TheSTEN(orSten gun) is a Britishsubmachine gunchambered in9×19mmwhich was used extensively byBritish and Commonwealthforces throughoutWorld War IIand during theKorean War.The Sten paired a simple design with a low production cost, facilitating mass production to meet the demand for submachine guns.
As well as equipping regular units, the Sten was distributed to resistance groups within occupied Europe. Its simple design made it an effectiveinsurgency weaponfor resistance groups.
The Sten is aselect fire,blowback-operatedweapon with a side-mounted magazine. Sten is an acronym, derived from the names of the weapon's chief designers: Major Reginald V. Shepherd and Harold J. Turpin, and "En" for theEnfield factory.[12][b]
Around four million Stens in various versions were made in the 1940s, making it the second most producedsubmachine gunof the Second World War, after the SovietPPSh-41.The Sten served as the basis for theSterling submachine gun,which replaced the Sten in British service from the 1950s.
The Sten emerged while Britain was engaged in theBattle of Britain,facing invasion byGermany.The army was forced to replace weapons lost during theevacuation from Dunkirkwhile expanding their arsenal at the same time. After the start of the war and to 1941 (and even later), the British purchased all theThompson submachine gunsthey could from the United States, but these did not meet demand, and Thompsons were expensive, the M1928 costing $200 in 1939 (and still $70 in 1942), whereas a Sten would turn out to cost only $11.[15]American entry into the war at the end of 1941 placed an even bigger demand on the facilities making Thompsons. In order to rapidly equip a sufficient fighting force to counter the Axis threat, theRoyal Small Arms Factory,Enfield, was commissioned to produce an alternative.
The credited designers were Major R. V. Shepherd, OBE, Inspector of Armaments in theMinistry of SupplyDesign Department at TheRoyal Arsenal,Woolwich, (later Assistant Chief Superintendent at the Armaments Design Department) and Harold John Turpin, SeniorDraughtsmanof the Design Department of the Royal Small Arms Factory (RSAF), Enfield. Shepherd had been recalled to service after having retired and spending some time at theBirmingham Small Arms Company(BSA).
The Sten shared design features, such as its side-mounted magazine configuration, with theLanchester submachine gunbeing produced at the same time for theRoyal NavyandRoyal Air Force,which was a copy of the GermanMP28.In terms of manufacture, the Lanchester was entirely different, being made of high-quality materials with pre-war fit and finish, in stark contrast to the Sten's austere execution. The Lanchester and Sten magazines were even interchangeable (though the Lanchester's magazine was longer with a 50-round capacity, compared to the Sten's 32.)[16]
The Sten used simplestamped metalcomponents and minor welding, which required minimal machining and manufacturing. Much of the production could be performed by small workshops, with the firearms assembled at the Enfield site. Over the period of manufacture, the Sten design was further simplified: the most basic model, the Mark III, could be produced from five man-hours of work.[17]Some of the cheapest versions were made from only 47 different parts (out of 47 components, only the barrel and bolt were machined).[18]The Mark I was a more finely finished weapon with a wooden foregrip and handle; later versions were generally more spartan, although the final version, the Mark V, which was produced after the threat of invasion had died down, was produced to a higher standard.
The Sten underwent various design improvements over the course of the war. For example, the Mark 4 cocking handle and corresponding hole drilled in the receiver were created to lock the bolt in the closed position to reduce the likelihood ofunintentional dischargesinherent in the design. Most changes to the production process were more subtle, designed to give greater ease of manufacture and increased reliability, and the potentially great differences in build quality contributed to the Sten's reputation as being an unreliable weapon. Historian John Warwicker claimed "Exaggerated reports about the unreliability [of the Sten] were usually related to the quality of manufacture. Don Handscombe and his comrades in the Thundersley Patrol of theAuxiliary Unitsrated them more reliable than the Thompson SMG. "[19]Sten guns of late 1942 and beyond were highly effective weapons, though complaints of accidental discharge continued throughout the war.
The Sten was replaced by theSterling submachine gunfrom 1953 and was gradually withdrawn from British service in the 1960s. OtherCommonwealthnations followed suit, either by creating their own replacements or adopting foreign designs.
The Sten was ablowback-operatedsubmachine gunfiring from anopen boltwith a fixed firing pin on the face of the bolt. This means the bolt remains to the rear when the weapon is cocked and on pulling the trigger the bolt moves forward from spring pressure, stripping the round from the magazine, chambering it and firing the weapon all in the same movement. There is no breech locking mechanism; the rearward movement of the bolt caused by the recoil impulse is arrested only by the mainspring and the bolt's inertia.
The GermanMP40,RussianPPSh-41,and USM3 submachine gun,among others, used the same operating mechanisms and design philosophy of the Sten, namely their low cost and ease of manufacture. Though the MP40 was also built largely for this purpose,Otto Skorzenywent on record saying that he preferred the Sten because it required less raw material to produce and performed better under adverse combat conditions.[20]The effect of putting lightweight automatic weaponry into the hands of soldiers greatly increased the short-range firepower of the infantry, especially when the main infantry weapon was abolt-action riflecapable of only around 15 rounds per minute. The open-bolt firing mechanism, short barrel and use of pistol ammunition severely restricted accuracy andstopping power,with an effective range of only around 60 m (200 ft), compared to 500 m (1,600 ft) for theLee–Enfieldrifle.
Stoppages could occur for poor maintenance, while others were particular to the Sten. Carbon build up on the face of the breech or debris in the bolt raceway could cause a failure to fire, while a dirty chamber could cause a failure to feed.[21]Firing the Sten by grasping the magazine with the supporting hand, contrary to instruction, tended to wear the magazine catch, altering the angle of feed and causing a failure to feed; the correct method of holding the weapon was as with a rifle, the left hand cradling the fore piece.
Sten Mk II magazine insert
The Sten's magazine, which, like the Lanchesters, derived from the MP28, originally to use its magazines, which incorporated the faults of the MP28 magazine.[22]The magazine had two columns of 9mm cartridges in a staggered arrangement, merging at the top to form a column. While other staggered magazines, such as the Thompson, fed from the left and right side alternately (known as "double column, double feed" ), the Sten magazine required the cartridges gradually to merge at the top of the magazine to form a column ( "double column, single feed" ). Dirt or foreign matter in this taper area could cause feedmalfunctions.The walls of the magazine lip had to endure the full stresses of the rounds being pushed in by the spring. This, along with rough handling could result in deformation of the magazine lips (which required a precise 8° feed angle to operate), resulting in misfeeding and a failure to fire.[c]If a Sten failed to feed due to jammed cartridges in the magazine, standard practice to clear it was to remove magazine from the gun, tap the base of the magazine against the knee, re-insert the magazine, then re-cock the weapon and fire again as normal.[21]To facilitate easier loading when attempting to push the cartridges down to insert the next one, a magazine filler tool was developed and formed part of the weapon's kit. The slot on the side of the body where the cocking knob ran was also a target of criticism, as the long opening could allow foreign objects to enter. On the other hand, a beneficial side-effect of the Sten's minimalist design was that it would fire without any lubrication.[21]
The selector was a push button type that actuated a sear disconnector to enable firing in semi-automatic. When firing in this mode, the bolt moves rearward tripping on the sear disconnector downwards requiring the user to release the trigger to fire the weapon again. When firing in full automatic, the selector slightly pivots and moves the sear disconnector sideways enabling the trigger to hold the sear in the firing position without interference of the bolt movement. The open bolt design combined with cheap manufacture and rudimentary safety devices also meant the weapon was prone to accidental discharges, which proved hazardous. A simple safety could be engaged while the bolt was in the rearwards (cocked) position. However, if a loaded Sten with the bolt in the closed position was dropped, or the butt was knocked against the ground, the bolt could move far enough rearward to pick up a round (but not far enough to be engaged by the trigger mechanism) and the spring pressure could be enough to chamber and fire the round. The Mk. IV's cocking handle was designed to prevent this by enabling the bolt to be locked in its forward position, immobilising it. Wear and manufacturing tolerances could render these safety devices ineffective. Though the Sten was somewhat prone to malfunction, in the hands of a well-trained soldier, who knew how to avoid the Sten's failings, they were less of a liability as otherwise may be suggested. According to Leroy Thompson, "Troops usually made the conscious choice to keep the Sten with a magazine in place, based on the assumption that they might need it quickly. It might, then, be argued that more troops were saved by having their Sten ready when an enemy was suddenly encountered than were injured by accident. The Sten was more dangerous to its users than most infantry weapons, but all weapons are dangerous".[20]
Sten guns were produced in several basic marks, of which nearly half of the total produced consisted of the Mark II variant. Approximately 4.5 million Stens were produced during the Second World War.[23]
The first ever Mk I Sten gun (number 'T-40/1' indicating its originator Harold Turpin, the year 1940 and the serial number "1" ) was handmade by Turpin at thePhilcoRadio works atPerivale,Middlesex during December 1940/January 1941 in 36 days.[24]This weapon is held by the historical weapons collection of theBritish Army's Infantry andSmall Arms School Corpsin Warminster, Wiltshire.[25]
The Mark I had a conicalflash hiderand fine finish. The bolt on the Mark I rotated downwards to hold open for safety, similar to that of a bolt action rifle (The bolt on Mark II+ variants rotate upwards). The handguard, vertical forward grip and some of the stock were made of wood. The stock consisted of a small tube, similar to the Mark II Canadian. The barrel shroud had vent holes. The magazine insert was fixed to the receiver with screws (unlike the later found on Mark II+ variants that could be rotated 90 degrees for stowage). A design choice that was only present on the Mark I was that the vertical forward grip could be rotated forward to make it easier to stow. 100,000 Mark I Stens were made before production was moved to the Mark II. Mark I Stens in German possession were designated MP 748(e), the 'e' standing forenglisch.[26]
The Mark I* (pronounced "Mark-One-Star" ) variant was to simplify production of the Mark I, the handguard, vertical foreward grip, vent holes, wooden furniture and conical flash hider were removed with this variant.[27][26]It was the first variant to come with a tube stock.
The Mark II was the most common mainstream variant, with two million units produced.[23]The flash eliminator and the folding handle (the grip) of the Mk I were omitted. A removable barrel was now provided which projected 3 inches (76 mm) beyond the barrel sleeve. It used a tube stock. Also, a special catch allowed the magazine to be slid partly out of the magazine housing and the housing rotated 90 degrees counter-clockwise (from the operator's perspective), together covering the ejection opening and allowing the weapon and magazine both to lie flat on its side.[26]
The barrel sleeve was shorter and rather than having small holes on the top, it had three sets of three holes equally spaced on the shroud. To allow a soldier to hold a Sten by the hot barrel sleeve with the supporting hand, an insulating lace-on leather sleeve guard was sometimes issued.[d]Sten Mk II's in German possession were designated MP 749(e). Some Mk IIs had wooden stocks.[26]TheSpz-kr assault rifle,a rudimentary German design made in the closing stages of the war, used the receiver and components from the Sten Mk II, and theMP 3008was made as a cheap copy.
Worker posing with a Sten Mk II in the factory on 26 May 1942.
During World War II, a variation of the Sten gun was produced atthe Long Branch Arsenal plantinLong Branch, Ontario(now Lakeview, an area ofMississauga,Peel Region). This was very similar to the regular Mark II, with a different stock ('skeleton' type instead of strut type). It was first used in combat in theDieppe Raidin 1942.
The Mark II that were made in China with a copy known as the M38.[28]The Chinese M38s were made in an automatic-only configuration, unlike the standard Mark II. The M38 was made in9×19mmand7.62×25mm Tokarevvariants.
After the Mark II, this was the most produced variant of the Sten, manufactured in Canada alongside the United Kingdom, withLines Bros Ltdbeing the largest producer.[26]The Mark III was made of 48 parts, compared to the Mark II's 69, but the Mark II remained more commonplace for logistical reasons – parts between the two were not interchangeable.[17]Though slightly lighter, the magazine well was fixed in place, and the barrel could not be removed, meaning if it was damaged the weapon had to be scrapped. Combined with the fact the Mark III was more prone to failure than the Mark II, production of the weapon ceased in September 1943.[29]Unlike the Mark II, the receiver, ejection port, and barrel shroud were unified, leading to them being extended further up the barrel. Captured Sten Mk III's in German possession were designated MP 750(e). A total of 876,886 Mark III's were produced.[30]
Soldiers of Durham Light Infantry with a Sten Mk III.
The Mark V added a bayonet mount, and a wooden pistol grip and stock.[26]There was a No. 4Lee–EnfieldFront sight and the weapon was of better quality manufacture and finish than the Mk II and Mk III.
Another variant of the Mk V had a swivel stock and rear sight mirror intended for firing around corners in urban warfare, similar to theKrummlaufdeveloped by the Germans for theStG 44.[31]
Mk II(S) and Mk VI models incorporated an integralsuppressorand had a lower muzzle velocity than the others due to a ported barrel intended to reduce velocity to below thespeed of sound– 305 m/s (1,001 ft/s) – without needingspecial ammunition.The suppressor heated up rapidly when the weapon was fired, and a canvas cover was laced around the suppressor for protection for the firer's supporting hand.[32]
Mk II(S)
Designed in 1943, the Mk II(S) ( "Special-Purpose" ) was an integrally suppressed version of the Mk II. Captured examples of the Sten Mk II(S) in German service were designated MP 751(e).[26]
Mk VI
The Mk VI was a suppressed version of the Mk V. The Mk VI was the heaviest version due to the added weight of the suppressor, as well as using a wooden pistol grip and stock.
The suppressed models were produced at the request of theSpecial Operations Executive(SOE) for use in clandestine operations in occupied Europe, starting with the Mk II(S) in 1943. Owing to their tendency to overheat, they were fired in short bursts or single shots.[33]Some guns were even changed to semi-automatic only.
This was a standard Sten Mk.II with a wooden stock attached in place of the wireframe steel stock used with Mk.IIs. This wooden stock model was never put into service; likely due to the cost of producing it.
Mark II (Rosciszewski model)
This was a Sten Mk.II modified by Antoni Rosciszewski of Small Arms Ltd. The magazine was mechanically operated by the breech block movement. The trigger was split into two sections, with the upper part of the trigger offering full-auto fire and a lower part offering single shots. It was very complex in design and never fielded.
Mark II (pistol grip model)
This was a Sten Mk.II with a wireframepistol grip,intended for use with paratroopers. It was compact but predictably uncomfortable to fire.
Model T42
This was a Sten Mk.II modified with a five-inch barrel andfolding stock,as well as a conventional pistol grip and redesigned trigger guard. It was dubbed the "T42" in prototype phases, but never entered service.
Mark IV
The Mark IV was a smaller variant of the Sten, comparable in size to a pistol, and never left the prototype stage. It used a conical flash hider, a shortened barrel, and a much lighter stock.[26]
Rofsten
Developed at the Royal Ordnance Factory in Fazakerley (ROF Fazakerley), the Rofsten was an odd Sten prototype with a redesigned magazine feed, ergonomic pistol grip, selector switch and cocking system. The weapon was cocked by pulling the small ring above the stock. A large flash eliminator was fixed onto the barrel, and a No.5 bayonet could be fixed. It was made to a very high quality standard and had an increased rate of fire (around 900 rounds per minute). The Rofsten was made in 1944 as a single prototype and ROF wanted to submit it to trials the next year. Despite better quality there were numerous reliability problems due to the much higher rate of fire. The budget cuts prevented the modifications and this version never got beyond the prototype stage.
Small Arms Ltd. Model 2
Designed by Antoni Rosciszewski of Small Arms Ltd, this weapon used a magazine with an internal endless belt-feed holding 50 rounds of ammunition. The weapon also had a two-stage trigger for automatic and semi-automatic fire.
Viper mk1
Viper Mk1This version simplified the weapon, including thetriggermechanism and barrel which was welded to the gun making it not removable.[34]The weapon was also fully automatic and there was no semi-automatic function on the gun. It was made in the United Kingdom afterWorld War IIand was a prototype weapon never used as it was deemed impractical. It was designed for military policeman in post-war Germany to be fired one-handed. Only one was ever made and it is currently held at theRoyal Armouries MuseuminLeeds,United Kingdom.[34]
Sten MkIIs were licence-copied in Argentina byPistola Hispano Argentinoand can be recognised with a wooden handguard in front of the trigger group. It was known as the Modelo C.4.[35]Another variant came with a pistol grip section based on theBallester–Molina.45 pistol.[36]TheHalcon ML-57was a simpler derivative of the Sten gun of Argentine origin that was fed from a vertically inserted magazine.
Crude example of locally-made Indonesian Sten gun
Indonesia
Indigenous copies were produced at the former Demakijo (alternatively Demak Ijo) sugar mill inSleman Regencyand other factories throughout Yogyakarta in 1946–1948 for the Indonesian Army during theIndonesian National Revolution.[37][38]The indigenous Sten had the trigger group closer to the magazine insert.[39]Another variant of the indigenous copies was namedPren Gun,from the portmanteau of Pranggono (the designer) and Sten gun. Pren Gun were made at a factory in Tirtomoyo, Wonogiri Regency for the Surakarta-basedTentara Genie Pelajar(Student Soldiers Combat Engineers). The design were similar to Sten Mk II with wire stock and additional flash hider.[40]
Israel
Copies of the Sten Mk II and Sten Mk V were clandestinely manufactured in Tel Aviv and on variouskibbutzimin 1945–48 for use withHaganahand other Jewish paramilitary groups.[28][41]
France
The French "Gnome et Rhône" R5 Sten, manufactured inLimogesby the motorbike and aeroplane engine manufacturerGnome et Rhône(SNECMA), came with a shorter barrel, a forward pistol grip and distinctive wooden stock, although its greatest improvement was a sliding bolt safety, added to secure the bolt in its forward position. Dimensions have been converted to the metric system, so the parts were not interchangeable with the Sten. From an initial target of 10,000 to 20,000 copies, 8,100 R5s were produced between late 1944 and November 1945. They were delivered to the formerFFIunits of theFrench Liberation Armyand some were used during theWestern Allied invasion of Germanyand theFirst Indochina War.[42] Another variant made by MAC (Manufacture d’armes de Châtellerault), were made and tested shortly after WWII. One variant had an unusual stock shape that proved detrimental to the user aim. Internally it was basically a Sten gun but had two triggers for semi/full auto, a grip safety and a foregrip that used MP40 magazines. Another had a folding stock with a folding magazine insert. The trigger mechanism was complicated and unusual. Neither of these prototypes had any kind of success and MAC closed its doors not long after their conception.
Norway
The Norwegian resistance, under the leadership ofBror With,created a large number of Sten guns from scratch, mainly to equip members of the underground armyMilorg.[26]In his autobiography, Norwegian resistance fighterMax Manusfrequently mentions the Sten[43]as one of the weapons his groups of commandos and resistance fighters used effectively against German troops.[undue weight?–discuss]
Denmark
Several groups in the Danish resistance movement manufactured Sten guns for their own use.BOPAproduced around 200 in a bicycle repair shop on Gammel Køge landevej (Old Køge road), south of Copenhagen.Holger Danskeproduced about 150 in workshops in Copenhagen, while employees of the construction companyMonberg & Thorsenbuilt approximately 200–300 in what is now the municipality of Gladsaxe (a suburb of Copenhagen) for use by Holger Danske and others. The resistance groups 'Frit Danmark' and 'Ringen' also built significant numbers of Stens.
From 1942 and 1944, approximately 11,000 Sten Mk IIs were delivered to theArmia Krajowaby the SOE andCichociemni.Because of the simplicity of the design, local production of Sten variants was started in at least 23 underground workshops in Poland, with some producing copies of the Mark II, and others developing their own designs, namely thePolski Sten,theKIS,and the more significantly alteredBłyskawica.Polski Stens made in Warsaw under the command ofRyszard Białostockiwere built from parts made in official factories, with the main body of the design being made from hydraulic cylinders produced for hospital equipment. To help disguise their origin, the Polski Stens were marked in English.[26]
Details underneath of the magazine well stamping on a Belgian Sten
Belgium
A little known version of the MkII Sten was built in Belgium byl'arsenale militare belga(the Belgian military arsenal). The magazine well was stamped AsArm (the manufacturer), ABL (for Armée Belge Belgisch Leger), the Belgian Royal Crown and a serial number of typically five figure with no letter prefix. It is believed the Belgian built Mk II Stens remained in ABL service until the early 1980s, particularly with helicopter-borne forces. Some of the weapons had a "Parkerised" finish.[citation needed]After the Second World War the Belgian Army was mainly equipped with a mixture of British and American submachine guns. The army, wanting to replace them with a modern and preferably native design, tested various designs with theVigneron M2and licence-producedFN Uzibeing selected. However, the Imperia was an improved Sten with a fire selector and retractable stock.
Germany
In late 1944,Mauserbegan to produce copies of the Mk II Sten for sabotage purposes.[26]The series was referred to as theGerät Potsdam(Potsdam Device)[44]and almost 10,000 weapons were made.[20]By 1945, Germany was seeking a cheaper replacement for theMP40submachine gun to issue to theVolkssturm.Mauser produced a modified Sten, named theMP 3008.[44]The main difference was that the magazine attached below the weapon. Altogether, roughly 10,000 were produced in early 1945, just before the end of World War II.[45]
Australia
The Mark IAusten submachine gun( "Australian Sten" ) was an Australian design, derived from the Sten and manufactured by Diecasters Ltd ofMelbourneand W. T. Carmichael Ltd ofSydney.[46]It externally resembled the Sten but had twin pistol grips and folding stock resembling those of the German MP40.[47]Australian and NZ troops however preferred theOwen gunwhich was more reliable and robust in jungle warfare.[48]A Mk 2 version was also produced which was of different appearance and which made more use of die-cast components.[49]20,000 Austens were made during the war and the Austen was replaced by theF1 submachine gunin the 1960s.[47]
United States
A short-lived American invention developed in the 1980s, theSputter Gunwas designed to circumventthe lawthat defined amachine gunas something that fired multiple rounds with one pull of the trigger. The Sputter Gun had no trigger, but fired continuously after loading and the pulling back of its bolt, firing until it ran out of ammunition. The gun was very short lived as theATFquickly reclassified it. During the 1970s-1980s, International Ordnance of San Antonio, Texas, United States released theMP2machine pistol. It was intended as a more compact, simpler derivative of the British Sten gun to be used in urban guerrilla actions, to be manufactured cheaply and/or in less-than-well-equipped workshops and distributed to "friendly" undercover forces. Much like theFP-45 Liberatorpistol of World War II, it could be discarded during an escape with no substantial loss for the force's arsenal. The MP2 is a blowback-operated weapon that fires from an open bolt with an extremely high rate of fire.
Guatemala
TheSM-9is a machine pistol of Guatemalan origin and manufactured by Cellini-Dunn IMG, Military Research Corp and Wildfire Munitions as the SM-90. It is blowback operated, firing from an open bolt and can use magazines from IngramMAC-10submachine guns inserted into a similar foregrip that can be rotated 45 and 90 degrees for left/right handed operators. The layout of the receiver is somewhat simpler than that of a Sten with its internal components light in weight enabling a very high rate of fire of 1200rpm. Its forward pistol grip can hold a spare magazine as well as handling the weapon when firing.
Croatia
ThePleter submachine gunwas created in 1991 when the breakup of Yugoslavia in the midst of emerging war left the newly formed Republic of Croatia with small number of military firearms. Since the embargo prevented the Croatian military from legally buying them on open market (so they were mostly obtained on the world black market, but with significantly higher price and sometimes of questionable quality), to fulfill the immediate need for arms, they tried to resort on quick and simple locally made designs. Despite having a vertical magazine well (designed to accept 32-round staggered-feed direct copy ofUZImagazine, rather than original single-feed Sten-type magazine), analogies with the Sten include a striking resemblance in the barrel assembly and in the bolt and recoil spring. In addition, this gun also fires from an open bolt, and is further simplified by removing fire mode selector or any safety.
Canada
SMG International in Canada manufactured reproductions of the Sten in six variants.[when?]They made copies of the Sten's Mk 1*, Mk II and Mk III, a "New Zealand Sten" (a Mk II/III Sten hybrid, with sights and a fixed magazine housing similar to the Mk III), then branched out into "hypothetical" Sten-guns with a "Rotary Magazine Sten" (a Mk II Sten with a drum magazine attached below the weapon and wooden horizontal forward grip on the left side of the weapon) and the "FRT Gun" (a long barrel Sten with a wooden or Mk 1* type butt stock, a drum magazine attached below the weapon and sliding ramp rear sights). These last two being obviously not Sten reproductions, especially if they included a drum magazine.[50]The "Rotary Magazine Sten" is a vertically fed Sten which uses a modified Sten bolt, which can use either PPSh drum magazines or stick magazines. The FRT gun is essentially a Suomi that uses a Sten trigger mechanism. All SaskSten guns fire from an open bolt.[51][full citation needed]
Taiwan
During the 1950s in the 39th year of the Republic of China, the 44th Arsenal developed a prototype Sten with a folding Dadao blade known as the Type 90. This example used a rear pistol grip and an inline tube stock with folding blade catch and extended barrel shroud.
The Sten MKII can be converted to take 7.62×25mm ammo by changing the barrel, magazine, magazine housing and bolt.[52]Some of them were imported to the US before 1968.[52]These MKIIs were made by Long Branch as part of a Nationalist Chinese contract.[53]
While all types of 7.62×25mm ammo can be used, those made in the former Czechoslovakia are made for small arms that can handle high velocity, so users are not advised to use them.[52]
The Sten, especially the Mark II, tended to attract affection and loathing in equal measure. Its peculiar appearance when compared to other firearms of the era, combined with sometimes questionable reliability made it unpopular with some front-line troops.[54]It gained nicknames such as "Plumber's Nightmare", "Plumber's Abortion", or "Stench Gun".[23]The Sten's advantage was its ease of mass-production manufacture in a time of shortage during a major conflict.
Made by a variety of manufacturers, often with subcontracted parts, some early Sten guns were made poorly and/or not to specification, and could malfunction in operation, sometimes in combat.[55]The double-column, single-feed magazine copied from the German MP28 was never completely satisfactory, and hasty manufacturing processes often exacerbated the misfeed problems inherent in the design. A common statement heard from British forces at the time was that the Sten was made "byMarks and Spencerout of Woolworth. "[56]British and Commonwealth forces in the early years of the war often extensively test-fired their weapons in training to weed out bad examples; a last-minute issue of newly manufactured Stens prior to going into action was not welcomed.[citation needed]
The MK II and III Stens were regarded by many soldiers as very temperamental, and couldaccidentally dischargeif dropped or even laid on the ground whilst the gun was cocked.[56]Others would fire full-automatic when placed on 'single', or fire single shots when placed on 'automatic'.[56]This was particularly true of early Stens using bronze bolts, where the sear projection underneath the bolt could wear down more easily than ones made ofcase-hardenedsteel.
Stens could jam at inopportune moments. One of the more notable instances of this was the assassination ofSS–ObergruppenführerReinhard Heydrichon 27 May 1942, when Czechoslovak Warrant OfficerJozef Gabčíkwanted to fire his Sten point blank at Heydrich, only to have it misfire. His comradeJan Kubišthen hastily tossed a grenade, which mortally wounded Heydrich.[55]There are other accounts of the Sten's unreliability, some of them true, some exaggerated and someapocryphal.France[57]manufactured (well-made) Sten copies postwar into the early 1950s, evidently believing in the basic reliability and durability of the design.
The "Monumento al Partigiano" in Parma, Italy, depicts anItalian partisanholding a Sten.
A well-maintained (and properly functioning) Sten gun was a devastating close-range weapon for sections previously armed only with bolt-action rifles. In addition to regular British and Commonwealth military service, Stens were air-dropped in quantity to resistance fighters and partisans throughout occupied Europe. Due to their slim profile and ease of disassembly/reassembly, they were good for concealment andguerrilla warfare.Wrapping the barrel in wet rags would delay undesirable overheating of the barrel.[58]Guerrilla fighters in Europe became adept at repairing, modifying and eventually scratch-building clones of the Sten (over 2,000 Stens and about 500 of the similarBłyskawica SMGswere manufactured in occupied Poland).
Canadian infantry battalions in northwest Europe retained spare Sten guns for special missions and the Canadian Army reported a surplus of the weapons in 1944.
The Sten saw use even after the economic crunch of World War II, replacing the Royal Navy'sLanchestersubmachine guns into the 1960s, and was used in theKorean War,including specialist versions forBritish Commandos.It was slowly withdrawn from British Army service in the 1960s and replaced by theSterling SMG;Canada also phased out the Sten, replacing it with theC1 SMG.
The Sten was one of the few weapons that the State of Israel could produce domestically during the1948 Arab–Israeli War.Even before the declaration of the State of Israel, theYishuvhad been producing Stens for theHaganah;after the declaration, Israel continued making Stens forIDFuse. The opposing side also used (mostly British-made) Stens, particularly the irregular and semi-regularArab Liberation Army.[59]
In the 1950s,"L numbering"came into use in the British Army for weapons—Stens were then known as L50 (Mk II), L51 (Mk III) and L52 (Mk V).
One of the last times the Sten was used in combat during British service was with theRUCduring theIRA border campaignof 1956–1962. In foreign service, the Sten was used in combat at least as recently as theIndo-Pakistani War of 1971.
In 1984, Indian prime ministerIndira Gandhiwasassassinatedby two of her bodyguards,oneof whom fired the entire magazine (30 rounds) of his Sten at point-blank range, of which 27 hit her.
In theSecond Sino-Japanese Warand theChinese Civil War,both nationalists and communist Chinese forces used the Sten. Some Stens were converted by the communists to 7.62×25mm[28]by using the magazine housing from aPPSto accept curved PPS magazines. British, Canadian, and Chinese Stens were seen in the hands of the communists during the Korean and Vietnam Wars.[28]
TheFinnish Armyacquired moderate numbers of Stens in the late 1950s, mainly Mk. III versions. Refurbishment at theKuopioArsenal includedbluingof the arms. Stens in Finnish service saw limited usage by conscripts (notablycombat swimmers) and were mostly stockpiled for use in a future mobilization.
During theZapatistamovement in 1994, some Zapatista soldiers were armed with Sten guns.[63]
Italy[23]Sten guns were supplied to the Italian resistance movement by the SOE, along with the United Defense M42 submachine gun supplied by the OSS during the Italian Campaign. These guns, along with the Berretta M38A, were used by the Italian partisans until the end of World War II.
Nazi Germany:Used some captured Stens during World War II, under the designationsMP 748 (e)for the Mark I toMP 751 (e)for the Mark V.[45]From late 1944, they produced an almost identical copy for home defence: theMP 3008.[45]
Norway:Used by the Norwegian resistance from 1940–1945. The guns came to the resistance groups by air (supply drops).[82]Used by the Army after the war.[92]
Philippines:Used by the Recognized Guerrilla Units during World War II.[94]
Poland:Used byPolish Armed Forces in the West[79]and main resistance army in occupied Poland, theArmia Krajowa(Home Army). The majority of the resistance's Stens were dropped to Poland in SOE supply drops, but some of the Polish Stens were produced in the occupied country.[95]Polish engineers also designed their own Sten version, theBłyskawica submachine gun.After the war, it was used by many anti-communist partisan groups (cursed soldiers).
^plus numerous sub-contractors making individual parts
^Colonel Shepherd discussing how it was named when he received an Award from the Board of the Royal Commission Awards to Inventors.
Lord Cohen: "Why was it called the Sten?"
Colonel Shepard: "It was called the Sten by the then Director General of Artillery. TheSwas from my name, theTfrom Mr. Turpin who was my draughtsman and who did a very large amount of the design and theENwas for England. That is the origin of the name, for which I accept no responsibility. "[13]In the official history of the Royal Ordnance Factories, ST is for Shepard and Turpin and EN is for Enfield[14]Some sources give J.J.Turpin rather than Harold
^Modern 9 mm magazines, such as those used by theSterling submachine gun,are curved and feed both sides to avoid this problem.
^The barrel sleeve was generally considered the proper place for the supporting hand, as holding the weapon by its magazine could sometimes initiate a feed malfunction. However, the metal barrel sleeve heated rapidly after only a few bursts.
^abcdefghijkHenrotin, Gerard (2008).The English Sten Submachine Gun Explained.HL Publishing. p. 6.
^Skennerton, Ian (September 1988).British Small Arms of World War 2: The Complete Reference Guide to Weapons, Codes and Contracts, 1936-1946.Greenhill Books. p. 32.ISBN978-0-949749-09-3.
^Koleksi Senjata di Museum Pusat ABRI Satriamandala[Weapons Collection at the Satriamandala Armed Forces Central Museum] (in Indonesian). Jakarta: Departemen Pertahanan - Keamanan Pusat Sejarah ABRI. 1977. p. 14-15.
^Manus, Max,Part I, Det vil helst gå godt(It'd best be all right);Part II, Det blir alvor(It gets serious), Familieforlaget (1946),ISBN978-82-8214-043-0
^Ian Skennerton (1994).Small Arms Identification Series: 9mm AUSTEN Mk I and 9mm OWEN Mk I Sub-Machine Guns - Parts Identification & Lists, S.M.G. Series Notes, Exploded Parts Drawings, Descriptions, Accessories & Fittings.Ian D Skennerton. p. 5.ISBN0-949749-24-9.
^Larsen, Colin (1946).Pacific Commandos: New Zealanders and Fi gian s in Action. A History of Southern Independent Commando and First Commando Fiji Guerrillas.Wellington: Reed Publishing. pp.93–103.
^Russell, Lee; Katz, Sam (April 1986).Israeli Defense Forces, 1948 to the Present.Uniforms Illustrated 12. Olympic Marketing Corp. p. 15.ISBN978-0853687559.
^McMullin, Jaremey (2013).Ex-Combatants and the Post-Conflict State: Challenges of Reintegration.Basingstoke: Palgrave-Macmillan. pp.81–89.ISBN978-1-349-33179-6.
^Goscha, Christopher (2013).Thailand and the Southeast Asian Networks of The Vietnamese Revolution, 1885-1954.Routledge. p. 185.
^Shakya, Tsering(1999).The Dragon in the Land of Shows: A History of Modern Tibet Since 1949.Columbia University Press. pp.5–6,8–9,11–15, 26, 31,38–40.
Albania:Used by the Albanian National Liberation Army during World War II. The weapons were supplied by the British SOE.[64]
Argentina:Modelo C.4..[65]
Australia: Locally produced during World War II.[66]
Bangladesh:Extensively used during1971 war.[6]
Botswana[67]
Belgium[68]
British Hong Kong
Canada: Locally produced during World War II.[66]
Central African Republic:Central African Republic Policehad 10 Stens in 1963[69]
Ceylon[68]
Republic of the Congo (Léopoldville)[70]
Cuba:[72]Fidel Castropraised the Canadian Sten gun in his 1958 interview withErik Durschmied[73]
Cyprus[74]
People's Republic of China:Most used by communist forces had their Stens converted to 7.62x25 caliber.[53][65]
Republic of China[65]
Czechoslovakia:Used by Czechoslovak troops forOperation Anthropoid,the assassination ofReinhard Heydrich.The gun jammed and failed to fire.[75]
Denmark:Used by the Danish resistance movements likeBOPAandHolger Danske.Locally produced.[76]
Egypt[67][77]
Finland:76 115 MK 2s and 3s bought in 1957–1958; used until replaced by assault rifles.[78]
France: Used during World War II by theFree Frenchforces,[79]theFrench Resistanceand some captured from the Resistance were used by the pro-GermanMilice française.[80]Still used after World War II.[81]
Greece[82]
Grenada[citation needed]
India[65]
IndonesiaUsed by republicans Forces[65][83]
Israel:Used in the1947–1949 Palestine war[59]and theSuez Crisis.[84]
Italy[23]Sten guns were supplied to the Italian resistance movement by the SOE, along with the United Defense M42 submachine gun supplied by the OSS during the Italian Campaign. These guns, along with the Berretta M38A, were used by the Italian partisans until the end of World War II.
Empire of Japan[68]
Jordan:Arab Legion[85]
Kenya:[23]Used by the regular police paramilitary GSU, army paratroopers; replaced by G3A3/4, M4 and HK416.
Kingdom of Laos:[67]Used by theRoyal Lao Armyand theCIA-sponsored irregular Special Guerrilla Groups during theLaotian Civil War.
Libya[86]
Luxembourg[68]
Malaysia:[67]Used byRoyal Malaysia Police,Malaysian Army,Royal Malaysian NavyandMalaysian Prison Departmentin 1950s to 1970s.
Malta[68]
Myanmar:Retired.[87]
Nepal:[67]Still in service in 2006.[88]
Netherlands[89]
Nazi Germany:Used some captured Stens during World War II, under the designationsMP 748 (e)for the Mark I toMP 751 (e)for the Mark V.[45]From late 1944, they produced an almost identical copy for home defence: theMP 3008.[45]
New Zealand[90]
Nigeria[5]
North Korea:Canadian Mk II and Chinese M38 copies.[91]
Norway:Used by the Norwegian resistance from 1940–1945. The guns came to the resistance groups by air (supply drops).[82]Used by the Army after the war.[92]
Pakistan[93][65]
Philippines:Used by the Recognized Guerrilla Units during World War II.[94]
Poland:Used byPolish Armed Forces in the West[79]and main resistance army in occupied Poland, theArmia Krajowa(Home Army). The majority of the resistance's Stens were dropped to Poland in SOE supply drops, but some of the Polish Stens were produced in the occupied country.[95]Polish engineers also designed their own Sten version, theBłyskawica submachine gun.After the war, it was used by many anti-communist partisan groups (cursed soldiers).
Portugal:Known asm/43.[96]
Rhodesia[97]
Sierra Leone[98]
South Africa[99]
South Vietnam[81]
Thailand[101]
Tibet:TheTibetan Armypurchased 168 guns in 1950.[102]
Turkey[68]
United Kingdom[103]
United States: Suppressed Stens used during the Vietnam War by American special forces.[62]
North Vietnam:Việt MinhandViet Cong[104][105]
Yugoslavia:Used by theYugoslav PartisansandChetniks.[106][107]Also used after the war.[108]
Front de libération du Québec:Stolen from Canadian armories.[109][110]
FNLA[111]
