Punchcutting
![](https://upload.wikimedia.org/wikipedia/commons/thumb/b/bf/De_Vinne_1876_-_Punch_and_matrix.jpg/170px-De_Vinne_1876_-_Punch_and_matrix.jpg)
Punchcuttingis a craft used in traditionaltypographyto cut letter punches in steel as the first stage of makingmetal type.[1]Steel punches in the shape of the letter would be used to stampmatricesinto copper, which were locked into a mould shape tocast type.Cutting punches andcastingtype was the first step of traditionaltypesetting.[2]The cutting of letter punches was a highly skilled craft requiring much patience and practice. Often the designer of the type would not be personally involved in the cutting.
The initial design for type would be two-dimensional, but apunchhas depth, and the three-dimensional shape of the punch, as well as factors such as the angle and depth to which it was driven into thematrix,would affect the appearance of the type on the page. The angle of the side of the punch was particularly significant.
![](https://upload.wikimedia.org/wikipedia/commons/thumb/9/92/Tipos-de-letra_punch_and_counterpunch_%28cropped%29.jpg/220px-Tipos-de-letra_punch_and_counterpunch_%28cropped%29.jpg)
Process
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/8/8e/Cutting_a_punch_for_a_Qu_ligature.jpg/220px-Cutting_a_punch_for_a_Qu_ligature.jpg)
The punchcutter begins by transferring the outline of a letter design to one end of a steel bar. The outer shape of the punch could be cut directly, but the internal curves of a small punch were particularly difficult as it was necessary to cut deep enough and straight into the metal. While this can be done with cutting tools, a counterpunch, a type of punch used in the cutting of other punches, was often used to create thenegative spacein or around aglyph. A counterpunch could be used to create this negative space, not just where the space was completely enclosed by the letter, but in any concavity (e.g., above and below the midbar in uppercase "H" ).
Of course, the counterpunch had to be harder than the punch itself. This was accomplished byannealing(softening) the punch blank, andhardeningandtemperingthe counterpunch. Such a tool solved two issues, one technical and oneaesthetic,that arose in punchcutting.
Often the same counterpunch could be used for several letters in atypeface.For example, the negative space inside an uppercase "P"and"R"is usually very similar, and with the use of a counterpunch, they could be nearly identical. Counterpunches were regularly used in this way to give typefaces a more consistent look. The counterpunch would be struck into the face of the punch. The outer form of the letter is then shaped using files.
To test the punch, the punchcutter makes an imprint on a piece of paper after coating the punch with soot from an open flame. Thesootleft by the flame acts like ink to create an image on the paper (a smoke proof).
Once the punches are ready amoldcould then be created from the punch by using the punch on a softer metal (such ascopper) to create amatrix.Then,type metal,analloyoflead,antimony,andtin,flows into the matrix to produce a single piece of type, ready for typesetting.
One characteristic of type metal that makes it valuable for this use is that it expands as it cools (water,siliconandbismuthare other substances that expand on freezing), keeping the accurate dimensions of letters. This characteristic is shared by thebronzeused to castsculptures,but copper-based alloys generally have melting points that are too high to be convenient for typesetting.
Punched matrices were not easy to create for large fonts since it was hard to drive large punches evenly. Alternative methods such as casting type or matrices in sand, plaster or lead were used for these.[3][4][5][6]From the nineteenth century, several new technologies began to appear that displaced manual punchcutting.
Punchcutters
[edit]During the early years of printing, during which the craft and tastes were rapidly evolving, printers often cut or commissioned their own punches.[7][8]Many early printers entered the trade from metalworking and would therefore have had the skills to cut their own types:Johannes Gutenbergcame from a metalworking background, as didNicolas Jenson.As the sale of type evolved into a major, separate trade, punchcutting became a craft principally practiced by the owners or employees of type foundries, or sometimes specialised itinerant craftsmen.
The technique of punchcutting is similar to that used in other precision metalworking professions such as cutting dies to make coins, and many punchcutters entered the trade from these fields: for instance sixteenth-century theologianJean de Gagnywhen commissioning types for his private press in the 1540s, hired Charles Chiffin, known to have previously practiced as a goldsmith.[9]Among the most famous punchcutters,Robert Granjonbegan as the apprentice to a jeweller, althoughClaude Garamondwrote of cutting type since his childhood.[10][11]AlsoChristoffel van Dijckwas trained as a goldsmith.[12]In the eighteenth century,William Caslontook up the craft from engraving ornamental designs on firearms and bookbinders' tools.[13][14][15]A less common background was that ofMiklós Tótfalusi Kis,who began his career as a schoolmaster before paying to learn punchcutting while in the Netherlands to print a Hungarian bible.[16][17]There was apparently a drop in the number of engravers active in seventeenth-century France compared to the sixteenth, probably due to economic reasons and a saturation of the market with high-quality typefaces cut in the previous century;Pierre-Simon Fourniercommented that knowledge of the technique in France degenerated after the sixteenth century to the point that "a man could hardly be found to cut the JJ consonants and UU vowels when the use of them was introduced into France".[8][18]
The process of punchcutting was apparently sometimes treated as atrade secretdue to its difficulty and sometimes passed on from father to son. William Caslon was an example of this, according to Nichols teaching his son his methods privately while locked in a room where nobody could watch them.[19][20]
Manual punchcutting was a slow process that required expertise. It has been estimated that the work rate of experienced punchcutters was about one letter per day.[16][a]Some testimony to the London Society of Arts in May 1818, which was given as part of an inquiry into developing new banknote anti-forgery precautions, illustrates this.[21]PunchcutterAnthony Bessemergave testimony by letter that his work rate for punches was about 12 weeks (72 days not counting Sundays) to cut a complete set of 61 punches[b]around or less than 1 punch per day, for 4pt "diamond" -size type. His employer, Henry II Caslon of theCaslon type foundryelaborated that a font of this size "could scarcely be completed in 7 or 8 months; at present there are only 4 or 5 persons in England who can execute diamond [4pt] type, owing no doubt to the limited demand for it; and the peculiar style of each of these punch cutters is perfectly well known to persons conversant with letter founding." He estimated that a punchcutter could cut two punches of this size a day although more work would be needed to "get type from the punches".[22][21]
Punchcutters did not necessarily conceive the designs they worked on. Indeed, G. Willem Ovink, a Dutch printing executive and historian of printing, noted in 1973 that he was struck by "the absolute lack of creative talent in all the most skilled punchcutters of this century" with regard to creating their own designs, although presumably many punchcutters of the past designed and conceived the work they engraved.[23]
New technologies
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/f/f3/Gravure_de_poin%C3%A7ons_typographiques_%28a_punchcutter%27s_bench%29.jpg/220px-Gravure_de_poin%C3%A7ons_typographiques_%28a_punchcutter%27s_bench%29.jpg)
New technologies displaced manual punchcutting from the mid-nineteenth century.
Electrotypingfrom the 1840s is a technology used to form matrices of copper byelectrodepositionaround engravings of a letterform. This letterform could be in any metal, so engraving increasingly began to be done by cutting a letterform in soft typemetal.[c]This allowed an explosion in variety of typefaces, especiallydisplay typefacesthat did not need to be cast so often and for which only a few matrices were needed, and allowed the regeneration (or, often, piracy) of types for which no punches or matrices were available.[d]
Pantographengraving is a technology where a cutting machine is controlled by hand movements and allows type to be cut from large working drawings. It was initially introduced to printing to cutwood typeused for posters and headlines.[2]In the 1880s, the typefounderLinn Boyd Bentonadapted the technology to cutting very small matrices and steel punches.[2]This gave very precise results and transferred the place of individual creativity completely away from the engraving stage towards a drawing office.[2][26][27]
Some punchcutters did continue to hold prestige for their artisanal work into the early or mid-twentieth century.[2]These includedEdward Prince,who cut many types forArts and Crafts movementfine printers,Charles Malinin Paris,[28][23][29]Otto Erler in Leipzig andP. H. RädischatJoh. Enschedéin Haarlem, who cut the types ofJan van Krimpen.[30][31][32][33]Type designerMatthew Carter,who learned punchcutting from Rädisch while at an internship at Enschedé, has added commentary to a silent film of Rädisch at work in the 1950s.[34]
The FrenchImprimerie nationalewas one of the few institutions to continue employing punchcutters into the twenty-first century, to demonstrate the historic technique and to fill out the character set of historic typefaces.[35]Contemporary punchcutter Nelly Gable of the French Imprimerie Nationale is one of the few female practitioners of the art.[35]
See also
[edit]References
[edit]- ^Vret, Aurélien."Caractères de Titres".Carnet de la recherche à la Bibliothèque nationale de France(in French).Bibliothèque nationale de France.Retrieved19 August2022.
- ^abcdeTracy, Walter.Letters of Credit.pp. 32–40.
- ^Mosley, James."Big brass matrices: a mystery resolved?".Type Foundry (blog).Retrieved5 October2017.
- ^Mosley, James."Big brass matrices again: the Enschedé 'Chalcographia' type".Type Foundry (blog).Retrieved5 October2017.
- ^Mosley, James."Dabbing, abklatschen, clichage..."Type Foundry (blog).Retrieved5 October2017.
- ^"Ornamented types: a prospectus"(PDF).imimprimit. Archived fromthe original(PDF)on 22 December 2015.Retrieved12 December2015.
- ^Vervliet, Hendrik D.L.(2010).French Renaissance Printing Types: a conspectus.New Castle, Del.: Oak Knoll Press.ISBN978-1-58456-271-9.
- ^abWilliamson, Hugh (August 1987). "Jean Jannon of Sedan (series of articles)".Bulletin of the Printing Historical Society.
[On printerJean Jannon,who took up punchcutting letters in his thirties]: Part of Jannon's apprenticeship must have been strenuously devoted to punch-cutting and to other metal-working skills he would need for this task...some of the early printers are known to have cut their own punches and some printers are known to have done some punchcutting, but punchcutters were usually independent craftsmen.
- ^Vervliet, Hendrik D.L. (2008).The Palaeotypography of the French Renaissance.Leiden: Koninklijke Brill NV. pp. 316–7.ISBN978-90-04-16982-1.
Gagny had his new types engraved by a goldsmith from Tours, Charles Chiffin…otherwise unknown as a typographer, [he] delivered decent work. [Chiffin's] colon and period [are] lozenge-shaped - possibly an indication that Chiffin had been influenced by or trained in cutting Gothic types.
- ^Warde, Beatrice(1926)."The 'Garamond' Types".The Fleuron:131–179.
- ^Lane, John A.(2005). "Claude Garamont and his Roman Types".Garamond Premier Pro: a contemporary adaptation; modelled on the roman types of Claude Garamond and the italic types of Robert Granjon.San Jose: Adobe Systems. pp. 5–13.
- ^Lane, John A.(2012).The Diaspora of Armenian Printing, 1512-2012.Amsterdam: Special Collections of the University of Amsterdam. pp. 70–86.ISBN9789081926409.
- ^Mosley, James (1967). "The Early Career of William Caslon".Journal of the Printing Historical Society:66–81.
- ^Carter, Harry (1965). "Caslon Punches: An Interim Note".Journal of the Printing Historical Society.3:68–70.
- ^Mosley, James (1984).British type specimens before 1831: a hand-list.Oxford Bibliographical Society. p. 69.
- ^abLane, John(1983). "The Types of Nicholas Kis".Journal of the Printing Historical Society:47–75.
- ^Stauffacher, Jack (1985)."The Transylvanian Phoenix: the Kis-Janson Types in the Digital Era".Visible Language.19(1): 61–76. Archived fromthe originalon 30 December 2017.Retrieved19 May2017.
- ^abMosley, Jamea(1965).An Introduction to Pierre Simon Fournier's Modèles des Caractères de l'Imprimerie.London: Eugrammia Press.
- ^Mosley, James (2008). "William Caslon the elder".Oxford Dictionary of National Biography.
- ^Musson, A.E. (2013).Trade Union and Social History.Hoboken: Taylor and Francis. p. 138.ISBN9781136614712.
- ^abNash, Paul W. (2004). "Hansard's typographical banknote".Journal of the Printing Historical Society:55–70.
- ^Report of the Committee of the Society of Arts (etc.) Together with the Approved Communications and Evidence Upon the Same, Relative to the Mode of Preventing the Forgery of Bank Notes.1819. pp. 68–9.
- ^abOvink, G.W. (1 January 1973). "Two Books on Stanley Morison".Quaerendo.3(3): 226–242.doi:10.1163/157006973X00237.
- ^MacMillan, David."Patrix Cutting and Matrix Electroforming: A Survey of the Data".Circuitous Root.Retrieved6 October2017.
- ^Howes, Justin (2000). "Caslon's punches and matrices".Matrix.20:1–7.
- ^Morison, Stanley."Printing the Times".Eye.Retrieved28 July2015.
- ^"Monotype matrices and moulds in the making"(PDF).Monotype Recorder.40(3). 1956.
- ^Dreyfus, John (1994). "Giovanni Mardersteig's work as a Type Designer".Into Print: selected writings on printing history, typography and book production.London: British Library.ISBN9780712303439.
- ^Wardle, Tiffany (2000).The story of Perpetua(PDF).University of Reading.p. 5. Archived fromthe original(PDF)on 2006-11-10.Retrieved2009-03-26.
- ^Ovink, G. Willem (1973). "Review: Jan van Krimpen, A Letter to Philip Hofer".Quaerendo:239–242.doi:10.1163/157006973X00237.
- ^Ovink, G. Willem (1 January 1980). "Grandeurs and Miseries of the Punch-Cutter's Craft: a review ofA to Z. Een autobiografie van P.H. Rädisch, staal-stempelsnijder".Quaerendo.10(2): 158–172.doi:10.1163/157006980X00149.
- ^Lane, John A.(1991). "Twentieth-Century Punchcutters".Matrix(7–23).
- ^Reynolds, Dan."My notes on the punchcutter Otto Erler".TypeOff.Retrieved11 June2018.
- ^Haley, Allan."Gravers & Files".Fonts.Retrieved11 June2018.
- ^ab"Punch-cutter Nelly Gable: Steel Magnolia of the Imprimerie Nationale".Design Traveler.Retrieved5 May2017.
- Baines, Phil and Haslam, Andrew (2002).Type and Typography.Watson-Guptill.ISBN0-8230-5524-8.
- Smeijers, Fred(1997).Counterpunch: Making Type in the 16th Century, Designing Typefaces Now.Princeton Architectural Press.ISBN0-907259-06-5.
- ^The apparent work rate of punchcutter and typefounderPierre-Simon Fournierin the late eighteenth century, as documented in his specimens, was so rapid that twentieth-century printing historianHarry Cartersuggested that he had actually only engraved the characters needed to print his specimens, with the remaining characters filled in later.[18]
- ^How Bessemer and Caslon came to a total of 61 is not explained.
- ^Various names were used for the 'punch' in soft metal carved for an electrotype. "Pattern letter" and "patrix" are common terms.[24]Electrotyping was also used less honourably for piracy of pre-existing types.
- ^A slight problem with electrotyping of type is that the new form is slightly smaller than the original - according toJustin Howes,the calculation of theStephenson Blaketype foundry was that the shrinkage was small but could accumulate if a letterform was repeatedly regenerated. Stephenson Blake's solution was to squash type slightly in a press or file it down to broaden it before putting it into the electrotype bath.[25]
External links
[edit]- Punchcutting demonstrationby Stan Nelson
- Gravers & Files—The lost art of type punch cutting- a silent film of punchcutter P. H. Rädisch at Enschedé, one of the last working punchcutters, in 1957, by which time the process was already a niche activity. Narration and commentary byMatthew Carter,who was taught by him.