Wikipedia

Game Boy Printer

TheGame Boy Printer,known as thePocket Printer[a]in Japan, is athermal printeraccessory released byNintendoin 1998 which ceased production in early 2003. The Game Boy Printer is compatible with all the Game Boy systems except theGame Boy Microand is designed to be used in conjunction with theGame Boy Camera.It also prints images from compatible late-generation Game Boy and Game Boy Color games (listed below). It runs on sixAA batteriesand uses a proprietary 38mm widethermal paperwith adhesive backing, originally sold in white, red, yellow and blue colors. In Japan, a bright yellowPokémonversion of the Game Boy Printer was released, featuring a feed button in the style of a Poké Ball.

The Game Boy Printer
The Japanese version, known as the Pocket Printer
Internal components of the Game Boy Printer

Games with Game Boy Printer support

edit

Game Boy Printer Thermal Paper

edit
Roll dimensions
Roll width Roll diameter Central spindle core diameter Unrolled length
38 mm (1.5 in) 29.5–30 mm (1.16–1.18 in) 12 mm (0.47 in) 390–400 cm (12 ft 10 in – 13 ft 1 in)

Released alongside the Game Boy Printer in 1998, Nintendo-manufactured thermal paper refill rolls were produced in white, cream, blue, yellow, and red variants, all of which had an integrated adhesive backing.

After powering the printer on, a clip at the rear of the protruding translucent grey refill housing is depressed, allowing this to be lifted away. The thermal paper roll inserted upside-down and unravelled end facing down, with this end being fed into a thin slot. The maroon 'FEED' button is then pressed down, which engages the uptake motor, and pulls the paper through to the exit slot which has an integrated serrated edge, which allows finished prints to be ripped away from the roll. Forcibly pulling the paper opposite to the feed direction causes permanent damage to the gearing within the feed mechanism.

When a picture was printed from the Game Boy Camera, it would print with a 5 mm (0.20 in) margin above and below the picture and print the picture at a 23 mm (0.91 in) height. This would give the total of 33 mm (1.3 in) height per picture. Although on-box advertisements boasted up to 180 pictures per roll, in actuality a typical roll could only print between 118 and 121 pictures.

Sold on the official Nintendo e-Shop (as triple packs of blue, cream and white rolls) until 2007, Game Boy branded official replacement thermal paper is now difficult to source. Even brand-new, sealed, un-opened official rolls degrade relatively quickly once opened (if they were stored correctly and their seal has not failed). Most, however, have suffered degradation whilst in storage due to a chemical reaction between the thermal paper and adhesive backing layer.[5]Due to the proprietary nature of the adhesive-backing, replacement thermal paper that is able to be adhered to surfaces once printed upon (including brands such as 'MAXStick') is prohibitively expensive.

Instead, the thermal paper rolls can be successfully substituted with a38mm x 4malternative, with or without ('core-less') spindle cores, without repercussions on the printer. Such rolls are also compatible with some hand-held printing calculators, such as the Canon TP-8, Texas Instruments 5000–2008, Sharp 8180, and Casio FX-802. Alternatively, wider rolls (such as57mm x 30mm x 12.7mm) can be cut or trimmed to 38mm, and function without issue.

Please note, however, that due to the inherent limitations of thermal paper, photographs printed on thermal paper will fade over time (this depends heavily on the thermal paper variant used, and could be as short as a few months, or instead a few years) until the paper is virtually blank. Paper in this state can usually be re-used, as long as the length of the strip is long enough to be manually fed into the takeup.

It is unknown whether original Game Boy Printer paper contains the chemicalsBisphenol-A(BPA) or its analogBisphenol-S(BPS). Previously very widely used in plastics and thermal receipt paper due to their heat resistance and stability, these are currently being phased out of thermal paper coatings due to their in-vivo accrual (via direct dermal absorption) and resultant oestrogen-mimicking and endocrine disruption.[6]Modern thermal paper roll replacements, or their manufacturers, usually clearly state if they are Bisphenol free [BP-Free].

Game Boy Printer Protocol

edit

The communication between the Game Boy and the Game Boy Printer is via a simple serial link. Serial clock (provided by the Game Boy for the printer), serial data output (from Game Boy to printer) as well as serial data input (to Game Boy from printer). The Game Boy sends a packet to the printer, to which the printer responds with an acknowledgement as well as a status code.[7][8][9]

Packet Format

edit

Communication is via the Game Boy sending to the printer a simple packet structure as shown below. In general, between the first "sync_word" til the checksum is the Game Boy communicating to the printer. The last two bytes of the packet are for the printer to acknowledge and show its current status code.


Byte Position 0 1 2 3 4 5 6+X 6+X+1 6+X+2 6+X+3 6+X+4
Size 2 bytes 2 bytes 1 byte 1 byte 1 byte 1 byte Variable 2 bytes 2 bytes 1 byte 1 byte
Description SYNC_WORD SYNC_WORD COMMAND COMPRESSION DATA_LENGTH(X) DATA_LENGTH(X) Payload CHECKSUM CHECKSUM ACK STATUS
GB TO PRINTER 0x88 0x33 See Below See Below Low Byte High Byte See Below See Below See Below 0x00 0x00
PRINTER TO GB 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x81 See Below
  • Command may be either Initialize (0x01), Data (0x04), Print (0x02), or Inquiry (0x0F).
  • Payload byte count size depends on the value of the `DATA_LENGTH` field.
  • Compression field is a compression indicator. No compression = 0x00
  • Checksum is a simple sum of bytes in command, data length, and the data payload.
  • Status byte is a bit-field byte indicating various status of the printer itself. (e.g. If it is still printing)

Commands

edit

Initialize (0x01)

edit
  • Typical Payload Size = 0

This packet is sent without a data payload. It signals to the printer to clear the settings and prepare for the first data payload.

Data (0x04)

edit
  • Typical Payload Size = 640

The data packet is for transferring the image data to the printer data buffer. The typical size of the data payload is 640 bytes since it can store two printable rows of 20 standard Game Boy tile (2 bit color in 8x8 pixels grid), of which the Game Boy tile takes 16 bytes.[10]

edit
  • Typical Payload Size = 4

This commands the printer to start printing. It also has 4 settings bytes for printing.[9]

Payload Byte Type Typical Value note
0 Unknown 0x1
1 Printing Margins ? High Nibble for top margin. Low Nibble for bottom margin
2 Palette 0xE4
3 Print head strength ? 7 bit value

Inquiry (0x0F)

edit
  • Typical Payload Size = 0

Used for checking the printer status byte. This may be for checking if there is enough data in the printer buffer to start printing smoothly or if the printer is currently printing.

Printer Status Reply Byte

edit
Bit X Status Byte Bit Position Meaning
Bit 7 Battery Too Low
Bit 6 Other Error
Bit 5 Paper Jam
Bit 4 Packet Error
Bit 3 Unprocessed Data
Bit 2 Image Data Full
Bit 1 Printer Busy
Bit 0 Checksum Error

Usage today

edit

Mad Catz[11]and Xchanger sold a kit that enabled users to connect a Game Boy to aPCand print images using the PC's printer. Hobbyists outside the UK can also make their own cable for uploading images to their computer.[12]A Game Boy Printeremulatoris needed for the Game Boy to interface with the PC once linked via cable.[13]The Game Boy Printer Paper has also been discontinued, and rolls of the genuine article that still produce a reliable image are becoming more difficult to find.[14]Regular thermal paper, such as the kind used forPOS terminals,can be cut to the proper width and used successfully with the Game Boy Printer.[15]

The system will print a test message reading "Hello" if it is turned on while the feed button is held. According to the manual, this is used to test if the printer is functioning properly. To get around using six AA batteries (1.5 volts each) for the printer, a single9V batterycan be used if wired properly, because the printer requires 9V DC.[citation needed]

Notes

edit
  1. ^Japanese:ポケットプリンタ,Hepburn:Poketto Purinta

Further Information

edit

Reverse Engineering

edit

'Ben Heck Reverse Engineers Game Boy Printer':https://www.youtube.com/watch?v=43FfJvd-YP4

References

edit
  1. ^"Logical for Game Boy Color - GameFAQs".gamefaqs.gamespot.com.Archivedfrom the original on 2021-07-24.Retrieved2021-07-24.
  2. ^"Puzzled for Game Boy Color Tech Info".MobyGames.2002.Archivedfrom the original on August 9, 2021.RetrievedAugust 8,2021.Miscellaneous Attributes: Game Boy Printer Support
  3. ^Davis, Cameron (January 28, 2000)."Super Mario DX Review".GameSpot.RetrievedJuly 4,2023.
  4. ^Card Hero - Game Boy Color Preview at IGN (March, 2000)Archived2012-03-21 at theWayback Machine
  5. ^Flickr (10 June 2006),game boy printer problems,archivedfrom the original on 2017-01-20,retrieved2020-09-17
  6. ^Bienkowski, Brian (2013-01-17)."BPA Replacement Also Alters Hormones".Scientific American.Archivedfrom the original on 2021-06-18.Retrieved2020-09-17.
  7. ^"Gameboy Printer".GbdevWiki.Archivedfrom the original on 2021-06-03.Retrieved2017-04-09.
  8. ^"GB Printer interface specification".December 1, 2001.Archivedfrom the original on June 15, 2009.
  9. ^ab"In Depth: The Game Boy Printer".Shonumi.September 7, 2016.Archivedfrom the original on June 3, 2021.RetrievedApril 11,2017.
  10. ^Huderle, Marcus (June 29, 2013)."Gameboy 2BPP Graphics Format".Archivedfrom the original on June 25, 2018.RetrievedApril 11,2017.
  11. ^"Mad Catz GB to PC Camera Link Cable (GBC)Archived2019-12-12 at theWayback Machine".November 20th, 2010.
  12. ^Frohwein, Jeff (April 5, 1998)."Game Boy to LPT Cable diagram".Archived fromthe originalon February 23, 2010.RetrievedJuly 17,2009.
  13. ^Eyre, Martin (September 18, 1998)."Gameboy Printer Emulator".Archived fromthe originalon October 11, 2011.RetrievedJuly 17,2009.
  14. ^"game boy printer problems".Flickr.June 10, 2006.Archivedfrom the original on January 20, 2017.RetrievedJuly 17,2009.
  15. ^Make your own Game Boy Printer Paper video tutorial.Archived fromthe originalon January 10, 2015.RetrievedJuly 17,2009– via YouTube.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Game_Boy_Printer&oldid=1221310173"