Microtechnologyistechnologywhose features have dimensions of the order of onemicrometre(one millionth of a metre, or 10−6metre, or 1μm).[1]It focuses on physical and chemical processes as well as the production or manipulation of structures with one-micrometre magnitude.[2]
Development
editAround 1970, scientists learned that by arraying large numbers ofmicroscopictransistorson a single chip, microelectronic circuits could be built that dramatically improved performance, functionality, and reliability, all while reducing cost and increasing volume. This development led to theInformation Revolution.
More recently, scientists have learned that not onlyelectricaldevices, but also mechanical devices, may beminiaturizedand batch-fabricated, promising the same benefits to the mechanical world asintegrated circuittechnology has given to the electrical world. While electronics now provide the ‘brains’ for today's advanced systems and products, micro-mechanical devices can provide thesensorsandactuators— the eyes and ears, hands and feet — which interface to the outside world.
Today, micromechanical devices are the key components in a wide range of products such as automobileairbags,ink-jet printers,blood pressure monitors,and projection display systems. It seems clear that in the not-too-distant future these devices will be as pervasive as electronics. The process has also become more precise, driving the dimensions of the technology down to sub-micrometer range as demonstrated in the case of advanced microelectric circuits that reached below 20 nm.[3]
Micro electromechanical systems
edit
The termMEMS,for Micro Electro Mechanical Systems, was coined in the 1980s to describe new, sophisticated mechanical systems on a chip, such as micro electric motors, resonators, gears, and so on. Today, the term MEMS in practice is used to refer to any microscopic device with a mechanical function, which can be fabricated in a batch process (for example, an array of microscopic gears fabricated on a microchip would be considered a MEMS device but a tiny laser-machined stent or watch component would not). In Europe, the term MST for Micro System Technology is preferred, and in Japan MEMS are simply referred to as "micromachines". The distinctions in these terms are relatively minor and are often used interchangeably.
Though MEMS processes are generally classified into a number of categories – such as surfacemachining,bulk machining,LIGA,andEFAB– there are indeed thousands of different MEMS processes. Some produce fairly simple geometries, while others offer more complex 3-D geometries and more versatility. A company makingaccelerometersforairbagswould need a completely different design and process to produce an accelerometer for inertial navigation. Changing from an accelerometer to another inertial device such as agyroscoperequires an even greater change in design and process, and most likely a completely differentfabricationfacility and engineering team.
MEMS technology has generated a tremendous amount of excitement, due to the vast range of important applications where MEMS can offer previously unattainable performance and reliability standards. In an age where everything must be smaller, faster, and cheaper, MEMS offers a compelling solution. MEMS have already had a profound impact on certain applications such as automotive sensors and inkjet printers. The emerging MEMS industry is already a multibillion-dollar market. It is expected to grow rapidly and become one of the major industries of the 21st century.Cahners In-Stat Grouphas projected sales of MEMS to reach $12B by 2005. The European NEXUS group projects even larger revenues, using a more inclusive definition of MEMS.
Microtechnology is often constructed usingphotolithography.Lightwaves are focused through a mask onto a surface. They solidify a chemical film. The soft, unexposed parts of the film are washed away. Thenacidetches away the material not protected.
Microtechnology's most famous success is theintegrated circuit.It has also been used to constructmicromachinery.As an offshoot of researchers attempting to further miniaturize microtechnology,nanotechnologyemerged in the 1980s, particularly after the invention of new microscopy techniques.[4]These produced materials and structures that have 1-100 nm in dimensions.[4]
Items constructed at the microscopic level
editThe following items have been constructed on a scale of 1 micrometre using photolithography:
See also
editReferences
edit- ^Darrin, M. Ann Garrison;Barth, Janet L.(2011).Systems Engineering for Microscale and Nanoscale Technologies.Boca Raton, FL: CRC Press. p. 7.ISBN9781439837320.
- ^Krar, Stephen F.; Gill, Arthur (2003).Exploring Advanced Manufacturing Technologies.Industrial Press Inc. pp. 11–3–1.ISBN0831131500.
- ^Köhler, Michael; Fritzsche, Wolfgang (2007).Nanotechnology: An Introduction to Nanostructuring Techniques.Weinheim: Wiley-VCH Verlag GmbH & Co. p. 33.ISBN9783527318711.
- ^abSmallman, R. E.; Ngan, A. H. W. (2007).Physical Metallurgy and Advanced Materials, Seventh Edition.Oxford, UK: Elsevier. p. 607.ISBN9780750669061.
External links
edit
