Spatial analysis

Spatial analysisis any of the formaltechniqueswhich studies entities using theirtopological,geometric,orgeographicproperties. Spatial analysis includes a variety of techniques using different analytic approaches, especiallyspatial statistics.It may be applied in fields as diverse asastronomy,with its studies of the placement of galaxies in thecosmos,or to chip fabrication engineering, with its use of "place and route"algorithmsto build complex wiring structures. In a more restricted sense, spatial analysis isgeospatial analysis,the technique applied to structures at the human scale, most notably in the analysis ofgeographic data.It may also be applied to genomics, as intranscriptomics data.

Map by Dr.John SnowofLondon,showingclustersof cholera cases in the1854 Broad Street cholera outbreak.This was one of the first uses of map-based spatial analysis.

Complex issues arise in spatial analysis, many of which are neither clearly defined nor completely resolved, but form the basis for current research. The most fundamental of these is the problem of defining the spatial location of the entities being studied. Classification of the techniques of spatial analysis is difficult because of the large number of different fields of research involved, the different fundamental approaches which can be chosen, and the many forms the data can take.

History

Spatial analysis began with early attempts atcartographyandsurveying.Land surveying goes back to at least 1,400 B.C in Egypt: the dimensions of taxable land plots were measured with measuring ropes and plumb bobs.Many fields have contributed to its rise in modern form.Biologycontributed throughbotanicalstudies of global plant distributions and local plant locations,ethologicalstudies of animal movement,landscape ecologicalstudies of vegetation blocks,ecologicalstudies of spatial population dynamics, and the study ofbiogeography.Epidemiologycontributed with early work on disease mapping, notablyJohn Snow's work of mapping an outbreak of cholera, with research on mapping the spread of disease and with location studies for health care delivery.Statisticshas contributed greatly through work in spatial statistics.Economicshas contributed notably throughspatial econometrics.Geographic information systemis currently a major contributor due to the importance of geographic software in the modern analytic toolbox.Remote sensinghas contributed extensively in morphometric and clustering analysis.Computer sciencehas contributed extensively through the study of algorithms, notably incomputational geometry.Mathematicscontinues to provide the fundamental tools for analysis and to reveal the complexity of the spatial realm, for example, with recent work onfractalsandscale invariance.Scientific modellingprovides a useful framework for new approaches.

Fundamental issues

Spatial analysis confronts many fundamental issues in the definition of its objects of study, in the construction of the analytic operations to be used, in the use of computers for analysis, in the limitations and particularities of the analyses which are known, and in the presentation of analytic results. Many of these issues are active subjects of modern research.

Common errors often arise in spatial analysis, some due to the mathematics of space, some due to the particular ways data are presented spatially, some due to the tools which are available. Census data, because it protects individual privacy by aggregating data into local units, raises a number of statistical issues. The fractal nature of coastline makes precise measurements of its length difficult if not impossible. A computer software fitting straight lines to the curve of a coastline, can easily calculate the lengths of the lines which it defines. However these straight lines may have no inherent meaning in the real world, as was shown for thecoastline of Britain.

These problems represent a challenge in spatial analysis because of the power of maps as media of presentation. When results are presented as maps, the presentation combines spatial data which are generally accurate with analytic results which may be inaccurate, leading to an impression that analytic results are more accurate than the data would indicate.

Formal Problems

Boundary problem

This section is an excerpt fromBoundary problem (spatial analysis).[edit]

Aboundary problemin analysis is a phenomenon in which geographical patterns are differentiated by the shape and arrangement of boundaries that are drawn for administrative or measurement purposes. The boundary problem occurs because of the loss of neighbors in analyses that depend on the values of the neighbors. While geographic phenomena are measured and analyzed within a specific unit, identical spatial data can appear either dispersed or clustered depending on the boundary placed around the data. In analysis with point data, dispersion is evaluated as dependent of the boundary. In analysis with areal data, statistics should be interpreted based upon the boundary.

Modifiable areal unit problem

This section is an excerpt fromModifiable areal unit problem.[edit]

An example of the modifiable areal unit problem and the distortion of rate calculations

Themodifiable areal unit problem(MAUP) is a source ofstatistical biasthat can significantly impact the results ofstatistical hypothesis tests.MAUP affects results when point-based measures of spatial phenomena areaggregatedinto spatial partitions orareal units(such asregionsordistricts) as in, for example,population densityorillness rates.The resulting summary values (e.g., totals, rates, proportions, densities) are influenced by both the shape andscaleof the aggregation unit.

For example, census data may be aggregated into county districts, census tracts, postcode areas, police precincts, or any other arbitrary spatial partition. Thus the results of data aggregation are dependent on the mapmaker's choice of which "modifiable areal unit" to use in their analysis. A censuschoropleth mapcalculating population density using state boundaries will yield radically different results than a map that calculates density based on county boundaries. Furthermore, census district boundaries are also subject to change over time,meaning the MAUP must be considered when comparing past data to current data.

Modifiable temporal unit problem

This section is an excerpt fromModifiable temporal unit problem.[edit]

Flowchart illustrating selected units of time. The graphic also shows the three celestial objects that are related to the units of time.

TheModified Temporal Unit Problem(MTUP) is a source ofstatistical biasthat occurs in time series and spatial analysis when using temporal data that has beenaggregatedintotemporal units.In such cases, choosing a temporal unit (e.g., days, months, years) can affect the analysis results and lead to inconsistencies or errors instatistical hypothesis testing.

Neighborhood effect averaging problem

This section is an excerpt fromNeighborhood effect averaging problem.[edit]

Theneighborhood effect averaging problemor NEAP delves into the challenges associated with understanding the influence of aggregating neighborhood-level phenomena on individuals when mobility-dependent exposures influence the phenomena.The problem confounds theneighbourhood effect,which suggests that a person's neighborhood impacts their individual characteristics, such as health.It relates to theboundary problem,in that delineated neighborhoods used for analysis may not fully account for an individual's activity space if the borders are permeable, and individual mobility crosses the boundaries. The term was first coined byMei-Po Kwanin the peer-reviewed journal "International Journal of Environmental Research and Public Health" in 2018.

Travelling salesman problem

This section is an excerpt fromTravelling salesman problem.[edit]

Solution of a travelling salesman problem: the black line shows the shortest possible loop that connects every red dot.

In thetheory of computational complexity,thetravelling salesman problem(TSP) asks the following question: "Given a list of cities and the distances between each pair of cities, what is the shortest possible route that visits each city exactly once and returns to the origin city?" It is anNP-hardproblem incombinatorial optimization,important intheoretical computer scienceandoperations research.

Thetravelling purchaser problem,thevehicle routing problemand thering star problemare three generalizations of TSP.

The decision version of the TSP (where given a lengthL,the task is to decide whether the graph has a tour whose length is at mostL) belongs to the class ofNP-completeproblems. Thus, it is possible that theworst-caserunning timefor any algorithm for the TSP increasessuperpolynomially(but no more thanexponentially) with the number of cities.

The problem was first formulated in 1930 and is one of the most intensively studied problems in optimization. It is used as abenchmarkfor many optimization methods. Even though the problem is computationally difficult, manyheuristicsandexact algorithmsare known, so that some instances with tens of thousands of cities can be solved completely, and even problems with millions of cities can be approximated within a small fraction of 1%.

Uncertain geographic context problem

This section is an excerpt fromUncertain geographic context problem.[edit]

Theuncertain geographic context problemor UGCoP is a source ofstatistical biasthat can significantly impact the results of spatial analysis when dealing with aggregate data.The UGCoP is very closely related to theModifiable areal unit problem(MAUP), and like the MAUP, arises from how we divide the land into areal units.It is caused by the difficulty, or impossibility, of understanding how phenomena under investigation (such as people within a census tract) in different enumeration units interact between enumeration units, and outside of a study area over time.It is particularly important to consider the UGCoP within the discipline oftime geography,where phenomena under investigation can move between spatial enumeration units during the study period.Examples of research that needs to consider the UGCoP include food access and human mobility.

Schematic and example of aspace-time prismusing transit network data: On the right is aschematicdiagram of a space-time prism, and on the left is a map of the potential path area for two different time budgets.

The uncertain geographic context problem, or UGCoP, was first coined by Dr.Mei-Po Kwanin 2012.The problem is highly related to theecological fallacy,edge effect, andModifiable areal unit problem(MAUP) in that, it relates to aggregate units as they apply to individuals.The crux of the problem is that the boundaries we use for aggregation are arbitrary and may not represent the actual neighborhood of the individuals within them.While a particular enumeration unit, such as acensus tract,contains a person's location, they may cross its boundaries to work, go to school, and shop in completely different areas.Thus, the geographic phenomena under investigation extends beyond the delineated boundary.Different individuals, or groups may have completely differentactivity spaces,making an enumeration unit that is relevant for one person meaningless to another.For example, a map that aggregates people by school districts will be more meaningful when studying a population of students than the general population.Traditional spatial analysis, by necessity, treats each discrete areal unit as a self-contained neighborhood and does not consider the daily activity of crossing the boundaries.

Weber problem

This section is an excerpt fromWeber problem.[edit]

Ingeometry,theWeber problem,named afterAlfred Weber,is one of the most famous problems inlocation theory.It requires finding a point in the plane that minimizes the sum of the transportation costs from this point tondestination points, where different destination points are associated with different costs per unit distance.

The Weber problem generalizes thegeometric median,which assumes transportation costs per unit distance are the same for all destination points, and the problem of computing theFermat point,the geometric median of three points. For this reason it is sometimes called the Fermat–Weber problem, although the same name has also been used for the unweighted geometric median problem. The Weber problem is in turn generalized by theattraction–repulsion problem,which allows some of the costs to be negative, so that greater distance from some points is better.

Spatial characterization

Spread of bubonic plague in medieval Europe.The colors indicate the spatial distribution of plague outbreaks over time.

The definition of the spatial presence of an entity constrains the possible analysis which can be applied to that entity and influences the final conclusions that can be reached. While this property is fundamentally true of allanalysis,it is particularly important in spatial analysis because the tools to define and study entities favor specific characterizations of the entities being studied. Statistical techniques favor the spatial definition of objects as points because there are very few statistical techniques which operate directly on line, area, or volume elements. Computer tools favor the spatial definition of objects as homogeneous and separate elements because of the limited number ofdatabaseelements and computational structures available, and the ease with which these primitive structures can be created.

Spatial dependence

Spatial dependenceis the spatial relationship of variable values (for themes defined over space, such asrainfall) or locations (for themes defined as objects, such as cities). Spatial dependence is measured as the existence ofstatistical dependencein a collection ofrandom variables,each of which is associated with a differentgeographical location.Spatial dependence is of importance in applications where it is reasonable to postulate the existence of corresponding set of random variables at locations that have not been included in a sample. Thusrainfallmay be measured at a set of rain gauge locations, and such measurements can be considered as outcomes of random variables, but rainfall clearly occurs at other locations and would again be random. Becauserainfallexhibits properties ofautocorrelation,spatial interpolation techniques can be used to estimaterainfallamounts at locations near measured locations.

As with other types of statistical dependence, the presence of spatial dependence generally leads to estimates of an average value from a sample being less accurate than had the samples been independent, although if negative dependence exists a sample average can be better than in the independent case. A different problem than that of estimating an overall average is that ofspatial interpolation:here the problem is to estimate the unobserved random outcomes of variables at locations intermediate to places where measurements are made, on that there is spatial dependence between the observed and unobserved random variables.

Tools for exploring spatial dependence include:spatial correlation,spatial covariance functionsandsemivariograms. Methods for spatial interpolation includeKriging,which is a type ofbest linear unbiased prediction. The topic of spatial dependence is of importance togeostatisticsand spatial analysis.

Spatial auto-correlation

Spatial dependency is the co-variation of properties within geographic space: characteristics at proximal locations appear to be correlated, either positively or negatively.Spatial dependency leads to thespatialautocorrelationproblem in statistics since, like temporal autocorrelation, this violates standard statistical techniques that assume independence among observations. For example,regressionanalyses that do not compensate for spatial dependency can have unstable parameter estimates and yield unreliable significance tests. Spatial regression models (see below) capture these relationships and do not suffer from these weaknesses. It is also appropriate to view spatial dependency as a source of information rather than something to be corrected.

Locational effects also manifest as spatialheterogeneity,or the apparent variation in a process with respect to location in geographic space. Unless a space is uniform and boundless, every location will have some degree of uniqueness relative to the other locations. This affects the spatial dependency relations and therefore the spatial process. Spatial heterogeneity means that overall parameters estimated for the entire system may not adequately describe the process at any given location.

Spatial association

Further information:Indicators of spatial association

Spatial associationis the degree to which things are similarly arranged in space. Analysis of the distribution patterns of two phenomena is done by map overlay. If the distributions are similar, then the spatial association is strong, and vice versa.In aGeographic Information System,the analysis can be done quantitatively. For example, a set of observations (as points or extracted from raster cells) at matching locations can be intersected and examined byregression analysis.

Likespatial autocorrelation,this can be a useful tool for spatial prediction. In spatial modeling, the concept of spatial association allows the use of covariates in a regression equation to predict the geographic field and thus produce a map.

The second dimension of spatial association

The second dimension of spatial association (SDA) reveals the association between spatial variables through extracting geographical information at locations outside samples. SDA effectively uses the missing geographical information outside sample locations in methods of the first dimension of spatial association (FDA), which explore spatial association using observations at sample locations.

Scaling

Spatialmeasurementscale is a persistent issue in spatial analysis; more detail is available at themodifiable areal unit problem(MAUP) topic entry. Landscape ecologists developed a series ofscale invariantmetrics for aspects of ecology that arefractalin nature.In more general terms, no scale independent method ofanalysisis widely agreed upon for spatial statistics.

Sampling

Spatialsamplinginvolves determining a limited number of locations in geographic space for faithfully measuring phenomena that are subject to dependency and heterogeneity.Dependency suggests that since one location can predict the value of another location, we do not need observations in both places. But heterogeneity suggests that this relation can change across space, and therefore we cannot trust an observed degree of dependency beyond a region that may be small. Basic spatial sampling schemes include random, clustered and systematic. These basic schemes can be applied at multiple levels in a designated spatial hierarchy (e.g., urban area, city, neighborhood). It is also possible to exploit ancillary data, for example, using property values as a guide in a spatial sampling scheme to measure educational attainment and income. Spatial models such as autocorrelation statistics, regression and interpolation (see below) can also dictate sample design.

Common errors in spatial analysis

The fundamental issues in spatial analysis lead to numerous problems in analysis including bias, distortion and outright errors in the conclusions reached. These issues are often interlinked but various attempts have been made to separate out particular issues from each other.

Length

In discussing thecoastline of Britain,Benoit Mandelbrotshowed that certain spatial concepts are inherently nonsensical despite presumption of their validity. Lengths in ecology depend directly on the scale at which they are measured and experienced. So while surveyors commonly measure the length of a river, this length only has meaning in the context of the relevance of the measuring technique to the question under study.

• 
  Britain measured using a 200 km linear measurement
• 
  Britain measured using a 100 km linear measurement
• 
  Britain measured using a 50 km linear measurement

Locational fallacy

The locational fallacy refers to error due to the particular spatial characterization chosen for the elements of study, in particular choice of placement for the spatial presence of the element.

Spatial characterizations may be simplistic or even wrong. Studies of humans often reduce the spatial existence of humans to a single point, for instance their home address. This can easily lead to poor analysis, for example, when considering disease transmission which can happen at work or at school and therefore far from the home.

The spatial characterization may implicitly limit the subject of study. For example, the spatial analysis of crime data has recently become popular but these studies can only describe the particular kinds of crime which can be described spatially. This leads to many maps of assault but not to any maps of embezzlement with political consequences in the conceptualization of crime and the design of policies to address the issue.

Atomic fallacy

This describes errors due to treating elements as separate 'atoms' outside of their spatial context.The fallacy is about transferring individual conclusions to spatial units.

Ecological fallacy

Theecological fallacydescribes errors due to performing analyses on aggregate data when trying to reach conclusions on the individual units.Errors occur in part from spatial aggregation. For example, apixelrepresents the average surface temperatures within an area. Ecological fallacy would be to assume that all points within the area have the same temperature.

Solutions to the fundamental issues

Geographic space

Manhattan distance versus Euclidean distance: The red, blue, and yellow lines have the same length (12) in both Euclidean and taxicab geometry. In Euclidean geometry, the green line has length 6×√2≈ 8.48, and is the unique shortest path. In taxicab geometry, the green line's length is still 12, making it no shorter than any other path shown.

A mathematical space exists whenever we have a set of observations and quantitative measures of their attributes. For example, we can represent individuals' incomes or years of education within a coordinate system where the location of each individual can be specified with respect to both dimensions. The distance between individuals within this space is a quantitative measure of their differences with respect to income and education. However, in spatial analysis, we are concerned with specific types of mathematical spaces, namely, geographic space. In geographic space, the observations correspond to locations in a spatial measurement framework that capture their proximity in the real world. The locations in a spatial measurement framework often represent locations on the surface of the Earth, but this is not strictly necessary. A spatial measurement framework can also capture proximity with respect to, say, interstellar space or within a biological entity such as a liver. The fundamental tenet isTobler's First Law of Geography:if the interrelation between entities increases with proximity in the real world, then representation in geographic space and assessment using spatial analysis techniques are appropriate.

TheEuclidean distancebetween locations often represents their proximity, although this is only one possibility. There are an infinite number of distances in addition to Euclidean that can support quantitative analysis. For example, "Manhattan" (or "Taxicab") distances where movement is restricted to paths parallel to the axes can be more meaningful than Euclidean distances in urban settings. In addition to distances, other geographic relationships such as connectivity(e.g., the existence or degree of shared borders) and directioncan also influence the relationships among entities. It is also possible to compute minimal cost paths across a cost surface; for example, this can represent proximity among locations when travel must occur across rugged terrain.

Types

Spatial data comes in many varieties and it is not easy to arrive at a system of classification that is simultaneously exclusive, exhaustive, imaginative, and satisfying. -- G. Upton & B. Fingelton

Spatial data analysis

Urban and Regional Studies deal with large tables of spatial data obtained from censuses and surveys. It is necessary to simplify the huge amount of detailed information in order to extract the main trends. Multivariable analysis (orFactor analysis,FA) allows a change of variables, transforming the many variables of the census, usually correlated between themselves, into fewer independent "Factors" or "Principal Components" which are, actually, theeigenvectorsof the data correlation matrix weighted by the inverse of their eigenvalues. This change of variables has two main advantages:

1. Since information is concentrated on the first new factors, it is possible to keep only a few of them while losing only a small amount of information; mapping them produces fewer and more significant maps
2. The factors, actually the eigenvectors, are orthogonal by construction, i.e. not correlated. In most cases, the dominant factor (with the largest eigenvalue) is the Social Component, separating rich and poor in the city. Since factors are not-correlated, other smaller processes than social status, which would have remained hidden otherwise, appear on the second, third,... factors.

Factor analysis depends on measuring distances between observations: the choice of a significant metric is crucial. The Euclidean metric (Principal Component Analysis), the Chi-Square distance (Correspondence Analysis) or the Generalized Mahalanobis distance (Discriminant Analysis) are among the more widely used.More complicated models, using communalities or rotations have been proposed.

Using multivariate methods in spatial analysis began really in the 1950s (although some examples go back to the beginning of the century) and culminated in the 1970s, with the increasing power and accessibility of computers. Already in 1948, in a seminal publication, two sociologists,Wendell Belland Eshref Shevky,had shown that most city populations in the US and in the world could be represented with three independent factors: 1- the « socio-economic status » opposing rich and poor districts and distributed in sectors running along highways from the city center, 2- the « life cycle », i.e. the age structure of households, distributed in concentric circles, and 3- « race and ethnicity », identifying patches of migrants located within the city. In 1961, in a groundbreaking study, British geographers used FA to classify British towns.Brian J Berry, at the University of Chicago, and his students made a wide use of the method,applying it to most important cities in the world and exhibiting common social structures. The use of Factor Analysis in Geography, made so easy by modern computers, has been very wide but not always very wise.

Since the vectors extracted are determined by the data matrix, it is not possible to compare factors obtained from different censuses. A solution consists in fusing together several census matrices in a unique table which, then, may be analyzed. This, however, assumes that the definition of the variables has not changed over time and produces very large tables, difficult to manage. A better solution, proposed by psychometricians,groups the data in a « cubic matrix », with three entries (for instance, locations, variables, time periods). A Three-Way Factor Analysis produces then three groups of factors related by a small cubic « core matrix ».This method, which exhibits data evolution over time, has not been widely used in geography.In Los Angeles,however, it has exhibited the role, traditionally ignored, of Downtown as an organizing center for the whole city during several decades.

Spatial autocorrelation

Further information:Tobler's first law of geography

Spatialautocorrelationstatistics measure and analyze the degree of dependency among observations in a geographic space. Classic spatial autocorrelation statistics includeMoran's$I$,Geary's$C$,Getis's$G$and thestandard deviational ellipse.These statistics require measuring aspatial weights matrixthat reflects the intensity of the geographic relationship between observations in a neighborhood, e.g., the distances between neighbors, the lengths of shared border, or whether they fall into a specified directional class such as "west". Classic spatial autocorrelation statistics compare the spatial weights to the covariance relationship at pairs of locations. Spatial autocorrelation that is more positive than expected from random indicate the clustering of similar values across geographic space, while significant negative spatial autocorrelation indicates that neighboring values are more dissimilar than expected by chance, suggesting a spatial pattern similar to a chess board.

Spatial autocorrelation statistics such as Moran's$I$and Geary's$C$are global in the sense that they estimate the overall degree of spatial autocorrelation for a dataset. The possibility of spatial heterogeneity suggests that the estimated degree of autocorrelation may vary significantly across geographic space.Local spatial autocorrelation statisticsprovide estimates disaggregated to the level of the spatial analysis units, allowing assessment of the dependency relationships across space.$G$statistics compare neighborhoods to a global average and identify local regions of strong autocorrelation. Local versions of the$I$and$C$statistics are also available.

Spatial heterogeneity

This section is an excerpt fromSpatial heterogeneity.[edit]

Land cover surrounding Madison, WI. Fields are colored yellow and brown, water is colored blue, and urban surfaces are colored red.

Spatial heterogeneityis a property generally ascribed to alandscapeor to apopulation.It refers to the uneven distribution of various concentrations of eachspecieswithin an area. A landscape with spatial heterogeneity has a mix of concentrations of multiple species of plants or animals (biological), or ofterrainformations (geological), or environmental characteristics (e.g. rainfall, temperature, wind) filling its area. A population showing spatial heterogeneity is one where various concentrations of individuals of this species are unevenly distributed across an area; nearly synonymous with "patchily distributed."

Spatial interaction

Spatial interaction or "gravity models"estimate the flow of people, material or information between locations in geographic space. Factors can include origin propulsive variables such as the number of commuters in residential areas, destination attractiveness variables such as the amount of office space in employment areas, and proximity relationships between the locations measured in terms such as driving distance or travel time. In addition, the topological, orconnective,relationships between areas must be identified, particularly considering the often conflicting relationship between distance and topology; for example, two spatially close neighborhoods may not display any significant interaction if they are separated by a highway. After specifying the functional forms of these relationships, the analyst can estimate model parameters using observed flow data and standard estimation techniques such as ordinary least squares or maximum likelihood. Competing destinations versions of spatial interaction models include the proximity among the destinations (or origins) in addition to the origin-destination proximity; this captures the effects of destination (origin) clustering on flows.

Spatial interpolation

Spatial interpolationmethods estimate the variables at unobserved locations in geographic space based on the values at observed locations. Basic methods includeinverse distance weighting:this attenuates the variable with decreasing proximity from the observed location.Krigingis a more sophisticated method that interpolates across space according to a spatial lag relationship that has both systematic and random components. This can accommodate a wide range of spatial relationships for the hidden values between observed locations. Kriging provides optimal estimates given the hypothesized lag relationship, and error estimates can be mapped to determine if spatial patterns exist.

Spatial regression

See also:Local regressionandRegression-Kriging

Spatial regression methods capture spatial dependency inregression analysis,avoiding statistical problems such as unstable parameters and unreliable significance tests, as well as providing information on spatial relationships among the variables involved. Depending on the specific technique, spatial dependency can enter the regression model as relationships between the independent variables and the dependent, between the dependent variables and a spatial lag of itself, or in the error terms.Geographically weighted regression(GWR) is a local version of spatial regression that generates parameters disaggregated by the spatial units of analysis.This allows assessment of the spatial heterogeneity in the estimated relationships between the independent and dependent variables. The use ofBayesian hierarchical modelingin conjunction withMarkov chain Monte Carlo(MCMC) methods have recently shown to be effective in modeling complex relationships using Poisson-Gamma-CAR, Poisson-lognormal-SAR, or Overdispersed logit models. Statistical packages for implementing such Bayesian models using MCMC includeWinBugs,CrimeStatand many packages available viaR programming language.

Spatial stochastic processes, such asGaussian processesare also increasingly being deployed in spatial regression analysis. Model-based versions of GWR, known as spatially varying coefficient models have been applied to conduct Bayesian inference.Spatial stochastic process can become computationally effective and scalable Gaussian process models, such as Gaussian Predictive Processesand Nearest Neighbor Gaussian Processes (NNGP).

Spatial neural networks

This section is an excerpt fromSpatial neural network.[edit]

Spatial neural networks (SNNs) constitute a supercategory of tailoredneural networks (NNs)for representing and predicting geographic phenomena. They generally improve both the statisticalaccuracyandreliabilityof the a-spatial/classic NNs whenever they handlegeo-spatial datasets,and also of the other spatial(statistical) models(e.g. spatial regression models) whenever the geo-spatialdatasets' variables depictnon-linear relations.Examples of SNNs are the OSFA spatial neural networks, SVANNs and GWNNs.

Simulation and modeling

Spatial interaction models are aggregate and top-down: they specify an overall governing relationship for flow between locations. This characteristic is also shared by urban models such as those based on mathematical programming, flows among economic sectors, or bid-rent theory. An alternative modeling perspective is to represent the system at the highest possible level of disaggregation and study the bottom-up emergence of complex patterns and relationships from behavior and interactions at the individual level.

Complex adaptive systemstheory as applied to spatial analysis suggests that simple interactions among proximal entities can lead to intricate, persistent and functional spatial entities at aggregate levels. Two fundamentally spatial simulation methods are cellular automata and agent-based modeling.Cellular automatamodeling imposes a fixed spatial framework such as grid cells and specifies rules that dictate the state of a cell based on the states of its neighboring cells. As time progresses, spatial patterns emerge as cells change states based on their neighbors; this alters the conditions for future time periods. For example, cells can represent locations in an urban area and their states can be different types of land use. Patterns that can emerge from the simple interactions of local land uses include office districts andurban sprawl.Agent-based modelinguses software entities (agents) that have purposeful behavior (goals) and can react, interact and modify their environment while seeking their objectives. Unlike the cells in cellular automata, simulysts can allow agents to be mobile with respect to space. For example, one could model traffic flow and dynamics using agents representing individual vehicles that try to minimize travel time between specified origins and destinations. While pursuing minimal travel times, the agents must avoid collisions with other vehicles also seeking to minimize their travel times. Cellular automata and agent-based modeling are complementary modeling strategies. They can be integrated into a common geographic automata system where some agents are fixed while others are mobile.

Calibration plays a pivotal role in both CA and ABM simulation and modelling approaches. Initial approaches to CA proposed robust calibration approaches based on stochastic, Monte Carlo methods.ABM approaches rely on agents' decision rules (in many cases extracted from qualitative research base methods such as questionnaires).Recent Machine Learning Algorithms calibrate using training sets, for instance in order to understand the qualities of the built environment.

Multiple-point geostatistics (MPS)

Spatial analysis of a conceptual geological model is the main purpose of any MPS algorithm. The method analyzes the spatial statistics of the geological model, called the training image, and generates realizations of the phenomena that honor those input multiple-point statistics.

A recent MPS algorithm used to accomplish this task is the pattern-based method by Honarkhah.In this method, a distance-based approach is employed to analyze the patterns in the training image. This allows the reproduction of the multiple-point statistics, and the complex geometrical features of the training image. Each output of the MPS algorithm is a realization that represents a random field. Together, several realizations may be used to quantify spatial uncertainty.

One of the recent methods is presented by Tahmasebi et al.uses a cross-correlation function to improve the spatial pattern reproduction. They call their MPS simulation method as the CCSIM algorithm. This method is able to quantify the spatial connectivity, variability and uncertainty. Furthermore, the method is not sensitive to any type of data and is able to simulate both categorical and continuous scenarios. CCSIM algorithm is able to be used for any stationary, non-stationary and multivariate systems and it can provide high quality visual appeal model.,

Geospatial and hydrospatial analysis

Geospatial and hydrospatial analysis,or justspatial analysis,is an approach to applyingstatistical analysisand other analytic techniques to data which has a geographical or spatial aspect. Such analysis would typically employ software capable of rendering maps processing spatial data, and applyinganalyticalmethods to terrestrial orgeographicdatasets, including the use ofgeographic information systemsandgeomatics.

Geographical information system usage

Geographic information systems(GIS) — a large domain that provides a variety of capabilities designed to capture, store, manipulate, analyze, manage, and present all types of geographical data — utilizes geospatial and hydrospatial analysis in a variety of contexts, operations and applications.

Basic applications

Geospatial and Hydrospatial analysis, usingGIS,was developed for problems in the environmental and life sciences, in particularecology,geologyandepidemiology.It has extended to almost all industries including defense, intelligence, utilities, Natural Resources (i.e. Oil and Gas, Forestry... etc.), social sciences, medicine andPublic Safety(i.e. emergency management and criminology), disaster risk reduction and management (DRRM), andclimate change adaptation(CCA). Spatial statistics typically result primarily from observation rather than experimentation. Hydrospatial is particularly used for the aquatic side and the members related to the water surface, column, bottom, sub-bottom and the coastal zones.

Basic operations

Vector-basedGISis typically related to operations such as map overlay (combining two or more maps or map layers according to predefined rules), simple buffering (identifying regions of a map within a specified distance of one or more features, such as towns, roads or rivers) and similar basic operations. This reflects (and is reflected in) the use of the term spatial analysis within the Open Geospatial Consortium (OGC) “simple feature specifications”. For raster-based GIS, widely used in the environmental sciences and remote sensing, this typically means a range of actions applied to the grid cells of one or more maps (or images) often involving filtering and/or algebraic operations (map algebra). These techniques involve processing one or more raster layers according to simple rules resulting in a new map layer, for example replacing each cell value with some combination of its neighbours’ values, or computing the sum or difference of specific attribute values for each grid cell in two matching raster datasets. Descriptive statistics, such as cell counts, means, variances, maxima, minima, cumulative values, frequencies and a number of other measures and distance computations are also often included in this generic term spatial analysis. Spatial analysis includes a large variety of statistical techniques (descriptive,exploratory,and explanatorystatistics) that apply to data that vary spatially and which can vary over time. Some more advanced statistical techniques include Getis-ord Gi* or Anselin Local Moran's I which are used to determine clustering patterns of spatially referenced data.

Advanced operations

Geospatial and Hydrospatial analysis goes beyond 2D and 3D mapping operations and spatial statistics. It is multi-dimensional and also temporal and includes:

• Surface analysis — in particular analysing the properties of physical surfaces, such asgradient,aspectandvisibility,and analysing surface-like data “fields”;
• Network analysis — examining the properties of natural and man-made networks in order to understand the behaviour of flows within and around such networks; and locational analysis. GIS-based network analysis may be used to address a wide range of practical problems such as route selection and facility location (core topics in the field ofoperations research), and problems involving flows such as those found in Hydrospatial andhydrologyand transportation research. In many instances location problems relate to networks and as such are addressed with tools designed for this purpose, but in others existing networks may have little or no relevance or may be impractical to incorporate within the modeling process. Problems that are not specifically network constrained, such as new road or pipeline routing, regional warehouse location, mobile phone mast positioning or the selection of rural community health care sites, may be effectively analysed (at least initially) without reference to existing physical networks. Locational analysis "in the plane" is also applicable where suitable network datasets are not available, or are too large or expensive to be utilised, or where the location algorithm is very complex or involves the examination or simulation of a very large number of alternative configurations.
• Geovisualization— the creation and manipulation of images, maps, diagrams, charts, 3D views and their associated tabular datasets. GIS packages increasingly provide a range of such tools, providing static or rotating views, draping images over 2.5D surface representations, providing animations and fly-throughs, dynamic linking and brushing and spatio-temporal visualisations. This latter class of tools is the least developed, reflecting in part the limited range of suitable compatible datasets and the limited set of analytical methods available, although this picture is changing rapidly. All these facilities augment the core tools utilised in spatial analysis throughout the analytical process (exploration of data, identification of patterns and relationships, construction of models, and communication of results)

Mobile geospatial and hydrospatial Computing

Traditionally geospatial and hydrospatial computing has been performed primarily on personal computers (PCs) or servers. Due to the increasing capabilities of mobile devices, however, geospatial computing in mobile devices is a fast-growing trend.The portable nature of these devices, as well as the presence of useful sensors, such as Global Navigation Satellite System (GNSS) receivers and barometric pressure sensors, make them useful for capturing and processing geospatial and hydrospatial information in the field. In addition to the local processing of geospatial information on mobile devices, another growing trend is cloud-based geospatial computing. In this architecture, data can be collected in the field using mobile devices and then transmitted to cloud-based servers for further processing and ultimate storage. In a similar manner, geospatial and hydrospatial information can be made available to connected mobile devices via the cloud, allowing access to vast databases of geospatial and hydrospatial information anywhere where a wireless data connection is available.

Geographic information science and spatial analysis

Further information:Geographic information systems § Spatial analysis

This flow map of Napoleon's ill-fated march on Moscow is an early and celebrated example of geovisualization. It shows the army's direction as it traveled, the places the troops passed through, the size of the army as troops died from hunger and wounds, and the freezing temperatures they experienced.

Geographic information systems(GIS) and the underlyinggeographic information sciencethat advances these technologies have a strong influence on spatial analysis. The increasing ability to capture and handle geographic data means that spatial analysis is occurring within increasingly data-rich environments. Geographic data capture systems include remotely sensed imagery,environmental monitoringsystems such as intelligent transportation systems, and location-aware technologies such as mobile devices that can report location in near-real time. GIS provide platforms for managing these data, computing spatial relationships such as distance, connectivity and directional relationships between spatial units, and visualizing both the raw data and spatial analytic results within a cartographic context. Subtypes include:

• Geovisualization(GVis) combines scientific visualization withdigital cartographyto support the exploration and analysis of geographic data and information, including the results of spatial analysis or simulation. GVis leverages the human orientation towards visual information processing in the exploration, analysis and communication of geographic data and information. In contrast with traditional cartography, GVis is typically three- or four-dimensional (the latter including time) and user-interactive.
• Geographic knowledge discovery(GKD) is the human-centered process of applying efficient computational tools for exploring massivespatial databases.GKD includes geographicdata mining,but also encompasses related activities such as data selection, data cleaning and pre-processing, and interpretation of results. GVis can also serve a central role in the GKD process. GKD is based on the premise that massive databases contain interesting (valid, novel, useful and understandable) patterns that standard analytical techniques cannot find. GKD can serve as a hypothesis-generating process for spatial analysis, producing tentative patterns and relationships that should be confirmed using spatial analytical techniques.
• Spatial decision support systems(SDSS) take existing spatial data and use a variety of mathematical models to make projections into the future. This allows urban and regional planners to test intervention decisions prior to implementation.

See also

General topics

• Buffer analysis
• Cartography
• Complete spatial randomness
• Concepts and Techniques in Modern Geography
• Cost distance analysis
• Four traditions of geography
• GeoComputation
• Geospatial intelligence
• Geospatial predictive modeling
• Dimensionally Extended nine-Intersection Model(DE-9IM)
• Geographic information science
• Mathematical statistics
• Modifiable areal unit problem
• Modifiable temporal unit problem
• Neighborhood effect averaging problem
• Point process
• Proximity analysis
• Spatial descriptive statistics
• Spatial relation
• Technical geography
• Terrain analysis
• Tobler's first law of geography
• Tobler's second law of geography
• List of spatial analysis software

Specific applications

• Boundary problem (in spatial analysis)
• Extrapolation domain analysis
• Fuzzy architectural spatial analysis
• Geodemographic segmentation
• Geographic information systems
• Geoinformatics
• Geostatistics
• Permeability (spatial and transport planning)
• Spatial econometrics
• Spatial epidemiology
• Suitability analysis
• Viewshed analysis

Further reading

• Abler, R., J. Adams, and P. Gould (1971)Spatial Organization–The Geographer's View of the World,Englewood Cliffs, NJ: Prentice-Hall.
• Anselin, L. (1995) "Local indicators of spatial association – LISA".Geographical Analysis,27, 93–115.
• Awange, Joseph; Paláncz, Béla (2016).Geospatial Algebraic Computations, Theory and Applications, Third Edition.New York: Springer.ISBN978-3319254630.
• Banerjee, Sudipto; Carlin, Bradley P.; Gelfand, Alan E. (2014),Hierarchical Modeling and Analysis for Spatial Data, Second Edition,Monographs on Statistics and Applied Probability (2nd ed.), Chapman and Hall/CRC,ISBN9781439819173
• Benenson, I. and P. M. Torrens. (2004).Geosimulation: Automata-Based Modeling of Urban Phenomena.Wiley.
• Fotheringham, A. S., C. Brunsdon and M. Charlton (2000)Quantitative Geography: Perspectives on Spatial Data Analysis,Sage.
• Fotheringham, A. S. and M. E. O'Kelly (1989)Spatial Interaction Models: Formulations and Applications,Kluwer Academic
• Fotheringham, A. S.; Rogerson, P. A. (1993). "GIS and spatial analytical problems".International Journal of Geographical Information Systems.7:3–19.doi:10.1080/02693799308901936.
• Goodchild, M. F. (1987). "A spatial analytical perspective on geographical information systems".International Journal of Geographical Information Systems.1(4): 327–44.doi:10.1080/02693798708927820.
• MacEachren, A. M.and D. R. F. Taylor (eds.) (1994)Visualization in Modern Cartography,Pergamon.
• Levine, N. (2010).CrimeStat: A Spatial Statistics Program for the Analysis of Crime Incident Locations.Version 3.3. Ned Levine & Associates, Houston, TX and the National Institute of Justice, Washington, DC. Ch. 1-17 + 2 update chapters
• Miller, H. J. (2004). "Tobler's First Law and spatial analysis".Annals of the Association of American Geographers.94(2): 284–289.doi:10.1111/j.1467-8306.2004.09402005.x.S2CID19172678.
• Miller, H. J. and J. Han (eds.) (2001)Geographic Data Mining and Knowledge Discovery,Taylor and Francis.
• O'Sullivan, D. and D. Unwin (2002)Geographic Information Analysis,Wiley.
• Parker, D. C.; Manson, S. M.;Janssen, M.A.;Hoffmann, M. J.; Deadman, P. (2003). "Multi-agent systems for the simulation of land-use and land-cover change: A review".Annals of the Association of American Geographers.93(2): 314–337.CiteSeerX10.1.1.109.1825.doi:10.1111/1467-8306.9302004.S2CID130096094.
• White, R.; Engelen, G. (1997). "Cellular automata as the basis of integrated dynamic regional modelling".Environment and Planning B: Planning and Design.24(2): 235–246.Bibcode:1997EnPlB..24..235W.doi:10.1068/b240235.S2CID62516646.
• Scheldeman, X. & van Zonneveld, M. (2010).Training Manual on Spatial Analysis of Plant Diversity and Distribution.Bioversity International.
• Fisher MM, Leung Y (2001) Geocomputational Modelling: techniques and applications. Springer Verlag, Berlin
• Fotheringham, S; Clarke, G; Abrahart, B (1997). "Geocomputation and GIS".Transactions in GIS.2(3): 199–200.doi:10.1111/j.1467-9671.1997.tb00010.x.S2CID205576122.
• Openshaw S and Abrahart RJ (2000) GeoComputation. CRC Press
• Diappi Lidia (2004) Evolving Cities: Geocomputation in Territorial Planning. Ashgate, England
• Longley PA, Brooks SM, McDonnell R, Macmillan B (1998), Geocomputation, a primer. John Wiley and Sons, Chichester
• Ehlen, J; Caldwell, DR; Harding, S (2002). "GeoComputation: what is it?".Comput Environ and Urban Syst.26(4): 257–265.Bibcode:2002CEUS...26..257E.doi:10.1016/s0198-9715(01)00047-3.
• Gahegan, M (1999). "What is Geocomputation?".Transactions in GIS.3(3): 203–206.doi:10.1111/1467-9671.00017.S2CID44656909.
• Murgante B., Borruso G., Lapucci A. (2009) "Geocomputation and Urban Planning"Studies in Computational Intelligence,Vol. 176. Springer-Verlag, Berlin.
• Reis, José P.; Silva, Elisabete A.; Pinho, Paulo (2016)."Spatial metrics to study urban patterns in growing and shrinking cities".Urban Geography.37(2): 246–271.doi:10.1080/02723638.2015.1096118.S2CID62886095.
• Papadimitriou, F. (2002). "Modelling indicators and indices of landscape complexity: An approach using G.I.S".Ecological Indicators.2(1–2): 17–25.Bibcode:2002EcInd...2...17P.doi:10.1016/S1470-160X(02)00052-3.
• Fischer M., Leung Y. (2010) "GeoComputational Modelling: Techniques and Applications" Advances in Spatial Science. Springer-Verlag, Berlin.
• Murgante B., Borruso G., Lapucci A. (2011) "Geocomputation, Sustainability and Environmental Planning"Studies in Computational Intelligence,Vol. 348. Springer-Verlag, Berlin.
• Tahmasebi, P.; Hezarkhani, A.; Sahimi, M. (2012). "Multiple-point geostatistical modeling based on the cross-correlation functions".Computational Geosciences.16(3): 779–79742.Bibcode:2012CmpGe..16..779T.doi:10.1007/s10596-012-9287-1.S2CID62710397.
• Geza, Tóth; Áron, Kincses; Zoltán, Nagy (2014).European Spatial Structure.LAP LAMBERT Academic Publishing.doi:10.13140/2.1.1560.2247.

External links

• ICA Commission on Geospatial Analysis and Modeling
• An educational resource about spatial statistics and geostatistics
• A comprehensive guide to principles, techniques & software tools
• Social and Spatial Inequalities
• National Center for Geographic Information and Analysis (NCGIA)
• International Cartographic Association (ICA)– the world body for mapping and GIScience professionals