Obiekt 187

Obiekt 187
Type	Main battle tank
Place of origin	Soviet Union
Service history
In service	Never,prototypeonly
Production history
Designer	Vladimir Ivanovich Potkin (chief designer) UKBTM - Ural Design Bureau of Transport Machine-Building
Designed	late 1980s - middle 1990s
Manufacturer	Uralvagonzavod
Variants	6
Specifications
Mass	50metric tons
Crew	3
Armour	950 mm (maximum physical thickness, not counting the reactive armor) Composite armour/reactive armour (turret and hull front) Rolled homogeneous armour (rest of the tank)
Main armament	125 mm 2A66 smoothbore tank gun (48caliberslong barrel)
Secondary armament	7.62 mm coaxialPKTmachine gun 12.7 mmNSVTheavy machine gun
Engine	А-85-2 diesel engine 1200 hp

Object 187(Объект 187), was aSovietexperimentalmain battle tankdeveloped between the late 1980s and middle 1990s. It remains a relatively unpublicized development because of high levels of secrecy surrounding the project.

Design

The tank was fitted with cutting-edge systems and structural solutions, losing many of the traditional shortcomings of Soviet tanks. Originally the design was intended to be only a temporary solution before the development of new combat platforms.Obiekt 187was a parallel project toObiekt 188,theT-90tank. It was based on theT-72B, with a heavily modified turret. A particularly notable feature was the rejection of theT-64hull design. The redesigned layout took up more space, but positively affected ergonomics and protection from theglacis plate.Due to lengthening of the hull's nose section, the driver's position was lower, with his optics attached to the roof of the hull, unlike in the T-64 and its derivatives. This remedied a notorious weak spot of the T-64 design – the section between the turret and the hull. The same solution made it possible to arrange armouring at more rational angles of inclination as a countermeasure to modern sub-caliber armour-piercing rounds. The tank was fitted with a new welded turret, unlike traditional cast ones, fabricated using steelrolled homogeneous armour(RHA). Work on the welded turrets ofObiekt 187,Obiekt 188 (T-90) and the futureT-80UD was carried out almost simultaneously. The turret ofObiekt 187was characterized by an imposing overall size, especially in the rear section.

The 902A "Tucha" grenade launcher was fitted to deploy smoke and aerosol screens, andvehicle snorkelequipment was also installed.

Several types of power plants and transmissions were tested on the different modifications, including a gas turbine engine. The most promising of the power plants in the course of tests proved to be the 1200 hp А-85-2 engine. It was installed in a longitudinal configuration, similar to theT-34.A new undercarriage and hydraulic shock absorbers substantially increased dynamic abilities.

Main armament

During testing, some of theObiekt 187prototypes were fitted with the 125 mm (4.9 in) 2A46M smoothbore gun of theT-80B. Planned primary armament of the tank though was the ballistically improved 125 mm 2A66 (also known as D-91T)smoothboregun. Together with thetank gun,newdepleted uranium-cored sub-caliberarmour-piercing fin-stabilized discarding sabot(APFSDS) rounds were developed named Anker-1 and Anker-2, and new HEAT shells, and gun-launched anti-tank missiles.The 2A66 had a different appearance to the 2A46M. A muzzle brake was installed primarily to keep a clear line-of-sight for the missile guidance system, while also decreasing effective recoil from the more powerful new gun. The barrel was strengthened, with chamber volume increased to accommodate the larger round and incremented charge. The tank was equipped with the most advanced fire control system of the time. Something similar began to appear more widely on tanks in the late 1990s.

The 2A66 was based on the 2A46M as a transitional version between the 2A26 gun and the new generation 2A82 smoothbore gun.The 125 mm 2A82 was tested earlier (late 1970s) on the experimental tankObiekt 785.Obiekt 785 was also tested with a 130 mm rifled gun. WhileObiekt 187was in development work on yet another experimental tank was also in progress. This was theObiekt 292,armed with a much more powerful 152.4 mm rifled gun. Similar projects, mainly for up-arming, existed in Western countries. A few years prior toObiekt 187,the US developed theCATTBM1 variant, armed with a 140 mm gun. Some years later, Germany developed theLeopard 2-140,armed again with a 140 mm gun. Later, the Swiss developed thePz 87-140,armed with a 140mm gun and with additional armour. Enhancement was limited largely to armament in these programs, however, while theObiekt 187was focused on an extreme level of protection, surpassing all third generation tanks even today. New generations of tanks though potentially combine or surpassCold-Wardevelopments. The ChineseType 99KMis an example of possible superiority, armed with a powerful 125 mm gun firing next generationkinetic roundsor precision guided missiles, and using a more effectiveactive protection system.The RussianObiekt 195prototype had a level of firepower which has not been matched by many other prospective designs, including the very powerful 152 mm 2A83 smoothbore gun, and a 30 mm coaxial cannon.

Armour

TheObiekt 187usedcomposite armourfor the turret and the hull front, and RHA for the rest of the tank. The passive armour was supplemented by the new Malakhitexplosive reactive armour,a prototype of the presentRelikt,and by theShtoraactive protection system.It also had achemical, biological, radiological, and nuclear(CBRN) protection system. Maximum physical thickness of the passive armour was up to 950 mm (37 in). It possibly consisted of special materials includingceramicor high densityuraniumalloys.

History

Work on the tank was conducted by the Ural Design Bureau of Transport Machine-Building under a T-72B improvement program with an order dated June 19, 1986. Conceived as a next-generation development, it was designed to fulfil operational requirements not then met by the rest of the main battle tanks built byUralvagonzavod.Different prototypes ofObiekt 187were built in three series. Each series differed significantly from the previous, clearly demonstrating the evolution of the tank. The interior differences were less significant.

The first modification was a change to an 840 hp engine. The tank was equipped with theKontakt-5explosive reactive armour. That modification was dismantled after its trials and its hull used for the third modification. The whole power plant of the tank was later used on the Obiekt 188 (T-90).

A 1000 hp engine was installed on the second modification. Trials showed a high level of protection against contemporary weapons. The first and the second prototype series were the closest in appearance to the future T-90 tank.

The third modification was intended originally for diverse experiments testing for possible structural failure; it was never fully equipped. Unlike the first and second prototype series, the 3rd series had a new welded turret made out of RHA plates with a thickness of 40 mm each. The turret closely resembled those of theT-90S,T-90SAandT-90A.Their turret design was later based on the third prototype series turret, with its similar lowered driver position, etc. The tank was originally equipped with a 1000 hp engine, but as an experiment the 1250 hp gas-turbine engine and transmission of theT-80Uwas fitted with a corresponding change in the hydro-shock absorbers, and the result sent to trials. Trials indicated the diesel engine was superior to the gas-turbine one. AnObiekt 187prototype underwent complex tests for anti-nuclear defense at the Arzamas-16 nuclear center. This tank was equipped with the Kontakt-5 explosive reactive armour.

The fourth modification prototype was similar to the third before engine and transmission changes. It had a new, larger, welded turret. That modification was equipped with the 1200 hp А-85-2 engine. It also received the new Malakhit explosive reactive armour, a prototype of the present Relikt, withreaction platesmade of sufficiently massive titanium plates.

The fifth and sixth modifications were the most advanced. The difference between them was in the transmission. The fifth had a mechanical transmission while the sixth was using a hydro-transmission. Both modifications used the 1200 hp А-85-2 engine. The nose section of the hull was increased in size even more, and changed in form. Armour protection of the turret was significantly improved and it was increased in size again, reaching a width of 3.12 meters (without explosive reactive armour); the widest rear of all welded turret Soviet tanks. These modifications had the same Malakhit explosive reactive armour as the fourth modification, except that the reaction plates were made ofsteelinstead oftitanium.

Status

Uralvagonzavod undertook enormous efforts for this tank to be adopted, but in the end after successful trials proving high combat and technical potential, the tank was not accepted in part due to old ammunition of 2A46 not being reusable by 2A66, making costs prohibitively high. Instead, the preferred project was the Obiekt 188 (T-90), which was a symbiosis of the T-72B's hull and some of theObiekt 187's systems. According to its chief designer Vladimir Ivanovich Potkin,Obiekt 187should have become the foundation for design and production of an entire future family of Soviet tanks, and to serve as a foundation for more advanced and powerful tanks.

Even today secrecy around this tank remains. Technical data about it is largely estimated. The scale model ofObiekt 187model No. 6 remains under wraps on the Ural Design Bureau of Transport Machine-Building premises. This model was built by employees and there is a possibility it could be transferred to the armor museum of Uralvagonzavod for storage and exhibition. Persistent requests by the armor museum of Uralvagonzavod for transfer of at least oneObiekt 187for restoration and display have been rebuffed. However, according to some sources,Kubinka Tank Museumplans to conduct a repair of the remaining tanks with a subsequent open demonstration.

See also

• Obiekt 292
• Obiekt 279
• T-14 Armata