Topical medication

"Topical" redirects here. For other uses, seeTopical (disambiguation).

A medical professional administering nose drops

Instillation of eye drops

Atopical medicationis amedicationthat is applied to a particular place on or in the body. Most often topical medication means application tobody surfacessuch as theskinormucous membranesto treat ailments via a large range of classes includingcreams,foams,gels,lotions,and ointments.Many topical medications are epicutaneous, meaning that they are applied directly to the skin. Topical medications may also beinhalational,such asasthma medications,or applied to the surface of tissues other than the skin, such aseye dropsapplied to theconjunctiva,orear dropsplaced in the ear, or medications applied to the surface of atooth.The wordtopicalderives fromGreekτοπικόςtopikos,"of a place".

Justification

Topical drug delivery is a route of administeringdrugsvia theskinto provide topical therapeutic effects. As skin is one of the largest and most superficialorgansin thehumanbody,pharmacistsutilise it to deliver various drugs. This system usually provides a local effect on certain positions of the body. In ancient times, people usedherbsto put on wounds for relieving the inflammatory effect or as pain relievers. The use oftopical drugdelivery system is much broader now, fromsmoking cessationto beauty purposes. Nowadays, there are numerousdosage formsthat can be used topically, includingcream,ointment,lotion,patches,dusting powder and much more.There are many advantages for thisdrug delivery system– avoidingfirst pass metabolismwhich can increase itsbioavailability,being convenient and easy to apply to a large area, being easy to terminate the medication and avoiding gastro-intestinal irritations. All these can increase the patient compliance. However, there are several disadvantages for this system – causingskin irritationsand symptoms likerashesanditchinessmay occur. Also, only smallparticlescan pass through the skin, which limits the choice ofdrugs.Since skin is the main medium of topical drug delivery system, its conditions determine the rate of skin penetration leading to affecting thepharmacokineticsof thedrug.Thetemperature,pH valueand dryness of the skin need to be considered. There are some novel topical drugs in the market which can utilise the system as much as possible.

This localized system provides topical therapeutic effects via skin,eyes,noseandvaginato treatdiseases.The most common usage is for localskin infectionproblems. Dermatological products have variousformulationsand range in consistency though the most popular dermal products are semisolid dosage formsto provide topical treatment.

Factor affecting topical drug absorption

Topical drug absorption depends on two major factors – biological and physicochemical properties.

The first factor concerns body structure effects on thedrugs.The degradation of drugs can be affected by the site of applications. Some studies discovered differentPercutaneousabsorption patterns. Apart from the place, age also affects the absorption as the skin structure changes with age. The loweredcollagenand broadenedblood capillarynetworks happen with ageing. These features alter the effectiveness of absorption of both hydrophilic andlipophilic substancesintostratumcorneum underneath the surface of skin.The skin surface integrity can also affect the permeability of drugs such as the density ofhair follicles,sweat glandsor disintegrated byinflammationordehydration.

The other factor concerns metabolism of medications on skin. When the percutaneous drug is applied on skin, it will be gradually absorbed down the skin. Normally, when the drugs are absorbed, they will be metabolised by variousenzymesin our body and the amount will be lower. The exact amount delivered to the target action site determines the potency and bioavailability of the drugs. If theconcentrationis too low, the therapeutic effect is impeded; if the concentration is too high, drug toxicity may happen to cause side effects or even do harm to our body. For thetopical drugdelivery way, degradation of drugs in skin is very low compared toliver.The metabolism of drugs is mainly by metabolic enzymecytochrome P450,and this enzyme is not active in skin. TheCYP450actively metabolized drugs can then maintain high concentration when being applied on skin. DespiteCYP450enzyme action, thepartition coefficient(K) determines the activity of topical drugs. The ability of drug particles to go through the skin layer also affects the absorption of drugs. For transdermal activity, medicines with higher K value are harder to get rid of thelipid layer of skin cells.The trapped molecules then cannot penetrate into the skin. This reduces the efficacy of the transdermal drugs. The drugs target cells underneath the skin or need to diffuse intoblood capillaryto exert their effect. Meanwhile, the size of particles affects this transdermal process. The smaller the drug molecules, the faster the rate of penetration.Polarityof the drugs can affect this diffusion rate too. If the drug shows lower degree of ionization, it is less polar. Therefore, it can have a faster absorption rate.

Local versus systemic effect

The definition of the topicalroute of administrationsometimes states that both the application location and thepharmacodynamiceffect thereof is local.

A transdermal patch which delivers medication is applied to the skin. The patch is labelled with the time and date of administration as well as the administrator's initials.

In other cases,topicalis defined as applied to a localized area of the body or to the surface of a body part regardless of the location of the effect.By this definition, topical administration also includestransdermalapplication, where the substance is administered onto the skin but isabsorbedinto the body to attainsystemicdistribution. Such medications are generallyhydrophobicchemicals, such assteroid hormones.Specific types includetransdermal patcheswhich have become a popular means of administering some drugs forbirth control,hormone replacement therapy,and prevention ofmotion sickness.One example of anantibioticthat may be applied topically ischloramphenicol.

If defined strictly as having local effect, the topicalroute of administrationcan also includeenteral administrationof medications that are poorly absorbable by thegastrointestinal tract.One poorly absorbable antibiotic isvancomycin,which is recommended by mouth as a treatment for severeClostridium difficilecolitis.

Choice of base formulation

A medication's potency often is changed with its base. For example, sometopical steroidswill be classified one or two strengths higher when moving from cream to ointment. As a rule of thumb, an ointment base is more occlusive and will drive the medication into the skin more rapidly than a solution or cream base.

The manufacturer of each topical product has total control over the content of the base of a medication. Although containing the same active ingredients, one manufacturer's cream might be more acidic than the next, which could cause skin irritation or change its absorption rate. For example, a vaginal formulation ofmiconazoleantifungal cream might irritate the skin less than an athlete foot formulation of miconazole cream. These variations can, on occasion, result in differentclinical outcomes,even though the active ingredient is the same. No comparative potency labeling exists to ensure equal efficacy between brands of topical steroids (percentage of oil vs water dramatically affect the potency of topical steroid). Studies have confirmed that the potency of some topical steroid products may differ according to manufacturer or brand. An example of this is the case of brand nameValisonecream andKenalogcream in clinical studies have demonstrated significantly better vasoconstrictions than some forms of this drug produced bygeneric drugmanufacturers.However, in a simple base like an ointment, much less variation between manufacturers is common.

Indermatology,the base of a topical medication is often as important as the medication itself. It is extremely important to receive a medication in the correct base, before applying to the skin. A pharmacist should not substitute an ointment for a cream, or vice versa, as the potency of the medication can change. Some physicians use a thick ointment to replace the waterproof barrier of the inflamed skin in the treatment of eczema, and a cream might not accomplish the same clinical intention.

Formulations

There are many general classes, with no clear dividing line among similar formulations. As a result, what the manufacturer's marketing department chooses to list on the label of a topical medication might be completely different from what the form would normally be called.

Cream

Acreamis an emulsion of oil and water in approximately equal proportions. It penetrates thestratum corneumouter layer of skin wall. Cream is thicker than lotion, and maintains its shape when removed from its container. It tends to be moderate in moisturizing tendency. For topical steroid products, oil-in-water emulsions are common. Creams have a significant risk of causingimmunological sensitizationdue topreservativesand have a high rate of acceptance by patients. There is a great variation in ingredients, composition, pH, and tolerance among generic brands.

Foam

Foamcan be seen with topical steroid marketed for the scalp.

Gel

Main article:Topical gels

Gelsare thicker than liquids. Gels are often a semisolidemulsionand sometimes use alcohol as a solvent for the active ingredient; some gels liquefy at body temperature. Gel tends to be cellulose cut with alcohol or acetone. Gels tend to be self-drying, tend to have greatly variable ingredients between brands, and carry a significant risk of inducing hypersensitivity due to fragrances and preservatives. Gel is useful for hairy areas and body folds. In applying gel one should avoid fissures in the skin, due to the stinging effect of the alcohol base. Gel enjoys a high rate of acceptance due to its cosmetic elegance.

Lotion

Tube of factor 15 sun block lotion.

Lotionsare similar to solution but are thicker and tend to be moreemollientin nature than solution. They are usually oil mixed with water, and more often than not have less alcohol than solution. Lotions can be drying if they contain a high amount of alcohol.

Ointment

Metal case for Cruz Roja ointment from Mexico (beginning of the 20th century) from the permanent collection of theMuseo del Objeto del Objeto.

Anointmentis a homogeneous, viscous, semi-solid preparation; most commonly a greasy, thick water-in-oil emulsion (80% oil, 20% water) having a high viscosity, that is intended for external application to the skin or mucous membranes. Ointments have a water number that defines the maximum amount of water that they can contain. They are used asemollientsor for the application of active ingredients to the skin for protective, therapeutic, or prophylactic purposes and where a degree of occlusion is desired.

Ointments are used topically on a variety of body surfaces. These include theskinand themucous membranesof theeye(aneye ointment),chest,vulva,anus,andnose.An ointment may or may not be medicated.

Ointments are usually very moisturizing, and good for dry skin. They have a low risk of sensitization due to having few ingredients beyond the base oil or fat, and low irritation risk. There is typically little variability between brands of drugs. They are often disliked by patients due to greasiness.

The vehicle of an ointment is known as theointment base.The choice of a base depends upon the clinical indication for the ointment. The different types of ointment bases are:

• Absorption bases, e.g.,beeswaxandwool fat
• Emulsifying bases, e.g.,cetrimideandemulsifying wax
• Hydrocarbon bases, e.g.,ceresine,microcrystalline wax,hard paraffin,andsoft paraffin
• Vegetable oil bases, e.g.,almond oil,coconut oil,olive oil,peanut oil,andsesame oil
• Water-soluble bases, e.g.,macrogols200, 300, 400

The medicaments are dispersed in the base and are divided after penetrating the living cells of the skin.

The water number of an ointment is the maximum quantity of water that 100g of a base can contain at 20 °C.

Ointments are formulated using hydrophobic, hydrophilic, or water-emulsifying bases to provide preparations that are immiscible, miscible, or emulsifiable withskin secretions.They can also be derived from hydrocarbon (fatty), absorption, water-removable, or water-soluble bases.

Evaluation of ointments:

1. Drug content
2. Release of medicament from base
3. Medicament penetration
4. Consistency of the preparation
5. Absorption of medicament into blood stream
6. Irritant effect

Properties which affect choice of an ointment base are:

1. Stability
2. Penetrability
3. Solvent property
4. Irritant effects
5. Ease of application and removal

Methods of preparation of ointments:

• Fusion:In this method the ingredients are melted together in descending order of their melting points and stirred to ensure homogeneity.
• Trituration:In this finely subdivided insoluble medicaments are evenly distributed by grinding with a small amount of the base followed by dilution with gradually increasing amounts of the base.

Paste

Pastecombines three agents – oil, water, and powder. It is an ointment in which a powder is suspended.

Powder

Powderis either the pure drug by itself (talcum powder), or is made of the drug mixed in a carrier such ascorn starchor corn cob powder (Zeosorb AF – miconazole powder). Can be used as an inhaled topical (cocainepowder used in nasal surgery).

Shake lotion

A shake lotion is a mixture that separates into two or three parts over time. Frequently, an oil mixed with a water-based solution needs to be shaken into suspension before use and includes the instructions: "Shake well before use".

Solid

Medication may be placed in a solid form. Examples are deodorant, antiperspirants, astringents, and hemostatic agents. Some solids melt when they reach body temperature (e.g. rectal suppositories).

Sponge

Certain contraceptive methods rely onspongeas a carrier of a liquid medicine.Lemon juiceembedded in a sponge has been used as a primitive contraception in some cultures.

Tape

Cordran tape is an example of a topical steroid applied underocclusionby tape. This greatly increases the potency and absorption of the topical steroid and is used to treat inflammatory skin diseases.

Tincture

Atinctureis a skin preparation that has a high percentage of alcohol. It would normally be used as a drug vehicle if drying of the area is desired.

Topical solution

Topical solutions can be marketed as drops, rinses, or sprays, are generally of low viscosity, and often use alcohol or water in the base.These are usually a powder dissolved in alcohol, water, and sometimes oil; although a solution that uses alcohol as a base ingredient, as in topical steroids, can cause drying of the skin.There is significant variability among brands, and some solutions may cause irritation, depending on the preservative(s) and fragrances used in the base.

Some examples of topical solutions are given below:

1. Aluminium acetate topical solution: This is colorless, with a faint acetous odour and sweetish taste. It is applied topically as an astringent after dilution with 10-40 parts of water. This is used in many types of dermatologic creams, lotions, and pastes. Commercial premeasured and packed tablets and powders are available for this preparation.
2. Povidone iodine topical solution: This is a chemical complex of iodine with polyvinylpyrrolidone. The agent is a polymer with an average molecular weight of 40,000. The povidone iodine contains 10% available iodine, slowly released when applied to skin. This preparation is employed topically as a surgical scrub and non irritating antiseptic solution; its effectiveness is directly attributed to the presence and release of iodine from the complex. Commercial product:Betadinesolution.

Transdermal patch

Transdermal patchescan be a very precise time released method of delivering a drug. Cutting a patch in half might affect the dose delivered. The release of the active component from a transdermal delivery system (patch) may be controlled by diffusion through the adhesive which covers the whole patch, by diffusion through a membrane which may only have adhesive on the patch rim or drug release may be controlled by release from a polymer matrix. Cutting a patch might cause rapid dehydration of the base of the medicine and affect the rate of diffusion.

Vapor

Some medications are applied as an ointment or gel, and reach the mucous membrane via vaporization. Examples are nasaltopical decongestantsand smelling salt.

Topical Drug Classification System (TCS)

Graphical abstract of Topical Drug Classification System

Topical drug classification system (TCS) is proposed by theFDA.It is designed from theBiopharmaceutics Classification System(BCS) for oral immediate release solid drug products which is very successful for decades. There are 3 aspects to assess and 4 classes in total. The 3 aspects include qualitative (Q1), quantitative (Q2) and similarity ofin vitrorelease (IVR) rate (Q3).

Advantages of topical drug delivery systems

In the early 1970s, theAlza Corporation,through their founderAlejandro Zaffaroni,filed the first US patents describing transdermal delivery systems forscopolamine,nitroglycerinandnicotine.People found that applying medicines on the body surfaces is beneficial in many aspects. Skin medicines can give faster onset and local effect on our body as the surface cream can bypass first pass metabolism such as hepatic and intestinal metabolism. Apart from the absorption, dermal drugs effectively prevent oral delivery limitations such asnauseaandvomitingand poor appliances due to unpalatable tastes of the drugs. Topical application is an easy way for patients to tackle skin infections in a painless and non-invasive way. From a patient perspective, applying drugs on skin also provides stable dosage in blood so as to give the optimalbioavailabilityandtherapeutic effects.In case ofoverdoseor unwanted side effects, patients can take off or wash out the medicines quickly to eliminatetoxicityby simply removing the patch to stop the delivery of drugs.

Disadvantages of topical drug delivery systems

The site of putting the patches for topical drugs may get irritated and haverashesand feel itchy. Hence, some topical drugs includingnicotine patchesforsmoking cessationare advised to change places for each application to avoid continuous irritation of the skin. Also, since the drug needs to penetrate the skin, some drugs may not be able to pass through the skin. Some drugs are then “wasted” and the bioavailability of the drug will decrease.

Challenges for designing topical dosage form

Skin penetration is the main challenge for any topical dosage form. The drug needs to penetrate the skin in order to get into the body to apply its function. The drug follows the Fick's first law of diffusion.One of the most common versions ofFick's first law of diffusionis:

$J=-D{dc \over dx}$

where

• Jis thediffusion flux.
• Dis thediffusion coefficient.
• dc/dxis theconcentration gradient.

ForDis described by theStokes–Einstein equation.The equation is:

$D={\frac {RT}{6\pi \eta rN_{A}}}$

where

• Ris thegas constant.
• Tis thetemperature.
• ηis theviscosity.
• ris theradiusof the solute.
• $N_{A}$is theAvogadro constant.

Assumingconcentration gradientis constant for all newly applied topical drugs and the temperature is constant (normal body temperature: 37 °C), the viscosity and radius of the drug determine the flux of diffusion. The higher theviscosityor the larger the radius of the drug is, the lower thediffusion fluxof the drug is.

New developments

There are many factors for drug developers to consider in developing new topical formulations.

The first one is the effect of the drug vehicle. The medium to carry the topical drugs can affect the penetration of the drugactive ingredientandefficacy.For example, this carrier can have a cooling, drying, emollient or protective action to suit the required conditions of the application site such as applyinggelorlotionfor hairy areas. Meanwhile, scientists need to match the type of preparation with the type of lesions. For example, they need to avoid oilyointmentsfor acute weepydermatitis.Chemists also need to consider theirritationor anysensitizationpotential to ensure that the topical application can be stable during storage and transport to maintain its efficacy.Another potential material is nanofiber-based dispersion to improve the adhesion of active ingredients on the skin.

In order to enhance drug penetration into the skin, scientists have several ways to achieve their purposes by using chemical, biochemical, physical andsuper saturationenhancement. Advanced Emulgel technology is a breakthrough of painkilling topical drugs.It helps the gel to enter deeply down the skin layer to strengthen delivery of diclofenac to the point of pain so as to achieve bettertherapeutic effectsby modifying the above properties.

See also

• Finger tip unit
• Liniment
• Topical anesthetic
• Topical antibiotic
• Topical corticosteroids
• Unguent

References

• Goodman & Gilman's The Pharmacological Basis of Therapeutics
• Dr. David Edwards – Dentistry Microbiology Lecture series

External links

• History of ointments