G.992.3 Annex L
 | This articleprovides insufficient context for those unfamiliar with the subject.(December 2017) |
ITU-T G.992.3 Annex Lis an optional specification in theITU-TrecommendationG.992.3forADSL2titledSpecific requirements for a Reach Extended ADSL2 (READSL2) system operating in the frequency band above POTS,therefore it is often referred to asReach Extended ADSL2orREADSL2.
The main difference between this specification and commonly deployed Annex A is the maximum distance that can be used. The power of the lower frequencies used for transmitting data is boosted up to increase the reach of this signal up to 7 kilometers (23,000 ft). The upper frequency limit for READSL2 is reduced to 552 kHz to keep the total power roughly the same as Annex A. Since READSL2 is intended for use on long loops there isn't much (any) usable bandwidth above 552 kHz anyway.
Although the standard development is completed and verified by the ITU, some owners of local loop networks don't allow this standard to be used because the high power can create audibleCrosstalk.However, this standard is implemented nationwide by theincumbent local exchange carrierFrance Telecom.
Frequency plans described in the various annexes
[edit]
Tones are spaced apart by 4.3125kHz. In the Annex A, L and M frequency standards,POTS(analogPSTNvoice) occupies (what would be) tones 0-3, tones 4-7 are reserved for a ‘guard band’, and the upstream DSL transmission band uses tones 8-31 in Annex A and L, or 8-56 in Annex M. In Annex B,ISDNoccupies tones 0-31, DSL upstream uses tones 33-56. Annex I and J are for DSL-only lines with no POTS voice orISDNand upstream uses tones 0-31 (Annex I) or 0-56 (Annex J). Downstream transmission uses the highest tones from tone 33 for Annex A, I, L, or 60 for Annex B, J and M upwards.
See also
[edit]External links
[edit] | This article related totelecommunicationsis astub.You can help Wikipedia byexpanding it. |