Withers
This articleneeds additional citations forverification.(August 2020) |
![](https://upload.wikimedia.org/wikipedia/commons/thumb/d/db/Withers.jpg/300px-Withers.jpg)
![](https://upload.wikimedia.org/wikipedia/commons/thumb/e/e8/Sch%C3%A9ma_Veau-tag.svg/220px-Sch%C3%A9ma_Veau-tag.svg.png)
![](https://upload.wikimedia.org/wikipedia/commons/thumb/9/99/Wiktionary-logo-en-v2.svg/40px-Wiktionary-logo-en-v2.svg.png)
Withersare the ridge between theshoulder bladesof an animal, typically aquadruped.In many species, this ridge is the tallest point of the body. In horses and dogs, it is the standard place to measure the animal's height. In contrast,cattleare often measured to the top of the hips.
The term (pronounced/ˈwɪð.ərz/) derives fromOld Englishwither( "against'), because the withers are the part of adraft animalthat pushes against aload.[1][2]
Horses
[edit]The withers inhorsesare formed by the dorsal spinal processes of roughly the 3rd through 11ththoracic vertebrae,which are unusually long in this area. Most horses have 18 thoracic vertebrae. The processes at the withers can be more than 30 centimetres (12 in) long.
Since they do not move relative to the ground as the horse's head does, the withers are used as the measuring point for the height of a horse. Horses are sometimes measured inhands– one hand is 4 inches (10.2 cm). Horse heights are extremely variable, from small pony breeds to large draft breeds. The height at the withers of an averagethoroughbredis 163 centimetres (16.0 hands; 5 ft 4 in), andponiesare up to 147 centimetres (14.2 hands; 4 ft 10 in).
Conformational issues
[edit]The withers of the horse are considered in evaluating conformation. Generally, a horse should have well-defined withers, as they are considered an important attachment point for the muscles of the torso. Withers of medium height are preferred, as high withers make it difficult to fit a saddle and are often associated with a narrow chest, and low withers (known as "mutton withers" ) do not provide a ridge to help keep the saddle in place.
More importantly, the dorsal spinal processes provide an attachment for the muscles that support the shoulder and neck. Horses do not have aclavicle,so the shoulder can freely rotate backwards. If the vertebrae of the withers are long front-to-back, the shoulder is freer to move backwards. This allows for an increase of stride length. thus increasing the horse's speed. It is also important in jumping, as the shoulder must rotate back for the horse to bring its foreleg parallel to the ground, which will then raise the animal's knees upward and get the lower part of the forelegs out of the way. Therefore, the withers have a direct impact on one of the most important points ofconformation:the shoulder.
Dogs
[edit]Indogs,the height of the withers is often used to determine the dog's jump height in variousdog sports.[3]It is also often a determining factor in whether the dog conforms to the show-qualitystandardsfor itsbreed.
References
[edit]- ^Partridge, Eric (May 23, 2006).Origins: A Short Etymological Dictionary of Modern English.Routledge.ISBN9781134942176– via Google Books.
- ^"Whither the Withers on a Horse?".Kentucky Equine Research.November 20, 2014.
- ^Coile, D. Caroline (18 April 2011).Pit Bulls For Dummies.John Wiley & Sons. p. 122.ISBN978-1-118-06937-0– via Google Books.