Masonry

This article refers to the building structure component. For the fraternal organization, seeFreemasonry.

A mason laying abrickon top of themortar

Bridge over theIsábena riverin theMonastery of Santa María de Obarra,masonry construction with stones

Masonryis the craft of building a structure with brick, stone, or similar material, including mortarplasteringwhich are often laid in, bound, and pasted together bymortar.The termmasonrycan also refer to the building units (stone, brick, etc.) themselves.

The common materials of masonry construction arebricksand buildingstonesuch asmarble,granite,andlimestone,cast stone,concrete blocks,glass blocks,andadobe.Masonry is generally a highly durable form of construction. However, the materials used, the quality of the mortar and workmanship, and the pattern in which the units are assembled can substantially affect the durability of the overall masonry construction.

A person who constructs masonry is called a mason orbricklayer.These are both classified asconstruction trades.

History

Masonry is one of the oldest building crafts in the world. The construction of Egyptian pyramids, Roman aqueducts, and medieval cathedrals are all examples of masonry. Early structures used the weight of the masonry itself to stabilize the structure against lateral movements. The types and techniques of masonry used evolved with architectural needs and cultural norms. Since mid-20th century, masonry has often featured steel-reinforced elements to help carry the tension force present in modern thin, light, tall building systems.

Applications

Masonry has both structural and non-structural applications. Structural applications include walls, columns, beams, foundations, load-bearing arches, and others. On the other hand, masonry is also used in non-structural applications such as fireplaces chimneys and veneer systems.

Brick and concrete block are the most common types of masonry in use in industrialized nations and may be either load-bearing or non-load-bearing. Concrete blocks, especially those with hollow cores, offer various possibilities in masonry construction. They generally provide great compressive strength and are best suited to structures with light transverse loading when the cores remain unfilled. Filling some or all of the cores with concrete or concrete with steel reinforcement (typicallyrebar) offers much greater tensile and lateral strength to structures.

Advantages

• The use of materials such as bricks and stones can increase the thermal mass of a building.
• Masonry is a non-combustible product and can protect the building from fire.
• Masonry walls are more resistant to projectiles, such as debris from hurricanes or tornadoes.

Disadvantages

• Extreme weather, under certain circumstances, can cause degradation of masonry due to expansion and contraction forces associated with freeze-thaw cycles.
• Masonry tends to be heavy and must be built on a stable ground made of either undisturbed or mechanically-compacted soil, otherwise cracking may occur.
• Unlike concrete, masonry construction does not lend itself well to mechanization, and requires more skilled labor.

Structural limitations

One problem with masonry walls is that they rely mainly on their weight to keep them in place; each block or brick is only loosely connected to the next via a thin layer of mortar. This is why they do not perform well in earthquakes, when entire buildings are shaken horizontally. Many collapses during earthquakes occur in buildings that have load-bearing masonry walls. Besides, heavier buildings having masonry suffer more damage.

Dry set masonry

Dry set masonry supports a rusticlog bridge,where it provides a well-drained support for the log (which will lengthen its service life).

See also:dry stone

The strength of a masonry wall is not entirely dependent on the bond between the building material and the mortar; thefrictionbetween the interlocking blocks of masonry is often strong enough to provide a great deal of strength on its own. The blocks sometimes have grooves or other surface features added to enhance this interlocking, and somedry setmasonry structures forgo mortar altogether.

Stonework

Stone masonry

Main article:Stonemasonry

Stone blocks used in masonry can be dressed or rough, though in both examples corners, door and window jambs, and similar areas are usually dressed. Stonemasonry utilizing dressed stones is known asashlarmasonry, whereas masonry using irregularly shaped stones is known asrubble masonry.Both rubble and ashlar masonry can be laid in coursed rows of even height through the careful selection or cutting of stones, but a great deal of stone masonry is uncoursed.

• Slipform stonemasonryproduces a hybrid wall of reinforced concrete with a rubble stone face.
• Naturalstone veneersover CMU, cast-in-place, or tilt-up concrete walls are widely used to give the appearance of stone masonry.
• Sometimes river rock of smooth oval-shaped stones is used as a veneer. This type of material is not favored for solid masonry as it requires a great amount of mortar and can lack intrinsic structural strength.
• Manufactured-stone, or cultured stone, veneers are popular alternatives to natural stones.
• Manufactured-stone veneers are typically made from concrete.
• Natural stones from quarries around the world are sampled and recreated using molds, aggregate, and colorfast pigments.
• To the casual observer there may be no visual difference between veneers of natural and manufactured stone.

Brick

Main article:Brickwork

Brick work

Solid brickwork is made of two or morewythesof bricks with the units running horizontally (calledstretcherbricks) bound together with bricks runningtransverseto the wall (called "header" bricks). Each row of bricks is known as a course. The pattern of headers and stretchers employed gives rise to different 'bonds' such as the common bond (with every sixth course composed of headers), the English bond, and theFlemish bond(with alternating stretcher and header bricks present on every course). Bonds can differ in strength and in insulating ability. Vertically staggered bonds tend to be somewhat stronger and less prone to major cracking than a non-staggered bond.

Uniformity and rusticity

Masonry repair work done to a brick wall

The wide selection of brick styles and types generally available in industrialized nations allow much variety in the appearance of the final product. In buildings built during the 1950s-1970s, a high degree of uniformity of brick and accuracy in masonry was typical. In the period since then this style was thought to be too sterile, so attempts were made to emulate older, rougher work. Some brick surfaces are made to look particularly rustic by includingburntbricks, which have a darker color or an irregular shape. Others may use antique salvage bricks, or new bricks may be artificially aged by applying various surface treatments, such as tumbling. The attempts at rusticity of the late 20th century have been carried forward by masons specializing in a free, artistic style, where the courses are intentionallynotstraight, instead weaving to form more organic impressions.

Serpentine masonry

Main article:Crinkle crankle walls

A crinkle-crankle wall is a brick wall that follows a serpentine path, rather than a straight line. This type of wall is more resistant to toppling than a straight wall; so much so that it may be made of a single wythe of unreinforced brick and so despite its longer length may be more economical than a straight wall.

Concrete block

Concrete masonry units (CMUs) or blocks in a basement wall before burial

Blocks of cinder concrete (cinder blocksorbreezeblocks), ordinary concrete (concrete blocks), or hollow tile are generically known as Concrete Masonry Units (CMUs). They usually are much larger than ordinary bricks and so are much faster to lay for a wall of a given size. Furthermore, cinder and concrete blocks typically have much lowerwaterabsorption rates than brick. They often are used as the structural core for veneered brick masonry or are used alone for the walls of factories, garages, and otherindustrial-stylebuildings where such appearance is acceptable or desirable. Such blocks often receive astuccosurface for decoration. Surface-bondingcement,which contains synthetic fibers for reinforcement, is sometimes used in this application and can impart extra strength to a block wall. Surface-bonding cement is often pre-colored and can be stained or painted thus resulting in a finished stucco-like surface.

The primary structural advantage of concrete blocks in comparison to smaller clay-based bricks is that a CMU wall can be reinforced by filling the block voids withconcretewith or without steelrebar.Generally, certain voids are designated for filling and reinforcement, particularly at corners, wall-ends, and openings while other voids are left empty. This increases wall strength and stability more economically than filling and reinforcing all voids. Typically, structures made of CMUs will have the top course of blocks in the walls filled with concrete and tied together with steel reinforcement to form a bond beam.Bond beamsare often a requirement of modernbuilding codesand controls. Another type of steel reinforcement referred to asladder-reinforcement,can also be embedded in horizontal mortar joints of concrete block walls. The introduction of steel reinforcement generally results in a CMU wall having much greater lateral and tensile strength than unreinforced walls.

"Architectural masonry is the evolvement of standard concrete masonry blocks into aesthetically pleasing concrete masonry units (CMUs)".CMUs can be manufactured to provide a variety of surface appearances. They can be colored during manufacturing or stained or painted after installation. They can be split as part of the manufacturing process, giving the blocks a rough face replicating the appearance of natural stone, such asbrownstone.CMUs may also be scored, ribbed, sandblasted, polished, striated (raked or brushed), include decorative aggregates, be allowed to slump in a controlled fashion during curing, or include several of these techniques in their manufacture to provide a decorative appearance.

"Glazed concrete masonry units are manufactured by bonding a permanent colored facing (typically composed of polyester resins, silica sand and various other chemicals) to a concrete masonry unit, providing a smooth impervious surface."

Glass blockor glass brick are blocks made from glass and provide a translucent to clear vision through the block.

Veneer masonry

A masonry veneer wall consists of masonry units, usually clay-based bricks, installed on one or both sides of a structurally independent wall usually constructed of wood or masonry. In this context, the brick masonry is primarily decorative, not structural. The brick veneer is generally connected to the structural wall by brick ties (metal strips that are attached to the structural wall, as well as the mortar joints of the brick veneer). There is typically an air gap between the brick veneer and the structural wall. As clay-based brick is usually not completely waterproof, the structural wall will often have a water-resistant surface (usuallytar paper) andweep holescan be left at the base of the brick veneer to drain moisture that accumulates inside the air gap. Concrete blocks, real andcultured stones,and veneeradobeare sometimes used in a very similar veneer fashion.

Most insulated buildings that use concrete block, brick, adobe, stone, veneers or some combination thereof feature interiorinsulationin the form offiberglassbatts between wooden wall studs or in the form of rigid insulation boards covered withplasterordrywall.In most climates this insulation is much more effective on the exterior of the wall, allowing the building interior to take advantage of the aforementioned thermal mass of the masonry. This technique does, however, require some sort of weather-resistant exterior surface over the insulation and, consequently, is generally more expensive.

Gabions

Gabion Wall

Gabionsare baskets, usually now ofzinc-protectedsteel(galvanized steel) that are filled with fractured stone of medium size. These will act as a single unit and are stacked with setbacks to form a revetment orretaining wall.They have the advantage of being well drained, flexible, and resistant to flood, water flow from above, frost damage, and soil flow. Their expected useful life is only as long as the wire they are composed of and if used in severe climates (such as shore-side in a salt water environment) must be made of appropriate corrosion-resistant wire. Most modern gabions are rectangular. Earlier gabions were often cylindrical wicker baskets, open at both ends, used usually for temporary, often military, construction.

Similar work can be done with finer aggregates usingcellular confinement.

Passive fire protection (PFP)

Further information:Passive fire protection

Masonry walls have anendothermiceffect of itshydrates,as in chemically boundwater,unbound moisture from the concrete block, and the poured concrete if the hollow cores inside the blocks are filled. Masonry can withstand temperatures up to 1,000 °F (538 °C) and it can withstand direct exposure to fire for up to 4 hours.In addition to that, concrete masonry keeps fires contained to their room of origin 93% of the time.For those reasons, concrete and masonry units hold the highest flame spread index classification, Class A.

Fire cutscan be used to increase safety and reduce fire damage to masonry buildings.

Mechanical modeling of masonry structures

A comparison (using transmissionphotoelasticity) between the stress diffusion in an elastic body (on the left) and a model of masonry (on the right). A highly localized stress percolation is visible on the right.

From the point of view of material modeling, masonry is a special material of extreme mechanical properties (with a very high ratio between strength in compression and in tension), so that the applied loads do not diffuse as they do in elastic bodies, but tend to percolate along lines of high stiffness.

See also

Castle– Fortified residential structure of medieval Europe Clay panel– Building material made of clay with some additives Concrete finisher CEN/TC 125– European Union technical committee Defensive wall– Fortification used to protect an area from potential aggressors

Dry-stone wall– Construction methodPages displaying short descriptions of redirect targets Fire protection– Measures that prevent or mitigate unwanted fire Galleting– architectural technique in which small pieces of stone are pushed into wet mortarPages displaying wikidata descriptions as a fallback List of decorative stones NIST stone test wall

References

General references

• Atamturktur, Sezer; Laman, Jeffrey A. (2012). "Finite element model correlation and calibration of historic masonry monuments: review".The Structural Design of Tall and Special Buildings.21(2): 96–113.doi:10.1002/tal.577.S2CID111060455.
• Sarhosis, V.; Sheng, Y. (2014)."Identification of material parameters for low bond strength masonry".Engineering Structures.60:100–110.Bibcode:2014EngSt..60..100S.doi:10.1016/j.engstruct.2013.12.013.

External links

• Mason Contractors Association of America
• International Masonry Institute
• National Concrete Masonry Association
• Masonry Institute of America
• Illustrated Glossary of Stone Industry Terms