Clothes iron

An electric steam iron

Aclothes iron(alsoflatiron,smoothing iron,dry iron,steam ironor simplyiron) is asmall appliancethat, when heated, is used to pressclothesto removewrinklesand unwanted creases. Domestic irons generally range in operating temperature from between 121 °C (250 °F) to 182 °C (360 °F). It is named for the metal (iron) of which the device was historically made, and the use of it is generally calledironing,the final step in the process oflaundering clothes.

Ironing works by loosening the ties between the long chains of molecules that exist inpolymerfiber materials. With the heat and the weight of the ironing plate, the fibers are stretched and the fabric maintains its new shape when cool. Some materials, such as cotton, require the use of water to loosen the intermolecular bonds.

History and development

A charcoal iron

Box iron (Minalin, Pampanga,PhilippinesMuseum).

Flat iron stove

Typical English flat irons of the 1800s (CollectionTranby House,Australia). The shape was used by Victorian antiquarians to describe a style of medievalshield,termed by analogyheater shield.

Before the introduction of electricity, irons were heated by combustion, either in a fire or with some internal arrangement. An "electric flatiron" was invented by AmericanHenry Seely Whiteand patented on June 6, 1882.It weighed almost 15 pounds (6.8 kg) and took a long time to heat. The UKElectricity Associationis reported to have said that an electric iron with a carbon arc appeared in France in 1880, but this is considered doubtful.

Two of the oldest sorts of iron were either containers filled with a burning substance, or solid lumps of metal which could be heated directly.

Metal pans filled with hot coals were used for smoothing fabrics in China in the 1st century BC.A later design consisted of an iron box which could be filled with hot coals, which had to be periodically aerated by attaching a bellows. In the late nineteenth and early twentieth centuries, there were many irons in use that were heated by fuels such askerosene,ethanol,whale oil,natural gas,carbide gas (acetylene,as withcarbide lamps), or evengasoline.Some houses were equipped with a system of pipes for distributing natural gas or carbide gas to different rooms in order to operate appliances such as irons, in addition to lights. Despite the risk of fire, liquid-fuel irons were sold in U.S. rural areas up through World War II. InKeralain India, burning coconut shells were used instead of charcoal, as they have a similar heating capacity. This method is still in use as a backup device, since power outages are frequent. Other box irons had heated metal inserts instead of hot coals.

From the 17th century,sadironsorsad irons(from Middle English "sad", meaning "solid", used in English through the 1800s) began to be used. They were thick slabs ofcast iron,triangular and with a handle, heated in a fire or on a stove. These were also called flat irons. A laundry worker would employ a cluster of solid irons that were heated from a single source: As the iron currently in use cooled down, it could be quickly replaced by a hot one.

In the industrialized world, these designs have been superseded by the electric iron, which usesresistiveheating from anelectric current.The hot plate, called thesole plate,is made ofaluminiumorstainless steelpolished to be as smooth as possible; it is sometimes coated with a low-friction heat-resistant plastic to reduce friction below that of the metal plate. The heating element is controlled by athermostatthat switches the current on and off to maintain the selected temperature. The invention of the resistively heated electric iron is credited to Henry W. Seeley of New York City in 1882. In the same year an iron heated by a carbon arc was introduced in France, but was too dangerous to be successful. The early electric irons had no easy way to control their temperature, and the first thermostatically controlled electric iron appeared in the 1920s. The first commercially available electric steam iron was introduced in 1926 by a New York drying and cleaning company, Eldec, but was not a commercial success. The patent for an electric steam iron and dampener was issued to Max Skolnik of Chicago in 1934. In 1938, Skolnik granted the Steam-O-Matic Corporation of New York the exclusive right to manufacture steam-electric irons. This was the first steam iron to achieve any degree of popularity, and led the way to more widespread use of the electric steam iron during the 1940s and 1950s.

Types and names

Iron collection

Historically, irons have had several variations and have thus been called by many names:

• Flatiron (American English), flat iron (British English) or smoothing iron

The general name for a hand-held iron consisting simply of a handle and a solid, flat, metal base, and named for the flat ironing face used to smooth clothes.

• Sad iron or sadiron

Mentioned above, meaning "solid" or heavy iron, where the base is a solid block of metal, sometimes used to refer to irons with heavier bases than a typical "flatiron".

• Box iron, ironing box, charcoal iron, ox-tongue iron or slug iron

Mentioned above; the base is a container, into which hot coals or a metal brick or slug can be inserted to keep the iron heated. The ox-tongue iron is named for the particular shape of the insert, referred to as an ox-tongue slug.

• Goose, tailor's goose or, in Scots,gusing iron

A type of flat iron or sad iron named for the goose-like curve in its neck, and (in the case of "tailor's goose" ) its usage by tailors.

• Goffering iron

This type of iron, now obsolete, consists of ametal cylinder oriented horizontally on a stand.It was used to ironruffsand collars.

Hygiene

Proper ironing of clothes has proven to be an effective method to avoid infections like those caused bylice.

Features

A 1950sMorphy Richardselectric iron with original box

AWaltonelectric iron with temperature control dial.

Modern irons for home use can have the following features:

• A design that allows the iron to be set down, usually standing on its end, without the hot soleplate touching anything that could be damaged;
• Athermostatensuring maintenance of a constant temperature;
• A temperature control dial allowing the user to select the operating temperatures (usually marked with types of cloth rather than temperatures: "silk","wool","cotton","linen",etc.);
• An electrical cord with heat-resistantsilicone rubberinsulation;
• Injection ofsteamthrough the fabric during the ironing process;
  • A water reservoir inside the iron used for steam generation;
  • An indicator showing the amount of water left in the reservoir,
  • Constant steam: constantly sends steam through the hot part of the iron into the clothes;
  • Steam burst: sends a burst of steam through the clothes when the user presses a button;
  • (advanced feature) Dial controlling the amount of steam to emit as a constant stream;
  • (advanced feature) Anti-drip system;
• Cord control: the point at which the cord attaches to the iron has a spring to hold the cord out of the way while ironing and likewise when setting down the iron (prevents fires, is more convenient, etc.);
• A retractable cord for easy storage;
• (advanced feature) non-stick coating along the sole plate to help the iron glide across the fabric
• (advanced feature) Anti-burn control: if the iron is left flat (possibly touching clothes) for too long, the iron shuts off to prevent scorching and fires;
• (advanced feature) Energy saving control: if the iron is left undisturbed for several (10 or 15) minutes, the iron shuts off.
• Cordless irons: the iron is placed on a stand for a short period to warm up, usingthermal massto stay hot for a short period. These are useful for light loads only.Batterypower is not viable for irons as they require more power than practical batteries can provide.
• (advanced feature) 3-way automatic shut-off
• (advanced feature) self-cleaning
• (advanced feature) Anti scale to help to remove lime scale buildup of using hard water for long time.
• (advanced feature) vertical steam to help to remove creases and wrinkles by holding an iron vertically and steaming material close to it.

Collections

Clothes iron museum inPereslavl, Russia

One of the world's larger collection of irons, comprising 1300 historical examples of irons from Germany and the rest of the world, is housed inGochsheim Castle,nearKarlsruhe,Germany.

Many ethnographical museums around the world have collections of irons. InUkraine,for example, about 150 irons are the part of the exhibition of theRadomysl Castlein Ukraine.

Ironing center

Ironing center with the separate tank visible

An ironing center orsteam ironingstation is a device consisting of a clothes iron and a separate steam-generating tank. By having a separate tank, the ironing unit can generate more steam than a conventional iron, making steam ironing faster. Such ironing facilities take longer to warm up than conventional irons, and cost more.

See also

Josephine Bakerironing (1956)

• Dadeumi,a mechanical way to smooth clothing, once traditional in Korea
• Flatiron Building,of cross-section like a flatiron
• Flatiron gunboat,flatiron-shaped in plan view
• Hair iron
• Home robot
• Mangle (machine)
• Soldering iron
• Trouser press
• Mary Florence Potts,inventor of the detachable cold wooden handle for irons

External links

• Charcoal and other antique ironsfrom the White River Valley Museum
• Antique Ironsfrom the Virtual Museum of Textile Arts