Abhay IFV
Abhay | |
---|---|
![]() Mild steel prototype of the Abhay | |
Type | Infantry Combat Vehicle |
Place of origin | India |
Production history | |
Designer | DRDO |
Designed | ~1997 - 2008 |
Manufacturer | DRDO |
No.built | 2 |
Specifications | |
Mass | 23 tons (25 tons with ERA) |
Crew | 3 (commander, driver, gunner) 7 Troops |
Main armament | 1 ×40 mm L/70 autocannon(210 rounds) |
Secondary armament | 1 × 30 mmAGS-17 7.62 mmPKTcoaxialmachine gun 2 ×BELATGMor9M133 KornetATGM |
Engine | Greaves CottonTD2V8 diesel engine 410 kW (550 hp) |
Power/weight | 24 hp/ton |
Transmission | Full automatic gearbox |
Suspension | Hydropneumatic suspension |
Operational range | 400 km |
Maximum speed | 35 km/h (cross country) 70 km/h (road) |
Abhay(Sanskrit:अभय,"Fearless") was anInfantry Combat Vehiclecreated under a tech-demonstration program started inIndiaby theDefence Research and Development Organisationor DRDO. As its first IFV project, Abhay was designed to provide experience in the construction ofAFVcomponents to DRDO, serve as a replacement to India's vast BMP fleet used in itsMechanised Infantry Regiments(changed later on), and serve as a test bed for weapons and systems to be used on future vehicles, as well as to be a reference for the designs of future vehicles.
A majority of the systems on the vehicle were indigenously (locally) developed as projected, excluding 3/4 weapons systems and the engine.[1]
The program began in the mid-1990's. By 2003, the development of the firstMild Steelprototype was completed and the development of the first armoured prototype was in progress. By 2004, various stages of the vehicle were in the advanced stages of development. By 2005, the first prototype was integrated and tested with indigenous components and the second one was either completed or undergoing testing. By 2008, the Abhay program was officially declared successfully completed by DRDO in theMinistry of DefenceAnnual Report of 2007–2008.[2][3][4][1]
Allegedly,Mr. M Natarajan,at the time recently appointed Director General of DRDO, stated about the Abhay in 2004: "The Abhay is under development. We see it as the future infantry combat vehicle for the Army. It will be a replacement for the Russian made BMPs that the Army has. It should be ready in two years."[5]This was not clarified later on for unknown reasons and the BMP fleet is yet to be replaced with the FICV program in progress.
History
[edit]In 1975, theIndian Governmentappointed an expert panel to undertake a long-term perspective plan for the army. The committee, also called the Krishna Rao Committee Report. was headed by Lieutenant General (later General)K.V Krishna Rao.It was mandated to present a perspective till 2000. It was required to evaluate national security threats, propose a strategy against it, visualise the future battlefield, determine the size of the army and suggest an incremental build-up of forces. 40 Wide-ranging discussions were carried out by the committee with a number of agencies.[6]
The report followed-up on the limited mechanisation of the army that had begun in 1969 with the induction ofTOPASandSKOTarmoured personnel carriers. As a result of the recommendations of the report, theMechanised Infantry Regimentequipped with theBMP-Iwas raised 2 April 1979. The real impact of the recommendations was felt whenKrishnaswamy Sundarjitook over asChief of the Army Staffin 1986. At the end of his tenure in 1988, over 23Mechanised Infantry Regimentswere raised equipped with at the time state-of-the-artBMP-2ICVs. The offensive potential of Indian armour was augmented by the availability of world-class technology from the Soviet Union of theBMP-1/BMP-2ICVs. The changes post-1975, which eventually gained pace in the 1980s, were supported by technological advances, especially related to the ICV platform.[6]
Around a decade later most of the shortcomings of the BMP were known and experienced by the army. It possessed limited all-around protection only up to 12.7mm rounds at best, had not yet been reequipped for night operations, the autocannon had large spread and the default soviet armor piercing rounds were not able to reliably penetrate better armored modern ICVs, mine protection was not particularly good, etc.[7]
Due to these issues with the currently deployed ICVs eventually needing to be fixed in some way, and the push for self-reliance following the dissolution of the soviet union,DRDOwas handed the task of forwarding the aforementioned objectives sometime after 1993, initiating the development of the technology demonstrator that would be named Abhay. Development suffered delays from 1998 to 1999 due to the sanctions imposed onIndiaby multiple countries in consequence ofPokhran-IInuclear tests conducted that year.[8]According to Indian Ministry of Defence annual reports released from 2003 to 2008, development of the mild steel hull prototype was completed by 2003, and was being used for testing the automotive systems of the Abhay. The development of the armoured steel prototype was in progress at the same time. By 2004, various stages of the vehicle were in the advanced stages of development, and by 2005 the armoured prototype of the Abhay was complete, using indigenously developed automotive and weapon systems, and armour. In 2008, DRDO stated about the Abhay:[4][3][2][1]
"The multi-disciplinary, multi-laboratory, Technology Demonstration Programme for development of Infantry Combat Vehicle (ICV) Abhay, has been successfully completed during the year having realized two prototypes. The successful development programme has imparted a boost to the self-reliance in defence technology. The technologies developed under this programme, such as fire control system, composite armour, hydro-pneumatic suspension and host of other automotive and armament sub-systems can be adopted for futuristic ICV and light tracked vehicle projects."[1]Only two prototypes were made of the Abhay, a mild steel prototype and an armoured prototype.[1]
As of 14 January 2024, DRDO has worked withL&Tto develop and test theZorawar light tank,the first batch of which is to be delivered to the army in April 2024. The tank uses some of the systems developed on the Abhay, such as an Integrated Fire Suppression System orIFSS.[9]
Design
[edit]Because the development of the Abhay required several technologies in the fields of materials, electronics, instrumentation, armaments, etc. MultipleDRDOlaboratories were involved in the development of this ICV. These were:[10]
- IRDE- Development of instruments (gunner and commander sights, periscopes)
- ARDE- Development of the armament system
- DMRL- Development of composite armour
- HEMRL- Development of ammunition
- CFEES- Development of the IFSS
- DEBEL- Development of the Ergonomic layout
- CVRDE- Consultancy on all aspects of development
- DLJ- Development of electronic protection systems (Laser Warning System)
VRDEcarried out the basic design and development of hull and turret envelopes,power pack,running gear,suspension, electronics, automotive systems, system integration, and testing.[10]
Hull
[edit]The hull on both prototypes housed automotive, armament, and running gear systems as well as the turret basket. Out of two prototypes, the first prototype was made from mild steel, whereas the second prototype was made from locally-developed compound steel.[10]The development of the hull helpedDRDOin understanding how to create an armoured hull through edge preparation, specialised welding and armour bending techniques.DRDOlaboratoryDefence Bioengineering and Electromedical Laboratory(DEBEL) based inBengalurudesigned theergonomicallayout of Abhay.[11]
Turret
[edit]The mild steel prototype used a polygonal shaped turret with sloped armor all around to increase protection by decreasing penetration.[10]For the armoured prototype, a rounded turret was made with the same composite armor as the hull again to increase protection by decreasing penetration.[10]The turret accommodated the gunner and commander housing the electronics and mechanics related to both roles i.e primary and secondary armament systems, sights and monitors,fire control system,etc. Both turrets had suspended light-weight turret baskets, and both the commander and gunner had adjustable seats. Bearing meshed with pinion gear helped in turret traverse and was driven by lightweight precision servo gear drives.Stabilizationof the turret was provided through a turret lock when required.[10]
Instrumentation
[edit]Multiple instruments were indigenously developed by IRDE for the Abhay, including but not limited to:[10]
- Gunners Main Sight
An integrated,stabilizedday sight complemented by athermal imagerandlaser range finderwith a built-in fire control computer. All the technologies involved and the components used are critical in nature. A modular concept was adapted to realise complete the system.[10]
- Commanders Thermal Moniter
The thermal monitor, a multi-functional display, facilitates the commander to view targets through thermal imaging as the gunner would. This thermal moniter uses keys to change settings instead of a touch screen common in modern vehicles.[10]
- Commanders Day Periscope
Provides a secondary way of surveillance and target designation to the commander when the commanders hatch is closed.[10]
- Driver's passive night periscope.
Provides night driving capability to the driver when the usage of lights is unavailable. It is based on image intensification technology using a second-generation image intensifier tube, a fast optical system as OG(?), and a binocular eye piece for comfortable vision.[10]
- Fire Control Computer
TheFire Control Computer(FCC) providesballisticoffsets to the gun in azimuth and elevation for different ammunition types based upon the range and environmental conditions. The FCC console enables the gunner to key in ammunition type, range, meteorological parameters, mean point of impact, andbore sightingrange, etc. before calculating precise offset.[10]
- Muzzle Bore Sight
Modified from the existing TXP-1-515 sight used for the BMP-2 to accurately perform the same function on the larger 40mmautocannonof the Abhay.[10]
Protection
[edit]The protection rating of the Abhay was an essential topic, as compared to the BMP-2, its replacement (later on the FICV program) would need much better protection against mines, small arms fire, shell fragments, and other most probably threats it would face. Therefore, the protection of the Abhay was ensure through multiple layers and systems.[10]
- Armour
The second of two prototypes (the first one was only for testing automotive systems) had all around protection against small arms and frontal protection from medium caliber cannons. It was developed using compound steel, behind which lay a recently indigenously developed composite armor consisting of multi-ceramic armor, high-hardness steel armor, titanium armor, dual hardnessspaced armor,and anti-fragment armor at various locations. This led to a weight reduction of more than 40% in comparison with steel for equivalent protection. More than 300 armour components were fabricated to specific shapes, sizes and configurations to be made and tested on the armoured prototypes.[10]
- ERA
A lighter impact version of Explosive Reactive Armor (ERA) with mounting fixtures was developed for the Abhay, which offered protection without any damage to the hull armour of the Abhay.[10]
- NBC Protection System
ThisNBC(Nuclear, Biological, Chemical) protection system is the same as the modernised one which was tested and developed for the BMP-2. It consists of aRadiationDetection Measurement and Control (RADMAC) Unit, Automatic Control Unit (ACU), Blower Control Unit (BCU) and is automated.
- Integrated Fire Suppression System
An IntegratedFire Suppression System(IFSS) was developed for the Abhay to protect the ICV from fires in the engine and crew compartment. It comprises the Main Control Unit (MCU),IRDetection Units,Automatic Fire Extinguisher(AFE),Portable Fire Extinguisher(PFE), Electrical Pyro Cartridge, Linear Thermal Detection, Alarm Unit (AU), Emergency Switch Unit (ESU),Cable Harness,andIFSSSystem software.[10]
- Laser Warning System
The Abhay also features aLaser Warning Systemwhich reduces the ICVs vulnerability tolaser guided weaponsby providing visual and auditory of any laser guided threats to the crew for the timely initiation of countermeasures.[10]
Firepower
[edit]The Abhay features vastly improved firepower over the BMP-2 to better fit the requirements of a modern ICV. It has anti-air as well as anti-armor capabilities and an indigenousFCS.[10][4]
Armament
[edit]Primary Armament:
Two primary weapons, a 40 mm autocannon and a twin ATGM launcher.
- Bofors 40 mm L/70autocannonfire on closing, self-ejectingcartridgegun with a recoil-operated autoloader using a 40x365mmRcartridgewith 3rate of firemodes - 240 rounds/min, 300 rounds/min, 330 rounds/min.[12]On the Abhay, the Bofors 40mm L/70autocannonis fed rounds through a two column feed and ejection/replenishment system allowing for the gun to be use two types of rounds without the need to change any ammunition belts.[13][14]It is capable of firing 40 mmAPFSDSrounds for armored targets as well asHErounds for soft targets and bunkers with theAPFSDSrounds being able to penetrate 100mmRHAat a range of 1000m/1 km.[10]The barrel is progressively rifled, indigeniously developed for the first time in the country for a low calibre gun.[14]
- TwinATGMlauncher capable of carrying and firing theBELmodifiedMilanATGMwith an improved range of 3000m/3 km (possibly up to 4000m).[4]It has space for two missiles placed side by side over two guide rails, which in turn are mounted onto the right side of the turret roof.[10]The launcher system was also tested with the9M133 KornetATGM.
Secondary Armament:
Two secondary weapons, an automatic grenade launcher 17 and a co-axial 7.62 mm machine gun.[14][10]
- Automatic Grenade Launcher 17(Russian Designation AGS-17 "Plamya" ), which uses a 30x29 mmcartridgefor 30 mmgrenades,with a standardrate of fireof 400 rounds/min with an effective firing range of 800 to 1,700 m. The feed system uses a 29 grenade belt.
- 7.62 mmsolenoid-firedco-axialPKT machine gunwith a standardrate of fireof 100 rounds/min, and a 250-round magazine. The PKT has a highermuzzle velocityand highercyclic rate of firethen otherPK machine gunvariants. It can fire 500 rounds in rapid fire scenarios before meltdown.
Fire Control System
[edit]Equipped with an all-electricFCSand stabilisation of the turret developed in association with private sector industry (possiblyBEL), the purpose of the all-electric FCS is to position the 40 mm main gun on the ICV on target with the correctazimuthandelevation,and to provide twin-axis stabilisation to the weapon platform against external disturbances.[15]
The whole system is anelectromechanicalsystem, using brush-less drives with backlash free elevation and traverse gearboxes coupled to turret ring for rotation inazimuth[15]The system employs vector control technology implemented through digital controllers andinsulated gate bipolar transistorbased power amplifiers for control of the stabiliser. It uses state-of-the-art fibre optic gyros as feedback elements to receive input on vehicle speed to apply the correct amount of stabilisation. The system has an interface for live connection and interaction with theFire Control SystemandBattlefield Management System,using a combined day and night sight integrated with aLaser Range Finderfor the purpose of automatically ranging the distance to a target. The whole system has excellent accuracy levels comparable with contemporary systems.[15]
The finished system was tested using both prototypes on cross-country terrain and successfully test fired all armaments on static targets. Being an indigenous development, the FCS can be configured as required to work on similar weapons/allied platforms.[15]
Salient Features
[edit]Source:[15]
- Provides fire on move capability
- Operates in various modes, viz., self-stab and sight-master mode
- Inbuilt provision for equipment testing
- Interlocks for safe operation
- Dual control through gunner and commander joysticks with override facility to commander
Technical Specifications
[edit]Source:[15]
- Traverse and elevation rates
- Max.: 40o/s
- Min.: 0.04o/s
- Stabilisation: 0.8 mil/s (1s)
- Acceleration: >50o/s2
- Drift Rate: <0.1mil/s
Mobility
[edit]All of the Abhay's automotive systems excluding the Engine are indigenous projects.[2][4][1]
Engine
[edit]The engine used to power the Abhay is the Greaves Cotton TD2V8 550horsepowerturbocharged diesel engine with apower-to-weight ratioof 24horsepower per tonne(24 hp/tonne), able to push the vehicle to an on-road speed of 70 km/h, cross-country speed of 35 km/h, and a cruising range of 400 km.[16][10]
Power pack
[edit]Power Pack:Abhay ran on a 550 hp indigenousturbochargeddiesel enginewithHydro Mechanical Power Transmission(HMPT)-500-3EC fully automatic cross-drive transmission of M/sDavid Brown, UK.It has six forward and two reverse speeds. A new cooling system comprising radiator core, after cooler core, transmission oil cooler,hydraulic oilcooler core, cooling fan, andhydraulicdrives was indigenously designed and developed. The compact cooling system with hydraulic drives is capable of withstanding temperatures ranging from -10 degree Celsius to +55 degree Celsius. The steering and brake system integrated withautomatic transmissionwere controlled through indigenously developed actuation system and linkage mechanism. An indigenous Power Distribution System (PDU) distributed power to the compressor, generator, cooling fan, etc. Lightweightfinal drivesoffset using aluminium casings were also developed indigenously.[10]
Suspension system
[edit]The hydro strut suspension of Abhay utilised the proven advantages of a pneumatic spring. Abhay's hydrodampercan be adapted to both tracked vehicles. The damper is inbuilt in this form ofsuspension.The hydro strutsuspensionoffers better ride comfort and exceptional cross-country mobility. The static load capacity of each suspension is 1.4 ton to 1.9 ton with wheel travel up to 400 mm, and bounce and rebound of 300 mm and 100 mm, respectively.[10]
The technologies used during the development of the hydro gas suspension system include surface finishing and surface coating techniques, sealing materials, manufacturing techniques for seals, test cycles, and testing procedure.[10]
Running Gear System
[edit]The indigenously developed running gear system system of the Abhay comprises a double pin, and rubber track with a central horn.[9]
Theaxlearms,sprockets,idler wheels,road wheels, and track tension mechanism have also been indigenously designed and developed.[10]
Advance Automotive Dashboard
[edit]An indigenous advance automotive dashboard with various sensors was developed and integrated on the vehicle. The dashboard was interfaced withGPS systemfor navigation. It acquires inputs on various parameters from engine, transmission, and troops' compartments and displays it on the front panel. The front end display shows selectable vehicle parameters such as vehicle speed, engine speed, engine/gearboxoil pressure,temperature, etc. The system checks all vehicle parameters and generates appropriate messages. It also records the cumulative values of important parameters, and schedule of periodic maintenance. The system continuously compares sensors inputs of critical parameters with threshold limits and gives audio/visual warning whenever any parameter goes out of specified range.[10]
Vehicles of Comparable role, size and era
[edit]See also
[edit]- List of modern AFVs
- BMP-3– (Soviet Union, Russia)
- M2 Bradley– (United States)
- TATA Kestrel– (India)
- ZBD04– (China)
- Bionix AFV– (Singapore)
References
[edit]- ^abcdef"Ministry of Defence Annual Report 2007-2008"(PDF).Retrieved14 January2023.
- ^abc"Ministry of Defence Annual Report 2002-2003"(PDF).Retrieved14 January2024.
- ^ab"Ministry of Defence annual Report 2003-2004"(PDF).Retrieved14 January2024.
- ^abcde"Ministry of Defence Annual Report 2004-2005"(PDF).Retrieved14 January2024.
- ^"Abhay".www.globalsecurity.org.Retrieved2 February2024.
- ^abChadha, Vivek."An Assessment of Organisational Change in the Indian Army"(PDF).idsa.in.Retrieved14 January2024.
- ^"BMP-1",Wikipedia,5 December 2023,retrieved14 January2024
- ^"India's Futuristic Infantry Combat Vehicle: Abhay IFV".15 March 2023.Retrieved14 January2024.
- ^ab"DRDO starts trials of light tank Zorawar, to hand over project to Army in months".India Today.Retrieved14 January2024.
- ^abcdefghijklmnopqrstuvwxyzaaab"Technologies for Light Armoured Tracked Vehicles"(PDF).August 2009. Archived fromthe original(PDF)on 24 August 2009.Retrieved14 January2024.
- ^DRDO's Life saving products save foreign exchange tooArchived7 October 2008 at theWayback Machine,FIDSNS,30 August 2007
- ^"Bofors 40 mm Automatic Gun L/70",Wikipedia,12 October 2023,retrieved14 January2024
- ^"Dr. Shailendra V Gade | Defence Research and Development Organisation - DRDO, Ministry of Defence, Government of India".www.drdo.gov.in.Retrieved14 January2024.
- ^abc"Armament System for ICV- ABHAY | Defence Research and Development Organisation - DRDO, Ministry of Defence, Government of India".www.drdo.gov.in.Retrieved14 January2024.
- ^abcdef"All Electric Type Weapon Control System for ICV | Defence Research and Development Organisation - DRDO, Ministry of Defence, Government of India".www.drdo.gov.in.Retrieved14 January2024.
- ^"The Indian Abhay Infantry Fighting Vehicle".TankNutDave.com.Retrieved14 January2024.
External links
[edit]- DRDO Techfocus on Abhay IFV
- Abhay IFVat GlobalSecurity.org