Primer (molecular biology)

For other uses, seePrimer.

The DNA replication fork. RNA primer labeled at top.

Aprimeris a short, single-strandednucleic acidused by all living organisms in the initiation ofDNA synthesis.Asyntheticprimer may also be referred to as anoligo,short for oligonucleotide.DNA polymerase(responsible for DNA replication) enzymes are only capable of addingnucleotidesto the3’-endof an existing nucleic acid, requiring a primer be bound tothe templatebefore DNA polymerase can begin a complementary strand.DNA polymerase adds nucleotides after binding to the RNA primer and synthesizes the whole strand. Later, the RNA strands must be removed accurately and replace them with DNA nucleotides forming a gap region known as a nick that is filled in using an enzyme called ligase.The removal process of the RNA primer requires several enzymes, such as Fen1, Lig1, and others that work in coordination with DNA polymerase, to ensure the removal of the RNA nucleotides and the addition of DNA nucleotides. Living organisms use solely RNA primers, while laboratory techniques inbiochemistryandmolecular biologythat requirein vitroDNA synthesis (such asDNA sequencingandpolymerase chain reaction) usually use DNA primers, since they are more temperature stable. Primers can be designed in laboratory for specific reactions such as polymerase chain reaction (PCR). When designing PCR primers, there are specific measures that must be taken into consideration, like the melting temperature of the primers and the annealing temperature of the reaction itself. Moreover, the DNA binding sequence of the primer in vitro has to be specifically chosen, which is done using a method called basic local alignment search tool (BLAST) that scans the DNA and finds specific and unique regions for the primer to bind.

RNA primersin vivo

Further information:DNA polymeraseandDNA replication

RNA primers are used by living organisms in theinitiationofsynthesizinga strand ofDNA.A class of enzymes calledprimasesadd a complementary RNA primer to the reading templatede novoon both theleadingandlagging strands.Starting from the free 3’-OH of the primer, known as the primer terminus, a DNA polymerase can extend a newly synthesized strand. Theleading strandin DNA replication issynthesizedin one continuous piece moving with thereplication fork,requiring only an initial RNA primer to begin synthesis. In the lagging strand, the template DNA runs in the5′→3′ direction.SinceDNA polymerasecannot add bases in the 3′→5′ direction complementary to the template strand, DNA is synthesized ‘backward’ in short fragments moving away from the replication fork, known asOkazaki fragments.Unlike in the leading strand, this method results in the repeated starting and stopping of DNA synthesis, requiring multiple RNA primers. Along the DNA template,primaseintersperses RNA primers that DNA polymerase uses to synthesize DNA from in the 5′→3′ direction.

Another example of primers being used to enable DNA synthesis isreverse transcription.Reverse transcriptase is an enzyme that uses a template strand of RNA to synthesize a complementary strand of DNA. The DNA polymerase component of reverse transcriptase requires an existing 3' end to begin synthesis.

Primer removal

After the insertion ofOkazaki fragments,the RNA primers are removed (the mechanism of removal differs betweenprokaryotesandeukaryotes) and replaced with newdeoxyribonucleotidesthat fill the gaps where the RNA primer was present.DNA ligasethen joins the fragmented strands together, completing the synthesis of the lagging strand.

In prokaryotes, DNA polymerase I synthesizes the Okazaki fragment until it reaches the previous RNA primer. Then the enzyme simultaneously acts as a5′→3′ exonuclease,removing primerribonucleotidesin front and addingdeoxyribonucleotidesbehind. Both the activities of polymerization and excision of the RNA primer occur in the5′→3′direction, and polymerase I can do these activities simultaneously; this is known as “Nick Translation”.Nick translation refers to the synchronized activity of polymerase I in removing the RNA primer and addingdeoxyribonucleotides.Later, a gap between the strands is formed called a nick, which is sealed using aDNA ligase.

In eukaryotes the removal of RNA primers in thelagging strandis essential for the completion of replication. Thus, as the lagging strand being synthesized byDNA polymerase δin5′→3′direction,Okazaki fragmentsare formed, which are discontinuous strands of DNA. Then, when the DNA polymerase reaches to the 5’ end of the RNA primer from the previous Okazaki fragment, it displaces the 5′ end of the primer into a single-stranded RNA flap which is removed by nuclease cleavage. Cleavage of the RNA flaps involves three methods of primer removal.The first possibility of primer removal is by creating a short flap that is directly removed byflap structure-specific endonuclease 1(FEN-1), which cleaves the 5’ overhanging flap. This method is known as the short flap pathway of RNA primer removal.The second way to cleave a RNA primer is by degrading the RNA strand using aRNase,in eukaryotes it’s known as the RNase H2. This enzyme degrades most of the annealed RNA primer, except the nucleotides close to the 5’ end of the primer. Thus, the remaining nucleotides are displayed into a flap that is cleaved off using FEN-1. The last possible method of removing RNA primer is known as the long flap pathway.In this pathway several enzymes are recruited to elongate the RNA primer and then cleave it off. The flaps are elongated by a 5’ to 3’helicase,known asPif1.After the addition of nucleotides to the flap by Pif1, the long flap is stabilized by thereplication protein A(RPA). The RPA-bound DNA inhibits the activity or recruitment of FEN1, as a result another nuclease must be recruited to cleave the flap.This second nuclease isDNA2 nuclease,which has a helicase-nuclease activity, that cleaves the long flap of RNA primer, which then leaves behind a couple of nucleotides that are cleaved by FEN1. At the end, when all the RNA primers have been removed, nicks form between theOkazaki fragmentsthat are filled-in withdeoxyribonucleotidesusing an enzyme known asligase1,through a process calledligation.

Uses of synthetic primers

Diagrammatic representation of the forward and reverse primers for a standardPCR

For the organic chemistry involved, seeOligonucleotide synthesis.For possible methods involving primers, seeNucleic acid methods.

Synthetic primers, sometimes known as oligos, arechemically synthesized oligonucleotides,usually of DNA, which can be customized toannealto a specific site on the template DNA. In solution, the primer spontaneouslyhybridizeswith the template throughWatson-Crick base pairingbefore being extended by DNA polymerase. The ability to create and customize synthetic primers has proven an invaluable tool necessary to a variety of molecular biological approaches involving the analysis of DNA. Both theSanger chain termination methodand the “Next-Gen”method of DNA sequencing require primers to initiate the reaction.

PCR primer design

Thepolymerase chain reaction(PCR) uses a pair of custom primers to direct DNA elongation toward each other at opposite ends of the sequence being amplified. These primers are typically between 18 and 24 bases in length and must code for only the specific upstream and downstream sites of the sequence being amplified. A primer that can bind to multiple regions along the DNA will amplify them all, eliminating the purpose of PCR.

A few criteria must be brought into consideration when designing a pair of PCR primers. Pairs of primers should have similar melting temperatures since annealing during PCR occurs for both strands simultaneously, and this shared melting temperature must not be either too much higher or lower than the reaction'sannealing temperature.A primer with aT_m(melting temperature) too much higher than the reaction's annealing temperature may mishybridize and extend at an incorrect location along the DNA sequence. AT_msignificantly lower than the annealing temperature may fail to anneal and extend at all.

Additionally, primer sequences need to be chosen to uniquely select for a region of DNA, avoiding the possibility of hybridization to a similar sequence nearby. A commonly used method for selecting a primer site isBLASTsearch, whereby all the possible regions to which a primer may bind can be seen. Both the nucleotide sequence as well as the primer itself can be BLAST searched. The freeNCBItool Primer-BLAST integrates primer design and BLAST search into one application,as do commercial software products such as ePrime andBeacon Designer.Computer simulations of theoretical PCR results (Electronic PCR) may be performed to assist in primer design by giving melting and annealing temperatures, etc.

As of 2014, many online tools are freely available for primer design, some of which focus on specific applications of PCR. Primers with high specificity for a subset of DNA templates in the presence of many similar variants can be designed using by some software (e.g.DECIPHER) or be developed independently for a specific group of animals.

Selecting a specific region of DNA for primer binding requires some additional considerations. Regions high in mononucleotide and dinucleotide repeats should be avoided, as loop formation can occur and contribute to mishybridization. Primers should not easily anneal with other primers in the mixture; this phenomenon can lead to the production of 'primer dimer' products contaminating the end solution. Primers should also not anneal strongly to themselves, as internal hairpins and loops could hinder the annealing with the template DNA.

When designing primers, additional nucleotide bases can be added to the back ends of each primer, resulting in a customized cap sequence on each end of the amplified region. One application for this practice is for use inTA cloning,a special subcloning technique similar to PCR, where efficiency can be increased by adding AG tails to the 5′ and the 3′ ends.

Degenerate primers

Main article:Degenerate bases

Some situations may call for the use ofdegenerate primers.These are mixtures of primers that are similar, but not identical. These may be convenient when amplifying the samegenefrom differentorganisms,as the sequences are probably similar but not identical. This technique is useful because thegenetic codeitself isdegenerate,meaning several differentcodonscan code for the sameamino acid.This allows different organisms to have a significantly different genetic sequence that code for a highly similar protein. For this reason, degenerate primers are also used when primer design is based onprotein sequence,as the specific sequence of codons are not known. Therefore, primer sequence corresponding to theamino acidisoleucinemight be "ATH", where A stands foradenine,T forthymine,and H foradenine,thymine,orcytosine,according to thegenetic codefor eachcodon,using the IUPAC symbols fordegenerate bases.Degenerate primers may not perfectly hybridize with a target sequence, which can greatly reduce the specificity of the PCR amplification.

Degenerate primersare widely used and extremely useful in the field ofmicrobial ecology.They allow for the amplification of genes from thus far uncultivatedmicroorganismsor allow the recovery of genes from organisms where genomic information is not available. Usually, degenerate primers are designed by aligning gene sequencing found inGenBank.Differences among sequences are accounted for by using IUPAC degeneracies for individual bases. PCR primers are then synthesized as a mixture of primers corresponding to all permutations of the codon sequence.

See also

• Oligonucleotide synthesis– the methods by which primers are manufactured

External links

• Primer3
• Primer-BLAST