Wikipedia

Fermium

Not to be confused withFermion.

Fermiumis asynthetic chemical element;it hassymbolFmandatomic number100. It is anactinideand the heaviest element that can be formed byneutronbombardment of lighter elements, and hence the last element that can be prepared in macroscopic quantities, although pure fermium metal has not yet been prepared.[4]A total of 20 isotopes are known, with257Fm being the longest-lived with a half-life of 100.5 days.

Fermium,100Fm
Fermium
Pronunciation/ˈfɜːrmiəm/​(FUR-mee-əm)
Mass number[257]
Fermium in theperiodic table
Hydrogen Helium
Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon
Sodium Magnesium Aluminium Silicon Phosphorus Sulfur Chlorine Argon
Potassium Calcium Scandium Titanium Vanadium Chromium Manganese Iron Cobalt Nickel Copper Zinc Gallium Germanium Arsenic Selenium Bromine Krypton
Rubidium Strontium Yttrium Zirconium Niobium Molybdenum Technetium Ruthenium Rhodium Palladium Silver Cadmium Indium Tin Antimony Tellurium Iodine Xenon
Caesium Barium Lanthanum Cerium Praseodymium Neodymium Promethium Samarium Europium Gadolinium Terbium Dysprosium Holmium Erbium Thulium Ytterbium Lutetium Hafnium Tantalum Tungsten Rhenium Osmium Iridium Platinum Gold Mercury (element) Thallium Lead Bismuth Polonium Astatine Radon
Francium Radium Actinium Thorium Protactinium Uranium Neptunium Plutonium Americium Curium Berkelium Californium Einsteinium Fermium Mendelevium Nobelium Lawrencium Rutherfordium Dubnium Seaborgium Bohrium Hassium Meitnerium Darmstadtium Roentgenium Copernicium Nihonium Flerovium Moscovium Livermorium Tennessine Oganesson
Er
↑
Fm
↓
—
einsteinium←fermium→mendelevium
Atomic number(Z)100
Groupf-block groups(no number)
Periodperiod 7
Blockf-block
Electron configuration[Rn] 5f127s2
Electrons per shell2, 8, 18, 32, 30, 8, 2
Physical properties
PhaseatSTPsolid(predicted)
Melting point1800K​(1500 °C, ​2800 °F)(predicted)
Density(nearr.t.)9.7(1) g/cm3(predicted)[1][a]
Atomic properties
Oxidation states+2,+3
ElectronegativityPauling scale: 1.3
Ionization energies
  • 1st: 629 kJ/mol
  • [2]
Other properties
Natural occurrencesynthetic
Crystal structure​face-centered cubic(fcc)
Face-centered cubic crystal structure for fermium

(predicted)[1]
CAS Number7440-72-4
History
NamingafterEnrico Fermi
DiscoveryLawrence Berkeley National Laboratory(1953)
Isotopes of fermium
Main isotopes[3] Decay
abun­dance half-life(t1/2) mode pro­duct
252Fm synth 25.39 h SF –
α 248Cf
253Fm synth 3 d ε 253Es
α 249Cf
255Fm synth 20.07 h SF –
α 251Cf
257Fm synth 100.5 d α 253Cf
SF –
Category: Fermium
|references

Fermium was discovered in the debris of thefirsthydrogen bombexplosion in 1952, and named afterEnrico Fermi,one of the pioneers ofnuclear physics.Its chemistry is typical for the late actinides, with a preponderance of the +3oxidation statebut also an accessible +2 oxidation state. Owing to the small amounts of produced fermium and all of its isotopes having relatively short half-lives, there are currently no uses for it outside basic scientific research.

Discovery

edit
Fermium was first observed in the fallout from theIvy Mikenuclear test.
The element was named afterEnrico Fermi.
The element was discovered by a team headed byAlbert Ghiorso.

Fermium was first discovered in the fallout from the 'Ivy Mike' nuclear test (1 November 1952), the first successful test of a hydrogen bomb.[5][6][7]Initial examination of the debris from the explosion had shown the production of a new isotope ofplutonium,244
94Pu
:this could only have formed by the absorption of sixneutronsby auranium-238nucleus followed by twoβ−decays.At the time, the absorption of neutrons by a heavy nucleus was thought to be a rare process, but the identification of244
94Pu
raised the possibility that still more neutrons could have been absorbed by the uranium nuclei, leading to new elements.[7]

Element 99 (einsteinium) was quickly discovered on filter papers which had been flown through the cloud from the explosion (the same sampling technique that had been used to discover244
94Pu
).[7]It was then identified in December 1952 byAlbert Ghiorsoand co-workers at theUniversity of California at Berkeley.[5][6][7]They discovered the isotope253Es (half-life20.5 days) that was made by thecaptureof 15neutronsbyuranium-238nuclei – which then underwent seven successivebeta decays:

(1)

Some238U atoms, however, could capture another amount of neutrons (most likely, 16 or 17).

The discovery of fermium (Z= 100) required more material, as the yield was expected to be at least an order of magnitude lower than that of element 99, and so contaminated coral from theEnewetak atoll(where the test had taken place) was shipped to theUniversity of California Radiation LaboratoryinBerkeley, California,for processing and analysis. About two months after the test, a new component was isolated emitting high-energyα-particles(7.1 MeV) with ahalf-lifeof about a day. With such a short half-life, it could only arise from the β−decay of an isotope of einsteinium, and so had to be an isotope of the new element 100: it was quickly identified as255Fm (t= 20.07(7) hours).[7]

The discovery of the new elements, and the new data on neutron capture, was initially kept secret on the orders of the U.S. military until 1955 due toCold Wartensions.[7][8][9]Nevertheless, the Berkeley team was able to prepare elements 99 and 100 by civilian means, through the neutron bombardment ofplutonium-239,and published this work in 1954 with the disclaimer that it was not the first studies that had been carried out on the elements.[10][11]The "Ivy Mike" studies were declassified and published in 1955.[8]

The Berkeley team had been worried that another group might discover lighter isotopes of element 100 through ion-bombardment techniques before they could publish their classified research,[7]and this proved to be the case. A group at the Nobel Institute for Physics in Stockholm independently discovered the element, producing anisotopelater confirmed to be250Fm (t1/2= 30 minutes) by bombarding a238
92U
target withoxygen-16ions, and published their work in May 1954.[12]Nevertheless, the priority of the Berkeley team was generally recognized, and with it the prerogative to name the new element in honour ofEnrico Fermi,[13]the developer of the first artificial self-sustained nuclear reactor. Fermi was still alive when the name was proposed, but had died by the time it became official.[14]

Isotopes

edit
Main article:Isotopes of fermium
Decay pathway of fermium-257

There are 20 isotopes of fermium listed in NUBASE2016,[15]with atomic weights of 241 to 260,[b]of which257Fm is the longest-lived with ahalf-lifeof 100.5 days.253Fm has a half-life of 3 days, while251Fm of 5.3 h,252Fm of 25.4 h,254Fm of 3.2 h,255Fm of 20.1 h, and256Fm of 2.6 hours. All the remaining ones have half-lives ranging from 30 minutes to less than a millisecond.[16] The neutron capture product of fermium-257,258Fm, undergoesspontaneous fissionwith a half-life of just 370(14) microseconds;259Fm and260Fm also undergo spontaneous fission (t1/2= 1.5(3) s and 4 ms respectively).[16]This means that neutron capture cannot be used to createnuclideswith amass numbergreater than 257, unless carried out in a nuclear explosion. As257Fmalpha decaysto253Cf, and no known fermium isotopes undergobeta minus decayto the next element,mendelevium,fermium is also the last element that can be synthesized by neutron-capture.[4][17][18]Because of this impediment in forming heavier isotopes, these short-lived isotopes258–260Fm constitute the "fermium gap."[19]

Production

edit
Elution:chromatographic separation of Fm(100), Es(99), Cf, Bk, Cm and Am

Fermium is produced by the bombardment of lighteractinideswithneutronsin a nuclear reactor. Fermium-257 is the heaviest isotope that is obtained via neutron capture, and can only be produced in picogram quantities.[c][20]The major source is the 85 MWHigh Flux Isotope Reactor(HFIR) at theOak Ridge National LaboratoryinTennessee,USA, which is dedicated to the production of transcurium (Z> 96) elements.[21]Lower mass fermium isotopes are available in greater quantities, though these isotopes (254Fm and255Fm) are comparatively short-lived. In a "typical processing campaign" at Oak Ridge, tens of grams ofcuriumare irradiated to produce decigram quantities ofcalifornium,milligram quantities ofberkeliumandeinsteinium,and picogram quantities of fermium.[22]However, nanogram[23]quantities of fermium can be prepared for specific experiments. The quantities of fermium produced in 20–200 kiloton thermonuclear explosions is believed to be of the order of milligrams, although it is mixed in with a huge quantity of debris; 4.0 picograms of257Fm was recovered from 10 kilograms of debris from the "Hutch"test (16 July 1969).[24]The Hutch experiment produced an estimated total of 250 micrograms of257Fm.

After production, the fermium must be separated from other actinides and fromlanthanidefission products. This is usually achieved byion-exchange chromatography,with the standard process using a cation exchanger such as Dowex 50 or TEVAeluted with a solution of ammonium α-hydroxyisobutyrate.[4][25]Smaller cations form more stable complexes with the α-hydroxyisobutyrate anion, and so are preferentially eluted from the column.[4]A rapidfractional crystallizationmethod has also been described.[4][26]

Although the most stable isotope of fermium is257Fm, with ahalf-lifeof 100.5 days, most studies are conducted on255Fm (t1/2= 20.07(7) hours), since this isotope can be easily isolated as required as the decay product of255Es (t1/2= 39.8(12) days).[4]

Synthesis in nuclear explosions

edit

The analysis of the debris at the 10-megatonIvy Mikenuclear test was a part of long-term project, one of the goals of which was studying the efficiency of production of transuranium elements in high-power nuclear explosions. The motivation for these experiments was as follows: synthesis of such elements from uranium requires multiple neutron capture. The probability of such events increases with the neutron flux, and nuclear explosions are the most powerful neutron sources, providing densities on the order 1023neutrons/cm2within a microsecond, i.e. about 1029neutrons/(cm2·s). For comparison, the flux of the HFIR reactor is 5×1015neutrons/(cm2·s). A dedicated laboratory was set up right atEnewetak Atollfor preliminary analysis of debris, as some isotopes could have decayed by the time the debris samples reached the U.S. The laboratory was receiving samples for analysis, as soon as possible, from airplanes equipped with paper filters which flew over the atoll after the tests. Whereas it was hoped to discover new chemical elements heavier than fermium, those were not found after a series of megaton explosions conducted between 1954 and 1956 at the atoll.[27]

Estimated yield of transuranium elements in the U.S. nuclear tests Hutch and Cyclamen.[28]

The atmospheric results were supplemented by the underground test data accumulated in the 1960s at theNevada Test Site,as it was hoped that powerful explosions conducted in confined space might result in improved yields and heavier isotopes. Apart from traditional uranium charges, combinations of uranium with americium and thorium have been tried, as well as a mixed plutonium-neptunium charge. They were less successful in terms of yield, which was attributed to stronger losses of heavy isotopes due to enhanced fission rates in heavy-element charges. Isolation of the products was found to be rather problematic, as the explosions were spreading debris through melting and vaporizing rocks under the great depth of 300–600 meters, and drilling to such depth in order to extract the products was both slow and inefficient in terms of collected volumes.[27][28]

Among the nine underground tests, which were carried between 1962 and 1969 and codenamed Anacostia (5.2kilotons,1962), Kennebec (<5 kilotons, 1963), Par (38 kilotons, 1964), Barbel (<20 kilotons, 1964), Tweed (<20 kilotons, 1965), Cyclamen (13 kilotons, 1966), Kankakee (20-200 kilotons, 1966), Vulcan (25 kilotons, 1966) and Hutch (20-200 kilotons, 1969),[29]the last one was most powerful and had the highest yield of transuranium elements. In the dependence on the atomic mass number, the yield showed a saw-tooth behavior with the lower values for odd isotopes, due to their higher fission rates.[28]The major practical problem of the entire proposal, however, was collecting the radioactive debris dispersed by the powerful blast. Aircraft filters adsorbed only about 4×10−14of the total amount and collection of tons of corals at Enewetak Atoll increased this fraction by only two orders of magnitude. Extraction of about 500 kilograms of underground rocks 60 days after the Hutch explosion recovered only about 10−7of the total charge. The amount of transuranium elements in this 500-kg batch was only 30 times higher than in a 0.4 kg rock picked up 7 days after the test. This observation demonstrated the highly nonlinear dependence of the transuranium elements yield on the amount of retrieved radioactive rock.[30]In order to accelerate sample collection after the explosion, shafts were drilled at the site not after but before the test, so that the explosion would expel radioactive material from the epicenter, through the shafts, to collecting volumes near the surface. This method was tried in the Anacostia and Kennebec tests and instantly provided hundreds of kilograms of material, but with actinide concentrations 3 times lower than in samples obtained after drilling; whereas such a method could have been efficient in scientific studies of short-lived isotopes, it could not improve the overall collection efficiency of the produced actinides.[31]

Though no new elements (apart from einsteinium and fermium) could be detected in the nuclear test debris, and the total yields of transuranium elements were disappointingly low, these tests did provide significantly higher amounts of rare heavy isotopes than previously available in laboratories. For example, 6×109atoms of257Fm could be recovered after the Hutch detonation. They were then used in the studies of thermal-neutron induced fission of257Fm and in discovery of a new fermium isotope258Fm. Also, the rare isotope250Cm was synthesized in large quantities, which is very difficult to produce in nuclear reactors from its progenitor249Cm; the half-life of249Cm (64 minutes) is much too short for months-long reactor irradiations, but is very "long" on the explosion timescale.[32]

Natural occurrence

edit

Because of the short half-life of all known isotopes of fermium, anyprimordialfermium, that is fermium present on Earth during its formation, has decayed by now. Synthesis of fermium from naturally occurring uranium and thorium in the Earth's crust requires multiple neutron captures, which is extremely unlikely. Therefore, most fermium is produced on Earth in laboratories, high-power nuclear reactors, or innuclear tests,and is present for only a few months afterward. Thetransuranic elementsamericiumto fermium did occur naturally in thenatural nuclear fission reactoratOklo,but no longer do so.[33]

Chemistry

edit
A fermium-ytterbiumalloy used for measuring theenthalpy of vaporizationof fermium metal

The chemistry of fermium has only been studied in solution using tracer techniques, and no solid compounds have been prepared. Under normal conditions, fermium exists in solution as the Fm3+ion, which has ahydration numberof 16.9 and anacid dissociation constantof 1.6×10−4(pKa= 3.8).[34][35]Fm3+forms complexes with a wide variety of organic ligands withharddonor atoms such as oxygen, and these complexes are usually more stable than those of the preceding actinides.[4]It also forms anionic complexes with ligands such aschlorideornitrateand, again, these complexes appear to be more stable than those formed byeinsteiniumorcalifornium.[36]It is believed that the bonding in the complexes of the later actinides is mostlyionicin character: the Fm3+ion is expected to be smaller than the preceding An3+ions because of the highereffective nuclear chargeof fermium, and hence fermium would be expected to form shorter and stronger metal–ligand bonds.[4]

Fermium(III) can be fairly easily reduced to fermium(II),[37]for example withsamarium(II) chloride,with which fermium(II) coprecipitates.[38][39]In the precipitate, the compound fermium(II) chloride (FmCl2) was produced, though it was not purified or studied in isolation.[40]Theelectrode potentialhas been estimated to be similar to that of theytterbium(III)/(II) couple, or about −1.15 V with respect to thestandard hydrogen electrode,[41]a value which agrees with theoretical calculations.[42]The Fm2+/Fm0couple has an electrode potential of −2.37(10) V based onpolarographicmeasurements.[43]

Toxicity

edit

Though few people come in contact with fermium, theInternational Commission on Radiological Protectionhas set annual exposure limits for the two most stable isotopes. For fermium-253, the ingestion limit was set at 107becquerels(1 Bq equals one decay per second), and the inhalation limit at 105Bq; for fermium-257, at 105Bq and 4,000 Bq respectively.[44]

Notes and references

edit

Notes

edit
  1. ^The density is calculated from the predicted metallic radius (Silva 2006, p. 1628) and the predicted close-packed crystal structure (Fournier 1976).
  2. ^The discovery of260Fm is considered "unproven" in NUBASE2003.[16]
  3. ^All isotopes of elements Z > 100 can only be produced by accelerator-based nuclear reactions with charged particles and can be obtained only in tracer quantities (e.g., 1 million atoms for Md (Z= 101) per hour of irradiation (see Silva 2006).

References

edit
  1. ^abFournier, Jean-Marc (1976). "Bonding and the electronic structure of the actinide metals".Journal of Physics and Chemistry of Solids.37(2): 235–244.Bibcode:1976JPCS...37..235F.doi:10.1016/0022-3697(76)90167-0.
  2. ^Sato, Tetsuya K.; Asai, Masato; Borschevsky, Anastasia; Beerwerth, Randolf; Kaneya, Yusuke; Makii, Hiroyuki; Mitsukai, Akina; Nagame, Yuichiro; Osa, Akihiko; Toyoshima, Atsushi; Tsukada, Kazuki; Sakama, Minoru; Takeda, Shinsaku; Ooe, Kazuhiro; Sato, Daisuke; Shigekawa, Yudai; Ichikawa, Shin-ichi; Düllmann, Christoph E.; Grund, Jessica; Renisch, Dennis; Kratz, Jens V.; Schädel, Matthias; Eliav, Ephraim; Kaldor, Uzi; Fritzsche, Stephan; Stora, Thierry (25 October 2018). "First Ionization Potentials of Fm, Md, No, and Lr: Verification of Filling-Up of 5f Electrons and Confirmation of the Actinide Series".Journal of the American Chemical Society.140(44): 14609–14613.doi:10.1021/jacs.8b09068.
  3. ^Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021)."The NUBASE2020 evaluation of nuclear properties"(PDF).Chinese Physics C.45(3): 030001.doi:10.1088/1674-1137/abddae.
  4. ^abcdefghSilva, Robert J. (2006)."Fermium, Mendelevium, Nobelium, and Lawrencium"(PDF).In Morss, Lester R.; Edelstein, Norman M.; Fuger, Jean (eds.).The Chemistry of the Actinide and Transactinide Elements.Vol. 3 (3rd ed.). Dordrecht: Springer. pp. 1621–1651.doi:10.1007/1-4020-3598-5_13.ISBN978-1-4020-3555-5.Archived fromthe original(PDF)on 17 July 2010.
  5. ^ab"Einsteinium".Archived fromthe originalon 26 October 2007.Retrieved7 December2007.
  6. ^abFermium – National Research Council CanadaArchived2010-12-25 at theWayback Machine.Retrieved 2 December 2007
  7. ^abcdefgGhiorso, Albert(2003)."Einsteinium and Fermium".Chemical and Engineering News.81(36): 174–175.doi:10.1021/cen-v081n036.p174.
  8. ^abGhiorso, A.; Thompson, S.; Higgins, G.; Seaborg, Glenn T.; Studier, M.; Fields, P.; Fried, S.; Diamond, H.; et al. (1955)."New Elements Einsteinium and Fermium, Atomic Numbers 99 and 100"(PDF).Phys. Rev.99(3): 1048–1049.Bibcode:1955PhRv...99.1048G.doi:10.1103/PhysRev.99.1048.
  9. ^Fields, P. R.; Studier, M. H.; Diamond, H.; Mech, J. F.; Inghram, M. G. Pyle, G. L.; Stevens, C. M.; Fried, S.; Manning, W. M. (Argonne National Laboratory, Lemont, Illinois); Ghiorso, A.; Thompson, S. G.; Higgins, G. H.; Seaborg, G. T. (University of California, Berkeley, California): "Transplutonium Elements in Thermonuclear Test Debris", in:Fields, P.; Studier, M.; Diamond, H.; Mech, J.; Inghram, M.; Pyle, G.; Stevens, C.; Fried, S.; Manning, W.; Ghiorso, A.; Thompson, S.; Higgins, G.; Seaborg, G. (1956). "Transplutonium Elements in Thermonuclear Test Debris".Physical Review.102(1): 180.Bibcode:1956PhRv..102..180F.doi:10.1103/PhysRev.102.180.
  10. ^Thompson, S. G.;Ghiorso, A.;Harvey, B. G.; Choppin, G. R. (1954)."Transcurium Isotopes Produced in the Neutron Irradiation of Plutonium"(PDF).Physical Review.93(4): 908.Bibcode:1954PhRv...93..908T.doi:10.1103/PhysRev.93.908.
  11. ^Choppin, G. R.; Thompson, S. G.;Ghiorso, A.;Harvey, B. G. (1954)."Nuclear Properties of Some Isotopes of Californium, Elements 99 and 100".Physical Review.94(4): 1080–1081.Bibcode:1954PhRv...94.1080C.doi:10.1103/PhysRev.94.1080.
  12. ^Atterling, Hugo; Forsling, Wilhelm; Holm, Lennart W.; Melander, Lars; Åström, Björn (1954). "Element 100 Produced by Means of Cyclotron-Accelerated Oxygen Ions".Physical Review.95(2): 585–586.Bibcode:1954PhRv...95..585A.doi:10.1103/PhysRev.95.585.2.
  13. ^"Fermium (Fm) | AMERICAN ELEMENTS ®".American Elements: The Materials Science Company.Retrieved9 August2024.
  14. ^Hoffman, D. C.;Ghiorso, A.;Seaborg, G. T. (2000).The Transuranium People: The Inside Story.World Scientific.pp. 187–189.ISBN978-1-78-326244-1.
  15. ^Audi, G.; Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S. (2017)."The NUBASE2016 evaluation of nuclear properties"(PDF).Chinese Physics C.41(3): 030001.Bibcode:2017ChPhC..41c0001A.doi:10.1088/1674-1137/41/3/030001.
  16. ^abcAudi, Georges; Bersillon, Olivier; Blachot, Jean;Wapstra, Aaldert Hendrik(2003),"The NUBASEevaluation of nuclear and decay properties ",Nuclear Physics A,729:3–128,Bibcode:2003NuPhA.729....3A,doi:10.1016/j.nuclphysa.2003.11.001
  17. ^Greenwood, Norman N.;Earnshaw, Alan (1984).Chemistry of the Elements.Oxford:Pergamon Press.p. 1262.ISBN978-0-08-022057-4.
  18. ^Sonzogni, Alejandro."Interactive Chart of Nuclides".National Nuclear Data Center: Brookhaven National Laboratory. Archived fromthe originalon 21 June 2018.Retrieved6 June2008.
  19. ^Zagrebaev, Valeriy; Karpov, Alexander; Greiner, Walter (2013)."Future of superheavy element research: Which nuclei could be synthesized within the next few years?"(PDF).Journal of Physics.420(12001): 11.arXiv:1207.5700.Bibcode:2013JPhCS.420a2001Z.doi:10.1088/1742-6596/420/1/012001.S2CID55434734.
  20. ^Luig, Heribert; Keller, Cornelius; Wolf, Walter; Shani, Jashovam; Miska, Horst; Zyball, Alfred; Gervé, Andreas; Balaban, Alexandru T.; Kellerer, Albrecht M.; Griebel, Jürgen (2000). "Radionuclides".Ullmann's Encyclopedia of Industrial Chemistry.doi:10.1002/14356007.a22_499.ISBN978-3527306732.
  21. ^"High Flux Isotope Reactor".Oak Ridge National Laboratory.Retrieved23 September2010.
  22. ^Porter, C. E.; Riley, F. D. Jr.; Vandergrift, R. D.; Felker, L. K. (1997)."Fermium Purification Using Teva Resin Extraction Chromatography".Sep. Sci. Technol.32(1–4): 83–92.doi:10.1080/01496399708003188.
  23. ^Sewtz, M.; Backe, H.; Dretzke, A.; Kube, G.; Lauth, W.; Schwamb, P.; Eberhardt, K.; Grüning, C.; Thörle, P.; Trautmann, N.; Kunz, P.; Lassen, J.; Passler, G.; Dong, C.; Fritzsche, S.; Haire, R. (2003). "First Observation of Atomic Levels for the Element Fermium (Z=100) ".Phys. Rev. Lett.90(16): 163002.Bibcode:2003PhRvL..90p3002S.doi:10.1103/PhysRevLett.90.163002.PMID12731975.S2CID16234935.
  24. ^Hoff, R. W.; Hulet, E. K. (1970). "Engineering with Nuclear Explosives".2:1283–1294.{{cite journal}}:Cite journal requires|journal=(help)
  25. ^Choppin, G. R.; Harvey, B. G.; Thompson, S. G. (1956)."A new eluant for the separation of the actinide elements"(PDF).J. Inorg. Nucl. Chem.2(1): 66–68.doi:10.1016/0022-1902(56)80105-X.
  26. ^Mikheev, N. B.; Kamenskaya, A. N.; Konovalova, N. A.; Rumer, I. A.; Kulyukhin, S. A. (1983). "High-speed method for the separation of fermium from actinides and lanthanides".Radiokhimiya.25(2): 158–161.
  27. ^abSeaborg, p. 39
  28. ^abcSeaborg, p. 40
  29. ^United States Nuclear Tests July 1945 through September 1992ArchivedJune 15, 2010, at theWayback Machine,DOE/NV--209-REV 15, December 2000
  30. ^Seaborg, p. 43
  31. ^Seaborg, p. 44
  32. ^Seaborg, p. 47
  33. ^Emsley, John (2011).Nature's Building Blocks: An A-Z Guide to the Elements(New ed.). New York, NY: Oxford University Press.ISBN978-0-19-960563-7.
  34. ^Lundqvist, Robert; Hulet, E. K.; Baisden, T. A.; Näsäkkälä, Elina; Wahlberg, Olof (1981)."Electromigration Method in Tracer Studies of Complex Chemistry. II. Hydrated Radii and Hydration Numbers of Trivalent Actinides".Acta Chemica Scandinavica A.35:653–661.doi:10.3891/acta.chem.scand.35a-0653.
  35. ^Hussonnois, H.; Hubert, S.; Aubin, L.;Guillaumont, R.;Boussieres, G. (1972).Radiochem. Radioanal. Lett.10:231–238.{{cite journal}}:Missing or empty|title=(help)
  36. ^Thompson, S. G.; Harvey, B. G.; Choppin, G. R.;Seaborg, G. T.(1954)."Chemical Properties of Elements 99 and 100".J. Am. Chem. Soc.76(24): 6229–6236.doi:10.1021/ja01653a004.
  37. ^Malý, Jaromír (1967). "The amalgamation behaviour of heavy elements 1. Observation of anomalous preference in formation of amalgams of californium, einsteinium, and fermium".Inorg. Nucl. Chem. Lett.3(9): 373–381.doi:10.1016/0020-1650(67)80046-1.
  38. ^Mikheev, N. B.; Spitsyn, V. I.; Kamenskaya, A. N.; Gvozdec, B. A.; Druin, V. A.; Rumer, I. A.; Dyachkova, R. A.; Rozenkevitch, N. A.; Auerman, L. N. (1972). "Reduction of fermium to divalent state in chloride aqueous ethanolic solutions".Inorg. Nucl. Chem. Lett.8(11): 929–936.doi:10.1016/0020-1650(72)80202-2.
  39. ^Hulet, E. K.; Lougheed, R. W.; Baisden, P. A.; Landrum, J. H.; Wild, J. F.; Lundqvist, R. F. (1979). "Non-observance of monovalent Md".J. Inorg. Nucl. Chem.41(12): 1743–1747.doi:10.1016/0022-1902(79)80116-5.
  40. ^Dictionary of Inorganic Compounds.Vol. 3 (1 ed.). Chapman & Hall. 1992. p. 2873.ISBN0412301202.
  41. ^Mikheev, N. B.; Spitsyn, V. I.; Kamenskaya, A. N.; Konovalova, N. A.; Rumer, I. A.; Auerman, L. N.; Podorozhnyi, A. M. (1977). "Determination of oxidation potential of the pair Fm2+/Fm3+".Inorg. Nucl. Chem. Lett.13(12): 651–656.doi:10.1016/0020-1650(77)80074-3.
  42. ^Nugent, L. J. (1975).MTP Int. Rev. Sci.: Inorg. Chem.7:195–219.{{cite journal}}:Missing or empty|title=(help)
  43. ^Samhoun, K.; David, F.; Hahn, R. L.; O'Kelley, G. D.; Tarrant, J. R.; Hobart, D. E. (1979). "Electrochemical study of mendelevium in aqueous solution: No evidence for monovalent ions".J. Inorg. Nucl. Chem.41(12): 1749–1754.doi:10.1016/0022-1902(79)80117-7.
  44. ^Koch, Lothar (2000). "Transuranium Elements".Transuranium Elements, in Ullmann's Encyclopedia of Industrial Chemistry.Wiley.doi:10.1002/14356007.a27_167.ISBN978-3527306732.

Further reading

edit
edit
Wikimedia Commons has media related toFermium.
Look upfermiumin Wiktionary, the free dictionary.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Fermium&oldid=1242679641"