Flight instruments
![](https://upload.wikimedia.org/wikipedia/commons/thumb/e/e7/Slingsby.t67c.panel.g-bocm.arp.jpg/400px-Slingsby.t67c.panel.g-bocm.arp.jpg)
Flight instrumentsare the instruments in thecockpitof anaircraftthat provide thepilotwith data about the flight situation of that aircraft, such asaltitude,airspeed,vertical speed,heading and much more other crucial information in flight. They improve safety by allowing the pilot to fly the aircraft in level flight, and make turns, without a reference outside the aircraft such as the horizon.Visual flight rules(VFR) require anairspeed indicator,analtimeter,and acompassor other suitable magnetic direction indicator.Instrument flight rules(IFR) additionally require a gyroscopic pitch-bank (artificial horizon), direction (directional gyro) and rate of turn indicator, plus a slip-skid indicator, adjustable altimeter, and a clock. Flight intoinstrument meteorological conditions(IMC) requireradio navigationinstruments for precise takeoffs and landings.[1]: 3–1
The term is sometimes used loosely as a synonym forcockpit instrumentsas a whole, in which context it can include engine instruments, navigational and communication equipment. Many modern aircraft haveelectronic flight instrument systems.
Most regulated aircraft have these flight instruments as dictated by the USCode of Federal Regulations,Title 14, Part 91. They are grouped according topitot-static system,compass systems, andgyroscopicinstruments.[1]: 3–1
Pitot-static systems
[edit]Instruments which arepitot-static systemsuse air pressure differences to determine speed and altitude.
Altimeter
[edit]The altimeter shows the aircraft's altitude above sea-level by measuring the difference between the pressure in a stack ofaneroidcapsules inside the altimeter and the atmospheric pressure obtained through thestaticsystem. The most common unit for altimeter calibration worldwide ishectopascals(hPa), except for North America and Japan whereinches of mercury(inHg) are used.[2]The altimeter is adjustable for local barometric pressure which must be set correctly to obtain accurate altitude readings, usually in either feet or meters. As the aircraft ascends, the capsules expand and the static pressure drops, causing the altimeter to indicate a higher altitude. The opposite effect occurs when descending. With the advancement in aviation and increased altitude ceiling, the altimeter dial had to be altered for use both at higher and lower altitudes. Hence when the needles were indicating lower altitudes i.e. the first 360-degree operation of the pointers was delineated by the appearance of a small window with oblique lines warning the pilot that he or she is nearer to the ground. This modification was introduced in the early sixties after the recurrence of air accidents caused by the confusion in the pilot's mind. At higher altitudes, the window will disappear.[1]: 3–3
Airspeed indicator
[edit]The airspeed indicator shows the aircraft's speed relative to the surrounding air.Knotsis the currently most used unit, but kilometers per hour is sometimes used instead. The airspeed indicator works by measuring the ram-air pressure in the aircraft'spitot tuberelative to the ambient static pressure. Theindicated airspeed(IAS) must be corrected for nonstandard pressure and temperature in order to obtain thetrue airspeed(TAS). The instrument is color coded to indicate important airspeeds such as the stall speed, never-exceed airspeed, or safeflapoperation speeds.[1]: 3-7 to 3-8
Vertical speed indicator
[edit]The VSI (also sometimes called avariometer,or rate of climb indicator) senses changing air pressure, and displays that information to the pilot as a rate of climb or descent in feet per minute, meters per second or knots.[1]: 3-8 to 3-9
Compass systems
[edit]Magnetic compass
[edit]The compass shows the aircraft's heading relative to magnetic north. Errors includeVariation,or the difference between magnetic and true direction, and Deviation, caused by the electrical wiring in the aircraft, which requires a Compass Correction Card. Additionally, the compass is subject to Dip Errors. While reliable in steady level flight it can give confusing indications whenturning,climbing, descending, or accelerating due to the inclination of the Earth's magnetic field. For this reason, theheading indicatoris also used for aircraft operation, but periodically calibrated against the compass.[1]: 3-9 to 3-13, 3–19
Gyroscopic systems
[edit]Attitude Indicator
[edit]The attitude indicator (also known as anartificial horizon) shows the aircraft's relation to the horizon. From this the pilot can tell whether the wings are level (roll) and if the aircraft nose is pointing above or below the horizon (pitch).[1]: 3-18 to 3-19 Attitude is always presented to users in the unitdegrees(°).[citation needed]The attitude indicator is a primary instrument for instrument flight and is also useful in conditions of poor visibility. Pilots are trained to use other instruments in combination should this instrument or its power fail.
![](https://upload.wikimedia.org/wikipedia/commons/thumb/5/50/Glider_Instrument_Panel.png/250px-Glider_Instrument_Panel.png)
Heading indicator
[edit]The heading indicator (also known as the directional gyro, or DG) displays the aircraft's heading incompass points,and with respect to magnetic north when set with a compass. Bearing friction causes drift errors fromprecession,which must be periodically corrected by calibrating the instrument to the magnetic compass.[1]: 3-19 to 3-20 In many advanced aircraft (including almost all jet aircraft), the heading indicator is replaced by ahorizontal situation indicator(HSI) which provides the same heading information, but also assists with navigation.
Turn indicator
[edit]These include the Turn-and-Slip Indicator and the Turn Coordinator, which indicate rotation about thelongitudinal axis.They include aninclinometerto indicate if the aircraft is inCoordinated flight,or in aSliporSkid.Additional marks indicate aStandard rate turn.[1]: 3-20 to 3-22 The turn rate is most commonly expressed in eitherdegreespersecond(deg/s) orminutesperturn(min/tr).[citation needed]
Flight director systems
[edit]These include the Horizontal Situation Indicator (HSI) and Attitude Director Indicator (ADI). The HSI combines the magnetic compass with navigation signals and aGlide slope.The navigation information comes from aVOR/Localizer,orGNSS.The ADI is an Attitude Indicator with computer-driven steering bars, a task reliever during instrument flight.[1]: 3-22 to 3-23, 7–10
Navigational systems
[edit]Very-High Frequency Omnidirectional Range (VOR)
[edit]The VOR indicator instrument includes aCourse deviation indicator(CDI), Omnibearing Selector (OBS), TO/FROM indicator, and Flags. The CDI shows an aircraft's lateral position in relation to a selected radial track. It is used for orientation, tracking to or from a station, and course interception.[1]: 7-8 to 7-11 On the instrument, the vertical needle indicates the lateral position of the selected track. A horizontal needle allows the pilot to follow a glide slope when the instrument is used with an ILS.
Nondirectional Radio Beacon (NDB)
[edit]TheAutomatic direction finder(ADF) indicator instrument can be a fixed-card, movable card, or aRadio magnetic indicator(RMI). An RMI is remotely coupled to a gyrocompass so that it automatically rotates the azimuth card to represent aircraft heading.[1]: 7-3 to 7-4 While simple ADF displays may have only one needle, a typical RMI has two, coupled to different ADF receivers, allowing forposition fixingusing one instrument.
Layout
[edit]Most aircraft are equipped with a standard set offlight instrumentswhich give the pilot information about the aircraft's attitude, airspeed, and altitude.
T arrangement
[edit]Most US aircraft built since the 1940s have flight instruments arranged in a standardized pattern called the "T" arrangement.[3]The attitude indicator is in the top center, airspeed to the left, altimeter to the right and heading indicator under the attitude indicator. The other two, turn-coordinator and vertical-speed, are usually found under the airspeed and altimeter, but are given more latitude in placement. The magnetic compass will be above the instrument panel, often on thewindscreencenterpost. In newer aircraft withglass cockpitinstruments the layout of the displays conform to the basic T arrangement.
Early history
[edit]In 1929,Jimmy Doolittlebecame the first pilot to take off, fly and land an airplane using instruments alone, without a view outside the cockpit. In 1937, the BritishRoyal Air Force(RAF) chose a set of six essential flight instruments[4]which would remain the standard panel used for flying ininstrument meteorological conditions(IMC) for the next 20 years. They were:
- altimeter(feet)
- airspeed indicator(knots)
- turn and bank indicator(turn direction and coordination)
- vertical speed indicator(feet per minute)
- artificial horizon(attitude indication)
- directional gyro / heading indicator(degrees)
This panel arrangement was incorporated into all RAF aircraft built toofficial specificationfrom 1938, such as theMiles Master,Hawker Hurricane,Supermarine Spitfire,and 4-enginedAvro LancasterandHandley Page Halifaxheavy bombers, but not the earlier light single-enginedTiger Mothtrainer, and minimized the type-conversion difficulties associated with blind flying, since a pilot trained on one aircraft could quickly become accustomed to any other if the instruments were identical.
This basic six set, also known as a "six pack",[5]was also adopted by commercial aviation. After theSecond World Warthe arrangement was changed to: (top row) airspeed, artificial horizon, altimeter, (bottom row) turn and bank indicator, heading indicator, vertical speed.
Further development
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/7/70/PFD.png/400px-PFD.png)
In glass cockpits the flight instruments are shown on monitors.Primary flight display,is given a central place on the panel, superseding the artificial horizon, often, with ahorizontal situation indicatornext to it or integrated with the PFD. The indicated airspeed, altimeter, and vertical speed indicator are displayed as moving "tapes" with the indicated airspeed to the left of the horizon and the altimeter and the vertical speed to the right in the same layout as in most older style "clock cockpits".
See also
[edit]- ICAO recommendations on use of the International System of Units
- Index of aviation articles
- Acronyms and abbreviations in avionics
- Dashboard
- Cockpit
- Control stand
- Glass cockpit
References
[edit]- ^abcdefghijklInstrument Flying Handbook, 2001, FAA-H-8083-15,US Dept. of Transportation, Federal Aviation Administration, Flight Standards Service
- ^Aviation's Crazy, Mixed Up Units of Measure - AeroSavvy
- ^Mark Natola, ed. (2002).Boeing B-47 Stratojet.Schiffer Publishing Ltd. p. 46.ISBN0764316702.
- ^Williamson, G. W. (19 August 1937)."Instrument Planning: The New Service Blind-Flying Panel Described".Flight.p. 193. Archived fromthe originalon 27 July 2014.Retrieved3 May2024.
- ^"Six Pack - The Primary Flight Instruments".LearnToFly.ca. 13 March 2010.Retrieved31 January2011.
External links
[edit]- Instrument Flying Handbook 2012
- Pilot's Handbook of Aeronautical Knowledge(FAA-H-8083-25A)2008
- The Gyro Horizon Enables Instrument FlyingA history of how aircraft instrumentation was developed with an emphasis on the gyro horizon. 2007
- "How Aircraft Instruments Work."Popular Science,March 1944, pp. 116–123/192.
- Current Practice in Instrument Panel Layout – Aero Digest