Titanium hydride
 Titanium hydride powder
| |
| Names | |
|---|---|
| IUPAC name
titanium dihydride (hydrogen deficient)
| |
| Identifiers | |
| ECHA InfoCard | 100.028.843 |
PubChemCID
|
|
| UNII | |
CompTox Dashboard(EPA)
|
|
| Properties | |
| TiH2−x | |
| Molar mass | 49.88 g/mol (TiH2) |
| Appearance | black powder (commercial form) |
| Density | 3.76 g/cm3(typical commercial form) |
| Melting point | Decomposes |
| insoluble | |
Except where otherwise noted, data are given for materials in theirstandard state(at 25 °C [77 °F], 100 kPa).
| |
Titanium hydridenormally refers to theinorganic compoundTiH2and relatednonstoichiometricmaterials.[1][2]It is commercially available as a stable grey/black powder, which is used as an additive in the production ofAlnicosintered magnets, in the sintering of powdered metals, the production ofmetal foam,the production of powdered titanium metal and in pyrotechnics.[3]
Also known astitanium–hydrogen alloy,[4][5]it is analloy[6]oftitanium,hydrogen,and possibly other elements. When hydrogen is the main alloying element, its content in the titanium hydride is between 0.02% and 4.0% by weight. Alloying elements intentionally added to modify the characteristics of titanium hydride includegallium,iron,vanadium,andaluminium.
Production
[edit]In the commercial process for producing non-stoichiometricTiH2−x,titaniummetal spongeis treated with hydrogen gas at atmospheric pressure at between 300-500 °C. Absorption of hydrogen is exothermic and rapid, changing the color of the sponge grey/black. The brittle product is ground to a powder, which has a composition aroundTiH1.95.[3]In the laboratory, titanium hydride is produced by heatingtitanium powderunder flowing hydrogen at 700 °C, the idealized equation being:[7]
- Ti + H2→ TiH2
Other methods of producing titanium hydride include electrochemical and ball milling methods.[8][9]
Reactions
[edit]TiH1.95is unaffected by water and air.[citation needed]It is slowly attacked by strong acids and is degraded by hydrofluoric and hot sulfuric acids. It reacts rapidly with oxidizing agents, this reactivity leading to the use of titanium hydride in pyrotechnics.[3]
The material has been used to produce highly pure hydrogen, which is released upon heating the solid.[7]Hydrogen release in TiH~2starts just above 400 °C but may not be complete until the melting point of titanium metal.[10][3]Titaniumtritide(Ti3Hx) has been proposed for long-term storage oftritiumgas.[11]
Structure
[edit]AsTiHxapproaches stoichiometry, it adopts a distorted body-centered tetragonal structure, termed the ε-form with an axial ratio of less than 1. This composition is very unstable with respect to partial thermal decomposition, unless maintained under a pure hydrogen atmosphere. Otherwise, the composition rapidly decomposes at room temperature until an approximate composition ofTiH1.74is reached.[citation needed]This composition adopts the fluorite structure, and is termed the δ-form, and only very slowly thermally decomposing at room temperature until an approximate composition ofTiH1.47is reached, at which point, inclusions of the hexagonal close packed α-form, which is the same form as pure titanium, begin to appear.
The evolution of the dihydride from titanium metal and hydrogen has been examined in some detail. α-Titanium has ahexagonal close packed (hcp)structure at room temperature. Hydrogen initially occupies tetrahedral interstitial sites in the titanium. As the H/Ti ratio approaches 2, the material adopts the β-form to aface centred cubic (fcc),δ-form, the H atoms eventually filling all the tetrahedral sites to give the limiting stoichiometry ofTiH2.The various phases are described in the table below.
| Phase | Weight % H | Atomic % H | TiHx | Metal lattice |
|---|---|---|---|---|
| α | 0 – 0.2 | 0 – 8 | TiH0–TiH0.1 | hcp |
| α & β | 0.2 – 1.1 | 8 – 34 | TiH0.1–TiH0.5 | |
| β | 1.1 – 1.8 | 34 – 47 | TiH0.5–TiH0.9 | bcc |
| β & δ | 1.8 – 2.5 | 47 – 57 | TiH0.9–TiH1.32 | |
| δ | 2.7 – 4.1 | 57 – 67 | TiH1.32–TiH2 | fcc |
If titanium hydride contains 4.0% hydrogen at less than around 40 °C then it transforms into abody-centred tetragonal(bct) structure called ε-titanium.[12]
When titanium hydrides with less than 1.3% hydrogen, known as hypoeutectoid titanium hydride are cooled, the β-titanium phase of the mixture attempts to revert to the α-titanium phase, resulting in an excess of hydrogen. One way for hydrogen to leave the β-titanium phase is for the titanium to partially transform into δ-titanium, leaving behind titanium that is low enough in hydrogen to take the form of α-titanium, resulting in an α-titanium matrix with δ-titanium inclusions.
A metastable γ-titanium hydride phase has been reported.[13]When α-titanium hydride with a hydrogen content of 0.02-0.06% isquenchedrapidly, it forms into γ-titanium hydride, as the atoms "freeze" in place when the cell structure changes from hcp to fcc. γ-Titanium takes a body centred tetragonal (bct) structure. Moreover, there is no compositional change so the atoms generally retain their same neighbours.
Hydrogen embrittlement in titanium and titanium alloys
[edit]
The absorption of hydrogen and the formation of titanium hydride are a source of damage to titanium and titanium alloys. Thishydrogen embrittlementprocess is of particular concern when titanium and alloys are used as structural materials, as in nuclear reactors.
Hydrogen embrittlement manifests as a reduction inductilityand eventuallyspallingof titanium surfaces. The effect of hydrogen is to a large extent determined by the composition, metallurgical history and handling of the Ti and Ti alloy.[14]CP-titanium (commercially pure:≤99.55% Ti content) is more susceptible to hydrogen attack than pure α-titanium. Embrittlement, observed as a reduction in ductility and caused by the formation of a solid solution of hydrogen, can occur in CP-titanium at concentrations as low as 30-40 ppm. Hydride formation has been linked to the presence of iron in the surface of a Ti alloy. Hydride particles are observed in specimens of Ti and Ti alloys that have been welded, and because of this welding is often carried out under an inert gas shield to reduce the possibility of hydride formation.[14]
Ti and Ti alloys form asurface oxide layer,composed of a mixture ofTi(II),Ti(III)andTi(IV)oxides,[15]which offers a degree of protection to hydrogen entering the bulk.[14]The thickness of this can be increased byanodizing,a process which also results in a distinctive colouration of the material. Ti and Ti alloys are often used in hydrogen containing environments and in conditions where hydrogen is reduced electrolytically on the surface.Pickling,an acid bath treatment which is used to clean the surface can be a source of hydrogen.
Uses
[edit]Common applications includeceramics,pyrotechnics,sports equipment,as a laboratoryreagent,as ablowing agent,and as a precursor to porous titanium. When heated as a mixture with other metals inpowder metallurgy,titanium hydride releases hydrogen which serves to remove carbon and oxygen, producing a strong alloy.[3]
Thedensityof titanium hydride varies based on the alloying constituents, but for pure titanium hydride it ranges between 3.76 and 4.51 g/cm3.
Even in the narrow range of concentrations that make up titanium hydride, mixtures of hydrogen and titanium can form a number of different structures, with very different properties. Understanding such properties is essential to making quality titanium hydride. Atroom temperature,the most stable form of titanium is thehexagonal close-packed(HCP) structure α-titanium. It is a fairly hard metal that can dissolve only a small concentration of hydrogen, no more than 0.20 wt% at 464 °C (867 °F), and only 0.02% at 25 °C (77 °F). If titanium hydride contains more than 0.20% hydrogen at titanium hydride-making temperatures it transforms into abody-centred cubic(BCC) structure called β-titanium. It can dissolve considerably more hydrogen, more than 2.1% hydrogen at 636 °C (1,177 °F). If titanium hydride contains more than 2.1% at 636 °C (1,177 °F) then it transforms into a face-centred cubic (FCC) structure called δ-titanium. It can dissolve even more hydrogen, as much as 4.0% hydrogen 37 °C (99 °F), which reflects the upper hydrogen content of titanium hydride.[16]
There are many types ofheat treatingprocesses available to titanium hydride. The most common areannealingand quenching. Annealing is the process of heating the titanium hydride to a sufficiently high temperature to soften it. This process occurs through three phases:recovery,recrystallization,andgrain growth.The temperature required to anneal titanium hydride depends on the type of annealing. Annealing must be done under a hydrogen atmosphere to preventoutgassing.
See also
[edit]References
[edit]- ^Greenwood, Norman N.;Earnshaw, Alan (1997).Chemistry of the Elements(2nd ed.).Butterworth-Heinemann.ISBN978-0-08-037941-8.
- ^Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001.ISBN0-12-352651-5.
- ^abcdeRittmeyer, Peter; Weitelmann, Ulrich (2005). "Hydrides".Ullmann's Encyclopedia of Industrial Chemistry.Wiley-VCH.doi:10.1002/14356007.a13_199.ISBN978-3-527-30673-2.
- ^McQuillan, A. D. (22 December 1950)."An experimental and thermodynamic investigation of the hydrogen-titanium system".Proceedings of the Royal Society A.204(1078): 309–323.Bibcode:1950RSPSA.204..309M.doi:10.1098/rspa.1950.0176.S2CID135759594.Retrieved10 March2013.
- ^Bennett, L. H. (1980)."Nuclear magnetic resonance in alloys".MRS Proceedings.3.doi:10.1557/PROC-3-3.Retrieved10 March2013.
- ^Wang, Xin-Quan; Wang, Jian-Tao (15 June 2010)."Structural stability and hydrogen diffusion in TiHxalloys ".Solid State Communications.150(35–36): 1715–1718.Bibcode:2010SSCom.150.1715W.doi:10.1016/j.ssc.2010.06.004.Retrieved10 March2013.
- ^abM. Baudler "Hydrogen, Deuterium, Water" in Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 114-115.
- ^Millenbach, Pauline; Givon, Meir (1 October 1982)."The electrochemical formation of titanium hydride".Journal of the Less Common Metals.87(2): 179–184.doi:10.1016/0022-5088(82)90086-8.Retrieved10 March2013.
- ^Zhang, Heng; Kisi, Erich H (1997). "Formation of titanium hydride at room temperature by ball milling".Journal of Physics: Condensed Matter.9(11): L185–L190.Bibcode:1997JPCM....9L.185Z.doi:10.1088/0953-8984/9/11/005.ISSN0953-8984.S2CID250853926.
- ^Paulin, Irena; Donik, Črtomir; Mandrino, Djordje; Vončina, Maja; Jenko, Monika (January 2012)."Surface characterization of titanium hydride powder".Vacuum.86(6): 608–613.doi:10.1016/j.vacuum.2011.07.054.
- ^Brown, Charles C.; Buxbaum, Robert E. (June 1988). "Kinetics of hydrogen absorption in alpha titanium".Metallurgical Transactions A.19(6): 1425–1427.Bibcode:1988MTA....19.1425B.doi:10.1007/bf02674016.S2CID95614680.
- ^abFukai, Y (2005).The Metal-Hydrogen System, Basic Bulk Properties, 2d edition.Springer.ISBN978-3-540-00494-3.
- ^Numakura, H; Koiwa, M; Asano, H; Izumi, F (1988). "Neutron diffraction study of the metastable γ titanium deuteride".Acta Metallurgica.36(8): 2267–2273.doi:10.1016/0001-6160(88)90326-4.ISSN0001-6160.
- ^abcDonachie, Matthew J. (2000).Titanium: A Technical Guide.ASM International.ISBN978-0-87170-686-7.
- ^Lu, Gang; Bernasek, Steven L.; Schwartz, Jeffrey (2000). "Oxidation of a polycrystalline titanium surface by oxygen and water".Surface Science.458(1–3): 80–90.Bibcode:2000SurSc.458...80L.doi:10.1016/S0039-6028(00)00420-9.ISSN0039-6028.
- ^Setoyama, Daigo; Matsunaga, Junji; Muta, Hiroaki; Uno, Masayohi; Yamanaka, Shinsuke (3 November 2004). "Mechanical properties of titanium hydride".Journal of Alloys and Compounds.381(1–2): 215–220.doi:10.1016/j.jallcom.2004.04.073.
External links
[edit]
Media related toTitanium hydrideat Wikimedia Commons
