Jump to content

FMA IA 36 Cóndor

From Wikipedia, the free encyclopedia
I.A. 36 Cóndor
IA 36 wind tunnel model
Role Narrow-body jet airliner
Manufacturer FMA/IAME
Designer Kurt Tank
First flight Not flown
Status Cancelled

The IA 36 Cóndor (English: Condor) was a projected Argentine jet propelled mid-range airliner, designed in the early 1950s by Kurt Tank for the “Fábrica Militar de Aviones”. It was cancelled in 1958, with no prototypes built, but a full size wood mockup.

Design and development

[edit]

Work on the IA 36 Cóndor project started in late 1951 by a team led by the German engineer Kurt Tank; as part of the project a 1:34 scale wind tunnel model was built, as well as a 1:1 scale wooden fuselage mock-up. The project was cancelled in 1958 by the government led by Pedro Eugenio Aramburu, which followed that of Juan Domingo Perón, deposed in 1955 by the now quite infamous Revolución Libertadora uprising.[1]

The projected aircraft would have been powered by five Rolls-Royce "Nene II" turbojets arranged in an annular configuration around the rear fuselage, as in Messerschmitt P.1110 and Heinkel He 211; however it was planned to replace those with lighter and more powerful engines in later versions.[2]

The engine configuration had many drawbacks. To start with, the engine compartment inlet: as air flows over the fuselage a boundary layer builds up due to friction with the fuselage surface. This boundary layer has less energy than the air in the airstream further away from the aircraft. Notice the location of aft engines on the Boeing 727, Douglas DC-9, BAC111 and Sud Aviation Caravelle. These aircraft all have the engines mounted outside the boundary layer as far as possible. The Condor's engines would have received much less ram air pressure at the inlet, because the inlet design brought in air close to the fuselage and far back, where the boundary layer would he near its maximum. The engine location would have been a significant safety risk. If one engine caught fire there would be a greater likelihood of the other engines catching fire, and throwing a compressor or turbine blade would be more likely to affect the other engines. Note the efforts of other designs to mount engines away from each other and the aircraft itself.

The design would have accommodated 32 to 40 passengers; the maximum speed was expected to be 950 km/h (590 mph); in comparison, the contemporary de Havilland Comet 3 maximum speed was 780 km/h (480 mph). Like the Pulqui II fighter prototype, also designed by Tank, the IA 36 had swept wings which would have increased the aerodynamic efficiency. The wingspan was 34 m (112 ft); and the estimated range was 5,000 km (3,100 mi; 2,700 nmi).[1]

Specifications

[edit]

Data from [1]

General characteristics

  • Crew: 3-4
  • Capacity: 32-40 passengers
  • Wingspan: 34 m (111 ft 7 in)
  • Powerplant: 5 × Rolls-Royce Nene centrifugal-flow turbojet engines

Performance

  • Maximum speed: 950 km/h (590 mph, 510 kn)
  • Range: 5,000 km (3,100 mi, 2,700 nmi)

See also

[edit]

Aircraft of comparable role, configuration, and era

Related lists

References

[edit]

Notes

[edit]
  1. ^ a b c "Aviones fabricados y proyectados desde 1943 hasta la Revolución Libertadora – I.A.36 Cóndor" (in Spanish). Archived from the original on 2 April 2012. Retrieved 20 March 2012.
  2. ^ Burzaco, Ricardo; Rivas, Santiago; Cicalesi, Juan Carlos (2007). Las alas de Perón II : la aeronáutica argentina 1945-1960 (in Spanish) ([2nd ed.]. ed.). Banfield [Argentina]: Ediciones Eugenio B. ISBN 978-987-96764-4-8.

Further reading

[edit]
  • Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions.
[edit]