Tufais a variety oflimestoneformed whencarbonate mineralsprecipitateout of water inunheatedrivers or lakes.Geothermally heated hot springssometimes produce similar (but less porous) carbonate deposits, which are known astravertineorthermogene travertine.Tufa is sometimes referred to asmeteogene travertine.[1]

Tufa columns atMono Lake,California

Classification and features

edit

Modern and fossil tufa deposits abound with wetland plants;[2]as such, many tufa deposits are characterised by their largemacrobiologicalcomponent, and are highly porous. Tufa forms either in fluvial channels or in lacustrine environments. Ford and Pedley (1996)[3]provide a review of tufa systems worldwide.

Barrage Tufa at Cwm Nash,South Wales

Fluvial deposits

edit

Deposits can be classified by their depositional environment (or otherwise by vegetation orpetrographically). Pedley (1990)[4]provides an extensive classification system, which includes the following classes of fluvial tufa:

  • Spring – Deposits form on emergence from aspring/seep.Morphology can vary frommineratrophicwetlands to spring aprons (seecalcareous sinter)
  • Braided channel – Deposits form within a fluvial channel, dominated by oncoids (seeoncolite)
  • Cascade – Deposits form at waterfalls, deposition is focused here due to accelerated flow (seeGeochemistry)
  • Barrage – Deposits form as a series ofphytohermbarrages across a channel, which may grow up to several metres in height. Barrages often contain a significant detrital component, composed of organic material (leaf litter,branches etc.).
Rubaksatufa plug, after drying of the river, in Ethiopia

Lacustrine deposits

edit

Lacustrine tufas are generally formed at the periphery of lakes and built-up phytoherms (freshwater reefs), and onstromatolites.Oncoidsare also common in these environments.

Calcareous sinter

edit

Although sometimes regarded as a distinct carbonate deposit, calcareous sinter formed from ambient temperature water can be considered a sub-type of tufa.

Tufa deposits atHuanglong,Sichuan,China

Speleothems

edit

Calcareousspeleothemsmay be regarded as a form of calcareous sinter. They lack any significantmacrophytecomponent due to the absence of light, and for this reason they are often morphologically closer to travertine or calcareous sinter.

Tufa atTrona Pinnacles,California

Columns

edit

Tufa columns are an unusual form of tufa typically associated withsaline lakes.They are distinct from most tufa deposits in that they lack any significantmacrophytecomponent, due to the salinity excludingmesophilic organisms.[3]Some tufa columns may actually form from hot-springs, and may therefore constitute a form oftravertine.It is generally thought that such features form from CaCO3precipitated when carbonate rich source waters emerge into alkaline soda lakes. They have also been found in marine settings in the Ikkafjordof Greenland where theIkaitecolumns can reach up to 18 m (59 ft) in height.[5]

Biology

edit

Tufa deposits form an important habitat for a diverse flora.Bryophytes(mosses, liverworts etc.) anddiatomsare well represented. The porosity of the deposits creates a wet habitat ideal for these plants.

The Pyramid and Domes tufa rock structures, Pyramid Lake, Nevada

Geochemistry

edit

Modern tufa is formed from alkaline waters, supersaturated with calcite. On emergence, waters degas CO2due to the loweratmosphericpCO2(seepartial pressure), resulting in an increase in pH. Since carbonate solubility decreases with increased pH,[6]precipitation is induced. Supersaturation may be enhanced by factors leading to a reduction inpCO2,for example increased air-water interactions at waterfalls may be important,[7]as may photosynthesis.[8]

Recently it has been demonstrated that microbially induced precipitation may be more important than physico-chemical precipitation. Pedley et al. (2009)[9]showed with flume experiments that precipitation does not occur unless abiofilmis present, despite supersaturation.

Calciteis the dominant mineral precipitate, followed by the polymorpharagonite.[citation needed]

Tufa dam inChelekwot,Ethiopia

Occurrence

edit

Tufa is common in many parts of the world including:

National Park Krka

Some sources suggest that "tufa" was used as the primary building material for most of the châteaux of theLoire Valley,France. This results from a mis-translation of the terms "tuffeaujaune "and" tuffeau blanc ", which are porous varieties of theLate Cretaceousmarine limestone known aschalk.[11][need quotation to verify][12][failed verification]

Dinaric karst watercourses

edit

Uses

edit

Tufa is occasionally shaped into a planter. Its porous consistency makes it ideal foralpine gardens.A concrete mixture calledhypertufais used for similar purposes.

Hollowed out portions of these tufa cliffs once formed back walls of rooms in a large prehistoric pueblo that stood here in Bandelier National Monument. Note outlines of masonry that were the outer portions of structure, and small holes in cliff that once supported ends of floor beams.

In the 4th century BC, tufa was used to build Roman walls up to 10m high and 3.5m thick.[13]The soft stone allows for easy sculpting. Tufa masonry was used in cemeteries, such as the one inCerveteri.[14]

See also

edit

References

edit
  1. ^Pentecost, A. (2005).Travertine.Dordrecht, Netherlands: Kluwer Academic Publishers Group.ISBN1-4020-3523-3.
  2. ^Koban, C.G.; Schweigert, G. (1993). "Microbial origin of travertine fabrics - two examples from Southern Germany (Pleistocene Stuttgart travertines and Miocene riedöschingen Travertine)".Facies.29:251–263.doi:10.1007/BF02536931.S2CID129353316.
  3. ^abFord, T.D.; Pedley, H.M. (1996). "A review of tufa and travertine deposits of the world".Earth-Science Reviews.41(3–4): 117–175.Bibcode:1996ESRv...41..117F.doi:10.1016/S0012-8252(96)00030-X.
  4. ^Pedley, H.M. (1990). "Classification and environmental models of cool freshwater tufas".Sedimentary Geology.68(1–2): 143–154.Bibcode:1990SedG...68..143P.doi:10.1016/0037-0738(90)90124-C.
  5. ^Buchardt, B.; Israelson, C.; Seaman, P.; Stockmann, G. (2001). "Ikaite tufa towers in ikka fjord, southwest Greenland: their formation by mixing of seawater and alkaline spring water".Journal of Sedimentary Research.71(1): 176–189.Bibcode:2001JSedR..71..176B.doi:10.1306/042800710176.
  6. ^Bialkowski, S.E. 2004."Use of Acid Distributions in Solubility Problems".Archived fromthe originalon 2009-02-28.{{cite web}}:CS1 maint: numeric names: authors list (link)
  7. ^Zhang, D.; Zhang, Y; Zhu, A.; Cheng, X (2001). "Physical mechanisms of river waterfall tufa (travertine) formation".Journal of Sedimentary Research.71(1): 205–216.Bibcode:2001JSedR..71..205Z.doi:10.1306/061600710205.
  8. ^Riding, R. (2000). "Microbial carbonates: the geological record of calcified bacterial-algal mats and biofilms".Sedimentology.47:179–214.doi:10.1046/j.1365-3091.2000.00003.x.S2CID130272076.
  9. ^Pedley, M.; Rogerson, M.; Middleton, R. (2009). "Freshwater calcite precipitates from in vitro mesocosm flume experiments: a case for biomediation of tufas".Sedimentology.56(2): 511–527.Bibcode:2009Sedim..56..511P.doi:10.1111/j.1365-3091.2008.00983.x.S2CID129855485.
  10. ^Ascione, Alessandra; Iannace, Alessandro; Imbriale, Pamela; Santangelo, Nicoletta; Santo, Antonio (February 2014)."Tufa and travertines of southern Italy: deep-seated, fault-related CO 2 as the key control in precipitation".Terra Nova.26(1): 1–13.doi:10.1111/ter.12059.
  11. ^Forster, A.; Forster, S.C. (1996). "Troglodyte dwellings of the Loire Valley, France".Quarterly Journal of Engineering Geology and Hydrogeology.29(3): 193–197.doi:10.1144/GSL.QJEGH.1996.029.P3.01.S2CID128896993.
  12. ^"Au Turonien".Une histoire de la Touraine à travers ses roches(in French).Retrieved2010-10-01.
  13. ^Devereaux, Bret (2021-11-12)."Collections: Fortification, Part II: Romans Playing Cards".A Collection of Unmitigated Pedantry.Retrieved2023-09-15.
  14. ^Marini, Elena (January 2010)."A Study of the Architectonic Development of the Great Funerary Tumuli in the Etruscan Necropolises of Cerveteri".Etruscan Studies.13(1).doi:10.1515/etst.2010.13.1.3.ISSN2163-8217.
edit