Alpine A108

TheAlpine A108is a light-weight glass-fibre bodied, rear-engined two-doorcoupéproduced for a young competition-oriented Dieppe basedRenaultdealer calledJean Rédélé.The car replaced theAlpine A106and was based on mechanical components from theRenault Dauphine.

Alpine A108
Overview
Manufacturer	Alpine
Also called	Willys Interlagos (Brazil)
Production	1958–1965
Assembly	Dieppe,France São Bernardo do Campo,Brazil
Designer	Giovanni Michelotti& Phillipe Charles
Body and chassis
Class	Sports car
Body style	2-doorCoupé 2-door 2+2Coupé 2-doorCabriolet
Layout	RR layout
Related	Renault Dauphine
Powertrain
Engine	845 ccOHVI4 904 cc OHV I4 998 cc OHV I4
Transmission	3-speed manual 4-speed manual 5-speed manual
Dimensions
Wheelbase	2,100 mm (83 in) 2,160 mm (85 in)
Length	3,700 mm (150 in) 3,780 mm (149 in)
Width	1,450 mm (57 in)
Height	1,270 mm (50 in)
Curb weight	530 kg (1,168 lb) 600 kg (1,323 lb)
Chronology
Predecessor	Alpine A106
Successor	Alpine A110

History

The 108 was launched at theParis Motor Showin autumn 1957, but production volumes were low and the company’s principal offering continued to be the older106model until 1960.

The Alpine 106 had taken its name from the first three digits of the four-digit homologation number of the oldRenault 4CVon which the car was based. Applying the same logic, the new car should have been called 109 because it used mechanical components from the newerRenault Dauphinewhich was registered under the French homologation number 1090, but instead the new car, which inherited many of its non-mechanical components from the 106, was given the name Alpine 108. In this form, where the 106 had used an engine from theRenault 4CV,the new model, as launched in 1957, used theGordiniversion of the 845 cc engine fitted in the Dauphine.

1960 saw the introduction of an Alpine 108 cabriolet and a 2+2 coupé.These versions were slightly longer than the original and featured a newly developed “beams and backbone” chassis with the beams at each end supporting cradles which carried respectively the engine at the rear and the steering mechanism at the front. This basic architecture would be used for Alpine sports cars until theAlpine A110was phased out in 1977. These models, like the original coupé, were assembled byChappe et Gessalin,but with a wheelbase lengthened by 7 cm (2.8 in). The mechanical elements were as before, with the Renault Dauphine engine offered in 845 cc or 904 cc form. The lesser engine offered 37 hp (27 kW), while the bigger one claimed 53 hp (39 kW). By the time production of the 108 came to an end in 1965, fewer than 100 of these lengthened versions had been produced.

The 108 played an important part in the transformation of Alpine into a mainstream (though always low volume) car producer. In 1960, an upgraded version of the model known as the Berlinette Tour de France replaced the original “coach” version of the car. The obvious visual difference was at the front, where the headlights were now integrated into the front wing behind a windcheating perspex cover. This was the model offered in the showrooms from autumn 1960 and which continued in production until 1965, preparing the way for the commercially more successfulA110.

Brazilian production

The Brazilian A108 – 1964 Willys Interlagos Berlinette

The A108 was also produced in Brazil, thanks to an agreement with Willys-Overland. Renamed asWillysInterlagos, the model was built in three versions:berlinette,coupé,andconvertible.The car also had a successful racing career. From 1962 to 1966, a total of 822 Interlagos were made inSão Bernardo do Campo,São Paulo.

Further reading

• Alpine. Tous les modèles. Toutes les années,par Dominique Pascal. Massin éditeur.ISBN2-7072-0204-5
• Ulrich Bethscheider-Kieser; Mike Riedner (Publisher.): Autos die Geschichte machten. Renault Alpine. Motorbuch Verlag, Stuttgart 1991,ISBN978-3-613-01407-7,S. 156, DNB 911285024

External links

• Allgemeine Informationen zur Alpine A108