M151 ¼-ton 4×4 utility truck

M151 Truck, Utility, ¼-Ton, 4×4
M151 Truck, Utility, ¼-Ton, 4×4
	The M151 A2, first introduced in 1968.
Overview
Manufacturer	Ford,Kaiser,AM General
Production	> 100,000 (1959–1988) last production of 1,000 units built for Pakistan (1988) At AM General and line dismantled.
Body and chassis
Class	¼ ton truck/personnel transport,four wheel drive
Body style	jeep
Layout	Front engine, 4WD
Related	M422 "Mighty Mite"contemporary
Powertrain
Engine	inline 4-cyl.,141.5 cu in (2.319 L); 71 hp (53 kW) at 4,000 rpm / 128 ft⋅lbf (174 N⋅m) at 1,800 rpm
Transmission	4-speed + reversemanual transmission; single-speed, part-timetransfer case
Dimensions
Wheelbase	85 in (2,160 mm)
Length	132.7 in (3,370 mm)
Width	64.3 in (1,630 mm)
Height	71 in (1,800 mm) with top up; reducible to 53 in (1,350 mm)
Curb weight	2,400 lb (1,100 kg)
Chronology
Predecessor	Willys M38A1
Successor	AM General HMMWV

TheTruck, Utility, ¼-Ton, 4×4,or simplyM151was the successor to the Korean WarM38andM38A1 Jeep Light Utility Vehicles.The M151 had anintegrated bodydesign which offered a little more space than prior jeeps, and featured all-aroundindependent suspensionwith coil springs. It has since been replaced by the largerAM General HMMWVin most utility roles in frontline use. With some M151A2 units still in U.S. military service in 1999, the M151 series achieved a longer run of service than that of the World War II/Korean War-eraMB/GPW,M38, and M38A1 series combined.

History

In 1951Ford Motor Companywas awarded the contract to design a ¼-ton 4×4 truck to replace the M38 and M38A1 model jeeps. The M151 was developed to specifications and guidance of the U.S. Army's Ordnance Tank Automotive Command. Design started in 1951 and testing and prototyping lasted through most of the fifties. Although the M151 was developed and initially produced by Ford, production contracts for the M151A2 were later also awarded toKaiserandAM General Corp,a subsidiary of AMC.

Design

M151A2 with top up and closed

Although the M151 mostly retained the same basic layout and dimensions of its predecessors, it was for all intents and purposes a completely new design. Unlike previous jeep designs, whose structure consisted of a steel tub bolted onto a separate steel frame, the M151 utilized anintegrated framedesign, which integrated the box frame rails and the sheet-steel body into aunibodystructure. Eliminating the separate frame gave the M151 slightly more ground clearance, while at the same time lowering the center of gravity. Although the vehicle's dimensions were only slightly enlarged — the 85 inch wheelbase was 4 inches longer than its predecessor, or 5 inches compared to theWillys MB,and the width was increased 3 inches — combined with the improved space efficiency of the integrated body design, the vehicle was a bit roomier than previous jeeps, while retaining the same light weight.

Front has grille with horizontal slats

Another area improved upon in the M151 was the suspension. Dispensing with the rigidlive axlesin the front and rear that allprevious military jeepsused (a layout still used on modern day Jeeps, such as theJeep CJandWrangler), the M151 was instead equipped withindependent suspensionand coil springs. This made it capable of high-speed, cross-country travel, while boasting high maneuverability and agility. The new suspension also had the added benefit of providing a more comfortable ride.

Due to copyright and trademark issues, the M151 did not feature Jeep's distinctive seven vertical slot grille, instead, a horizontal grille was used.

Handling problems

Unlike other military transports, such as the WWII and Korean War-eraJeepsand Dodge and Chevrolet transport trucks, the M151 was never widely released into the civilian market. This was partly because it did not meet federal highway safety standards for civilian vehicles, and because of a series of rollover accidents. While the high pivot rearswing axlegeometry on the M151A1 was responsible for the rollovers, injuries and fatalities, the industry (Ford and the Army) claimed that they were primarily due to driver errors, with operators unprepared for the increased performance compared to the Jeeps, which it replaced. The swing axle rear design was prone to significantcamberchanges when subjected to cornering, resulting in the rear lifting, the inside wheel tucking under which often led to a vehicle rollover. Steering input as commonly found in a high-speed emergency avoidance maneuvers or hard cornering, was a recipe for disaster. The vehicle's tendency to lose control was reduced when there was weight in the rear, so drivers would often place an ammunition box filled with sand under the rear seat when no other load was being carried. The box could simply be emptied or abandoned when the extra weight was not needed.Recoilless riflecarrier models were especially prone to rollover accidents due to their stiffer rear springs and were typically subjected to severe speed restrictions any time the gun was not aboard.

Ford Motor Company designed the M151A1 beginning in 1951. By 1965 the world knew of the problems with swing axles (e.g.Unsafe at Any Speedby Ralph Nader). Nevertheless, when, in 1969, an automotive engineer at theHuman Engineering LaboratoryatAberdeen Proving Groundwrote a report that included: 1) an analysis that showed the high pivot swing axle in the M151A1 was inherently unstable under cornering, 2) retrofits that had proven to solve the problem onCorvairs,VWs, andFormula Veesand, 3) ways of designing a replacement. The Director of the Human Engineering Lab rejected this report and when the solutions were forwarded to the Ford engineers they rejected them as well.

The handling issues were eventually resolved by a redesign of the rear suspension, introduced in the M151A2 model. However, due to liability concerns, the U.S. Department of Defense deemed all M151 series vehicles "unsafe for public highway use", limiting their public use. Continuing problems with vehicle roll-overs into the 1980s led the U.S. military to retrofit many M151 series vehicles with the "Roll over protection structure"(ROPS), a roll cage intended to protect both front and rear seat passengers.

Service

Soldiers of the 82nd Airborne Division in a heavily loaded M151 duringOperation Urgent Fury

First put into service in the early 1960s, the M151 played an active part in US military operations well into the 1980s, when it was phased out in favor of theHMMWV.Despite its official replacement, the M151 has some distinct advantages over its much larger and heavier successor, like being small enough to fit inside aCH-53heavy transport helicopter.

Various models of the M151 have seen successful military service in 15 differentNATOcountries and M151s were sold to many countries, including Canada, Denmark, the United Kingdom and non-NATO countries like Egypt, Lebanon, Israel, the Philippines, and Pakistan. Currently,^[when?]the M151 is used by over 100 countries worldwide.

Post-military use

In the late 1980s the M151s began being phased out of service in favour of the HMMWV. A few (perhaps 1,000) were sold via Government Surplus auctions, and those that were not sold viaForeign Military Sales(FMS) overseas were cut into four pieces and scrapped. However some individuals were able to buy these "quartered" M151s and simply weld the four sections back together, and rebuilt them into drivable condition. Some vehicles sold in the United States were simply cut in half, some of which were simply welded back together and driven. Additionally, beginning in the late 1990s a few companies dealing in Military surplus items bought M151s from some of the foreign governments that received the vehicles via FMS for reconditioning and further sales.^{[citation needed]}

The Growler

A Growler Light Strike Vehicle, Prime Mover variant, for the U.S. Marine Corps in December 2005, with a towed mortar.

Growler Manufacturing and Engineeringdesigns and sells theInternally Transportable Light Strike Vehiclebased on the M151 drivetrain. The Internally Transportable Light Strike Vehicle is intended to replace Fast Attack Vehicle variants of the M151, and is reduced in size to fit into theV-22 Ospreytiltrotor transport. Although originally intended to utilize the M151 drivetrain, the result is an all new design and contains no M151 parts or design elements.

Variants

Variant models

M151A1C with 106 mm recoilless rifle

M718 Ambulance variant

TOW missilebeing fired from M151A2

Ford M-825 (1971)

Rare hardtop model forUnited States Air Force Security Police

M151(1960) – Original, standard version of theclean-sheet,Ford designed, all new jeep. Because of its simpleindependent rear suspension,it had a dangerous tendency to flip over when cornered too aggressively by unaware drivers. The cheapswing-axlerear suspension design (like that of the originalVW BeetleandChevrolet Corvair), would result in large rear-wheelcamber anglechanges, and could cause drasticoversteerand a subsequent roll-over.^[1]^[2]
M151A1(1964) – Second version: minor changes in the rear suspension, mostly aimed at allowing the vehicle to carry heavier loads. Addition of turn signals to front fenders. The essentials of the rear suspension remained unchanged and the same applies to the handling problems in corners.^[1]^[2]^[3]^[4]
- M151A1C– The M151A1C equipped with a 106 mm recoilless rifle on a pedestal-mount. Capable of carrying six rounds of ammunition and weapon tools. Including the driver, it provides space for two men and has a cruising range of 442 km or 275 miles.^[3]
- M151A1D– Tactical nuclear variant. This was an M151A1C modified to mount theDavy Crockett Atomic Warhead Launcher(in parallel development with a similarly equipped M38A1 and other tactical vehicles).
- M718– Front-line ambulance variant with an extended rear body to enable the transport of wounded patients on litters.^[3]Crewed by two — a driver and a medic, it could carry three litters.^[5]Notably, although the M718 is larger than an M151 in all three dimensions – its greater length, width and height resulted from only minimal changes to the standard M151 design — retaining both the samewheelbaseandtrack widthunchanged. The spare wheel was moved from the rear to the side, to allow the rear body extensions, but also resulting in the increase in width. The ambulance "body" of the M718 consisted mostly just of taller bows, and a longer, taller, canvas top. The changes to the body and chassis, compared to the base M151 were remarkably minimal, considering its predecessor, the M170 jeep ambulance, had received a full 20 in (51 cm) wheelbase stretch from the baseM38A1jeep.
M151A2(1968) – The A2 fielded a significantly revised rear suspension that greatly improved safety in fast cornering. The M151 now hadSemi-trailing arm suspension.Many smaller upgrades including improved turn signals. The A2 can be identified by the large combination turn signal/blackout lights on the front fenders, which also had been modified to mount the larger lights, as opposed to earlier A1's that had flat front fenders.^[1]^[2]^[4]
- M151A2 TOW– tube-launched, optically tracked, wire-guided (TOW) anti-tank missile variant.^[6]
- M718A1– Front-line ambulance variant that featured an extended rear body to allow the transport of litters.^[6]
- M825– Variant with M40 106 mm recoilless rifle mounted on rear. It had racks in the cargo bed to carry 4 shells.^[6]
- M1051– Firefighting variant which saw exclusive use by the Marine Corps.
- MRC108– Forward Air Control variant, with multi-band communications equipment.
Fast Attack Vehicles
- M151A2 FAV– Fast Assault Vehicle variant designed to be carried inside aCH-53 helicopter.Modification mainly involves adding a combination radiator grille armor plate and spare tire carrier, a field radio bracket between the front seats, roll bars or roll-cage, and high-beam lights. It has a heavy weapons pedestal mount post mounted on the rear deck (capable of carrying aBrowning M2HB,Mark 19 Automatic Grenade LauncherorTOW II Missile). The rear bustles had brackets to mount large storage baskets and the front bustles had brackets to mount small storage baskets for fuel jerry cans or single ammo boxes.
- Marine FAV Mk I "Super Jeep":Fast Attack Vehicle. Models originally had a flat black paint job and a velcro-fastened cloth "blackout panel" that covered the dashboard gauges. The front-mounted roll bar, which replaced the front folding windshield, was made from threaded heavy-gauge pipe.
- Marine FAV Mk II:Fast Attack Vehicle. Models originally had a MERDC "woodland" camouflage paint job and a welded roll-bar that was reinforced with two angled support braces of heavy-gauge welded pipe between the front seats. Had two high-beam lights mounted under the top of the rollbar. Highly customized by the units converting it, leading to numerous unique modifications.
- AirborneFAV (AKA Ranger FAV):Fast Attack Vehicle. Has a forward-facingM60 GPMGorM240 MAG GPMGin a M32 45° weapons mount welded to the dashboard on the front passenger side, a horizontal storage box containing anAT-4 Anti-Tank Rocket,and a vertical storage rack behind the front seats that holds 8 to 10M72 LAWRockets. The rear bustles can mount locker baskets that can each contain 4 × M2/M2A1 ammo boxes for the main gun and the front bustles can contain single ammo boxes for the M60.
- Air Force FAV:Has a roll cage and a 360° ring mount over the rear seat. This model was designed by Marine Sgt. David Ferry^[7]and saw service with theMEUsand other Special Operations units.
  It got the nickname of "Air Force FAV" from a famous picture of U.S. Air Force Maj. Gen.William S. Hinton Jr.,commander ofJoint Task Force Shining Hope,getting out of one.