International Organization for Standardization
Organisation internationale de normalisation | |
![]() | |
Abbreviation | ISO |
---|---|
Predecessor | International Federation of the National Standardizing Associations (ISA) |
Formation | 23 February 1947 |
Type | Non-governmental organization |
Purpose | International standardsdevelopment |
Headquarters | Geneva, Switzerland |
Membership | 170 members (39 correspondents and 4 subscribers)[1] |
Official languages |
|
President | Sung Hwan Cho |
Website | www |
TheInternational Organization for Standardization(ISO/ˈaɪsoʊ/[3]) is an independent,non-governmental,international standarddevelopment organization composed of representatives from the nationalstandards organizationsof member countries.[4]Membership requirements are given in Article 3 of the ISO Statutes.[5]
ISO was founded on 23 February 1947, and (as of July 2024[update]) it has published over 25,000 international standards covering almost all aspects of technology and manufacturing. It has over 800 technical committees (TCs) and subcommittees (SCs) to take care of standards development.[6]
The organization develops and publishesinternational standardsin technical and nontechnical fields, including everything from manufactured products and technology to food safety, transport, IT, agriculture, and healthcare.[6][7][8][9]More specialized topics likeelectricalandelectronic engineeringare instead handled by theInternational Electrotechnical Commission.[10]It is headquartered inGeneva,Switzerland.[6]The threeofficial languagesof ISO areEnglish,French,andRussian.[2]
Name and abbreviations
[edit]The International Organization for Standardization in French isOrganisation internationale de normalisationand in Russian,Международная организация по стандартизации(Mezhdunarodnaya organizatsiya po standartizatsii).
Although one might thinkISOis an abbreviation for "International Standardization Organization" or a similar title in another language, the letters do not officially represent anacronymorinitialism.The organization provides this explanation of the name:
Because 'International Organization for Standardization' would have different acronyms in different languages (IOS in English, OIN in French), our founders decided to give it the short formISO.ISOis derived from the Greek wordisos(ίσος,meaning "equal" ). Whatever the country, whatever the language, the short form of our name is alwaysISO.[6]
During the founding meetings of the new organization, however, the Greek word explanation was not invoked, so this meaning may be afalse etymology.[11]
Both the nameISOand the ISO logo are registered trademarks and their use is restricted.[12]
History
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/c/c0/Memory_plaque_of_founding_ISA_in_Prague_cropped.jpg/260px-Memory_plaque_of_founding_ISA_in_Prague_cropped.jpg)
The organization that is known today as ISO began in 1926 as theInternational Federation of the National Standardizing Associations(ISA), which primarily focused onmechanical engineering.The ISA was suspended in 1942 duringWorld War IIbut, after the war, the ISA was approached by the recently-formedUnited NationsStandards Coordinating Committee (UNSCC) with a proposal to form a newglobal standardsbody.[13]
In October 1946, ISA and UNSCC delegates from 25 countries met in London and agreed to join forces to create the International Organization for Standardization. The organization officially began operations on 23 February 1947.[14][15]
ISO Standards were originally known asISO Recommendations(ISO/R), e.g., "ISO 1"was issued in 1951 as" ISO/R 1 ".[16]
Structure and organization
[edit]ISO is a voluntary organization whose members are recognized authorities on standards, each one representing one country. Members meet annually at a General Assembly to discuss the strategic objectives of ISO. The organization is coordinated by a central secretariat based inGeneva.[17]
A council with a rotating membership of 20 member bodies provides guidance and governance, including setting the annual budget of the central secretariat.[17][18]
The technical management board is responsible for more than 250technical committees,who develop the ISO standards.[17][19][20][21]
Joint technical committee with IEC
[edit]ISO has a joint technical committee (JTC) with theInternational Electrotechnical Commission(IEC) to develop standards relating toinformation technology(IT). Known asJTC 1and entitled "Information technology", it was created in 1987 and its mission is "to develop worldwideInformation and Communication Technology(ICT) standards for business and consumer applications. "[22][23]
There was previously also a JTC 2 that was created in 2009 for a joint project to establish common terminology for "standardization in the field of energy efficiency and renewable energy sources".[24]It was later disbanded.
Membership
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/f/f2/ISO_Members_2020.svg/220px-ISO_Members_2020.svg.png)
As of 2022[update],there are 167national membersrepresenting ISO in their country, with each country having only one member.[6][25]
ISO has three membership categories,[1]
- Member bodiesare national bodies considered the most representative standards body in each country. These are the only members of ISO that have voting rights.
- Correspondent membersare countries that do not have their own standards organization. These members are informed about the work of ISO, but do not participate in standards promulgation.
- Subscriber membersare countries with small economies. They pay reduced membership fees, but can follow the development of standards.
Participating members are called "P" members, as opposed to observing members, who are called "O" members.
Financing
[edit]ISO is funded by a combination of:[26]
- Organizations that manage the specific projects or loan experts to participate in the technical work
- Subscriptions from member bodies, whose subscriptions are in proportion to each country'sgross national productand trade figures
- Sale of standards
International standards and other publications
[edit]International standards are the main products of ISO. It also publishes technical reports, technical specifications, publicly available specifications, technicalcorrigenda(corrections), and guides.[27][28]
International standards
- These are designated using the formatISO[/IEC] [/ASTM] [IS] nnnnn[-p]:[yyyy] Title,wherennnnnis the number of the standard,pis an optional part number,yyyyis the year published, andTitledescribes the subject.IECforInternational Electrotechnical Commissionis included if the standard results from the work of ISO/IEC JTC 1 (the ISO/IEC Joint Technical Committee).ASTM(American Society for Testing and Materials) is used for standards developed in cooperation withASTM International.yyyyandISare not used for an incomplete or unpublished standard and, under some circumstances, may be left off the title of a published work.
Technical reports
- These are issued when a technical committee or subcommittee has collected data of a different kind from that normally published as an International Standard,[27]such as references and explanations. The naming conventions for these are the same as for standards, exceptTRprepended instead ofISin the report's name.
For example:
- ISO/IEC TR 17799:2000 Code of Practice for Information Security Management
- ISO/TR 19033:2000 Technical product documentation – Metadata for construction documentation
Technical and publicly available specifications
- Technical specifications may be produced when "the subject in question is still under development or where for any other reason there is the future but not immediate possibility of an agreement to publish an International Standard". A publicly available specification is usually "an intermediate specification, published prior to the development of a full International Standard, or, in IEC may be a 'dual logo' publication published in collaboration with an external organization".[27]By convention, both types of specification are named in a manner similar to the organization's technical reports.
For example:
- ISO/TS 16952-1:2006 Technical product documentation – Reference designation system – Part 1: General application rules (later withdrawn and replaced by ISO/TS 81346-3:2012, which was later withdrawn)
- ISO/PAS 11154:2006 Road vehicles – Roof load carriers (later revised in ISO 11154:2023, which does not have the "PAS" abbreviation in its name)
Technical corrigenda
- When partnering with IEC in their joint technical committee, ISO also sometimes issues "technical corrigenda" (where "corrigenda" is the plural ofcorrigendum). These are amendments made to existing standards to correct minor technical flaws or ambiguities.[27]
ISO guides
- These are meta-standards covering "matters related to international standardization".[27]They are named using the format"ISO[/IEC] Guide N:yyyy: Title".
For example:
- ISO/IEC Guide 2:2004 Standardization and related activities – General vocabulary
- ISO/IEC Guide 65:1996 General requirements for bodies operating product certification (since revised and reissued as ISO/IEC 17065:2012 Conformity assessment — Requirements for bodies certifying products, processes and services).[29]
Document copyright
[edit]ISO documents have strict copyright restrictions and ISO charges for most copies. As of 2020[update],the typical cost of a copy of an ISO standard is aboutUS$120or more (and electronic copies typically have a single-user license, so they cannot be shared among groups of people).[30]Some standards by ISO and its official U.S. representative (and, via the U.S. National Committee, theInternational Electrotechnical Commission) are made freely available.[31][32]
Standardization process
[edit]A standard published by ISO/IEC is the last stage of a long process that commonly starts with the proposal of new work within a committee. Some abbreviations used for marking a standard with its status are:[33][34][35][36][37][38][39]
- PWI – Preliminary Work Item
- NP or NWIP – New Proposal / New Work Item Proposal (e.g., ISO/IEC NP 23007)
- AWI – Approved new Work Item (e.g., ISO/IEC AWI 15444-14)
- WD – Working Draft (e.g., ISO/IEC WD 27032)
- CD – Committee Draft (e.g., ISO/IEC CD 23000-5)
- FCD – Final Committee Draft (e.g., ISO/IEC FCD 23000-12)
- DIS – Draft International Standard (e.g., ISO/IEC DIS 14297)
- FDIS – Final Draft International Standard (e.g., ISO/IEC FDIS 27003)
- PRF – Proof of a new International Standard (e.g., ISO/IEC PRF 18018)
- IS – International Standard (e.g., ISO/IEC 13818-1:2007)
Abbreviations used for amendments are:[33][34][35][36][37][38][39][40]
- NP Amd – New Proposal Amendment (e.g., ISO/IEC 15444-2:2004/NP Amd 3)
- AWI Amd – Approved new Work Item Amendment (e.g., ISO/IEC 14492:2001/AWI Amd 4)
- WD Amd – Working Draft Amendment (e.g., ISO 11092:1993/WD Amd 1)
- CD Amd / PDAmd – Committee Draft Amendment / Proposed Draft Amendment (e.g., ISO/IEC 13818-1:2007/CD Amd 6)
- FPDAmd / DAM (DAmd) – Final Proposed Draft Amendment / Draft Amendment (e.g., ISO/IEC 14496-14:2003/FPDAmd 1)
- FDAM (FDAmd) – Final Draft Amendment (e.g., ISO/IEC 13818-1:2007/FDAmd 4)
- PRF Amd – (e.g., ISO 12639:2004/PRF Amd 1)
- Amd – Amendment (e.g., ISO/IEC 13818-1:2007/Amd 1:2007)
Other abbreviations are:[37][38][40][41]
- TR – Technical Report (e.g., ISO/IEC TR 19791:2006)
- DTR – Draft Technical Report (e.g., ISO/IEC DTR 19791)
- TS – Technical Specification (e.g., ISO/TS 16949:2009)
- DTS – Draft Technical Specification (e.g., ISO/DTS 11602-1)
- PAS – Publicly Available Specification
- TTA – Technology Trends Assessment (e.g., ISO/TTA 1:1994)
- IWA – International Workshop Agreements (e.g., IWA 1:2005)
- Cor – Technical Corrigendum (e.g., ISO/IEC 13818-1:2007/Cor 1:2008)
- Guide – a guidance to technical committees for the preparation of standards
International Standards are developed by ISO technical committees (TC) and subcommittees (SC) by a process with six steps:[35][42]
- Stage 1: Proposal stage
- Stage 2: Preparatory stage
- Stage 3: Committee stage
- Stage 4: Enquiry stage
- Stage 5: Approval stage
- Stage 6: Publication stage
The TC/SC may set upworking groups(WG) of experts for the preparation of a working drafts. Subcommittees may have several working groups, which may have several Sub Groups (SG).[43]
Stage code | Stage | Associated document name | Abbreviations |
|
---|---|---|---|---|
00 | Preliminary | Preliminary work item | PWI | |
10 | Proposal | New work item proposal |
|
|
20 | Preparatory | Working draft or drafts |
|
|
30 | Committee | Committee draft or drafts |
|
|
40 | Enquiry | Enquiry draft |
|
(CDV in IEC) |
50 | Approval | Final draft |
|
|
60 | Publication | International Standard |
|
|
90 | Review | |||
95 | Withdrawal |
It is possible to omit certain stages, if there is a document with a certain degree of maturity at the start of a standardization project, for example, a standard developed by another organization. ISO/IEC directives also allow the so-called "Fast-track procedure". In this procedure, a document is submitted directly for approval as a draft International Standard (DIS) to the ISO member bodies or as a final draft International Standard (FDIS), if the document was developed by an international standardizing body recognized by the ISO Council.[35]
The first step, a proposal of work (New Proposal), is approved at the relevant subcommittee or technical committee (e.g., SC 29 and JTC 1 respectively in the case of MPEG, theMoving Picture Experts Group). A working group (WG) of experts is typically set up by the subcommittee for the preparation of a working draft (e.g., MPEG is a collection of seven working groups as of 2023). When the scope of a new work is sufficiently clarified, some of the working groups may make an open request for proposals—known as a "call for proposals". The first document that is produced, for example, for audio and video coding standards is called a verification model (VM) (previously also called a "simulation and test model" ). When a sufficient confidence in the stability of the standard under development is reached, a working draft (WD) is produced. This is in the form of a standard, but is kept internal to working group for revision. When a working draft is sufficiently mature and the subcommittee is satisfied that it has developed an appropriate technical document for the problem being addressed, it becomes a committee draft (CD) and is sent to the P-member national bodies of the SC for the collection of formal comments. Revisions may be made in response to the comments, and successive committee drafts may be produced and circulated until consensus is reached to proceed to the next stage, called the "enquiry stage".
After a consensus to proceed is established, the subcommittee will produce a draft international standard (DIS), and the text is submitted to national bodies for voting and comment within a period of five months. A document in the DIS stage is available to the public for purchase and may be referred to with its ISO DIS reference number.[44]
Following consideration of any comments and revision of the document, the draft is then approved for submission as a Final Draft International Standard (FDIS) if a two-thirds majority of the P-members of the TC/SC are in favour and if not more than one-quarter of the total number of votes cast are negative. ISO will then hold a ballot among the national bodies where no technical changes are allowed (a yes/no final approval ballot), within a period of two months. It is approved as an International Standard (IS) if a two-thirds majority of the P-members of the TC/SC is in favour and not more than one-quarter of the total number of votes cast are negative. After approval, the document is published by the ISOcentral secretariat,with only minor editorial changes introduced in the publication process before the publication as an International Standard.[33][35]
International Workshop Agreements
[edit]International Workshop Agreements (IWAs) are documents that establish a collaboration agreement that allow "key industry players to negotiate in an open workshop environment" outside of ISO in a way that may eventually lead to development of an ISO standard.[41]
Products named after ISO
[edit]On occasion, the fact that many of the ISO-created standards are ubiquitous has led to common use of "ISO" to describe the product that conforms to a standard. Some examples of this are:
- Disk imagesending in thefile extension"ISO"to signify that they are using theISO 9660standard file system as opposed to another file system—hence disc images commonly being referred to as "ISOs".
- The sensitivity of a photographic film to light (its "film speed") is described byISO 6,ISO 2240,andISO 5800.Hence, the speed of the film often is referred to by its ISO number.
- As it was originally defined in ISO 518, the flashhot shoefound on cameras often is called the "ISO shoe".
- ISO 11783,the communication protocol for the agriculture industry, which is marketed as ISOBUS.
- ISO 13216,the standardized attachment points for child safety seats, which is marketed as ISOFIX.
- ISO 668,the standardized intermodal containers, sometimes called "ISO containers".
ISO awards
[edit]ISO presents several awards to acknowledge the valuable contributions made in the realm of international standardization:[45]
- The Lawrence D. Eicher Award:This award acknowledges outstanding standards development. It is available to all ISO and ISO/IEC technical committees.
- The ISO Next Generation Award:Aimed at young professionals from ISO member nations, this award highlights those who advocate for sustainability-centric standardization and emphasize the importance of partnerships.
- The ISO Excellence Award:Dedicated to recognizing the endeavors of ISO's technical professionals, any individual nominated as an expert, project leader, or convenor in a committee working group is eligible for this award.
Criticism
[edit]Except for a relatively small number of standards,[31]ISO standards are not available free of charge, but rather for a purchase fee,[46]which has been seen by some as unaffordable for smallopen-sourceprojects.[47]
The process of developing standards within ISO was criticized around 2007 as being too difficult for timely completion of large and complex standards, and some members were failing to respond to ballots, causing problems in completing the necessary steps within the prescribed time limits. In some cases, alternative processes have been used to develop standards outside of ISO and then submit them for its approval. A more rapid "fast-track" approval procedure was used inISO/IEC JTC 1for thestandardization of Office Open XML(OOXML, ISO/IEC 29500, approved in April 2008), and another rapid alternative "publicly available specification" (PAS) process had been used byOASISto obtain approval ofOpenDocumentas an ISO/IEC standard (ISO/IEC 26300, approved in May 2006).[48]
As was suggested at the time by Martin Bryan, the outgoing convenor (chairman) of working group 1 (WG1) ofISO/IEC JTC 1/SC 34,the rules of ISO were eventually tightened so that participating members that fail to respond to votes are demoted to observer status.
The computer security entrepreneur andUbuntufounder,Mark Shuttleworth,was quoted in aZDNetblog article in 2008 about the process of standardization of OOXML as saying: "I think it de-values the confidence people have in the standards setting process", and alleged that ISO did not carry out its responsibility. He also said thatMicrosofthad intensely lobbied many countries that traditionally had not participated in ISO and stacked technical committees with Microsoft employees, solution providers, and resellers sympathetic to Office Open XML:[49]
When you have a process built on trust and when that trust is abused, ISO should halt the process... ISO is an engineeringold boys cluband these things are boring so you have to have a lot of passion... then suddenly you have an investment of a lot of money and lobbying and you get artificial results. The process is not set up to deal with intensive corporatelobbyingand so you end up with something being a standard that is not clear.
See also
[edit]- Countries in the International Organization for Standardization– Members of ISO
- Ecma International– Standards organization for information and communication systems
- European Committee for Standardization(CEN) – Standards organization
- Global Reporting Initiative– International standards organization – for sustainability information and linking up with reporting on their 17#GlobalGoalsindicators
- GOST– CIS technical standards – a set of technical standards maintained by the Euro-Asian Council for Standardization, Metrology, and Certification
- IEEE Standards Association– Operating unit within IEEE
- Institute of Environmental Sciences and Technology
- Interface 2010– the Interface Marketing Supplier Integration Institute
- International Classification for Standards– Classification system for technical standards
- The International Customer Service Institute– International partnership organisation for sharing of best practices in customer service
- International Electrotechnical Commission(IEC) – International standards organization
- International healthcare accreditation– International healthcare accreditation organisation
- International Telecommunication Union– Specialized agency of the United Nations
- Internet Engineering Task Force– Open internet standards organization
- List of ISO standards– List of standards by the International Organization for Standardization
- Standardization– Implementation of technical standards based on the consensus of different parties
- Standards organization– Organization that develops standards
- Terminology planning policy
ISO divisions
[edit]Some of the 834 Technical Committees of the International Organization for Standardization (ISO) include:[6]
- ISO/TC 37 -Language and terminology– Terminology and other language content resources
- ISO/TC 46 -Information and documentation- Libraries, archives, indexing and information science
- ISO/TC 68 -Financial services- Banking, securities and financial services
- ISO/TC 176 -Quality management and quality assurance
- ISO/TC 211 -Geographic information/Geomatics-Geographic data and information
- ISO/TC 215 -Health informatics-Health-related data/information
- ISO/TC 262 -Risk management-Risk management
- ISO/TC 289 -Brand evaluation-Brandevaluation and valuation
- ISO/TC 292 -Security and resilience- Security of society
References
[edit]- ^ab"ISO members".International Organization for Standardization.Archivedfrom the original on 24 January 2021.Retrieved17 November2020.
- ^ab"How to use the ISO Catalogue".International Organization for Standardization. Archived fromthe originalon 4 October 2007.
- ^Dare to dream BIG: Standards empower innovators (EN, ES, FR).ISO. 24 October 2016.Archivedfrom the original on 14 February 2022.Retrieved14 February2022.
- ^"ISO Membership Manual".ISO.Archivedfrom the original on 10 April 2022.Retrieved10 April2022.
- ^ISO Statutes(PDF)(in English, French, and Russian) (20th ed.).Geneva:International Organization for Standardization. 2022.ISBN978-92-67-02040-2.Archived(PDF)from the original on 31 March 2022.Retrieved12 April2022.
- ^abcdef"About ISO".ISO.Archivedfrom the original on 17 February 2023.
- ^"New 'net zero' standards could transform the climate – unless they're derailed".The Washington Post.Archivedfrom the original on 2 February 2022.Retrieved18 March2022.
- ^"Health sector standards".ISO.6 April 2023.Retrieved28 January2024.
- ^"Transport sector standards".ISO.20 January 2023.Retrieved28 January2024.
- ^Editors of Encyclopedia Britannica. 3 June 2021. "International Organization for Standardization".Archived12 April 2022 at theWayback Machine.Encyclopedia Britannica.Retrieved 2022-04-26.
- ^"Friendship among equals"(PDF).ISO.Archived(PDF)from the original on 14 March 2020.Retrieved8 March2020.(page 20)
- ^"ISO name and logo".ISO.Archivedfrom the original on 19 September 2012.
- ^"A Brief History of ISO".University of Pittsburgh.Archivedfrom the original on 27 April 2015.Retrieved12 June2014.
- ^Friendship among equals – Recollections from ISO's first fifty years(PDF),International Organization for Standardization, 1997, pp. 15–18,ISBN92-67-10260-5,archived(PDF)from the original on 26 October 2012
- ^Yates, JoAnne; Murphy, Craig N. (2006)."From setting national standards to coordinating international standards: The formation of the ISO"(PDF).Business and Economic History On-Line.4.Archived(PDF)from the original on 27 April 2021.Retrieved29 June2021.
- ^Tranchard, Sandrine (23 February 2017)."ISO celebrates 70 years".ISO.Archivedfrom the original on 20 October 2023.Retrieved10 August2023.
- ^abc"Structure and governance".International Organization for Standardization.Archivedfrom the original on 19 September 2012.
- ^"Council".International Organization for Standardization.Archivedfrom the original on 3 November 2012.
- ^"Technical committees".International Organization for Standardization.Archivedfrom the original on 19 September 2012.
- ^"Who develops ISO standards?".International Organization for Standardization.Archivedfrom the original on 19 September 2012.
- ^"Governance of technical work".International Organization for Standardization.Archivedfrom the original on 19 September 2012.
- ^"ISO/IEC JTC 1".International Organization for Standardization.Archivedfrom the original on 15 December 2011.
- ^"JTC 1 home page".ISO/IEC JTC 1.Archivedfrom the original on 15 May 2021.Retrieved15 May2021.
- ^"ISO/IEC JTC 2 Joint Project Committee – Energy efficiency and renewable energy sources – Common terminology".International Organization for Standardization. Archived fromthe originalon 6 October 2012.
- ^"ISO – Members".ISO.Archivedfrom the original on 24 January 2021.Retrieved18 November2020.
- ^"General information on ISO".ISO.Archivedfrom the original on 5 October 2007.
- ^abcdeThe ISO directives are published in two distinct parts:
- "ISO/IEC Directives, Part 1: Procedures for the technical work"(PDF).ISO/IEC. 2012. Archived fromthe original(PDF)on 13 June 2012.Retrieved17 July2012.
- "ISO/IEC Directives, Part 2: Rules for the structure and drafting of International Standards"(PDF).ISO/IEC. 2011. Archived fromthe original(PDF)on 16 October 2011.Retrieved17 July2012.
- ^ISO."ISO/IEC Directives and ISO supplement".Archivedfrom the original on 16 May 2008.
- ^ISO,ISO/IEC 17065:2012 Conformity assessment — Requirements for bodies certifying products, processes and servicesArchived3 October 2022 at theWayback Machine,published September 2012, revised 2018, accessed 3 October 2022
- ^"What Does ISO Certification Cost?".Reciprocity.11 November 2019.Archivedfrom the original on 21 November 2020.Retrieved13 November2020.
- ^ab"Publicly Available Standards".ISO. 19 October 2023.Archivedfrom the original on 13 October 2007.Retrieved17 December2007.
- ^"Free ANSI Standards".Archived fromthe originalon 3 April 2007.
- ^abc"About MPEG".chiariglione.org.Archivedfrom the original on 21 February 2010.
- ^abcISO."International harmonized stage codes".Archivedfrom the original on 4 October 2007.
- ^abcdefISO."Stages of the development of International Standards".Archivedfrom the original on 12 August 2007.
- ^abc"The ISO27k FAQ – ISO/IEC acronyms and committees".IsecT Ltd.Archivedfrom the original on 24 November 2005.
- ^abcISO (2007)."ISO/IEC Directives Supplement – Procedures specific to ISO"(PDF).Archived(PDF)from the original on 12 January 2012.
- ^abcISO (2007)."List of abbreviations used throughout ISO Online".Archivedfrom the original on 12 August 2007.
- ^abc"US Tag Committee Handbook"(DOC).March 2008.Archivedfrom the original on 17 February 2010.Retrieved1 January2010.
- ^abcISO/IEC JTC1 (2 November 2009),Letter Ballot on the JTC 1 Standing Document on Technical Specifications and Technical Reports(PDF),archived fromthe original(PDF)on 22 October 2021
- ^abISO."ISO deliverables".Archivedfrom the original on 12 August 2007.
- ^abISO (2022),ISO/IEC Directives, Part 1 – Consolidated ISO Supplement – Procedure for the technical work – Procedures specific to ISO(PDF),archived(PDF)from the original on 20 September 2022,retrieved16 September2022
- ^ISO, IEC (5 November 2009)."ISO/IEC JTC 1/SC 29, SC 29/WG 11 Structure (ISO/IEC JTC 1/SC 29/WG 11 – Coding of Moving Pictures and Audio)".Archived fromthe originalon 28 January 2001.Retrieved7 November2009.
- ^For example, ISO,ISO/DIS 10009: Quality management — Guidance for quality tools and their applicationArchived2 August 2023 at theWayback Machine,accessed 2 August 2023
- ^"ISO - ISO awards".ISO.Retrieved26 October2023.
- ^"Shopping FAQs".ISO.Archivedfrom the original on 5 October 2007.
- ^Jelliffe, Rick (1 August 2007)."Where to get ISO Standards on the Internet free".oreillynet.com.Archivedfrom the original on 24 November 2007.
The lack of free online availability has effectively made ISO standard irrelevant to the (home/hacker section of the) Open Source community.
- ^"Report on WG1 activity for December 2007 Meeting of ISO/IEC JTC1/SC34/WG1 in Kyoto".ISO/IEC JTC 1/SC 34.Archivedfrom the original on 12 August 2007.
- ^"Ubuntu's Shuttleworth blames ISO for OOXML's win".ZDNet.com. 1 April 2008. Archived fromthe originalon 4 April 2008.
Further reading
[edit]- Kuert, Willy (1997)."Friendship Among Equals – Recollections from ISO's first fifty years"(PDF).ISO.Archived(PDF)from the original on 26 October 2012.
- Yates, JoAnne;Murphy, Craig N. (Fall 2006)."Coordinating International Standards: The Formation of the ISO"(PDF).Archived(PDF)from the original on 22 September 2010.MIT Innovations and Entrepreneurship Seminar Series.
External links
[edit]![](https://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Official website
- Publicly Available Standards,with free access to a small subset of the standards.
- Advanced search for standards and/or projects
- Online Browsing Platform (OBP),access to most up to date content in ISO standards, graphical symbols, codes or terms and definitions.