Wikipedia

Rolls-Royce Nene

TheRolls-Royce RB.41 Neneis a 1940s Britishcentrifugal compressorturbojetengine. The Nene was a complete redesign, rather than a scaled-upRolls-Royce Derwent,[1]with a design target of 5,000lbf(22 kN), making it the most powerful engine of its era. First run in 1944, it wasRolls-Royce's thirdjet engineto enter production, and first ran less than 6 months from the start of design. It was named after theRiver Nenein keeping with the company's tradition of naming its jet engines after rivers.

RB.41 Nene / J42
Rolls-Royce Nene on display atRAAF Base Pearce,Western Australia- note the wire mesh grille around the air intake to preventForeign object damage
Type Turbojet
Manufacturer Rolls-Royce Limited
First run 27 October 1944
Major applications Canadair CT-133 Silver Star
Dassault Ouragan
de Havilland Vampire
Grumman F9F Panther
Hawker Sea Hawk
Number built 1,139 (J42)
Developed from Rolls-Royce Derwent
Developed into

The design saw relatively little use in British aircraft designs, being passed over in favour of theaxial-flowAvonthat followed it. Its only widespread use in the UK was in theHawker Sea Hawkand theSupermarine Attacker.In the US it was built under licence as thePratt & Whitney J42,and it powered theGrumman F9F Panther.Its most widespread use was in the form of theKlimov VK-1,areverse-engineered,modified and enlarged version which produced around 6,000 lbf (27 kN) of thrust, and powered the Russian builtMikoyan-Gurevich MiG-15,a highly successful fighter aircraft which was produced in vast numbers.

An uprated version of the Nene was produced as theRolls-Royce Tay.

Design and development

edit
AnFMA IAe 33 Pulqui IIwithout tail section, showing its Rolls-Royce Nene II turbojet

The Nene was designed as a result of a June 1944 visit to the US byStanley Hooker.He discovered thatGeneral Electricalready had two engine types running, an axial and a centrifugal, of 4,000 lbf (18 kN) thrust. He was determined to produce a higher thrust engine and subsequently obtained a Ministry of Aircraft Production contract for an engine of 4,200 lbf (19 kN) thrust with the understanding that 5,000 lbf (22 kN) would be the design target. Hooker,Adrian Lombard,Pearson and Morley designed a new engine, the B.41 later called the Nene, rather than scaling up the Derwent.[1]

The double-sidedimpellerwas 28.8 inches (73 cm) in diameter, compared to 20.68 in (52.5 cm) for the Derwent I, to produce an airflow of 80 lb/s (36 kg/s), while the overall diameter of the engine was 49.5 inches (126 cm). A scaled up Derwent of the same thrust would have had a 60-inch (150 cm) diameter. The compressor casing was based on Whittle's Type 16 W.2/500 compressor case which was more aerodynamically efficient than that on the Derwent but also eliminated cracking. Other design advances included nine new low pressure-drop/high efficiencycombustion chambersdeveloped byLucasand a small impeller for rear bearing and turbine disc cooling.[2]The first engine start was attempted on 27 October 1944. A number of snags delayed the run until nearly midnight, when with almost the entire day and night shift staff watching, an attempt was made to start the engine. To the frustration of everyone with a vested interest in it starting the engine refused to light - positioning the igniter was a trial-and-error affair at the time. On a subsequent attempt, Denis Drew, who had come from Lucas, the combustion specialists, and took a wide interest in engine development problems, removed one of the igniters and instead used the flame from anoxy-acetylene torchto ignite the fuel in the combustion chamber.

The igniter had to be close enough to the fuel spray to ignite it when starting, but not overheat when subjected to the continuous flame temperature when the engine was running. The larger diameter of the Nene combustion chambers found this to be a problem, and the first-run needed to ignite with a flame rather than the spark energy that was considered sufficient at that time. The Nene was subsequently fitted with two torch, or flame, igniters which had a fuel spray next to an igniter.[3]The flame would project into the main combustor fuel spray. Torch igniters were superseded by surface discharge igniter plugs with a considerably greater energy release rate than a flame.[4]

The engine was run up to just over 4,000 lbf (18 kN), and a cheer went up around the assembled personnel. However the engine was running hotter than expected and would not reach 5,000 lb, as it was built, without overheating the turbine. Pearson, the performance engineer, insisted that no more running be done without fitting the guide vanes that were available for the impeller intake. Upon Hooker's arrival next morning, and informed that the inlet vanes had been fitted during the night, Hooker was overjoyed to see the thrust gauge needle registering 5,000 lbf (22 kN) at the same temperature that had only given 4,000 lb the previous night, making the B.41 the highest thrust jet engine in the world. Weight was around 1,600 lb (730 kg).[5]

Inlet guide vanes had been in use in Whittle engines for some time. They improve the overall performance of the engine significantly by "helping the air round the corner".[6]However they were made from thin sheet metal and often broke damaging the engine. For Hooker they were a worrying mechanical problem which he did not want so they were not fitted when the Derwent entered service, although the turbine had to run 90 degC hotter to give the take-off thrust of 2,000 lb. He was still concerned with the durability of the vanes so the first Nene was initially built without them.[7]

The Nene was based on the "straight-through" version of the basicWhittle-style layout, with the flow going directly through the engine from front to rear, as opposed to a "reverse-flow" type,[8]which reverses the direction of air flow through the combustor section so that the turbine stage can be mounted within the combustor section; this allows for a more compact engine, but increases the combustor pressure losses which has an adverse effect on engine performance.[9]Less thrust is generated with the same fuel flow. It was during the design of the Nene that Rolls decided to give their engines numbers as well as names, with theWellandandDerwentkeeping their originalRovermodels,B/23andB/26.It was later decided that these model designations looked too much like RAF bomber designations (i.e. "English Electric Canberra B.Mk 2"would often be shortened to"Canberra B.2"), and" R "was added to the front, the" R "signifying" Rolls "and the original Rover" B "signifyingBarnoldswick.[10]ThisRBdesignation scheme continued into the late 20th Century, withturbofandesigns such as theRB.199,RB.203andRB.211;the most recent family of Rolls-Royce turbofans (a development of the RB.211) goes under the simple designation "Rolls-Royce Trent",with variants given their own designator number or letter series (i.e.Trent 500,Trent 900,Trent 1000,Trent XWB,etc.).

The Rolls-Royce Avro Lancastrian Nene test bed in 1948 fitted with the jet engines in the outboard position

Early airborne tests of the Nene were undertaken in anAvro Lancastrianoperated by Rolls-Royce from their Hucknall airfield. The two outboardRolls-Royce Merlinswere replaced by the jet engine. The Nene's first flight however was in a modifiedLockheed XP-80 Shooting Star.[11]

After seeing the Nene running, at an after work drink at theSwan & Royal Hotel,Clitheroe,and hearing the complaints about a lack of any official application for the engine, someone - thought to beWhittle- suggested that the Nene be scaled-down to fit aMeteornacelle. J.P. Herriot or Lombard did the calculation on a tablecloth and announced a thrust of 3,650 lbf (16.2 kN). At this time they were attempting to increase the Derwent's thrust from 2,200 to 2,450 lbf (9.8 to 10.9 kN), and the idea seemed "too good to be true". On hearing this, Hooker did a quick calculation and announced, "We've got a 600-mph [970 km/h] Meteor".[12]

Drawings for the 0.855 scale Nene, now known as the Derwent V, were started on 1 January 1945 and on 7 June the engine began a 100-hour test at 2,600 lbf (12 kN), soon reaching 3,500 lbf (16 kN). Weight was 1,250 lb (570 kg). By 1946 thrust had been increased to 4,200 lbf (19 kN) usingNimonic 90turbine blades.[12]

The development of the Nene was continued with this scaled-down version, the Derwent V having no direct relationship to the earlier Derwent series. On 7 November 1945, the first official air speed record by a jet aircraft was set by a Meteor F.3 of 606 miles per hour (975 km/h) powered by the scaled-down Nene.

Service use

edit

The Nene doubled the thrust of the earlier generation engines, with early versions providing about 5,000 lbf (22.2 kN), but remained generally similar in most ways. This should have suggested that it would be widely used in various designs, but theGloster Meteorproved so successful with itsDerwentsthat theAir Ministryfelt there was no pressing need to improve upon it. Instead a series of much more capable designs using theRolls-Royce Avonwere studied, and the Nene generally languished.

A total of twenty-five Nenes were sold to theSoviet Unionas a gesture of goodwill - with reservation to not use for military purposes - with the agreement ofStafford Cripps.Rolls-Royce were given permission in September 1946 to sell 10 Nene engines to the USSR, and in March 1947 to sell a further 15. The price was fixed under a commercial contract. A total of 55 jet engines were sold to the Soviets in 1947.[13][14]Seventeen Soviet engineers trained at the Rolls-Royce factory in Derby in 1947 to maintain and repair the engine. The Soviets reneged on the promise to not use it for military purposes,[14]andreverse engineeredthe Nene to develop theKlimov RD-45,and a larger version, theKlimov VK-1,which soon appeared in various Soviet fighters includingMikoyan-Gurevich MiG-15.

Pratt & Whitneyacquired a licence to produce the Nene as thePratt & Whitney J42,and it powered theGrumman F9F Pantherwhich first flew in November 1947.[15]

The Nene was used to power the first civil jet aircraft, the Nene Viking,[16]a modifiedVickers Viking,the single example of which first flew on 6 April 1948 fromWisley Airfield.[17][page needed]

It was briefly made under licence in Australia for use in theRAAFde Havilland Vampirefighters. It was also built byOrendain Canada for use in 656Canadair CT-133 Silver Staraircraft from 1952.

Hispano-Suiza inFrancebuilt the Nene under licence as theHispano-Suiza Nene,with limited production before concentrating on the largerRolls-Royce Tay/Hispano-Suiza Verdon.

Variants

edit
RN.1
RN.2
RN.6
Nene I
Nene Mk.3
With an electric starter motor and two torch igniters the Mk.3 powered theSupermarine Attacker F Mk.1.
Nene Mk.10
Similar to the Mk.102 but with a larger accessories wheelcase for theLockheed T-33.
Nene Mk.101
With a bifurcated jet-pipe for theHawker Sea Hawk,at a reduced output of 5,000 lbf (22.24 kN)
Nene Mk.102
Similar to the Mk.3, but incorporating more modern equipment, for theSupermarine Attacker FB Mk.2
Nene Mk.103
Uprated to 5,200 lbf (23.13 kN) for theHawker Sea Hawk FB.5 and FGA.6.Some were retrofitted to convert existing FB.3 and FGA.4 aircraft.
Pratt & Whitney J42
US licence production[18]
J42-P-4
[18]
J42-P-6
[18]
J42-P-8
[18]
Turbo-Wasp JT-6B
[18]
Kuznetsov RD-45
Unlicensed copy produced in the USSR
H.S. Nene 102
[19]
H.S. Nene 104
[19]
H.S. Nene 104-BR
[19]
H.S. Nene 105A
[19]
H.S. Nene 105-AR
[19]

Applications

edit
Nene
Pratt & Whitney J42
Kuznetsov RD-45

Engines on display

edit

Specifications (Nene)

edit
Cutaway view showing the combustion chambers and compressor

Data from[21]

General characteristics

  • Type:centrifugal compressorturbojet
  • Length:96.8 in (2,459 mm)
  • Diameter:49.5 in (1,257 mm)
  • Dry weight:1,600 lb (726 kg)

Components

  • Compressor:single-stage centrifugal with double-sided impeller
  • Combustors:9 x can combustion chambers
  • Turbine:single-stage axial
  • Fuel type:kerosene
  • Oil system:pressure feed, dry sump with scavenge, cooling and filtration

Performance

  • Maximumthrust:(alsoTake off rating) at sea level static 5,000 lbf (22.2 kN) at 12,300 rpm
  • Max Cruise rating:at sea level static 4,360 lbf (19.4 kN) at 12,000 rpm
  • Cruise rating:at sea level static 3,620 lbf (16.1 kN) at 11,500 rpm
  • Idle:at sea level static 120 lbf (0.5 kN) at 2,500 rpm
  • Specific fuel consumption:1.06 lb/(lbf⋅h) (30 g/(kN⋅s))
  • Thrust-to-weight ratio:3.226

See also

edit

Related development

Related lists

References

edit
  1. ^ab"Rolls-Royce Aero Engines" Bill Gunston, Patrick Stephens Limited 1989,ISBN1-85260-037-3,p.111
  2. ^"Not Much Of An Engineer" Sir Stanley Hooker, Airlife Publishing 2002,ISBN1-85310-285-7,p.88
  3. ^Gas Turbines and Jet Propulsion For Aircraft,Geoffrey Smith, Fourth Edition 1946, Published by Flight, Dorset House, Stamford Street, London S.E.1., p.75 and Fig.77
  4. ^Watson, E. A. (1956)."James Clayton Lecture: Fuel Control and Burning in Aero-Gas-Turbine Engines".Proceedings of the Institution of Mechanical Engineers.170.p.54.doi:10.1243/PIME_PROC_1956_170_012_02.
  5. ^"World Encyclopedia of Aero Engines - 5th edition" byBill Gunston,Sutton Publishing, 2006, p.193
  6. ^The First James Clayton Lecture, "The Early History Of The Whittle Jet Propulsion Gas Turbine",Air Commodore F.Whittle,p.430/Fig.20
  7. ^Not Much Of An Engineer,Sir Stanley Hooker 1984,ISBN1-85310-285-7,p.83
  8. ^"R-R W2B".Archived fromthe originalon 7 May 2014.Retrieved29 February2020.
  9. ^Fig.17
  10. ^Rolls-Royce Aero Engines,Bill Gunston 1989,ISBN1 85260 037 3,p.111
  11. ^"Rolls-Royce Nene I".Flight Global.18 April 1946. p. 394. Archived fromthe originalon 29 December 2018.
  12. ^ab"World Encyclopedia of Aero Engines - 5th edition" byBill Gunston,Sutton Publishing, 2006, p.194
  13. ^"Jet Engines (Foreign Sales)".HC Deb, 22 November 1948 vol 458 cc839-41
  14. ^abTaylor, Steven (22 July 2023)."Why Attlee's decision to send Rolls Royce jet engines to Stalin caused outrage in Washington".The Telegraph.ISSN0307-1235.Retrieved25 November2023.
  15. ^Connors, p.202
  16. ^"The Vickers 'Nene/Viking'".Flight,3 March 1949. Retrieved 8 March 2017.
  17. ^Gunston, Bill (1980).The Illustrated Encyclopedia of Commercial Aircraft.
  18. ^abcdeWilkinson, Paul H. (1950).Aircraft engines of the World 1950(11th ed.). London: Sir Isaac Pitman & Sons Ltd. pp. 56–57.
  19. ^abcdeWilkinson, Paul H. (1957).Aircraft engines of the World 1957(15th ed.). London: Sir Isaac Pitman & Sons Ltd. pp. 65–69.
  20. ^"Engines List".City of Norwich Aviation Museum.Retrieved27 August2023.
  21. ^Wilkinson, Paul H. (1946).Aircraft Engines of the world 1946.London: Sir Isaac Pitman & Sons. pp. 298–299.

Bibliography

edit
edit
Wikimedia Commons has media related toRolls-Royce Nene.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Rolls-Royce_Nene&oldid=1253494855"