Jump to content

Thin-film optics

From Wikipedia, the free encyclopedia
Dichroic filtersare created using thin film optics.
Thin film interferencecaused byITOdefrosting coating on anAirbuscockpit window. The film thickness is intentionally non-uniform to provide even heating at different distances from the electrodes.
A pattern of coloured light formed byinterferencebetween white light being reflected from the surface of a thin film of diesel fuel on the surface of water, and the diesel-water interface.
Hafniumoxidized ingots which exhibits thin film optical effects.

Thin-film opticsis the branch ofopticsthat deals with very thin structured layers of different materials.[1]In order to exhibit thin-film optics, the thickness of the layers of material must be similar to thecoherence length;for visible light it is most often observed between 200 and 1000nmof thickness. Layers at this scale can have remarkable reflective properties due to light waveinterferenceand the difference inrefractive indexbetween the layers, the air, and the substrate. These effects alter the way the opticreflectsandtransmitslight. This effect, known asthin-film interference,is observable insoap bubblesand oil slicks.

More general periodic structures, not limited to planar layers, exhibitstructural colorationwith more complex dependence on angle, and are known asphotonic crystals.

In manufacturing,thin filmlayers can be achieved through thedepositionof one or more thin layers of material onto a substrate (usuallyglass). This is most often done using aphysical vapor depositionprocess, such asevaporation depositionorsputter deposition,or a chemical process such aschemical vapor deposition.

Thin films are used to createoptical coatings.Examples includelow emissivitypanes ofglassfor houses and cars,anti-reflective coatingsonglasses,reflective baffles on car headlights, and for high precisionoptical filtersandmirrors.Another application of these coatings isspatial filtering.[2]

Examples in the natural world

[edit]

Thin-film layers are common in the natural world. Their effects produce colors seen in soap bubbles and oil slicks, as well as thestructural colorationof some animals. The wings of many insects act as thin-films, because of their minimal thickness. This is clearly visible in the wings of many flies and wasps. In butterflies, the thin-film optics is visible when wing itself is not covered by wing scales, which is the case in the blue wing spots of theAglais ioand the blue-green patches of theGraphium sarpedon.[3]Inbuttercups,the flower's gloss is due to a thin-film, which enhances the flower's visibility topollinatinginsects and aids in temperature regulation of the plant's reproductive organs.[5]

See also

[edit]

References

[edit]
  1. ^Knittl, Z. (1981).Optics of thin films.John Wiley.
  2. ^Moreno, Ivan; Araiza, JJ; Avendano-Alejo, M (2005). "Thin-film spatial filters".Optics Letters.30(8): 914–6.Bibcode:2005OptL...30..914M.doi:10.1364/OL.30.000914.PMID15865397.S2CID2259478.
  3. ^abcStavenga, D. G. (2014). "Thin Film and Multilayer Optics Cause Structural Colors of Many Insects and Birds".Materials Today: Proceedings.1:109–121.doi:10.1016/j.matpr.2014.09.007.
  4. ^Stavenga, D. G.; Leertouwer, H. L.; Marshall, N. J.; Osorio, D. (2010)."Dramatic colour changes in a bird of paradise caused by uniquely structured breast feather barbules".Proceedings of the Royal Society B: Biological Sciences.278(1715): 2098–104.doi:10.1098/rspb.2010.2293.PMC3107630.PMID21159676.
  5. ^abvan der Kooi, C.J.; Elzenga, J.T.M.; Dijksterhuis, J.; Stavenga, D.G. (2017)."Functional optics of glossy buttercup flowers".Journal of the Royal Society Interface.14(127): 20160933.doi:10.1098/rsif.2016.0933.PMC5332578.PMID28228540.
  6. ^Buttercups focus light to heat their flowers and attract insectsNew Scientist25 February 2017

Further reading

[edit]