Thefield-effect transistor(FET) is a type oftransistorthat uses anelectric fieldto control the flow ofcurrentin asemiconductor.It comes in two types:junction FET(JFET) andmetal-oxide-semiconductor FET(MOSFET). FETs have three terminals:source,gate,anddrain.FETs control the flow of current by the application of a voltage to the gate, which in turn alters theconductivitybetween the drain and source.
![](https://upload.wikimedia.org/wikipedia/commons/thumb/4/44/FET_cross_section.svg/300px-FET_cross_section.svg.png)
FETs are also known asunipolar transistorssince they involve single-carrier-type operation. That is, FETs use eitherelectrons(n-channel) orholes(p-channel) ascharge carriersin their operation, but not both. Many different types of field effect transistors exist. Field effect transistors generally display veryhigh input impedanceat low frequencies. The most widely used field-effect transistor is theMOSFET(metal–oxide–semiconductor field-effect transistor).
History
editThe concept of a field-effect transistor (FET) was first patented by the Austro-Hungarian born physicistJulius Edgar Lilienfeldin 1925[1]and byOskar Heilin 1934, but they were unable to build a working practicalsemiconducting devicebased on the concept. Thetransistoreffect was later observed and explained byJohn BardeenandWalter Houser Brattainwhile working underWilliam ShockleyatBell Labsin 1947, shortly after the 17-year patent expired. Shockley initially attempted to build a working FET by trying to modulate the conductivity of asemiconductor,but was unsuccessful, mainly due to problems with thesurface states,thedangling bond,and thegermaniumandcoppercompound materials. In the course of trying to understand the mysterious reasons behind their failure to build a working FET, it led to Bardeen and Brattain instead inventing thepoint-contact transistorin 1947, which was followed by Shockley'sbipolar junction transistorin 1948.[2][3]
The first FET device to be successfully built was thejunction field-effect transistor(JFET).[2]A JFET was first patented byHeinrich Welkerin 1945.[4]Thestatic induction transistor(SIT), a type of JFET with a short channel, was invented by Japanese engineersJun-ichi Nishizawaand Y. Watanabe in 1950. Following Shockley's theoretical treatment on the JFET in 1952, a working practical JFET was built byGeorge C. DaceyandIan M. Rossin 1953.[5]However, the JFET still had issues affectingjunction transistorsin general.[6]Junction transistors were relatively bulky devices that were difficult to manufacture on amass-productionbasis, which limited them to a number of specialised applications. The insulated-gate field-effect transistor (IGFET) was theorized as a potential alternative to junction transistors, but researchers were unable to build working IGFETs, largely due to the troublesome surface state barrier that prevented the externalelectric fieldfrom penetrating into the material.[6]By the mid-1950s, researchers had largely given up on the FET concept, and instead focused onbipolar junction transistor(BJT) technology.[7]
The foundations of MOSFET technology were laid down by the work ofWilliam Shockley,John BardeenandWalter Brattain.Shockley independently envisioned the FET concept in 1945, but he was unable to build a working device. The next year Bardeen explained his failure in terms ofsurface states.Bardeen applied the theory of surface states on semiconductors (previous work on surface states was done by Shockley in 1939 andIgor Tammin 1932) and realized that the external field was blocked at the surface because of extra electrons which are drawn to the semiconductor surface. Electrons become trapped in those localized states forming an inversion layer. Bardeen's hypothesis marked the birth ofsurface physics.Bardeen then decided to make use of an inversion layer instead of the very thin layer of semiconductor which Shockley had envisioned in his FET designs. Based on his theory, in 1948 Bardeen patented the progenitor of MOSFET, an insulated-gate FET (IGFET) with an inversion layer. The inversion layer confines the flow of minority carriers, increasing modulation and conductivity, although its electron transport depends on the gate's insulator or quality of oxide if used as an insulator, deposited above the inversion layer. Bardeen's patent as well as the concept of an inversion layer forms the basis of CMOS technology today. In 1976 Shockley described Bardeen's surface state hypothesis "as one of the most significant research ideas in the semiconductor program".[8]
After Bardeen's surface state theory the trio tried to overcome the effect of surface states. In late 1947, Robert Gibney and Brattain suggested the use of electrolyte placed between metal and semiconductor to overcome the effects of surface states. Their FET device worked, but amplification was poor. Bardeen went further and suggested to rather focus on the conductivity of the inversion layer. Further experiments led them to replace electrolyte with a solid oxide layer in the hope of getting better results. Their goal was to penetrate the oxide layer and get to the inversion layer. However, Bardeen suggested they switch fromsilicontogermaniumand in the process their oxide got inadvertently washed off. They stumbled upon a completely different transistor, thepoint-contact transistor.Lillian Hoddesonargues that "had Brattain and Bardeen been working with silicon instead of germanium they would have stumbled across a successful field effect transistor".[8][9][10][11][12]
By the end of the first half of the 1950s, following theoretical and experimental work of Bardeen, Brattain, Kingston, Morrison and others, it became more clear that there were two types of surface states. Fast surface states were found to be associated with the bulk and a semiconductor/oxide interface. Slow surface states were found to be associated with the oxide layer because ofadsorptionof atoms, molecules and ions by the oxide from the ambient. The latter were found to be much more numerous and to have much longerrelaxation times.At the timePhilo Farnsworthand others came up with various methods of producing atomically clean semiconductor surfaces.
In 1955,Carl Froschand Lincoln Derrick accidentally covered the surface of siliconwaferwith a layer ofsilicon dioxide.They showed that oxide layer prevented certain dopants into the silicon wafer, while allowing for others, thus discovering thepassivatingeffect ofoxidationon the semiconductor surface. Their further work demonstrated how to etch small openings in the oxide layer to diffuse dopants into selected areas of the silicon wafer. In 1957, they published a research paper and patented their technique summarizing their work. The technique they developed is known as oxide diffusion masking, which would later be used in thefabricationof MOSFET devices.[13]At Bell Labs, the importance of Frosch's technique was immediately realized. Results of their work circulated around Bell Labs in the form of BTL memos before being published in 1957. AtShockley Semiconductor,Shockley had circulated the preprint of their article in December 1956 to all his senior staff, includingJean Hoerni.[6][14][15]
In 1955,Ian Munro Rossfiled a patent for aFeFETor MFSFET. Its structure was like that of a modern inversion channel MOSFET, but ferroelectric material was used as a dielectric/insulator instead of oxide. He envisioned it as a form of memory, years before thefloating gate MOSFET.In February 1957,John Wallmarkfiled a patent forFETin whichgermanium monoxidewas used as a gate dielectric, but he didn't pursue the idea. In his other patent filed the same year he described adouble gateFET. In March 1957, in his laboratory notebook, Ernesto Labate, a research scientist atBell Labs,conceived of a device similar to the later proposed MOSFET, although Labate's device didn't explicitly usesilicon dioxideas an insulator.[16][17][18][19]
Metal-oxide-semiconductor FET (MOSFET)
editIn 1955,Carl Froschand Lincoln Derrick accidentally grew a layer of silicon dioxide over the silicon wafer, for which they observedsurface passivationeffects.[20]By 1957 Frosch and Derrick, using masking and predeposition, were able to manufacture silicon dioxide transistors and showed that silicon dioxide insulated, protected silicon wafers and prevented dopants from diffusing into the wafer.[20][21]J.R. Ligenza and W.G. Spitzer studied the mechanism of thermally grown oxides and fabricated a high quality Si/SiO2stack in 1960.[22][23][24]
Following this research,Mohamed AtallaandDawon Kahngproposed a silicon MOS transistor in 1959[25]and successfully demonstrated a working MOS device with their Bell Labs team in 1960.[26][27]Their team included E. E. LaBate and E. I. Povilonis who fabricated the device; M. O. Thurston, L. A. D’Asaro, and J. R. Ligenza who developed the diffusion processes, and H. K. Gummel and R. Lindner who characterized the device.[28][29]
With itshigh scalability,[30]and much lower power consumption and higher density than bipolar junction transistors,[31]the MOSFET made it possible to buildhigh-densityintegrated circuits.[32]The MOSFET is also capable of handling higher power than the JFET.[33]The MOSFET was the first truly compact transistor that could be miniaturised and mass-produced for a wide range of uses.[6]The MOSFET thus became the most common type of transistor in computers, electronics,[34]andcommunications technology(such assmartphones).[35]TheUS Patent and Trademark Officecalls it a "groundbreaking invention that transformed life and culture around the world".[35]
CMOS(complementary MOS), a semiconductor device fabrication process for MOSFETs, was developed byChih-Tang SahandFrank WanlassatFairchild Semiconductorin 1963.[36][37]The first report of afloating-gate MOSFETwas made by Dawon Kahng andSimon Szein 1967.[38]Adouble-gateMOSFET was first demonstrated in 1984 byElectrotechnical Laboratoryresearchers Toshihiro Sekigawa and Yutaka Hayashi.[39][40]FinFET(fin field-effect transistor), a type of 3D non-planarmulti-gateMOSFET, originated from the research of Digh Hisamoto and his team atHitachi Central Research Laboratoryin 1989.[41][42]
Basic information
editFETs can be majority-charge-carrier devices, in which the current is carried predominantly by majority carriers, or minority-charge-carrier devices, in which the current is mainly due to a flow of minority carriers.[43]The device consists of an active channel through which charge carriers, electrons orholes,flow from the source to the drain. Source and drain terminal conductors are connected to the semiconductor throughohmic contacts.The conductivity of the channel is a function of the potential applied across the gate and source terminals.
The FET's three terminals are:[44]
- source (S), through which the carriers enter the channel. Conventionally, current entering the channel at S is designated by IS.
- drain (D), through which the carriers leave the channel. Conventionally, current leaving the channel at D is designated by ID.Drain-to-source voltage is VDS.
- gate (G), the terminal that modulates the channel conductivity. By applying voltage to G, one can control ID.
More about terminals
editAll FETs havesource,drain,andgateterminals that correspond roughly to theemitter,collector,andbaseofBJTs.Most FETs have a fourth terminal called thebody,base,bulk,orsubstrate.This fourth terminal serves tobiasthe transistor into operation; it is rare to make non-trivial use of the body terminal in circuit designs, but its presence is important when setting up thephysical layoutof anintegrated circuit.The size of the gate, lengthLin the diagram, is the distance between source and drain. Thewidthis the extension of the transistor, in the direction perpendicular to the cross section in the diagram (i.e., into/out of the screen). Typically the width is much larger than the length of the gate. A gate length of 1 μm limits the upper frequency to about 5 GHz, 0.2 μm to about 30 GHz.
The names of the terminals refer to their functions. The gate terminal may be thought of as controlling the opening and closing of a physical gate. This gate permits electrons to flow through or blocks their passage by creating or eliminating a channel between the source and drain. Electron-flow from the source terminal towards the drain terminal is influenced by an applied voltage. The body simply refers to the bulk of the semiconductor in which the gate, source and drain lie. Usually the body terminal is connected to the highest or lowest voltage within the circuit, depending on the type of the FET. The body terminal and the source terminal are sometimes connected together since the source is often connected to the highest or lowest voltage within the circuit, although there are several uses of FETs which do not have such a configuration, such astransmission gatesandcascodecircuits.
Unlike BJTs, the vast majority of FETs are electrically symmetrical. The source and drain terminals can thus be interchanged in practical circuits with no change in operating characteristics or function. This can be confusing when FET's appear to be connected "backwards" in schematic diagrams and circuits because the physical orientation of the FET was decided for other reasons, such as printed circuit layout considerations.
Effect of gate voltage on current
editThe FET controls the flow ofelectrons(orelectron holes) from the source to drain by affecting the size and shape of a "conductive channel" created and influenced by voltage (or lack of voltage) applied across the gate and source terminals. (For simplicity, this discussion assumes that the body and source are connected.) This conductive channel is the "stream" through which electrons flow from source to drain.
n-channel FET
editIn ann-channel"depletion-mode" device, a negative gate-to-source voltage causes adepletion regionto expand in width and encroach on the channel from the sides, narrowing the channel. If the active region expands to completely close the channel, the resistance of the channel from source to drain becomes large, and the FET is effectively turned off like a switch (see right figure, when there is very small current). This is called "pinch-off", and the voltage at which it occurs is called the "pinch-off voltage". Conversely, a positive gate-to-source voltage increases the channel size and allows electrons to flow easily (see right figure, when there is a conduction channel and current is large).
In an n-channel "enhancement-mode" device, a conductive channel does not exist naturally within the transistor, and a positive gate-to-source voltage is necessary to create one. The positive voltage attracts free-floating electrons within the body towards the gate, forming a conductive channel. But first, enough electrons must be attracted near the gate to counter the dopant ions added to the body of the FET; this forms a region with no mobile carriers called adepletion region,and the voltage at which this occurs is referred to as thethreshold voltageof the FET. Further gate-to-source voltage increase will attract even more electrons towards the gate which are able to create an active channel from source to drain; this process is calledinversion.
p-channel FET
editIn ap-channel"depletion-mode" device, a positive voltage from gate to body widens the depletion layer by forcing electrons to the gate-insulator/semiconductor interface, leaving exposed a carrier-free region of immobile, positively charged acceptor ions.
Conversely, in a p-channel "enhancement-mode" device, a conductive region does not exist and negative voltage must be used to generate a conduction channel.
Effect of drain-to-source voltage on channel
editFor either enhancement- or depletion-mode devices, at drain-to-source voltages much less than gate-to-source voltages, changing the gate voltage will alter the channel resistance, and drain current will be proportional to drain voltage (referenced to source voltage). In this mode the FET operates like a variable resistor and the FET is said to be operating in a linear mode or ohmic mode.[45][46]
If drain-to-source voltage is increased, this creates a significant asymmetrical change in the shape of the channel due to a gradient of voltage potential from source to drain. The shape of the inversion region becomes "pinched-off" near the drain end of the channel. If drain-to-source voltage is increased further, the pinch-off point of the channel begins to move away from the drain towards the source. The FET is said to be insaturation mode;[47]although some authors refer to it asactive mode,for a better analogy with bipolar transistor operating regions.[48][49]The saturation mode, or the region between ohmic and saturation, is used when amplification is needed. The in-between region is sometimes considered to be part of the ohmic or linear region, even where drain current is not approximately linear with drain voltage.
Even though the conductive channel formed by gate-to-source voltage no longer connects source to drain during saturation mode,carriersare not blocked from flowing. Considering again an n-channel enhancement-mode device, adepletion regionexists in the p-type body, surrounding the conductive channel and drain and source regions. The electrons which comprise the channel are free to move out of the channel through the depletion region if attracted to the drain by drain-to-source voltage. The depletion region is free of carriers and has a resistance similar tosilicon.Any increase of the drain-to-source voltage will increase the distance from drain to the pinch-off point, increasing the resistance of the depletion region in proportion to the drain-to-source voltage applied. This proportional change causes the drain-to-source current to remain relatively fixed, independent of changes to the drain-to-source voltage, quite unlike its ohmic behavior in the linear mode of operation. Thus, in saturation mode, the FET behaves as aconstant-current sourcerather than as a resistor, and can effectively be used as a voltage amplifier. In this case, the gate-to-source voltage determines the level of constant current through the channel.
Composition
editFETs can be constructed from various semiconductors, out of whichsiliconis by far the most common. Most FETs are made by using conventional bulk semiconductor processing techniques,using asingle crystal semiconductorwaferas the active region, or channel.
Among the more unusual body materials areamorphous silicon,polycrystalline siliconor other amorphous semiconductors inthin-film transistorsororganic field-effect transistors(OFETs) that are based onorganic semiconductors;often, OFET gate insulators and electrodes are made of organic materials, as well. Such FETs are manufactured using a variety of materials such as silicon carbide (SiC), gallium arsenide (GaAs), gallium nitride (GaN), and indium gallium arsenide (InGaAs).
In June 2011, IBM announced that it had successfully usedgraphene-based FETs in anintegrated circuit.[50][51]These transistors are capable of about 2.23 GHz cutoff frequency, much higher than standard silicon FETs.[52]
Types
editThe channel of a FET isdopedto produce either an n-typesemiconductoror a p-type semiconductor. The drain and source may be doped of opposite type to the channel, in the case of enhancement mode FETs, or doped of similar type to the channel as in depletion mode FETs. Field-effect transistors are also distinguished by the method of insulation between channel and gate. Types of FETs include:
- TheMOSFET(metal–oxide–semiconductor field-effect transistor) utilizes aninsulator(typicallySiO2) between the gate and the body. This is by far the most common type of FET.
- The DGMOSFET (dual-gate MOSFET) or DGMOS, a MOSFET with two insulated gates.
- The IGBT (insulated-gate bipolar transistor) is a device for power control. It has a structure akin to a MOSFET coupled with a bipolar-like main conduction channel. These are commonly used for the 200–3000 V drain-to-source voltage range of operation.Power MOSFETsare still the device of choice for drain-to-source voltages of 1 to 200 V.
- The JLNT (Junctionless nanowire transistor) is a type of Field-effect transistor (FET) which channel is one or multiple nanowires and does not present any junction.
- The MNOS (metal–nitride–oxide–semiconductor transistor) utilizes a nitride-oxide layerinsulatorbetween the gate and the body.
- TheISFET(ion-sensitive field-effect transistor) can be used to measure ion concentrations in a solution; when the ion concentration (such as H+,seepH electrode) changes, the current through the transistor will change accordingly.
- TheBioFET(Biologically sensitive field-effect transistor) is a class of sensors/biosensors based onISFETtechnology which are utilized to detect charged molecules; when a charged molecule is present, changes in the electrostatic field at the BioFET surface result in a measurable change in current through the transistor. These include enzyme modified FETs (EnFETs), immunologically modified FETs (ImmunoFETs), gene-modified FETs (GenFETs),DNAFETs,cell-based BioFETs (CPFETs), beetle/chip FETs (BeetleFETs), and FETs based on ion-channels/protein binding.[53]
- The DNAFET (DNA field-effect transistor) is a specialized FET that acts as abiosensor,by using a gate made of single-strand DNA molecules to detect matching DNA strands.
- finFET,includingGAAFETor gate-all-around FET, used on high density processor chips
- TheJFET(junction field-effect transistor) uses a reverse biased p–n junction to separate the gate from the body.
- Thestatic induction transistor(SIT) is a type of JFET with a short channel.
- The DEPFET is a FET formed in a fully depleted substrate and acts as a sensor, amplifier and memory node at the same time. It can be used as an image (photon) sensor.
- The FREDFET (fast-reverse or fast-recovery epitaxial diode FET) is a specialized FET designed to provide a very fast recovery (turn-off) of the body diode, making it convenient for drivinginductiveloads such aselectric motors,especially medium-poweredbrushless DC motors.
- The HIGFET (heterostructure insulated-gate field-effect transistor) is now used mainly in research.[54]
- The MODFET (modulation-doped field-effect transistor) is ahigh-electron-mobility transistorusing aquantum wellstructure formed by graded doping of the active region.
- The TFET (tunnel field-effect transistor) is based on band-to-band tunneling.[55]
- The TQFET (topological quantum field-effect transistor) switches a 2D material from dissipationlesstopological insulator('on' state) to conventional insulator ('off' state) using an applied electric field.[56]
- TheHEMT(high-electron-mobility transistor), also called a HFET (heterostructure FET), can be made usingbandgap engineeringin a ternary semiconductor such asAlGaAs.The fully depleted wide-band-gap material forms the isolation between gate and body.
- TheMESFET(metal–semiconductor field-effect transistor) substitutes thep–n junctionof the JFET with aSchottky barrier;and is used in GaAs and otherIII-V semiconductormaterials.
- TheNOMFETis ananoparticleorganic memory field-effect transistor.[57]
- The GNRFET (graphene nanoribbon field-effect transistor) uses agraphene nanoribbonfor its channel.[58]
- The VeSFET (vertical-slit field-effect transistor) is a square-shaped junctionless FET with a narrow slit connecting the source and drain at opposite corners. Two gates occupy the other corners, and control the current through the slit.[59]
- The CNTFET (carbon nanotube field-effect transistor).
- The OFET (organic field-effect transistor) uses an organic semiconductor in its channel.
- The QFET (quantum field effect transistor) takes advantage of quantum tunneling to greatly increase the speed of transistor operation by eliminating the traditional transistor's area of electron conduction.
- The SB-FET (Schottky-barrier field-effect transistor) is a field-effect transistor with metallic source and drain contact electrodes, which createSchottky barriersat both the source-channel and drain-channel interfaces.[60][61]
- The GFET is a highly sensitive graphene-based field effect transistor used asbiosensorsandchemical sensors.Due to the 2 dimensional structure of graphene, along with its physical properties, GFETs offer increased sensitivity, and reduced instances of 'false positives' in sensing applications[62]
- TheFe FETuses aferroelectricbetween the gate, allowing the transistor to retain its state in the absence of bias - such devices may have application asnon-volatile memory.
- VTFET, orVertical-Transport Field-Effect Transistor,IBM's 2021 modification offinFETto allow higher density and lower power.[63]
Advantages
editField-effect transistors have high gate-to-drain current resistance, of the order of 100 MΩ or more, providing a high degree of isolation between control and flow. Because base current noise will increase with shaping time[clarification needed],[64]a FET typically produces less noise than abipolar junction transistor(BJT), and is found in noise-sensitive electronics such as tuners andlow-noise amplifiersforVHFand satellite receivers. It exhibits no offset voltage at zero drain current and makes an excellent signal chopper. It typically has better thermal stability than a BJT.[44]
Because the FETs are controlled by gate charge, once the gate is closed or open, there is no additional power draw, as there would be with abipolar junction transistoror with non-latchingrelaysin some states. This allows extremely low-power switching, which in turn allows greater miniaturization of circuits because heat dissipation needs are reduced compared to other types of switches.
Disadvantages
editA field-effect transistor has a relatively lowgain–bandwidth productcompared to a bipolar junction transistor. MOSFETs are very susceptible to overload voltages, thus requiring special handling during installation.[65]The fragile insulating layer of the MOSFET between the gate and the channel makes it vulnerable toelectrostatic dischargeor changes to threshold voltage during handling. This is not usually a problem after the device has been installed in a properly designed circuit.
FETs often have a very low "on" resistance and have a high "off" resistance. However, the intermediate resistances are significant, and so FETs can dissipate large amounts of power while switching. Thus, efficiency can put a premium on switching quickly, but this can cause transients that can excite stray inductances and generate significant voltages that can couple to the gate and cause unintentional switching. FET circuits can therefore require very careful layout and can involve trades between switching speed and power dissipation. There is also a trade-off between voltage rating and "on" resistance, so high-voltage FETs have a relatively high "on" resistance and hence conduction losses.[66]
Failure modes
editField-effect transistors are relatively robust, especially when operated within the temperature and electrical limitations defined by the manufacturer (properderating). However, modern FET devices can often incorporate abody diode.If the characteristics of the body diode are not taken into consideration, the FET can experience slow body diode behavior, where a parasitic transistor will turn on and allow high current to be drawn from drain to source when the FET is off.[67]
Uses
editThe most commonly used FET is theMOSFET.TheCMOS(complementary metal oxide semiconductor) process technology is the basis for moderndigitalintegrated circuits.Thisprocess technologyuses an arrangement where the (usually "enhancement-mode" ) p-channel MOSFET and n-channel MOSFET are connected in series such that when one is on, the other is off.
In FETs, electrons can flow in either direction through the channel when operated in the linear mode. The naming convention of drain terminal and source terminal is somewhat arbitrary, as the devices are typically (but not always) built symmetrical from source to drain. This makes FETs suitable for switching analog signals between paths (multiplexing). With this concept, one can construct a solid-statemixing board,for example. FET is commonly used as an amplifier. For example, due to its large input resistance and low output resistance, it is effective as a buffer incommon-drain(source follower) configuration.
IGBTs are used in switching internal combustion engine ignition coils, where fast switching and voltage blocking capabilities are important.
Source-gated transistor
editSource-gated transistors are more robust to manufacturing and environmental issues in large-area electronics such as display screens, but are slower in operation than FETs.[68]
See also
editReferences
edit- ^Lilienfeld, J.E."Method and apparatus for controlling electric current"Archived2022-04-09 at theWayback MachineUS Patent no. 1,745,175 (filed: 8 October 1926; issued: 28 January 1930).
- ^abLee, Thomas H. (2003).The Design of CMOS Radio-Frequency Integrated Circuits(PDF).Cambridge University Press.ISBN978-1-139-64377-1.Archived fromthe original(PDF)on 2019-12-09.Retrieved2019-07-20.
- ^Puers, Robert; Baldi, Livio; Voorde, Marcel Van de; Nooten, Sebastiaan E. van (2017).Nanoelectronics: Materials, Devices, Applications, 2 Volumes.John Wiley & Sons.p. 14.ISBN978-3-527-34053-8.
- ^Grundmann, Marius (2010).The Physics of Semiconductors.Springer-Verlag.ISBN978-3-642-13884-3.
- ^Nishizawa, Jun-Ichi (1982). "Junction Field-Effect Devices". In Sittig, Roland; Roggwiller, P. (eds.).Semiconductor Devices for Power Conditioning.Springer. pp. 241–272.doi:10.1007/978-1-4684-7263-9_11.ISBN978-1-4684-7265-3.
- ^abcdMoskowitz, Sanford L. (2016).Advanced Materials Innovation: Managing Global Technology in the 21st century.John Wiley & Sons.p. 168.ISBN978-0-470-50892-3.
- ^"The Foundation of Today's Digital World: The Triumph of the MOS Transistor".Computer History Museum.13 July 2010.Retrieved21 July2019.
- ^abHoward R. Duff (2001). "John Bardeen and transistor physics".AIP Conference Proceedings.Vol. 550. pp. 3–32.doi:10.1063/1.1354371.
- ^Hans Camenzind(2005).Designing Analog Chips.
- ^Massoud, Hisham Z. (1997).ULSI Science and Technology/1997.The Electrochemical Society. p. 43.ISBN978-1-56677-130-6.
- ^Lillian Hoddeson(1994). "Research on crystal rectifiers during World War II and the invention of the transistor".History and Technology.11(2): 121–130.doi:10.1080/07341519408581858.
- ^Michael Riordan; Lillian Hoddeson (1997).Crystal Fire: The Birth of the Information Age.W. W. Norton & Company.ISBN978-0-393-04124-8.
- ^abFrosch, C. J.; Derick, L (1957)."Surface Protection and Selective Masking during Diffusion in Silicon".Journal of The Electrochemical Society.104(9): 547.doi:10.1149/1.2428650.
- ^Christophe Lécuyer; David C. Brook; Jay Last (2010).Makers of the Microchip: A Documentary History of Fairchild Semiconductor.MIT Press. pp. 62–63.ISBN978-0-262-01424-3.
- ^Claeys, Cor L. (2003).ULSI Process Integration III: Proceedings of the International Symposium.The Electrochemical Society.pp. 27–30.ISBN978-1-56677-376-8.
- ^Lojek, Bo (2007).History of Semiconductor Engineering.Springer Science & Business Media. p. 324.ISBN978-3-540-34258-8.
- ^Stefan Ferdinand Müller (2016).Development of HfO2-Based Ferroelectric Memories for Future CMOS Technology Nodes.ISBN978-3-7392-4894-3.
- ^B.G Lowe; R.A. Sareen (2013).Semiconductor X-Ray Detectors.CRC Press.ISBN978-1-4665-5401-6.
- ^Bassett, Ross Knox (2007).To the Digital Age: Research Labs, Start-up Companies, and the Rise of MOS Technology.Johns Hopkins University Press. p. 22.ISBN978-0-8018-8639-3.
- ^abHuff, Howard; Riordan, Michael (2007-09-01)."Frosch and Derick: Fifty Years Later (Foreword)".The Electrochemical Society Interface.16(3): 29–29.doi:10.1149/2.F02073IF.ISSN1064-8208.
- ^Frosch, C. J.; Derick, L (1957)."Surface Protection and Selective Masking during Diffusion in Silicon".Journal of The Electrochemical Society.104(9): 547.doi:10.1149/1.2428650.
- ^Ligenza, J. R.; Spitzer, W. G. (1960-07-01)."The mechanisms for silicon oxidation in steam and oxygen".Journal of Physics and Chemistry of Solids.14:131–136.doi:10.1016/0022-3697(60)90219-5.ISSN0022-3697.
- ^Deal, Bruce E. (1998)."Highlights Of Silicon Thermal Oxidation Technology".Silicon materials science and technology.The Electrochemical Society.p. 183.ISBN978-1566771931.
- ^Lojek, Bo (2007).History of Semiconductor Engineering.Springer Science & Business Media. p. 322.ISBN978-3540342588.
- ^Bassett, Ross Knox (2007).To the Digital Age: Research Labs, Start-up Companies, and the Rise of MOS Technology.Johns Hopkins University Press.pp. 22–23.ISBN978-0-8018-8639-3.
- ^Atalla, M.;Kahng, D.(1960). "Silicon-silicon dioxide field induced surface devices".IRE-AIEE Solid State Device Research Conference.
- ^"1960 – Metal Oxide Semiconductor (MOS) Transistor Demonstrated".The Silicon Engine.Computer History Museum.Retrieved2023-01-16.
- ^KAHNG, D. (1961)."Silicon-Silicon Dioxide Surface Device".Technical memorandum of Bell Laboratories.
- ^Lojek, Bo (2007).History of Semiconductor Engineering.Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg. p. 321.ISBN978-3-540-34258-8.
- ^Motoyoshi, M. (2009). "Through-Silicon Via (TSV)".Proceedings of the IEEE.97(1): 43–48.doi:10.1109/JPROC.2008.2007462.ISSN0018-9219.S2CID29105721.
- ^"Transistors Keep Moore's Law Alive".EETimes.12 December 2018.Retrieved18 July2019.
- ^"Who Invented the Transistor?".Computer History Museum.4 December 2013.Retrieved20 July2019.
- ^Duncan, Ben (1996).High Performance Audio Power Amplifiers.Elsevier.p. 177.ISBN978-0-08-050804-7.
- ^"Dawon Kahng".National Inventors Hall of Fame.Retrieved27 June2019.
- ^ab"Remarks by Director Iancu at the 2019 International Intellectual Property Conference".United States Patent and Trademark Office.June 10, 2019.Retrieved20 July2019.
- ^"1963: Complementary MOS Circuit Configuration is Invented".Computer History Museum.Retrieved6 July2019.
- ^U.S. patent 3,102,230,filed in 1960, issued in 1963
- ^D. Kahng and S. M. Sze, "A floating gate and its application to memory devices",The Bell System Technical Journal,vol. 46, no. 4, 1967, pp. 1288–1295
- ^Colinge, J.P. (2008).FinFETs and Other Multi-Gate Transistors.Springer Science & Business Media. p. 11.ISBN978-0-387-71751-7.
- ^Sekigawa, Toshihiro; Hayashi, Yutaka (1 August 1984). "Calculated threshold-voltage characteristics of an XMOS transistor having an additional bottom gate".Solid-State Electronics.27(8): 827–828.Bibcode:1984SSEle..27..827S.doi:10.1016/0038-1101(84)90036-4.ISSN0038-1101.
- ^"IEEE Andrew S. Grove Award Recipients".IEEE Andrew S. Grove Award.Institute of Electrical and Electronics Engineers.Retrieved4 July2019.[dead link]
- ^"The Breakthrough Advantage for FPGAs with Tri-Gate Technology"(PDF).Intel.2014.Retrieved4 July2019.
- ^Jacob Millman(1985).Electronic devices and circuits.Singapore:McGraw-Hill International.p. 397.ISBN978-0-07-085505-2.
- ^abJacob Millman (1985).Electronic devices and circuits.Singapore: McGraw-Hill. pp. 384–385.ISBN978-0-07-085505-2.
- ^ Galup-Montoro, C.; Schneider, M.C. (2007).MOSFET modeling for circuit analysis and design.London/Singapore:World Scientific.p.83.ISBN978-981-256-810-6.
- ^Norbert R Malik (1995).Electronic circuits: analysis, simulation, and design.Englewood Cliffs, NJ: Prentice Hall. pp. 315–316.ISBN978-0-02-374910-0.
- ^ Spencer, R.R.; Ghausi, M.S. (2001).Microelectronic circuits.Upper Saddle River NJ: Pearson Education/Prentice-Hall. p. 102.ISBN978-0-201-36183-4.
- ^ Sedra, A. S.; Smith, K.C. (2004).Microelectronic circuits(Fifth ed.). New York: Oxford University Press. p.552.ISBN978-0-19-514251-8.
- ^ PR Gray; PJ Hurst; SH Lewis; RG Meyer (2001).Analysis and design of analog integrated circuits(Fourth ed.). New York: Wiley. pp. §1.5.2 p. 45.ISBN978-0-471-32168-2.
- ^Bob Yirka (10 January 2011)."IBM creates first graphene based integrated circuit".Phys.org.Retrieved14 January2019.
- ^Lin, Y.-M.; Valdes-Garcia, A.; Han, S.-J.; Farmer, D. B.; Sun, Y.; Wu, Y.; Dimitrakopoulos, C.; Grill, A; Avouris, P; Jenkins, K. A. (2011). "Wafer-Scale Graphene Integrated Circuit".Science.332(6035): 1294–1297.Bibcode:2011Sci...332.1294L.doi:10.1126/science.1204428.PMID21659599.S2CID3020496.
- ^Belle Dumé (10 December 2012)."Flexible graphene transistor sets new records".Physics World.Retrieved14 January2019.
- ^Schöning, Michael J.; Poghossian, Arshak (2002)."Recent advances in biologically sensitive field-effect transistors (BioFETs)"(PDF).Analyst.127(9): 1137–1151.Bibcode:2002Ana...127.1137S.doi:10.1039/B204444G.PMID12375833.
- ^freepatentsonline.com,HIGFET and method - Motorola]
- ^Ionescu, A. M.;Riel, H.(2011). "Tunnel field-effect transistors as energy-efficient electronic switches".Nature.479(7373): 329–337.Bibcode:2011Natur.479..329I.doi:10.1038/nature10679.PMID22094693.S2CID4322368.
- ^Dumé, Isabelle (12 December 2018)."Topological off-on switch could make new type of transistor".Physics World.IOP Publishing.Retrieved16 January2022.
- ^"Organic transistor paves way for new generations of neuro-inspired computers".ScienceDaily.January 29, 2010.RetrievedJanuary 14,2019.
- ^Sarvari H.; Ghayour, R.; Dastjerdy, E. (2011). "Frequency analysis of graphene nanoribbon FET by Non-Equilibrium Green's Function in mode space".Physica E: Low-dimensional Systems and Nanostructures.43(8): 1509–1513.Bibcode:2011PhyE...43.1509S.doi:10.1016/j.physe.2011.04.018.
- ^Jerzy Ruzyllo (2016).Semiconductor Glossary: A Resource for Semiconductor Community.World Scientific. p. 244.ISBN978-981-4749-56-5.
- ^Appenzeller J, et al. (November 2008)."Toward Nanowire Electronics".IEEE Transactions on Electron Devices.55(11): 2827–2845.Bibcode:2008ITED...55.2827A.doi:10.1109/ted.2008.2008011.ISSN0018-9383.OCLC755663637.S2CID703393.
- ^Prakash, Abhijith; Ilatikhameneh, Hesameddin; Wu, Peng; Appenzeller, Joerg (2017)."Understanding contact gating in Schottky barrier transistors from 2D channels".Scientific Reports.7(1): 12596.arXiv:1707.01459.Bibcode:2017NatSR...712596P.doi:10.1038/s41598-017-12816-3.ISSN2045-2322.OCLC1010581463.PMC5626721.PMID28974712.
- ^Miklos, Bolza."What Are Graphene Field Effect Transistors (GFETs)?".Graphenea.Retrieved14 January2019.
- ^IBM Research Unveils 'VTFET': A Revolutionary New Chip Architecture Which is Two Times the Performance finFETDec 2021
- ^VIII.5. Noise in Transistors
- ^Allen Mottershead (2004).Electronic devices and siraj circuits.New Delhi: Prentice-Hall of India.ISBN978-81-203-0124-5.
- ^Bhalla, Anup (2021-09-17)."Origins of SiC FETs and Their Evolution Toward the Perfect Switch".Power Electronics News.Retrieved2022-01-21.
- ^Slow Body Diode Failures of Field Effect Transistors (FETs): A Case Study.
- ^Sporea, R.A.; Trainor, M.J.; Young, N.D.; Silva, S.R.P. (2014)."Source-gated transistors for order-of-magnitude performance improvements in thin-film digital circuits".Scientific Reports.4:4295.Bibcode:2014NatSR...4E4295S.doi:10.1038/srep04295.PMC3944386.PMID24599023.
External links
edit- PBS The Field Effect Transistor
- How Semiconductors and Transistors Work (MOSFETs)WeCanFigureThisOut.org
- Junction Field Effect Transistor
- CMOS gate circuitry
- Winning the Battle Against Latchup in CMOS Analog Switches
- Field Effect Transistors in Theory and Practice
- The Field Effect Transistor as a Voltage Controlled Resistor
- "The FET (field effect transistor)".rolinychupetin (L.R.Linares). March 30, 2013 – viaYouTube.