Fluorocarbon

Immisciblelayers of colored water (top) and much denserperfluoroheptane(bottom) in a beaker; a goldfish and crab cannot penetrate the boundary;coinsrest at the bottom.

Fluorocarbonsarechemical compoundswithcarbon-fluorine bonds.Compounds that contain many C-F bonds often have distinctive properties, e.g., enhancedstability, volatility, and hydrophobicity. Several fluorocarbons and their derivatives are commercialpolymers,refrigerants,drugs,andanesthetics.

Nomenclature

PerfluorocarbonsorPFCs,areorganofluorinecompounds with the formula C_xF_y,meaning they contain onlycarbonandfluorine.The terminology is not strictly followed and many fluorine-containing organic compounds are also called fluorocarbons.Compounds with the prefixperfluoro-are hydrocarbons, including those with heteroatoms, wherein all C-H bonds have been replaced by C-F bonds.Fluorocarbons includes perfluoroalkanes, fluoroalkenes, fluoroalkynes, and perfluoroaromatic compounds.

Perfluoroalkanes

Chemical properties

Perfluoroalkanes are very stable because of the strength of thecarbon–fluorine bond,one of the strongest in organic chemistry. Its strength is a result of the electronegativity of fluorine imparting partial ionic character throughpartial chargeson the carbon and fluorine atoms, which shorten and strengthen the bond (compared to carbon-hydrogen bonds) through favorablecovalentinteractions. Additionally, multiple carbon–fluorine bonds increase the strength and stability of other nearby carbon–fluorine bonds on the samegeminalcarbon, as the carbon has a higher positive partial charge.Furthermore, multiple carbon–fluorine bonds also strengthen the "skeletal" carbon–carbon bonds from theinductive effect.Therefore,saturatedfluorocarbons are more chemically and thermally stable than their corresponding hydrocarbon counterparts, and indeed any other organic compound. They are susceptible to attack by very strong reductants, e.g.Birch reductionand very specialized organometallic complexes.

Fluorocarbons are colorless and have high density, up to over twice that of water. They are not miscible with most organic solvents (e.g., ethanol, acetone, ethyl acetate, and chloroform), but are miscible with some hydrocarbons (e.g., hexane in some cases). They have very low solubility in water, and water has a very low solubility in them (on the order of 10 ppm). They have lowrefractive indices.

${\ce {{\overset {\delta+}{C}}-{\overset {\delta-}{F}}}}$

The partial charges in the polarized carbon–fluorine bond

As the highelectronegativityof fluorine reduces thepolarizabilityof the atom,fluorocarbons are only weakly susceptible to the fleeting dipoles that form the basis of theLondon dispersion force.As a result, fluorocarbons have low intermolecular attractive forces and arelipophobicin addition to beinghydrophobicandnon-polar.Reflecting the weakintermolecular forcesthese compounds exhibit lowviscositieswhen compared to liquids of similarboiling points,lowsurface tensionand lowheats of vaporization.The lowattractive forcesin fluorocarbon liquids make themcompressible(lowbulk modulus) and able to dissolve gas relatively well. Smaller fluorocarbons are extremelyvolatile.There are five perfluoroalkane gases:tetrafluoromethane(bp −128 °C),hexafluoroethane(bp −78.2 °C),octafluoropropane(bp −36.5 °C),perfluoro-n-butane(bp −2.2 °C) and perfluoro-iso-butane (bp −1 °C). Nearly all other fluoroalkanes are liquids; the most notable exception isperfluorocyclohexane,whichsublimesat 51 °C.Fluorocarbons also have lowsurface energiesand highdielectricstrengths.

• Perfluoroalkanes
• 
  Carbon tetrafluoride,the simplest perfluoroalkane
• 
  Perfluorooctane,a linear perfluoroalkane
• 
  Perfluoro-2-methylpentane,a branched perfluoroalkane
• 
  Perfluoro-1,3-dimethylcyclohexane,a cyclic perfluoroalkane
• 
  Perfluorodecalin,a polycyclic perfluoroalkane

Flammability

In the 1960s there was a lot of interest in fluorocarbons as anesthetics. The research did not produce any anesthetics, but the research included tests on the issue of flammability, and showed that the tested fluorocarbons were not flammable in air in any proportion, though most of the tests were in pureoxygenor purenitrous oxide(gases of importance in anesthesiology).

Compound	Test conditions	Result
Hexafluoroethane	Lower flammability limit in oxygen	None
Perfluoropentane	Flash pointin air	None
	Flash point in oxygen	−6 °C
	Flash point nitrous oxide	−32 °C
Perfluoromethylcyclohexane	Lower flammability limit in air	None
	Lower flammability limit in oxygen	8.3%
	Lower flammability limit in oxygen (50 °C)	7.4%
	Lower flammability limit in nitrous oxide	7.7%
Perfluoro-1,3-dimethylcyclohexane	Lower flammability limit in oxygen (50 °C)	5.2%
Perfluoromethyldecalin	Spontaneous ignition test in oxygen at 127 bar	No ignition at 500 °C
	Spontaneous ignition in adiabatic shock wave in oxygen, 0.98 to 186 bar	No ignition
	Spontaneous ignition in adiabatic shock wave in oxygen, 0.98 to 196 bar	Ignition

In 1993, 3M considered fluorocarbons as fire extinguishants to replace CFCs.This extinguishing effect has been attributed to their highheat capacity,which takes heat away from the fire. It has been suggested that an atmosphere containing a significant percentage of perfluorocarbons on a space station or similar would prevent fires altogether. When combustion does occur, toxic fumes result, includingcarbonyl fluoride,carbon monoxide,andhydrogen fluoride.

Gas dissolving properties

Perfluorocarbons dissolve relatively high volumes of gases. The high solubility of gases is attributed to the weak intermolecular interactions in these fluorocarbon fluids.

The table shows values for the mole fraction,x₁,of nitrogen dissolved, calculated from theBlood–gas partition coefficient,at 298.15 K (25 °C), 0.101325 MPa.

Liquid	104x1	Concentration ( mM )
Water	0.118	0.65
Ethanol	3.57	6.12
Tetrahydrofuran	5.21	6.42
Acetone	5.42	7.32
Cyclohexane	7.73	7.16
Perfluoro-1,3-dimethylcyclohexane	31.9	14.6
Perfluoromethylcyclohexane	33.1	16.9

Manufacture

The development of the fluorocarbon industry coincided withWorld War II.Prior to that, fluorocarbons were prepared by reaction of fluorine with the hydrocarbon, i.e., direct fluorination. Because C-C bonds are readily cleaved by fluorine, direct fluorination mainly affords smaller perfluorocarbons, such as tetrafluoromethane, hexafluoroethane, and octafluoropropane.

Fowler process

A major breakthrough that allowed the large scale manufacture of fluorocarbons was theFowler process.In this process,cobalt trifluorideis used as the source of fluorine. Illustrative is the synthesis ofperfluorohexane:

C₆H₁₄+ 28 CoF₃→ C₆F₁₄+ 14 HF + 28 CoF₂

The resulting cobalt difluoride is then regenerated, sometimes in a separate reactor:

2 CoF₂+ F₂→ 2 CoF₃

Industrially, both steps are combined, for example in the manufacture of the Flutec range of fluorocarbons by F2 chemicals Ltd, using a vertical stirred bed reactor, with hydrocarbon introduced at the bottom, and fluorine introduced halfway up the reactor. The fluorocarbon vapor is recovered from the top.

Electrochemical fluorination

Electrochemical fluorination(ECF) (also known as the Simons' process) involveselectrolysisof a substrate dissolved inhydrogen fluoride.As fluorine is itself manufactured by the electrolysis of hydrogen fluoride, ECF is a rather more direct route to fluorocarbons. The process proceeds at low voltage (5 – 6 V) so that free fluorine is not liberated. The choice of substrate is restricted as ideally it should be soluble in hydrogen fluoride. Ethers and tertiary amines are typically employed. To make perfluorohexane, trihexylamine is used, for example:

N(C₆H₁₃)₃+ 45 HF → 3 C₆F₁₄+ NF₃+ 42 H₂

The perfluorinated amine will also be produced:

N(C₆H₁₃)₃+ 39 HF → N(C₆F₁₃)₃+ 39 H₂

Environmental and health concerns

Fluoroalkanes are generally inert and non-toxic.

Fluoroalkanes are notozone depleting,as they contain no chlorine or bromine atoms, and they are sometimes used as replacements for ozone-depleting chemicals. The term fluorocarbon is used rather loosely to include any chemical containing fluorine and carbon, includingchlorofluorocarbons,which are ozone depleting.

Perfluoroalkanes used in medical procedures are rapidly excreted from the body, primarily via expiration with the rate of excretion as a function of the vapour pressure; the half-life foroctafluoropropaneis less than 2 minutes,compared to about a week for perfluorodecalin.

Atmospheric concentration of PFC-14 and PFC-116 compared to similar man-made halogenated gases between years 1978 and 2015 (right graph). Note the logarithmic scale.

Low-boiling perfluoroalkanes are potentgreenhouse gases,in part due to their very long atmospheric lifetime, and their use is covered by theKyoto Protocol.Theglobal warming potential(compared to that of carbon dioxide) of many gases can be found in the IPCC 5th assessment report,with an extract below for a few perfluoroalkanes.

Name	Chemical formula	Lifetime (y)	GWP (100 years)
PFC-14	CF4	50000	6630
PFC-116	C2F6	10000	11100
PFC-c216	c-C3F6	3000	9200
PFC-218	C3F6	2600	8900
PFC-318	c-C4F8	3200	9540

The aluminium smelting industry has been a major source of atmospheric perfluorocarbons (tetrafluoromethaneandhexafluoroethaneespecially), produced as by-product of the electrolysis process.However, the industry has been actively involved in reducing emissions in recent years.

Applications

As they are inert, perfluoroalkanes have essentially no chemical uses, but their physical properties have led to their use in many diverse applications. These include:

• Perfluorocarbon tracer
• Liquid dielectric
• Chemical vapor deposition
• Organic Rankine cycle
• Fluorous biphasic catalysis
• Cosmetics
• Ski waxes

As well as several medical uses:

• Contrast-enhanced ultrasound
• Oxygen Therapeutics
• Blood substitute
• Liquid breathing
• Eye surgery
• Tattoo removal

Fluoroalkenes and fluoroalkynes

Unsaturatedfluorocarbons are far more reactive than fluoroalkanes. Althoughdifluoroacetyleneis unstable (as is typical for related alkynes, seedichloroacetylene),hexafluoro-2-butyneand related fluorinated alkynes are well known.

• Unsaturated fluorocarbons
• 
  Perfluoroisobutene,a reactive and highly toxic fluoroalkene gas
• 
  Tetrafluoroethylene,an important perfluorinated monomer.
• 
  Hexafluoropropylene,another important perfluoroalkene.
• 
  Hexafluoro-2-butyne,a perfluoroalkyne.

Polymerization

Fluoroalkenes polymerize more exothermically than normal alkenes.Unsaturated fluorocarbons have a driving force towards sp³hybridization due to the electronegative fluorine atoms seeking a greater share of bonding electrons with reduced s character in orbitals.The most famous member of this class istetrafluoroethylene,which is used to manufacturepolytetrafluoroethylene(PTFE), better known under the trade nameTeflon.

Environmental and health concerns

Fluoroalkenes and fluorinated alkynes are reactive and many are toxic for exampleperfluoroisobutene.To producepolytetrafluoroethylenevariousfluorinated surfactantsare used, in the process known asEmulsion polymerization,and the surfactant included in the polymer can bioaccumulate.

Perfluoroaromatic compounds

Perfluoroaromatic compounds contain only carbon and fluorine, like other fluorocarbons, but also contain an aromatic ring. The three most important examples arehexafluorobenzene,octafluorotoluene,and octafluoronaphthalene.

• Perfluoroaromatic compounds
• 
  Hexafluorobenzene

Perfluoroaromatic compounds can be manufactured via the Fowler process, like fluoroalkanes, but the conditions must be adjusted to prevent full fluorination. They can also be made by heating the corresponding perchloroaromatic compound with potassium fluoride at high temperature (typically 500 °C), during which the chlorine atoms are replaced by fluorine atoms. A third route is defluorination of the fluoroalkane; for example, octafluorotoluene can be made fromperfluoromethylcyclohexaneby heating to 500 °C with a nickel or iron catalyst.

Perfluoroaromatic compounds are relatively volatile for their molecular weight, with melting and boiling points similar to the corresponding aromatic compound, as the table below shows. They have high density and are non-flammable. For the most part, they are colorless liquids. Unlike the perfluoralkanes, they tend to bemisciblewith common solvents.

Compound	Melting point (°C)	Boiling point (°C)
Hexafluorobenzene	5.3	80.5
Benzene	5.5	80.1
Octafluorotoluene	<−70	102–103
Toluene	−95	110.6
Perfluoro(ethylbenzene)		114–115
Ethylbenzene	−93.9	136.2
Octafluoronaphthalene	86–87	209
Naphthalene	80.2	217.9

See also

• Category:Fluorocarbons
• Fluorochemical industry
• Hydrofluorocarbon
• Fluorographene
• Perfluorocycloalkene(PFCA)

External links

• Fluorocarbons and Sulphur Hexafluoride, proposed by the European Fluorocarbons Technical Committee
• CFCs and Ozone DepletionFreeview video provided by the Vega Science Trust.
• Introduction to fluoropolymers
• Organofluorine chemistry by Graham Sandford