Multichannel Television Sound

This article is about an American analog television standard for sound multiplex. For the secondary audio feed on television in general, seeSound multiplex in broadcasting.

"BTSC" redirects here. For the Thai transport company, seeBangkok Mass Transit System.

Multichannel Television Sound(MTS) is the method of encoding three additionalaudio channelsintoanalog4.5 MHzaudiocarriersonSystem MandSystem N.It was developed by the Broadcast Television Systems Committee, an industry group, and sometimes known asBTSCas a result.

MTS worked by adding additional audio signals in otherwise empty portions of the television signal. MTS allowed up to a total of four audio channels. Normally two were broadcast to produce the left and right stereo channels. An additionalsecond audio program(SAP), could be used to broadcast other languages or entirely different audio like weather alerts that could be accessed by the user, typically through a button on theirremote control.The fourth channel,PRO,was only used by the broadcasters.

History

Initial work on design and testing of a stereophonic audio system began in 1975 when Telesonics approachedChicagopublic television stationWTTW.WTTW was producing a music show titledSoundstageat that time, and wassimulcastingthe stereo audio mix on localFMstations. Telesonics offered a way to send the same stereo audio over the existing television signals, thereby removing the need for the FM simulcast.

Telesonics and WTTW formed a working relationship and began developing the system which was similar to FM stereo modulation. Twelve WTTW studio and transmitter engineers added the needed broadcast experience to the relationship. The Telesonics system was tested and refined using the WTTW transmitter facilities on theSears Tower.

In 1979, WTTW had installed a stereoGrass Valleymaster control switcher and had added a second audio channel to themicrowaveSTL (Studio Transmitter Link). By that time, WTTW engineers had further developed stereo audio onvideotape recordersin their plant, using split audio track heads manufactured to their specifications, outboard record electronics, andDolby noise reductionthat allowedSoundstageto be recorded and electronically edited. In addition, anAmpexMM1100, 24-track audio recorder was also used for music production and mixing.PBSmember stations who wished to deliverSoundstagein stereo were provided with a four-track (left, right, vertical drive, andtime code) audiotape that could be synced with the video machines in those cities.

During the FCC approval process, several manufacturers applied to the FCC for consideration. Most notably theElectronic Industries Alliance(EIA) and Japanese EIA asked to be included in order to represent their members in the testing and specification phases of the approval process. WTTW engineers helped set standards forfrequency response,separation, and other uses of the spectrum. They also provided program source material used for the testing and maintained the broadcast chain. A3M24-track audio recorder was used to allow the selection of 12 different stereo programs for testing. TheMatsushitaQuasar TV manufacturing plant and laboratory, just west of Chicago, was used as the source for all testing of the competing systems. Following the testing, several questions were raised about the validity of some of the tests, and a second round of testing began.

WTTW installed a Broadcast Electronics prototype stereo modulator in October 1983 and began full-time broadcasting in stereo at that time using the Telesonics system prior toFederal Communications Commission(FCC) rule-making on the BTSC system. MTS was officially adopted by the FCC on 23 April 1984. Following EIA and FCC recommendations, the BE modulator was modified to meet BTSC specifications, and by August 1984 was in full-time use on WTTW.

Sporadic network transmission of stereo audio began on NBC on July 26, 1984, withThe Tonight Show Starring Johnny Carson,although at the time only the network's New York City flagship station,WNBC,had stereo broadcast capability;regular stereo transmission of NBC programs began during early 1985. ABC and CBS followed suit in 1986 and 1987, respectively.FOXwas the last network to join in 1987, with the four networks having their entire prime-time schedules in stereo by late 1994 (The WBandUPNlaunched the following season with their entire line-ups in stereo). One of the first television receiving systems to include BTSC capability was theRCA Dimensia,released in 1984.

From 1985 to 2000, the networks would display the disclaimer "in stereo (where available)" at the beginning of stereo programming, sometimes using marketing tags such as CBS's "StereoSound" to describe their institution of stereo service. Networks in Canada and Mexico, which also used the NTSC video standard, utilized MTS sound when made available.

DTV transition in the United States

As a component of the NTSC standard, MTS is no longer being used in U.S. full-power television broadcasting after the June 12, 2009DTV transition in the United States.It remains in use inLPTVand in analoguecable television.Allcoupon-eligible converter boxes(CECBs) are required to outputstereo soundviaRCA connectors,but MTS is merely optional for theRF modulatorthat every CECB contains. NTIA has stated that MTS was made optional for cost reasons;this may have been due to a belief that MTS still required royalty payments to THAT Corporation, which is no longer true except for some digital implementations.

THAT has created consumer pages on the DTV transition and how it affects MTS.The site describes the situation by stating that most consumers with CECBs will end up withmonauralTV sound, since RF-only connections are common and MTS is optional (and rare) for CECBs.

Specification

The original North American television standards provided a significant amount ofbandwidthfor the audio signal, 0.5 MHz, although the audio signal itself was defined to extend from 50 Hz to 15,000 Hz. This was centered on the audiocarrier signal4.5 MHz above the video signal, and given 25 kHz on either side of the carrier, using only 15 kHz of it.

This meant the lower and upper 0.2475 MHz of the audio channel was unused. Due to the nature of theNTSCcolor signals added in the 1950s, the upper parts of the color signal pushed into the lower audiosideband.With the audio signal centered within the 0.5 MHz channel, and the lower 0.25 MHz being partially infringed on by leftover video signal, the upper 0.25 MHz was left largely empty.

MTS worked by adding new signals to the free portion of this upper 0.25 MHz allocation. The original audio signal was left alone and broadcast as it always had been. Under MTS, this is the Main Channel. The actual signal in this channel is constructed by adding together the two stereo channels to produce a signal largely identical to the originalmonoauralsignals and can be received on any NTSC television even without stereo circuitry.

A second channel is then added, the Stereo Subchannel, centered at 31.468 kHz and extending 15 kHz on either side. This left a small gap between the Main and Stereo signals at 15.734 kHz. Thispilot signalis also known as "H", or "1H", and its frequency is selected to be a harmonic of the video's horizontal scan signal so that it can be accurately recreated from the video signal using aphase locked loop.If there is any signal present at the 1H frequency, the television knows a stereo version of the signal is present.

The Stereo Subchannel consisted of the same two audio signals, L and R, but mixed out of phase to produce the "L–R" signal, or "difference". This signal is sent at a higher amplitude and encoded usingdbxcompression to reduce high-frequency noise. To lower total average power, the carrier is not sent (which means there is no always-on signal at that frequency). On reception, the receiver uses the video signal to create the Pilot, and then examines that frequency to see if there is any signal present. If there is, the difference signal is extracted by filtering out the signal between 1H and 3H into a separate channel, and the carrier is re-created by adding 2H to this. This signal is then decompressed from its dbx format, and then fed, along with the original Main, to a stereo decoder.FM stereo radio works in the same fashion, differing mainly in that the equivalent to the H signal is 19 kHz, not 15.734.

SAP, if present, is centered on 5H, but encodes a monaural signal at lower audio fidelity and amplitude.The PRO signal is likewise encoded at 7H. A signal using all four channels extends only to about half of the available bandwidth in the original audio upper sideband.

Usage of audio channels

Thesecond audio program(SAP) also is part of the standard, providing anotherlanguage,avideo descriptionservice likeDVS,or a completely separate service like acampus radiostation orweatheradio.This sub-carrier is at 5x horizontal sync and is also dBx encoded.

A third PRO (professional) channel is provided for internal use by the station, and may handle audio or data. The PRO channel is normally used withelectronic news gatheringduringnewsbroadcaststo talk to the remote location (such as areporteron-location), which can then talk back through theremote linkto theTV station.Specializedreceiversfor the PRO channel are generally only sold to broadcast professionals. This sub-carrier is at 6.5x horizontal sync.

MTS signals are indicated to the television receiver by adding a 15.734 kHzpilot toneto the signal. The MTS pilot is locked or derived from the horizontal sync signal used to lock the video display. Variations in phase or frequency of the horizontal sync are therefore transferred to the audio. UHF transmitters in use in 1984 generally had significant phase errors introduced in this signal making the transmission of stereo audio on UHF stations of that time nearly impossible. Later refinements in UHF transmitters minimized these effects and allowed stereo transmission for those stations.

Most FM broadcast receivers are capable of receiving the audio portion of NTSC Channel 6 at 87.75 MHz, but only inmonaural.Because the pilot tone frequency at 15.734 kHz is different from that of the ordinary FM band (19 kHz), such radios cannot decode MTS.

Real-world performance

In ideal circumstances, MTS Stereo is better in performance than standard VHF FM stereo.In both FM Stereo and MTS the L-R subchannel is AM double-sideband modulated. AM is known to be susceptible to interference and noise reduction to the sub-channel aids in the improvement of SNR over standard FM broadcast. The sub-channel information isdbx-encodedto improve the audio with typical SNR greater than 50 dB. By adding noise reduction to the sub-channel only, complete mono compatibility was maintained. Viewers who owned mono TV sets would hear normal audio, only limited to 15 kHz bandwidth.

The original specifications called for a brick wall elliptical filter in each of the audio channels prior to encoding. The cutoff frequency of this filter was 15 kHz to prevent any horizontal sync interference (15.734 kHz) from being encoded in the audio. Manufacturers of modulators, however, used lower cutoff filters as they saw fit, also reducing the cost of audio filters. Typically, they chose 14 kHz although some used filters as low as 12.5 kHz. The elliptical filter was chosen for having the greatest bandwidth with the lowest phase distortion at the cutoff frequency. In comparison, standard FM modulators filter the audio at slightly higher frequencies but still must protect the 19 kHz pilot signal. The filter used during EIA/FCC testing had a characteristic that was −60 dB at 15.5 kHz. As transformer audio coupling was common at that time, the lower frequency limit was set to 50 Hz although modulators without transformer inputs were flat down to at least 20 Hz.

Typical separation was better than 35 dB. However, level matching between channels was essential to achieve this specification. Left and Right audio levels needed to be matched within less than 0.1 dB to achieve the separation stated.

Maintaining the phase stability of the horizontal sync is essential to good audio in the decode process. During transmission, the phase of the horizontal sync could vary with picture and chroma levels. ICPM (Incidental Carrier Phase Modulation), a measure of transmitted phase stability, needs to be less than 4.5% for best audio sub channel decoding. This was more of a problem with UHF transmitters of the day. Multi-cavity klystron RF amplifiers of that time typically had an ICPM above 7%. This made UHF transmission of MTS stereo impossible. Later UHF transmitter designs improved ICPM performance and allowed MTS stereo transmission.

Licensing

Because of the use of dbxcompanding,every TV device that decoded MTS originally required the payment ofroyalties—first todbx, Inc.,then toTHAT Corporationwhich was spun off from dbx in 1989 and acquired its MTS patents in 1994; however, those patents expired worldwide in 2004.Though THAT now owns some patents related to digital implementations of MTS, a letter from THAT to theNational Telecommunications and Information Administrationin 2007 confirms that no license is required from THAT for all analog and some digital implementations of MTS.

Adoption

Several nations outside North America using theNTSCstandard adopted the MTS format for their analog systems, includingChile,Colombia,Taiwanand thePhilippines.Japanadopted their ownEIAJ MTSstandard, within their owndomestic NTSC variant.Two countries,BrazilandArgentina,used the MTS standard with alternatePALstandards.

See also

• NICAM
• Zweikanalton
• EIAJ MTS

References

Sources

• Alan Skierkiewicz (November 1985), "Stereo one year later", Television Broadcast, p. 76