15; ATPIAL Spec Sheet"(PDF).l3harris.com.Archived(PDF)from the original on 26 February 2023.Retrieved2023-11-11.
- ^"New night fighting edge under the Ninox replacement – Australian Defence Magazine".www.australiandefence.com.au.Retrieved2023-11-23.
- ^"Modular Assault Rifle System – Light (MARS-L)".www.nzdf.mil.nz.Retrieved2023-11-17.
- ^Vining, Miles (17 February 2019)."Night Vision Devices used by Taliban Forces - Small Arms Defense Journal".Small Arms Defense Journal.11(3).Retrieved28 November2023.