Bevaix boat
 | This article includes alist of references,related reading,orexternal links,but its sources remain unclear because it lacksinline citations.(March 2020) |
TheBevaix boatis a 1st-centuryGallo-Romanwreck from the Bay ofBevaix,Lake Neuchatel,Switzerland.The remains of the ship, and a modern reconstruction, are on display at theLaténiumarcheology museum.
The boat[edit]
The Bevaix boat was built from largeoakplanks and measured 19.40 metres (63.6 ft) in length and around 2.90 metres (9.5 ft) in beam. It is characterized by a flat bottom and the complete absence of akeelor any central plank. Its four principle bottom planks were arranged one besides the other in a way that the first plank forms thesternand the last one forms thebow.The beam of the boat was determined by the addition of L-shapedbilgestrakes.These strakes allowed a direct transition between the flat bottom and the sides of the boat. The spaces left between the bilge strakes and the four large bottom planks were filled by two planks with an irregular outline. The purpose of these last planks was to obtain appropriatesymmetryof the bottom. The upper strakes, those above the bilge strake, did not survive. However, evidence ofcaulking,found on the upper edges of the bilge strakes clearly suggests that the sides had been heightened by at least one or two strakes. This, in turn, led to estimates suggesting that the maximum height of the boat was about 0.80 to 0.90 metres (2.6 to 3.0 ft).
Framing[edit]
Twenty-two pairs of internal frames, also made of oak, were arranged head to tail to give almost vertical sides. All the pairs consisted of two timbers, each made of a single naturally bent timber which was cut from a tree junction (main trunk as floor support, and branch junction as side support). In every case, frames were always installed in pairs covering the whole length of the bottom, but alternatively supporting only one side of the hull. The only exception is a sixth pair, which was a single piece of oak with amortise cutin the center to function as a mast-step. The framing was fastened to the planks with some 300 iron nails driven from inside. They passed first through the frame, and then the strakes. Any projecting end was clenched at the right angle (double-clenched according to some sources).
Caulking[edit]
The Bevaix boat presents a very distinctive caulking technique, which clearly differentiated it from similar finds of this period from other parts ofEurope.It was observed that caulking was consistently present between all the planks of the boat. First, a string was inserted into the seam. Next, this string was covered by layer of mosses, which in turn was held by a woodenlaththat was secured with thousands of little caulking nails, inserted into the seams from the outside.
References[edit]
- Arnold, B. 1975. The Gallo-Roman boat from the Bay of Bevaix, Lake Neuchatel, Switzerland, IJNA 4: 123–141
- Arnold, B. 1980. Navigation sur le Lac Neuchatel; une esquisse a travers le temp, Helvetia Archaeologica
- Arnold, B. 1979. Gallo-Roman boat finds in Switzerland, CBA Research Report 24: 31–5
- Gardiner, R. 1996. The Earliest Ships: 66–7