IEEE 802.1ah

IEEE 802.1ahis an amendment to theIEEE 802.1Qnetworkingstandard which adds support forProvider Backbone Bridges.It includes an architecture and a set of protocols for routing over a provider's network, allowing interconnection of multipleprovider bridge networkswithout losing each customer's individually definedVLANs.It was initially created byNortelbefore being submitted to theIEEE 802.1committee for standardization. The final version was approved by theIEEEin June 2008 and has been integrated into IEEE 802.1Q-2011.

History

The now-ubiquitousEthernetwas initially defined as alocal area network(LAN) technology to interconnect the computers within a small organization in which these host computers were very close in proximity to each other. Over the years, Ethernet has become such a popular technology that it became the default Data Link Layer (OSI Layer 2) mechanism for data transport. This created a need for extending the Ethernet from a customer LAN bridging domain to service provider MAN, also known as the Provider bridging domain. For this, a 4 byte S-Tag or Service Tag, a type of Virtual LAN tag, was added to the header of the Ethernet frame inIEEE 802.1adstandard. In the service provider domain, switching was based on S-Tag and destination MAC address, and C-tag was used to create virtual LAN within the customer domain. This technology is also known as QinQ or Q-tunneling.

QinQ does not offer true separation of customer and provider domains but is merely a way to overcome the limitations on the VLAN identifier space. It can also help in separation of the customer and provider control domains when used with other features like control protocol tunneling or Per-VLAN Spanning Tree etc. There is still the problem of having too little control on the MAC addresses, since QinQ forwarding is still based on the customer destination addresses. Thus, better mechanisms are needed.

Description

The idea of PBB is to offer complete separation of customer and provider domains. For this purpose, a new Ethernet header has been defined. This header may take multiple different forms, but the main components of the header are:

Offsets	Octet	0	1	2	3
0	0	Backbone destination address (B-DA)
4	32	Backbone destination address (B-DA)		Backbone source address (B-SA)
8	64	Backbone source address (B-SA)
12	96	Backbone VLAN EtherType (0x88A8)		Backbone VLAN identifier (B-VID)
16	128	MIM EtherType (0x88E7)		MIM Flags	MIM Service identifier (I-SID)
20	160	MIM Service identifier (I-SID)		Customer destination address (C-DA)
24	192	Customer destination address (C-DA)
28	224	Customer source address (C-SA)
32	256	Customer source address (C-SA)		Customer VLAN EtherType (0x8100)
36	288	Customer VLAN identifier (C-VID)		Customer payload EtherType (e.g. 0x0800)
40	320	Customer payload (e.g. IPv4 / TCP / HTTP)

MIM Flags

They are (in order, from most significant to least significant):

• bits [7:5]: Priority Code Point (PCP)
• bits [4:4]: Drop Eligible Indicator (DEI)
• bits [3:3]: No Customer Access (NCA); e.g. OAM frames
• bits [2:2]: Reserved1 (RES1)
• bits [1:0]: Reserved2 (RES2)

PBB defines a 48-bit B-DA and 48-bit B-SA to indicate the backbone source and destination MAC addresses. It also defines a 12-bit B-VID (backbone VLAN ID) and 24-bit I-SID (Service Instance VLAN ID). The bridges in the PBB domain switch based on the B-VID and B-DA values, which contain 60 bits total. Bridges learn based on the B-SA and ingress port value and hence is completely unaware of the customer MAC addresses. I-SID allows distinguishing the services within a PBB domain.

PBB is the foundation for theIEEE 802.1QayPBB-TE standard, which was standardized in 2009.

PBB is sometimes referred to as MAC-in-MAC.

See also

• Carrier Ethernet
• IEEE 802.1
• IEEE 802.1aq,Shortest Path Bridging
• Metro Ethernet

External links

• http:// ieee802.org/1/pages/802.1ah.html
• The right transport foundation for carrier Ethernet services