Anairliftis device based on a pipe, used innautical archaeologyto suck small objects, sand and mud from thesea bedand to transport the resulting debris upwards and away from its source. It is a type ofsuction dredge.A water dredge orwater eductormay be used for the same purpose.[1]
Typically, the airlift is constructed from a 3-metre to 10 metre long, 10 cm diameter pipe. A controllable compressed air supply vents into the inside, lower end of the pipe (The input end always being the lower end). Compressed air is injected into the pipe in one to three second bursts with an interval long enough to let the resulting bubble to rise to the higher, output end of the pipe. The bubble moves water through the pipe sucking debris from the lower end and depositing it from the upper end of the pipe. Ejected debris can be either cast off (as in simply removingoverburden) or collected in a mesh cage for inspection (as more often is the case in nautical archaeology). It is often designed to be hand-operated by adiver.[2]
Airlift pumpsare used by water utilities, farmers and others to extract water from deep wells. In such cases the pipes can be 30, 60 or more meters deep underground. Airlift pumps are governed by the physics oftwo-phase flow.
See also
edit
- Airlift pump– Pump using density difference due to injected air in the liquid
- Gas lift– Raising a fluid by introducing bubbles of gas into the outlet tube
References
edit- ^"Air lift dredge"(PDF).University of North Carolina Wilmington.Archived fromthe original(PDF)on 15 June 2010.
- ^Taylor, Larry "Harris" (1991)."An Air Lift Training Device".Archived fromthe originalon 2011-06-05.Retrieved2008-05-31.