Wikipedia

BMW 5 Series (E12)

(Redirected fromBMW E12)

TheBMW E12is the first generation of5 Seriesexecutive cars, which was produced from 1972 to 1981 and replaced the saloon models of theBMW New Classrange.

BMW 5 Series (E12)
Overview
Production1972–1981
Model years1972–1981
Assembly
DesignerPaul Bracq
Marcello Gandini
Body and chassis
ClassExecutive car(E)
Body style4-doorsedan
LayoutFR layout
RelatedBMW 6 Series (E24)
Powertrain
EnginePetrol:
Transmission
Dimensions
Wheelbase2,636 mm (103.8 in)
Length
  • 4,620 mm (181.9 in)
Width1,690 mm (66.5 in)
Height1,425 mm (56.1 in)
Curb weight1,235–1,565 kg (2,722.7–3,450.2 lb)
Chronology
PredecessorBMW New Class
SuccessorBMW 5 Series (E28)

Initial models were powered by inline-four engines, using either a carburettor or fuel-injection. A year after launch, the first model powered by a straight-six engine was introduced. By the final years of E12 production, most models used a straight-six engine.

There was no M5 model for the E12, however the E12 M535i is considered to be the predecessor to the M5. TheE24 6 Seriescoupés were built on the E12 platform up until 1982. The E12 was replaced by theE28 5 Seriesin 1981, although the tools were sent to South Africa where E12 assembly continued (with E28 interiors) until 1984.

Development

edit
BMW 2200ti Garmisch
BMW 2200ti Garmisch rear

At the 1970Geneva Motor Show,BMW unveiled the 2200ti Garmisch concept car, a 2-door saloon which was developed in conjunction withBertone.[1]The 2200ti Garmisch concept car was shown as a potential replacement for the New Class saloons and the eventual E12 production model utilized many design elements from the Garmisch.[2]

Development of the E12-series had begun by the end of the 1960s, when wind tunnel tests were conducted.[3]Eberhard von Kuenheim,then chairman of BMW's supervisory board, hired French designerPaul Bracqin 1970 to work as the E12's Chief of design,[4][5][6]withMarcello GandiniofBertoneas co-designers of the exterior.[7][8]

In 1971, a road-legal E12 prototype, which looked similar to aFiat 132,was made.[9]Also in 1971, Paul Bracq had finalised the E12's design, however, compared with the later series production E12, Bracq's design car had a more stretched, and dynamic appearance.[10]Computers were used in BMW development for the first time to calculate front and rearcrumple zones;the roof was designed with arollover protection structure.[11]The body has adrag coefficientof 0.44.[12]BMW had previously located turn signal stalks on the right hand side of the steering wheels, and the E12 was their first model to have the stalk on the left side.[13][14]

Before the E12 had been introduced, there were rumours that it would be available with both a 2.2 litre four-cylinder engine, and a small six-cylinder engine.[15]Instead, BMW carried over the 2-litre four-cylinderM10 enginesfrom theNew Classsaloons, but modified the cylinder heads in order to improve combustion.[16]With the introduction of the E12-series in 1972, BMW offered two models, the carburetted 520, which had a Strombergconstant pressure carburettor,and the manifold injected 520i, which came with a Kugelfischer PL 04 injection pump.[15]A small six-cylinder model called "523" had been developed, but was never put into series production.[17]Eventually, the small six-cylinder model "520" was put into production in 1977, but in a 2-litre version rather than a 2.3 litre version.[12]

Originally, four-cylinder cars have a bonnet with a sunken central portion whereas on six-cylinder cars this section is raised. The leading edge of the bonnet was flat. After the August 1976 facelift all models featured the same bonnet, with a narrow raised central section reaching all the way forward and wrapping around the "kidneys". M30-engined cars can be identified by the grille having a chrome surround.

To meet Sweden's unique and stringent emissions standards, a fuel injected version of the 528 was developed and entered production in June 1977. Called the 528i, this was successful enough that it replaced the 528 in most markets.[18]

  • Rear view, until 1976
  • Rear view, after facelift
  • Interior

Engines

edit
Model Engine Power Torque Years
518 1.8 LM10
straight-4		 66 kW (90 PS)
at 5,500 rpm		 143 N⋅m (105 lb⋅ft)
at 3,500 rpm		 1974–1981
520 2.0 LM10
straight-4		 85 kW (115 PS)
at 5,800 rpm		 165 N⋅m (122 lb⋅ft)
at 3,700 rpm		 1972–1977
520i 2.0 LM10
straight-4		 96 kW (130 PS)
at 5,800 rpm		 178 N⋅m (131 lb⋅ft)
at 4,500 rpm		 1972–1975
92 kW (125 PS)
at 5,700 rpm		 172 N⋅m (127 lb⋅ft)
at 4,350 rpm		 1975–1977
520/6 2.0 LM20
straight-6		 90 kW (122 PS)
at 6,000 rpm		 160 N⋅m (118 lb⋅ft)
at 4,000 rpm		 1976–1981
525 2.5 LM30
straight-6		 107 kW (145 PS)
at 6,000 rpm		 211 N⋅m (156 lb⋅ft)
at 3,700 rpm		 1973–1976
110 kW (150 PS)
at 5,800 rpm		 208 N⋅m (153 lb⋅ft)
at 4,000 rpm		 1976–1981
528 2.8 LM30
straight-6		 121 kW (165 PS)
at 5,800 rpm		 234 N⋅m (173 lb⋅ft)
at 4,000 rpm		 1974–1976
125 kW (170 PS)
at 5,800 rpm		 234 N⋅m (173 lb⋅ft)
at 4,000 rpm		 1976–1978
528i 2.8 LM30
straight-6		 130 kW (177 PS)
at 5,800 rpm[18]		 246 N⋅m (181 lb⋅ft)
at 4,500 rpm		 1977–1981
(Sweden)
129 kW (175 PS)
at 5,800 rpm		 235 N⋅m (173 lb⋅ft)
at 4,300 rpm		 1977–1978
(US only)
126 kW (171 PS)
at 5,600 rpm		 230 N⋅m (170 lb⋅ft)
at 4,500 rpm		 1979–1981
(US only)
135 kW (184 PS)
at 5,800 rpm		 235 N⋅m (173 lb⋅ft)
at 4,200 rpm		 1978–1981
530 3.0 LM30
straight-6		 130 kW (177 PS)
at 5,800 rpm		 250 N⋅m (184 lb⋅ft)
at 3,500 rpm		 1975–1978
(South Africa only)
530i 131 kW (178 PS)
at 5,500 rpm		 251 N⋅m (185 lb⋅ft)
at 4,500 rpm		 1975–1978
(US only)
530 MLE 147 kW (200 PS)
at 5,800 rpm		 251 N⋅m (185 lb⋅ft)
at 3,500 rpm		 1976
(South Africa only)
533i 3.2 LM30
straight-6		 147 kW (200 PS)
at 5,500 rpm		 290 N⋅m (214 lb⋅ft)
at 4,250 rpm		 1974–1979[19]
M535i 3.5 LM90
straight-6		 160 kW (218 PS)
at 5,200 rpm		 310 N⋅m (229 lb⋅ft)
at 4,000 rpm		 1980–1981
M10 inline-four engine

The data above are manufacturer claims.[20]Power and torque data is measured according to the German StandardDIN 70020.

The 518, 520 and 520i models were fitted with the 1.8 L and 2.0 LM10inline-four engines, as per the previousNew Class saloons.The 525, 528, 530, 530i and 533i models were fitted withM30straight-six engines, as used in theNew Sixlarge saloons andE9coupés. The 520, and 523 (the latter was developed, but never put into series production), use theM20straight-six engine.

The 518 had its fuel supplied by aSolex32/32 DIDTAcarburetor,[21][22]while the initial 520 model (powered by the M10 inline-four engine) used twin Stromberg 175CDET carburettors.[23][24]The straight-six engine 525 and 528 models used dualZenithINAT two-barrel carburettors up until the 1976 facelift.[25][26]The straight-six 520 used a Solex 4A1 carburettor.[27]

Fuel-injected models have the letteriat the end of their model designation. The 520i used theKugelfischermechanical fuel injection system from the2000tiiand2002tiiuntil 1975.[28]From 1975, it was fitted with a mechanical continuous BoschK-Jetronicport injection.[29]The 518i (only sold in Sweden and Japan), 528i, and 530i (only sold in the US and Japan) have aBosch L-Jetronicport injection.[12]

Suspension

edit

The BMW E12 has a self-supporting body, a longitudinally mounted front engine, and rear-wheel drive. All four wheels are suspended independently. The front wheels haveMacPherson strutswith coil springs, hydraulic shock absorbers, and transverse control arms. The rear axle hassemi-trailing armswith coil springs, and hydraulic shock absorbers. Models with a power output of 125 PS (92 kW) or more have an additional sway bar on the rear axle. All models except the M535i have 14-inch steel alloy wheels with a wheel-width of either 5.5 or 6 inches. Therefore, the tyre size is either 175 mm or 195 mm. All models useworm and sectorsteering, which is power assisted from the 528 onwards. The braking system is a dual-circuit system with front disc brakes; on the rear wheels, 518/520/i models were fitted with drum brakes, all models from the 525 onwards have disc brakes.[12]

Drivetrain

edit

The 4-speed manual transmission options consisted of:[30]

  • Getrag 242 4-speed (for M10/M20/M30 engine models)
  • Getrag 262 4-speed (M30 engine)
  • ZF S4-18/3 4-speed (M30 engine)

The 5-speed manual transmission options consisted of:

  • Getrag 235 5-speed (M10 engine)
  • Getrag 245 5-speed (M10/M20 engines)
  • Getrag 265 5-speed (M30 engine)

The automatic transmission options—all 3-speed transmissions—consisted of:

  • ZF 3HP12 (M10 engine)
  • ZF 3HP20 (M30 engine)
  • ZF 3HP22(M20/M30 engines)
  • BorgWarnerBW65 (M30 engine)

Special models

edit

On the Belgian and Greek markets, there was a BMW 518 Deluxe version. One thousand of these cars were sold in 1979–1980. This was a BMW 518 equipped as the 528i top model with additional luxury items such as headrests on the back seats. It was rumored that this special version was produced for the Iranian government, as a car for top officials under the shah's rule. Due to the Iranian revolution these cars were never delivered. Instead, they have been sold as a special version in Belgium and Greece.

The Portuguese market also received nearly 700 CKD units due to the local regulations that demanded a certain number of vehicles sold in Portugal to be locally assembled.

For the Swedish market the complete BMW 5 range was not offered, due to local emissions regulations.[31]For the early E12 the models BMW 518, BMW 520, BMW 520i, and BMW 525 were offered - with the BMW 528 missing. The series 2 range of was reduced to three models: BMW 518i, BMW 520i and BMW 528i.[18]The 528i became available as a result of Switzerland having adopted the same emissions rules, making it worthwhile to develop such a version. Unique to the Swedish market were a BMW 518i and a BMW 520i, fitted with the identical 2 litre engine, but the BMW 518i receiving poorer equipment. The BMW 520i was fitted with chromed wheel rings and a locking fuel cap. It was also fitted with head restraints in the rear, an armrest in the middle of the rear bench, steering wheel height adjustment, seat height adjustment for the drivers seat, a wooden shifter knob, and a rear heater.[18]

Motorsport versions

edit

Beginning in 1974,BMW M(then called 'BMW Motorsport') offered theMotorsport 530,Motorsport 530iandMotorsport 533ias special order upgrades for the 525, 528 and 528i models. The Motorsport 530 used the carburetted 180 PS (132 kW; 178 hp) engine from theBMW 3.0S,[32]the Motorsport 530i[33]used the fuel-injected 200 PS (147 kW; 197 hp) engine from theBMW 3.0Siand the Motorsport 533i[34]used the injected 3.2-liter engine from theE24 633CSi.[35]Other modifications were a shorter differential ratio of (3.45:1 for the 530 and 3.25:1 for the 530i),[33]a 25% LSD, vented disc brakes,Bilstein shock absorbers,Scheel orRecarosports seats, a sports steering wheel, alloy wheels on lower profile tyres, and optional front and rear spoilers.[35]

Later, the similarMotorsport 535ipackage was available for the 525i/528i model, consisting of the 3.5L engine from theE24 635CSi.[36]

M535i

edit
M535i model atConcorso d'Eleganza Villa d'Este,Villa Erba 2022

The first M-badged 5 Series was the M535i,[37]which began production in 1980. The M535i is powered by the 3.5 L (214 cu in)M90straight-six engine which produces 160 kW (215 bhp). The sole gearbox choice is a 5-speed manual and 1,650 M535i cars were produced (including 240 CKD for South Africa).[38]Features include optional front and rear spoilers, optional M-striping, sports suspension,Recarosport seats, the steering wheel from theBMW M1,a dogleg close-ratio transmission, a limited-slip differential and larger brakes.[39][40][41]

The M535i is considered to be the predecessor to theBMW M5model, which has been produced since the E28 generation.[42][43]

Alpina B7

edit
Alpina B7 S Turbo

TheAlpinaB7 TurboandB7 S Turbowere based on the E12.

530 MLE

edit

In South Africa, the 530 MLE was produced as a homologation special for racing, with 218 cars produced.[44][45]The engine is a 3.0 L (183 cu in)M30,producing 132 kW (177 bhp).[46]Significant weight reduction measures were undertaken, included body panels made from aluminium or thinner steel.[47]

Model year changes

edit

1974

  • 518 and 528 models introduced,[48][49]producing 66 kW (90 PS; 89 hp) and 121 kW (165 PS; 162 hp) respectively.[50]: 89 .Motorsport upgrades available as special order in 530, 530i or 533i guise.[19]

1975

1976 facelift

With the introduction of theE23 7 Series,the E12 received afaceliftin September 1976. The styling was overseen by Claus Luthe.[52]The rear-mounted gasoline filler door was relocated to the side of the car and the taillights were widened. Thehoodwas redesigned to a give a 'power bulge' which accentuated the BMW kidney grille, and the dashboard ventilation was repositioned to improve air distribution.

As part of the facelift, the 520 model switched from the M10 inline-four engine to theBMW M20straight-six engine, with the post-facelift 520 model often referred to as the 520/6. However, the M10 engine continued to be used in South Africa, due to local content laws. Even after the M20 entered local production in 1979, the 2.0-litre M10 continued to be available with "518" badges in South Africa.[53]In other markets the only inline-four M10 post-facelift model available was the 1.8-litre 518 which carried on as the base model until the end of production.

For the 525 and 528 models, the dualZenithcarburettors were replaced with a singleSolex4A1 DVG four-barrel,[54][55]which increased power to 125 kW (170 PS; 168 hp) in the 528.[56]: 25 

  • Pre-facelift front
    until 1976 (four-cylinder)
  • Pre-facelift front (six-cylinder)
  • Pre-facelift rear
  • Post-facelift front
  • Post-facelift rear
  • Interior Post-facelift 1976

1978

  • The 528i model, using Bosch L-Jetronic fuel injection, begins production in July[57]as a replacement for the carburetted 528 which was discontinued in September 1977.

1979

  • 535i Motorsport available as special order only[19]

1980

  • M535i model introduced

North American models

edit

Initially, the only model sold in the United States was the 530i, which was powered by a fuel-injected straight-six engine. Changes for American-market E12s include lower compression pistons,exhaust gas recirculation,an air pump and modified exhaust manifolds called Thermal Reactors.[58]The North American E12 models had larger bumpers (designed to withstand a 5 mph (8.0 km/h) collision without body damage), which increased the overall length by 206 mm (8.1 in).

For the 1979 model year, the 528i replaced the 530i.[59]To reduce emissions, the thermal reactor and air pump system were replaced with a 3-waycatalytic converterand the car's Bosch L-jetronic fuel injection system was now fitted with an exhaust gasoxygen sensor.[60][61]Power was reduced by 5 kW (7 bhp), and the presence of the catalytic converter meant that unleaded gasoline (petrol) was required.[58]

South African models

edit

In South Africa, the E12 was introduced in March 1974, imported fully knocked-down and assembled in Rosslyn by BMW South Africa with a separate VIN number (starting with ABM). The facelift model arrived a bit later than in Europe, in February 1977. Only a limited range of engines were available, to minimize costs and to help meet local parts requirements, with most engine options being the carburetted versions.[62]In spite ofwidespread sanctions,locally built E12s also saw some export, the 520 being sent to Argentina and the 518 De Luxe to Belgium, Iran, and Italy.[62]

To keep costs down, BMW chose to continue building the E12 in South Africa after the E28 had been introduced elsewhere, with the body now pressed and manufactured locally. Called the E12/8, this model received the new E28 interior and all fuel injected engines, tuned with fuel economy in mind. At the exterior, it received a chrome strip around the entire front grille. This model continued to be manufactured until September 1985, after which the next generation was finally introduced to South Africa.[62]In total, 23,100 of the E12/8 were built; the models offered were the 518i, 520i, 528i, and M535i.[63]

Critical reception

edit

While being commended for its acceleration and build-quality,Modern Motorcriticised the 1978 528i for unpredictable handling and excessive body roll.[64][65]Steering corrections during cornering meant the car's body "lurches back annoyingly and messily", in part due to the soft springing and hard damping combination. In comparison to theJaguar XJ6andPeugeot 604,the car was viewed as narrow and cramped in the rear and prone to wind noise.[66]

Production

edit

Production of the E12 occurred from June 1972 to 1981,[67]with a total of 699,094 cars produced.[68]Initially, the cars were produced in Munich, West Germany. Following the opening of the newBMW Group Plant Dingolfingin September 1973, production was phased over to the Dingolfing plant.[69]

Complete knock-downassembly of German-produced kits took place inRosslyn, South Africa;[70]Jakarta, Indonesia(by Gaya Motor);[71]and Thailand.

References

edit
  1. ^"Rare BMW concepts from the sixties".bimmerin.net.Retrieved26 August2017.
  2. ^Wasef, Basem."BMW Just Reincarnated a Long-Lost, 50-Year-Old Concept Car".
  3. ^Schneider, Hans J. (2007),BMW 5er – Technik + Typen, Modelle bis 1997[BMW 5 Series - Specifications and versions up to 1997] (in German), Bielefeld, Germany, p. 8,ISBN978-3-7688-5789-5{{citation}}:CS1 maint: location missing publisher (link)
  4. ^Norbye, Jan P. (1984)."Expanding on Excellence: The 5-Series and 3-Series".BMW - Bavaria's Driving Machines.Skokie, IL: Publications International. p.209.ISBN978-0-517-42464-3.Dimensionally, the 5 Series differed only slightly from its New Class predecessors, but Paul Bracq's modern, stylish four-door body was far less boxy in appearance.
  5. ^"Legendary Car Designer Paul Bracq Remembers His BMW Years".carscoops.2014-12-18.Retrieved21 August2017.
  6. ^"The First 5 Series Changed It All for BMW".roadandtrack.2016-12-28.Retrieved21 August2017.
  7. ^"BMW Car Designers".bmwism.Archived fromthe originalon 18 October 2012.Retrieved24 May2019.
  8. ^"Automotive History: The Cars Of Claus Luthe".curbsideclassic.Retrieved19 August2017.
  9. ^Schneider,p. 9
  10. ^Schneider,p. 10
  11. ^Schneider,p. 13
  12. ^abcdSchneider,p. 201
  13. ^"2.5CS-3.0CSL 3.0CSL Switch".realoem.Retrieved21 August2017.
  14. ^"5' E12 520 Steering column switch".realoem.Retrieved21 August2017.
  15. ^abSchneider,p. 16
  16. ^Schneider,p. 17
  17. ^Schneider,p. 15
  18. ^abcdBjörklund, Stig (ed.),Alla Bilar -80[All Cars 1980] (in Swedish), Stockholm, Sweden: Specialtidningsförlaget AB, p. 45,ISBN91-7274-093-0
  19. ^abc"e12.de®".
  20. ^Models table data sources:
  21. ^"1974 BMW 518 E12".carfolio.Retrieved23 August2017.
  22. ^"1975 BMW 518 (model up to mid-year 1975 for Europe ) specifications & performance data review".automobile-catalog.Retrieved23 August2017.
  23. ^"1972 BMW 520 E12".carfolio.Retrieved23 August2017.
  24. ^"1972 BMW 520 (model since mid-year 1972 for Europe Australia ) specifications & performance data review".automobile-catalog.Retrieved23 August2017.
  25. ^"1973 BMW 525 E12".carfolio.Retrieved23 August2017.
  26. ^"BMW 528 Automatic, 1975 MY".carfolio.Retrieved23 August2017.
  27. ^Schneider,p. 45
  28. ^"13511259882 Exch. INJECTION PUMP".realoem.Retrieved23 August2017.
  29. ^Schneider,p. 42
  30. ^"5' E12 Model Selection".realoem.Retrieved27 August2017.
  31. ^Björklund, Stig (ed.),Alla Bilar -76[All Cars 1976] (in Swedish), Stockholm, Sweden: Specialtidningsförlaget AB, p. 18,ISBN91-7274-037-X
  32. ^"BMW 530 Motorsport".e12.de.Retrieved9 January2018.
  33. ^ab"BMW 530i Motorsport".e12.de.Retrieved9 January2018.
  34. ^"BMW 533i Motorsport".e12.de.Retrieved9 January2018.
  35. ^ab"BMW M Registry - FAQ E12 M535i".bmwmregistry.Retrieved9 January2018.
  36. ^"The Story of 40 Years BMW M ‒ The BMW M5".gtspirit.2012-06-06.Retrieved9 January2018.
  37. ^"The BMW 5-Series: A Personal Look Back".jalopnik.14 April 2010.Retrieved25 August2017.
  38. ^"Baureihe BMW 5er (E12)".bmw-grouparchiv.de(in German).Retrieved25 August2017.
  39. ^"BMW History: The M535i".bmwblog.7 January 2015.Retrieved25 August2017.
  40. ^"E12 M535i General Information".m535i.org.Retrieved25 August2017.
  41. ^"BMW E12 M535i 35th anniversary - road test".drive-my.24 February 2015.Retrieved25 August2017.
  42. ^Ramey, Jay, ed. (16 January 2015)."Watch BMW look back at the M5's predecessor [BMW commercial]".autoweek.Retrieved19 August2017.
  43. ^"The Seven Best BMW 5-Series of All Time".roadandtrack.2016-11-09.Retrieved19 August2017.
  44. ^"Forgotten Beginnings – 530 MLE".drive4corners.17 February 2014.Retrieved25 August2017.
  45. ^"530 MLE E12".African Muscle Cars.Retrieved16 December2013.
  46. ^"BMW E12 5 Series 530 MLE (South Africa) Specs".ultimatespecs.Retrieved25 August2017.
  47. ^"BMW 530 Motorsport Limited Edition".firstfives.org.Retrieved25 August2017.
  48. ^"Detailed specs review of 1974 BMW 528".automobile-catalog.Retrieved29 December2018.
  49. ^"BMW E12 5 Series 528 Technical Specs, Dimensions".ultimatespecs.Retrieved29 December2018.
  50. ^Betriebsanleitung 518, 520, 525, 528, 520i.BMW. 15 January 1975.Retrieved29 December2018.
  51. ^"5' E12 520i FUEL INJECTION K-JETRONIC".realoem.
  52. ^"Tan, But Not Beige: 1980 BMW 528i E12".dailyturismo.3 October 2015.Retrieved19 August2017.
  53. ^Haler, Justin, ed. (July 1979). "BMW's small six 520".SA Motor.17(7). Randburg, South Africa: SA Motor (Pty) Ltd: 26.
  54. ^"1976 BMW 525, 1978 MY E12".carfolio.Retrieved23 August2017.
  55. ^"BMW 528 Automatic, 1976 MY E12".carfolio.Retrieved23 August2017.
  56. ^Fahrzeugprospekt 518 520 520i 525 528.BMW. January 1977.Retrieved29 December2018.
  57. ^"1977 BMW 528i (model since mid-year 1977 for Europe Australia ) specifications & performance data review".automobile-catalog.Retrieved23 August2017.
  58. ^abRoad & Track's Road Test Annual & Buyer's Guide 1979,Greenwich, CT: CBS Publications, January–February 1979, p. 83
  59. ^"5'E12 528i model selection".realoem.Retrieved25 August2017.
  60. ^"Converting a 530i to L-Jetronic with Lambda Control".firstfives.org.Retrieved25 August2017.
  61. ^"1979 BMW 528i (model for Europe Australia ) specifications & performance data review".automobile-catalog.Retrieved25 August2017.
  62. ^abcThieme, Ulrich."BMW South Africa".e12.de.Archived fromthe originalon 2022-08-15.
  63. ^Thieme, Ulrich."Section E12 (BMW E12 and E28 IG)".e12.de.Archived fromthe originalon 2017-05-14.
  64. ^"BMW's 528i vs Holden's Kingswood [road test]",Modern Motor,p. 29, February 1978
  65. ^"Driving Every Generation of the BMW 5 Series".topgear.2017-01-13.Retrieved27 August2017.
  66. ^"Giant Test: Peugeot 604-v-Jaguar XJ3.4-v-BMW 528/ Tough test for the new boy on the block",Car,pp. 58ff (7 pages), November 1975
  67. ^"Produktionsbeginn der neuen 5er Baureihe (E12)".bmw-grouparchiv.de(in German).Retrieved24 December2018.
  68. ^Oswald, Werner (2001).Deutsche Autos 1945-1990, Band 4(1st ed.). Stuttgart: Motorbuch Verlag.ISBN978-3-613-02131-0.
  69. ^"Photoshoot with the iconic BMW E12 M535i".bmwblog.29 December 2016.Retrieved24 May2019.
  70. ^"Photoshoot with the iconic BMW E12 M535i".bmwblog.2016-12-29.Retrieved19 August2017.
  71. ^"Indonesia".e12.de.Retrieved24 March2018.
Retrieved from "https://en.wikipedia.org/w/index.php?title=BMW_5_Series_(E12)&oldid=1258047396"