The 9×39mm is a Soviet rifle cartridge.[2] The cartridge yields increased performance in shorter barrels and effective subsonic performance.
9×39mm | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Rifle cartridge | |||||||||||||||
Place of origin | Soviet Union (Now Russia) | |||||||||||||||
Service history | ||||||||||||||||
Wars | Afghanistan, Ukraine | |||||||||||||||
Production history | ||||||||||||||||
Designer | Undisclosed team of 27 & Nikolai Zabelin | |||||||||||||||
Designed | finished in early 1980s | |||||||||||||||
Specifications | ||||||||||||||||
Parent case | 7.62×39mm | |||||||||||||||
Case type | Rimless, bottleneck | |||||||||||||||
Bullet diameter | SP-5: 9.25 mm (0.364 in) SP-6: 9.26 mm (0.365 in) | |||||||||||||||
Land diameter | 9.00 mm (0.354 in) | |||||||||||||||
Neck diameter | 9.98 mm (0.393 in) | |||||||||||||||
Shoulder diameter | 10.36 mm (0.408 in) | |||||||||||||||
Base diameter | 11.35 mm (0.447 in) | |||||||||||||||
Rim diameter | 11.35 mm (0.447 in) | |||||||||||||||
Rim thickness | 1.50 mm (0.059 in) | |||||||||||||||
Case length | SP-5: 38.76 mm (1.526 in) SP-6: 38.78 mm (1.527 in) | |||||||||||||||
Overall length | 56 mm (2.2 in) | |||||||||||||||
Maximum pressure | 3550 BAR | |||||||||||||||
Ballistic performance | ||||||||||||||||
| ||||||||||||||||
Test barrel length: 270 mm (10.5 in) Source(s): Russian military data, RifleShooter Magazine [1] |
History and design
editThe 9×39 is based on the Soviet 7.62×39mm case but with the neck expanded to fit a 9.2mm bullet. The final design was completed by N. Zabelin, L. Dvoryaninova, and Y. Frolov of the TsNIITochMash in the 1980s. The intent was to create a more stealthy cartridge for suppressed firearms used by Spetsnaz and other special troops that had more power, range, and penetration than 7.62 US subsonic rounds tested at the time.
The subsonic round is originally designed to have an optimistic effective lethal range of 400 to 530 meters and a maximum penetration of up to 10 mm of steel. Like the 5.45×39mm cartridge, the 9×39mm SP-5 features an air pocket in the tip, which increases its tendency to yaw or "keyhole" upon impact, thus increasing soft tissue damage in human targets. The armor-piercing SP-6 cartridge is more effective against light armor, vehicles, or light barrier targets.[citation needed]
Commercial Wolf and Tula brand Ammunition that was being imported into the United States was subsequently banned on September 7, 2021 by President Joseph Biden as part of sanctions against Russia for poisoning of Aleksey Navalny.[3]
While the 9×39 is very popular in several European countries, many of which had previously been under the control of the USSR, it was only introduced in the United States in late 2018.
Since there are many users in the U.S. that had adopted the 9×39 round prior to the import ban, were forced to reload their own ammunition. However, there are multiple companies worldwide who make 9.3mm (.366") Mauser bullets which are suitable for reloading in the 9×39, including Hornady, Barnes, Nosler, Prvi Partizan, Lapua, and others.
Redding Reloading produces a set of full size reloading dies.
Lehigh Defense briefly made prototypes that had limited distribution of their maximum expansion and xtreme penetration copper bullets designs for subsonic rounds.
KAK Industries sold bullets which include 125 gr solid copper, and 140 gr slitted copper projectiles capable of being fired at supersonic velocities.
There are companies such as NOE and LEE which make cast bullet molds for the 9.3mm Mauser cartridge. Powder coated cast bullets generally work exceptionally well at subsonic velocities and have decent expansion in gel targets too.
Roswell Manufacturing has developed and tested what they are calling the 9x39US though it is different specs than the original 9x39 Russian 9x39 Russian C.I.P.
The Roswell cartridge using cases provided by Starline Brass and a 278 gr copper-plated lead bullet with a diameter of .362 inches / 9.19mm are smaller diameter than the .364" Wolf 9x39 imported ammunition and may would not seal the barrel bore as well which is likely to cause more gas blow-by and decreased velocity if one were to try to use it in their existing 9x39 weapons.
During development, Roswell Manufacturing identified significant inconsistencies in existing 9x39mm ammunition and tooling specifications, with some tooling even mislabeled. As a result, Roswell opted for a combination of standards.[4]
Variants
editThis section needs additional citations for verification. (September 2021) |
Cartridge | SP-5(7N8) | SP-5UZ | SP-6(7N9) | SP-6UCh | PAB-9 | SPP | BP(7N12) |
---|---|---|---|---|---|---|---|
Type | Sniper | Test (increased charge) | Armor-piercing | Training | Armor-piercing | Sniper (increased penetration) | Armor-piercing |
Bullet weight [g] | Up to 16.8 | About 16 | Up to 17.3 | ||||
Muzzle velocity [m/s] | 280–320 | 280–290 | 280–305 | 280-320 | 280-310 | ||
Muzzle energy [J] | 658-860 | 678-886 | |||||
Maximum penetration | Up to 8 mm of steel | Up to 8 mm of steel[5] |
SP-5 (7N8) – The SP-5 (СП-5) (SP: Spetsialnyj Patron; "special cartridge") was developed by Nikolai Zabelin. It is a conventional lead core FMJ bullet, developed for accuracy.
SP-5UZ – The SP-5UZ (СП5-УЗ) is an SP-5 variant with an increased charge intended for a factory-specific strength testing of the weapons.
SP-6 (7N9) – The SP-6 (СП-6) was developed by Yuri Frolov. It has a hardened metal armor-piercing core. It can penetrate 2 mm (0.079 in) of steel at 500 meters or 6 mm (0.24 in) of steel, 2.8 mm (0.11 in) of titanium or 30 layers of Kevlar at 200 meters. At 100 meters it can penetrate 8 mm (0.31 in) of steel or GOST 3 rated body armor, while retaining enough power to inflict damage to a soft target behind it.[5][6]
SP-6UCh – The SP-6Uch (СП-6Уч) is an SP-6 variant intended for training.
PAB-9 (7N12) – The SP-6's bullet is expensive to manufacture, so an attempt was made to make a lower-cost version of the cartridge. The PAB-9 (ПАБ-9) used a stamped rather than machined steel core. It sacrificed too much performance to be usable. As of 2011, its usage by Russian troops is prohibited.[5]
SPP – The SPP (СПП) (SPP: Snaiperskiy, Povishennaya Probivaemost; "sniper – increased penetration") is a sniper round with increased penetration.
BP – The BP (БП) (BP: Broneboinaya Pulya; "armor-piercing bullet") is an armor-piercing round. Three modernizations of PAB-9 were created under the designation of BP to remedy its unusable performance.
Weapons
editSee also
editReferences
edit- ^ "The 9x39 – A New Cartridge from Russia". RifleShooter Magazine. 2018-12-14. Retrieved 2020-05-11.
- ^ Николаев, Андриан. "Патроны для стрелкового оружия" [Ammunition for firearms]. Militaryparitet.com (in Russian). Archived from the original on May 2, 2007. Retrieved 2013-12-08.
{{cite web}}
: CS1 maint: unfit URL (link) - ^ "Fact Sheet: United States Imposes Additional Costs on Russia for the Poisoning of Aleksey Navalny". United States Department of State. Retrieved 2024-11-03.
- ^ https://roswell-manufacturing-industries.ammoreadycloud.com/pages/faq
- ^ a b c "Специальные патроны СП-5, СП-6 и ПАБ-9" [Special bullets SP-5, SP-6 and PAB-9.]. artillerist.ru (in Russian). 2008-04-02. Archived from the original on October 16, 2012. Retrieved 2015-03-24.
- ^ F., Nathaniel (2017-11-03). ".300 Blackout vs. 9×39mm: Russia's Subsonic Brute". The Firearms Blog. Retrieved 2020-12-12.
Bibliography
edit- Jane's Infantry Weapons 1997-98 (23rd ed.). Coulsdon, UK: Jane's Information Group. 1997. p. 458. ISBN 0-7106-1548-5.