Wave power
Part of a series on |
Renewable energy |
---|
![]() |
Part of a series on |
Sustainable energy |
---|
![]() |
Wave poweris the capture of energy ofwind wavesto do usefulwork– for example,electricity generation,water desalination,orpumpingwater. A machine that exploits wavepoweris awave energy converter(WEC).
Waves are generated primarily by wind passing over the sea's surface and also by tidal forces, temperature variations, and other factors. As long as the waves propagate slower than the wind speed just above, energy is transferred from the wind to the waves. Air pressure differences between the windward and leeward sides of a wavecrestand surface friction from the wind causeshear stressand wave growth.[1]
Wave power as a descriptive term is different fromtidal power,which seeks to primarily capture the energy of the current caused by the gravitational pull of the Sun and Moon. However, wave power and tidal power are not fundamentally distinct and have significant cross-over in technology and implementation. Other forces can createcurrents,includingbreaking waves,wind,theCoriolis effect,cabbeling,andtemperatureandsalinitydifferences.
As of 2023, wave power is not widely employed for commercial applications, after a long series of trial projects. Attempts to use this energy began in 1890 or earlier,[2]mainly due to its highpower density.Just below the ocean's water surface the wave energy flow, in time-average, is typically five times denser than the wind energy flow 20 m above the sea surface, and 10 to 30 times denser than the solar energy flow.[3]
In 2000 the world's first commercial wave power device, theIslay LIMPETwas installed on the coast ofIslayin Scotland and connected to theUK national grid.[4]In 2008, the first experimental multi-generatorwave farmwas opened in Portugal at theAguçadoura wave park.[5]Both projects have since ended.
Wave energy converters can be classified based on their working principle as either:[6][7]
- oscillating water columns (with air turbine)
- oscillating bodies (with hydroelectric motor, hydraulic turbine, linear electrical generator)
- overtopping devices (with low-head hydraulic turbine)
History
[edit]The first known patent to extract energy from ocean waves was in 1799, filed in Paris byPierre-Simon Girardand his son.[8]An early device was constructed around 1910 by Bochaux-Praceique to power his house inRoyan,France.[9]It appears that this was the first oscillating water-column type of wave-energy device.[10]From 1855 to 1973 there were 340 patents filed in theUKalone.[8]
Modern pursuit of wave energy was pioneered byYoshio Masuda's 1940s experiments.[11]He tested various concepts, constructing hundreds of units used to power navigation lights. Among these was the concept of extracting power from the angular motion at the joints of an articulated raft, which Masuda proposed in the 1950s.[12]
Theoil crisis in 1973renewed interest in wave energy. Substantial wave-energy development programmes were launched by governments in several countries, in particular in the UK, Norway and Sweden.[3]Researchers re-examined waves' potential to extract energy, notablyStephen Salter,Johannes Falnes,Kjell Budal,Michael E. McCormick,David Evans,Michael French,Nick Newman,andC. C. Mei.
Salter's1974 inventionbecame known asSalter's duckornodding duck,officially the Edinburgh Duck. In small-scale tests, the Duck's curvedcam-like body can stop 90% of wave motion and can convert 90% of that to electricity, giving 81% efficiency.[13]In the 1980s, several other first-generation prototypes were tested, but as oil prices ebbed, wave-energy funding shrank.Climate changelater reenergized the field.[14][3]
The world's first wave energy test facility was established inOrkney,Scotland in 2003 to kick-start the development of a wave and tidal energy industry. TheEuropean Marine Energy Centre(EMEC)has supported the deployment of more wave and tidal energy devices than any other single site.[15]Subsequent to its establishment test facilities occurred also in many other countries around the world, providing services and infrastructure for device testing.[16]
The £10 million Saltire prize challenge was to be awarded to the first to be able to generate 100 GWh from wave power over a continuous two-year period by 2017 (about 5.7 MW average).[17]The prize was never awarded. A 2017 study byStrathclyde UniversityandImperial Collegefocused on the failure to develop "market ready" wave energy devices – despite a UK government investment of over £200 million over 15 years.[18]
Public bodies have continued and in many countries stepped up the research and development funding for wave energy during the 2010s. This includes both EU, US and UK where the annual allocation has typically been in the range 5-50 million USD.[19][20][21][22][23]Combined with private funding, this has led to a large number of ongoing wave energy projects (seeList of wave power projects).
Physical concepts
[edit]Like most fluid motion, the interaction between ocean waves and energy converters is a high-order nonlinear phenomenon. It is described using theincompressible Navier-Stokes equations whereis the fluid velocity,is thepressure,thedensity,theviscosity,andthe net external force on each fluid particle (typicallygravity). Under typical conditions, however, the movement of waves is described byAiry wave theory,which posits that
- fluid motion is roughlyirrotational,
- pressure is approximately constant at the water surface, and
- theseabeddepth is approximately constant.
In situations relevant for energy harvesting from ocean waves these assumptions are usually valid.
Airy equations
[edit]The first condition implies that the motion can be described by avelocity potential:[24]which must satisfy theLaplace equation,In an ideal flow, the viscosity is negligible and the only external force acting on the fluid is the earth gravity.In those circumstances, theNavier-Stokes equationsreduces towhich integrates (spatially) to theBernoulli conservation law:
Linear potential flow theory
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/0/06/Wave_motion-i18n-mod.svg/220px-Wave_motion-i18n-mod.svg.png)
A= At deep water. Thecircular motionmagnitude of fluid particles decreases exponentially with increasing depth below the surface.
B= At shallow water (ocean floor is now at B). The elliptical movement of a fluid particle flattens with decreasing depth.
1= Propagation direction.
2= Wave crest.
3= Wave trough.
When considering small amplitude waves and motions, the quadratic termcan be neglected, giving the linear Bernoulli equation,and third Airy assumptions then implyThese constraints entirely determinesinusoidalwave solutions of the formwheredetermines thewavenumberof the solution andandare determined by the boundary constraints (and). Specifically,The surface elevationcan then be simply derived asa plane wave progressing along the x-axis direction.
Consequences
[edit]Oscillatory motionis highest at the surface and diminishes exponentially with depth. However, forstanding waves(clapotis) near a reflecting coast, wave energy is also present as pressure oscillations at great depth, producingmicroseisms.[1]Pressure fluctuations at greater depth are too small to be interesting for wave power conversion.
The behavior of Airy waves offers two interesting regimes: water deeper than half the wavelength, as is common in the sea and ocean, and shallow water, with wavelengths larger than about twenty times the water depth. Deep waves aredispersionful:Waves of long wavelengths propagate faster and tend to outpace those with shorter wavelengths. Deep-water group velocity is half thephase velocity.Shallow water waves are dispersionless: group velocity is equal to phase velocity, andwavetrainspropagate undisturbed.[1][25][26]
The following table summarizes the behavior of waves in the various regimes:
quantity | symbol | units | deep water (h>1⁄2λ) |
shallow water (h< 0.05λ) |
intermediate depth (allλandh) |
---|---|---|---|---|---|
phase velocity | m / s | ||||
group velocity[a] | m / s | ||||
ratio | – | ||||
wavelength | m | for given periodT,the solution of: | |||
general | |||||
wave energy density | J / m2 | ||||
wave energyflux | W / m | ||||
angularfrequency | rad/ s | ||||
wavenumber | rad / m |
Wave power formula
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/3/32/Orbital_wave_motion-Wiegel_Johnson_ICCE_1950_Fig_6.png/220px-Orbital_wave_motion-Wiegel_Johnson_ICCE_1950_Fig_6.png)
In deep water where the water depth is larger than half thewavelength,the waveenergy fluxis[b]
withPthe wave energy flux per unit of wave-crest length,Hm0thesignificant wave height,Tethe wave energyperiod,ρthe waterdensityandgtheacceleration by gravity.The above formula states that wave power is proportional to the wave energy period and to thesquareof the wave height. When the significant wave height is given in metres, and the wave period in seconds, the result is the wave power in kilowatts (kW) per metre ofwavefrontlength.[28][29][30][31]
For example, consider moderate ocean swells, in deep water, a few km off a coastline, with a wave height of 3 m and a wave energy period of 8 s. Solving for power produces
or 36 kilowatts of power potential per meter of wave crest.
In major storms, the largest offshore sea states have significant wave height of about 15 meters and energy period of about 15 seconds. According to the above formula, such waves carry about 1.7 MW of power across each meter of wavefront.
An effective wave power device captures a significant portion of the wave energy flux. As a result, wave heights diminish in the region behind the device.
Energy and energy flux
[edit]In asea state,themeanenergy densityper unit area ofgravity waveson the water surface is proportional to the wave height squared, according to linear wave theory:[1][26]
whereEis the mean wave energy density per unit horizontal area (J/m2), the sum ofkineticandpotential energydensity per unit horizontal area. The potential energy density is equal to the kinetic energy,[1]both contributing half to the wave energy densityE,as can be expected from theequipartition theorem.
The waves propagate on the surface, where crests travel with the phase velocity while the energy is transported horizontally with thegroup velocity.The mean transport rate of the wave energy through a verticalplaneof unit width, parallel to a wave crest, is the energyflux(or wave power, not to be confused with the output produced by a device), and is equal to:[33][1]
- withcgthe group velocity (m/s).
Due to thedispersion relationfor waves under gravity, the group velocity depends on the wavelengthλ,or equivalently, on the waveperiodT.
Wave heightis determined by wind speed, the length of time the wind has been blowing, fetch (the distance over which the wind excites the waves) and by thebathymetry(which can focus or disperse the energy of the waves). A given wind speed has a matching practical limit over which time or distance do not increase wave size. At this limit the waves are said to be "fully developed". In general, larger waves are more powerful but wave power is also determined bywavelength,waterdensity,water depth and acceleration of gravity.
Wave energy converters
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/5/59/WECs-2020.png/440px-WECs-2020.png)
Wave energy converters (WECs) are generally categorized by the method, by location and by thepower take-offsystem. Locations are shoreline, nearshore and offshore. Types of power take-off include:hydraulic ram,elastomeric hose pump,pump-to-shore,hydroelectric turbine,air turbine,[34]andlinear electrical generator.
![](https://upload.wikimedia.org/wikipedia/commons/thumb/4/47/Wave_energy_power_take-off_alternatives.png/300px-Wave_energy_power_take-off_alternatives.png)
The four most common approaches are:
- point absorber buoys
- surface attenuators
- oscillating water columns
- overtopping devices
Point absorber buoy
[edit]This device floats on the surface, held in place by cables connected to the seabed. The point-absorber has a device width much smaller than the incoming wavelength λ. Energy is absorbed by radiating a wave with destructive interference to the incoming waves. Buoys use the swells' rise and fall to generate electricity directly vialinear generators,[35]generators driven by mechanical linear-to-rotary converters,[36]or hydraulic pumps.[37]Energy extracted from waves may affect the shoreline, implying that sites should remain well offshore.[38]
One point absorber design tested at commercial scale byCorPowerfeatures a negative spring that improves performance and protects the buoy in very large waves. It also has an internal pneumatic cylinder that keeps the buoy at a fixed distance from the seabed regardless of the state of the tide. Under normal operating conditions, the buoy bobs up and down at double the wave amplitude by adjusting the phase of its movements. It rises with a slight delay from the wave, which allows it to extract more energy. The firm claimed a 300% increase (600 kW) in power generation compared to a buoy without phase adjustments in tests completed in 2024.[39]
Surface attenuator
[edit]These devices use multiple floating segments connected to one another. They are oriented perpendicular to incoming waves. A fle xing motion is created by swells, and that motion drives hydraulic pumps to generate electricity. ThePelamis Wave Energy Converteris one of the more well-known attenuator concepts, although this is no longer being developed.[40]
Oscillating wave surge converter
[edit]These devices typically have one end fixed to a structure or the seabed while the other end is free to move.Energyis collected from the relative motion of the body compared to the fixed point. Converters often come in the form of floats, flaps, or membranes. Some designs incorporateparabolic reflectorsto focus energy at the point of capture. These systems capture energy from the rise and fall of waves.[41]
Oscillating water column
[edit]Oscillating water columndevices can be located onshore or offshore. Swells compress air in an internal chamber, forcing air through a turbine to createelectricity.[42]Significant noise is produced as air flows through the turbines, potentially affecting nearbybirdsandmarine organisms.Marine life could possibly become trapped or entangled within the air chamber.[38]It draws energy from the entire water column.[43]
Overtopping device
[edit]Overtopping devices are long structures that use wave velocity to fill a reservoir to a greater water level than the surrounding ocean. The potential energy in the reservoir height is captured with low-head turbines. Devices can be on- or offshore.
Submerged pressure differential
[edit]Submerged pressure differential based converters[44]use flexible (typically reinforced rubber) membranes to extract wave energy. These converters use the difference in pressure at different locations below a wave to produce a pressure difference within a closed power take-off hydraulic system. This pressure difference is usually used to produce flow, which drives a turbine and electrical generator. Submerged pressure differential converters typically use flexible membranes as the working surface between the water and the power take-off. Membranes are pliant and low mass, which can strengthen coupling with the wave's energy. Their pliancy allows large changes in the geometry of the working surface, which can be used to tune the converter for specific wave conditions and to protect it from excessive loads in extreme conditions.
A submerged converter may be positioned either on the seafloor or in midwater. In both cases, the converter is protected from water impact loads which can occur at thefree surface.Wave loads also diminish innon-linearproportion to the distance below the free surface. This means that by optimizing depth, protection from extreme loads and access to wave energy can be balanced.
Floating in-air converters
[edit]![Simplified design of Wave Power Station](https://upload.wikimedia.org/wikipedia/commons/thumb/9/98/Wave_power_station.gif/220px-Wave_power_station.gif)
Floating in-air converters potentially offer increased reliability because the device is located above the water, which also eases inspection and maintenance. Examples of different concepts of floating in-air converters include:
- roll damping energy extraction systems with turbines in compartments containing sloshing water
- horizontal axis pendulum systems
- vertical axis pendulum systems
Submerged wave energy converters
[edit]In early 2024, a fully submerged wave energy converter using point absorber-type wave energy technology was approved in Spain.[45]The converter includes a buoy that is moored to the bottom and situated below the surface, out of sight of people and away from storm waves.[45]
Environmental effects
[edit]Common environmental concerns associated withmarine energyinclude:[46][38]
- The effects ofelectromagnetic fieldsand underwater noise;
- Physical presence's potential to alter the behavior of marine mammals, fish, andseabirdswith attraction, avoidance, entanglement
- Potential effect on marine processes such assediment transportandwater quality.
- Foundation/mooring systems can affectbenthic organismsvia entanglement/entrapment
- Electromotive forceeffects produced fromsubsea power cables.
- Minor collision risk
- Artificial reef accumulation near fixed installations
- Potential disuption to roosting sites
Potential
[edit]Wave energy's worldwide theoretical potential has been estimated to be greater than 2 TW.[47]Locations with the most potential for wave power include the western seaboard of Europe, the northern coast of the UK, and the Pacific coastlines of North and South America, Southern Africa, Australia, and New Zealand. The north and southtemperate zoneshave the best sites for capturing wave power. The prevailingwesterliesin these zones blow strongest in winter.
![](https://upload.wikimedia.org/wikipedia/commons/thumb/2/21/World_wave_energy_resource_map.png/220px-World_wave_energy_resource_map.png)
TheNational Renewable Energy Laboratory(NREL) estimated the theoretical wave energy potential for various countries. It estimated that the US' potential was equivalent to 1170 TWh per year or almost 1/3 of the country's electricity consumption.[48]The Alaska coastline accounted for ~50% of the total.
The technical and economical potential will be lower than the given values for the theoretical potential.[49][50]
Challenges
[edit]![]() | This sectionneeds expansionwith: what are the main technical difficulties?. You can help byadding to it.(February 2023) |
Environmental impacts must be addressed.[30][51]Socio-economic challenges include the displacement of commercial and recreational fishermen, and may present navigation hazards.[52]Supporting infrastructure, such as grid connections, must be provided.[53]Commercial WECs have not always been successful. In 2019, for example, Seabased Industries AB in Sweden was liquidated due to "extensive challenges in recent years, both practical and financial".[54]
Current wave power generation technology is subject to many technical limitations.[55]These limitations stem from the complex and dynamic nature of ocean waves, which require robust and efficient technology to capture the energy. Challenges include designing and building wave energy devices that can withstand the corrosive effects of saltwater, harsh weather conditions, and extreme wave forces.[56]Additionally, optimizing the performance and efficiency of wave energy converters, such as oscillating water column (OWC) devices, point absorbers, and overtopping devices, requires overcoming engineering complexities related to the dynamic and variable nature of waves.[57]Furthermore, developing effective mooring and anchoring systems to keep wave energy devices in place in the harsh ocean environment, and developing reliable and efficient power take-off mechanisms to convert the captured wave energy into electricity, are also technical challenges in wave power generation.[58]As the wave energy dissipation by a submerged flexible mound breakwater is greater than that of a rigid submerged structure, greater wave energy dissipation is expected due to highly deformed shape of the structure.[59]
Wave farms
[edit]A wave farm (wave power farm or wave energy park) is a group of colocated wave energy devices. The devices interact hydrodynamically and electrically, according to the number of machines, spacing and layout, wave climate, coastal and benthic geometry, and control strategies. The design process is a multi-optimization problemseeking high power production, low costs and limited power fluctuations.[60]Nearshore wave farms have substantial impact on beach dynamics. For instance, wave farms significantly reduce erosion which demonstrates that this synergy between coastal protection and energy production enhances the economic viability of wave energy.[61]Additional research finds that wave farms located near lagoons can potentially provide effective coastal protection during maritime spatial planning.[62]
Gallery of wave energy installations
[edit]-
Pelamis Wave Energy Converteron site at theEuropean Marine Energy Centre(EMEC), in 2008.
-
The AMOG Wave Energy Converter (WEC), in operation off SW England (2019).
-
The mWave converter by Bombora Wave Power.
-
CalWave Power Technologies, Inc. wave energy converter in California.
Patents
[edit]- WIPO patent application WO2016032360— 2016Pumped-storage system– "Pressure buffering hydro power" patent application
- U.S. patent 8,806,865— 2011Ocean wave energy harnessing device– Pelamis/Salter's Duck Hybrid patent
- U.S. patent 3,928,967— 1974Apparatus and method of extracting wave energy– The original "Salter's Duck" patent
- U.S. patent 4,134,023— 1977Apparatus for use in the extraction of energy from waves on water– Salter's method for improving "duck" efficiency
- U.S. patent 6,194,815— 1999Piezoelectric rotary electrical energy generator
- U.S. patent 1,930,958— 1932Wave Motor- Parsons Ocean Power Plant - Herring Cove Nova Scotia - March 1925. The world's first commercial plant to convert ocean wave energy into electrical power. Designer - Osborne Havelock Parsons - born in 1873 Petitcodiac, New Brunswick.
- Wave energy converters utilizing pressure differences US 20040217597 A1— 2004Wave energy converters utilizing pressure differences[63]
A UK-based company has developed a Waveline Magnet that can achieve alevelized cost of electricityof £0.01/kWh with minimal levels of maintenance.[64]
See also
[edit]- List of wave power projects
- List of wave power stations
- Wave power in Australia
- Wave power in New Zealand
- Wave power in Scotland
- Wave power in the United States
- Wave power ship
- Marine energy
- Ocean thermal energy conversion
- Office of Energy Efficiency and Renewable Energy(OEERE)
- World energy consumption
Notes
[edit]- ^For determining the group velocity the angular frequencyωis considered as a function of the wavenumberk,or equivalently, the periodTas a function of the wavelengthλ.
- ^The energy flux iswiththe group velocity, seeHerbich, John B. (2000).Handbook of coastal engineering.McGraw-Hill Professional. A.117, Eq. (12).ISBN978-0-07-134402-9.The group velocity is,see the collapsed table "Properties of gravity waves on the surface of deep water, shallow water and at intermediate depth, according to linear wave theory"in the section"Wave energy and wave energy flux"below.
- ^Here, the factor for random waves is1⁄16,as opposed to1⁄8for periodic waves – as explained hereafter. For a small-amplitude sinusoidal wavewith wave amplitudethe wave energy density per unit horizontal area isorusing the wave heightfor sinusoidal waves. In terms of the variance of the surface elevationthe energy density is.Turning to random waves, the last formulation of the wave energy equation in terms ofis also valid (Holthuijsen, 2007, p. 40), due toParseval's theorem.Further, thesignificant wave heightisdefinedas,leading to the factor1⁄16in the wave energy density per unit horizontal area.
References
[edit]- ^abcdefPhillips, O.M.(1977).The dynamics of the upper ocean(2nd ed.). Cambridge University Press.ISBN978-0-521-29801-8.
- ^Christine Miller (August 2004)."Wave and Tidal Energy Experiments in San Francisco and Santa Cruz".Archivedfrom the original on October 2, 2008.RetrievedAugust 16,2008.
- ^abc"Wave energy and its utilization".Slideshare.June 1, 1999.RetrievedApril 28,2023.
- ^"World's first commercial wave power station activated in Scotland".Archivedfrom the original on August 5, 2018.RetrievedJune 5,2018.
- ^Joao Lima.Babcock, EDP and Efacec to Collaborate on Wave Energy projectsArchivedSeptember 24, 2015, at theWayback MachineBloomberg,September 23, 2008.
- ^Falcão, António F. de O. (April 1, 2010)."Wave energy utilization: A review of the technologies".Renewable and Sustainable Energy Reviews.14(3): 899–918.doi:10.1016/j.rser.2009.11.003.ISSN1364-0321.
- ^Madan, D.; Rathnakumar, P.; Marichamy, S.; Ganesan, P.; Vinothbabu, K.; Stalin, B. (October 21, 2020), "A Technological Assessment of the Ocean Wave Energy Converters",Advances in Industrial Automation and Smart Manufacturing,Lecture Notes in Mechanical Engineering, Singapore: Springer Singapore, pp. 1057–1072,doi:10.1007/978-981-15-4739-3_91,ISBN978-981-15-4738-6,S2CID226322561,retrievedJune 2,2022
- ^abClément; et al. (2002). "Wave energy in Europe: current status and perspectives".Renewable and Sustainable Energy Reviews.6(5): 405–431.doi:10.1016/S1364-0321(02)00009-6.
- ^"The Development of Wave Power"(PDF).Archived fromthe original(PDF)on July 27, 2011.RetrievedDecember 18,2009.
- ^Morris-Thomas; Irvin, Rohan J.; Thiagarajan, Krish P.; et al. (2007). "An Investigation Into the Hydrodynamic Efficiency of an Oscillating Water Column".Journal of Offshore Mechanics and Arctic Engineering.129(4): 273–278.doi:10.1115/1.2426992.
- ^"Wave Energy Research and Development at JAMSTEC".Archived fromthe originalon July 1, 2008.RetrievedDecember 18,2009.
- ^Farley, F. J. M. & Rainey, R. C. T. (2006)."Radical design options for wave-profiling wave energy converters"(PDF).International Workshop on Water Waves and Floating Bodies.Loughborough.Archived(PDF)from the original on July 26, 2011.RetrievedDecember 18,2009.
- ^"Edinburgh Wave Energy Project"(PDF).University of Edinburgh.Archived fromthe original(PDF)on October 1, 2006.RetrievedOctober 22,2008.
- ^Falnes, J. (2007). "A review of wave-energy extraction".Marine Structures.20(4): 185–201.doi:10.1016/j.marstruc.2007.09.001.
- ^"Our history".RetrievedApril 28,2023.
- ^Aderinto, Tunde and Li, Hua (2019)."Review on power performance and efficiency of wave energy converters".Energies.12(22): 4329.doi:10.3390/en12224329.
{{cite journal}}
:CS1 maint: multiple names: authors list (link) - ^"Ocean Energy Teams Compete for $16 Million Scotland Prize".National geographic.September 7, 2012. Archived fromthe originalon September 11, 2022.
- ^Scott Macnab (November 2, 2017)."Government's £200m wave energy plan undermined by failures".The Scotsman.Archivedfrom the original on December 5, 2017.RetrievedDecember 5,2017.
- ^Wave Energy Bill Approved by U.S. House Science CommitteeArchivedMay 25, 2018, at theWayback MachineJune 18, 2007
- ^DOE announces first marine renewable energy grantsArchived2004-07-27 at theWayback MachineSeptember 30, 2008
- ^"Ocean energy".RetrievedApril 28,2023.
- ^"Projects to unlock the potential of marine wave energy".March 24, 2021.RetrievedApril 28,2023.
- ^"Wave energy Scotland".RetrievedApril 28,2023.
- ^Numerical modelling of wave energy converters: state-of-the-art techniques for single devices and arrays.Matt Folley. London, UK. 2016.ISBN978-0-12-803211-4.OCLC952708484.
{{cite book}}
:CS1 maint: location missing publisher (link) CS1 maint: others (link) - ^R. G. Dean & R. A. Dalrymple (1991).Water wave mechanics for engineers and scientists.Advanced Series on Ocean Engineering. Vol. 2. World Scientific, Singapore.ISBN978-981-02-0420-4.See page 64–65.
- ^abGoda, Y. (2000).Random Seas and Design of Maritime Structures.World Scientific.ISBN978-981-02-3256-6.
- ^Figure 6 from:Wiegel, R.L.; Johnson, J.W. (1950), "Elements of wave theory",Proceedings 1st International Conference on Coastal Engineering,Long Beach, California:ASCE,pp. 5–21,doi:10.9753/icce.v1.2
- ^Tucker, M.J.; Pitt, E.G. (2001). "2". In Bhattacharyya, R.; McCormick, M.E. (eds.).Waves in ocean engineering(1st ed.). Oxford: Elsevier. pp. 35–36.ISBN978-0080435664.
- ^"Wave Power".University of Strathclyde.Archivedfrom the original on December 26, 2008.RetrievedNovember 2,2008.
- ^ab"Wave Energy Potential on the U.S. Outer Continental Shelf"(PDF).United States Department of the Interior.Archived fromthe original(PDF)on July 11, 2009.RetrievedOctober 17,2008.
- ^Academic Study: Matching Renewable Electricity Generation with Demand: Full ReportArchivedNovember 14, 2011, at theWayback Machine.Scotland.gov.uk.
- ^Holthuijsen, Leo H. (2007).Waves in oceanic and coastal waters.Cambridge: Cambridge University Press.ISBN978-0-521-86028-4.
- ^Reynolds, O.(1877)."On the rate of progression of groups of waves and the rate at which energy is transmitted by waves".Nature.16(408): 343–44.Bibcode:1877Natur..16R.341..doi:10.1038/016341c0.
Lord Rayleigh (J. W. Strutt)(1877)."On progressive waves".Proceedings of the London Mathematical Society.9(1): 21–26.doi:10.1112/plms/s1-9.1.21.Reprinted as Appendix in:Theory of Sound1,MacMillan, 2nd revised edition, 1894. - ^Embedded Shoreline Devices and Uses as Power Generation SourcesKimball, Kelly, November 2003
- ^"Seabased AB wave energy technology".Archivedfrom the original on October 10, 2017.RetrievedOctober 10,2017.
- ^"PowerBuoy Technology — Ocean Power Technologies".Archivedfrom the original on October 10, 2017.RetrievedOctober 10,2017.
- ^"Perth Wave Energy Project – Carnegie's CETO Wave Energy technology".Archivedfrom the original on October 11, 2017.RetrievedOctober 10,2017.
- ^abc"Tethys".Archivedfrom the original on May 20, 2014.RetrievedApril 21,2014.
- ^Blain, Loz (March 7, 2024)."Video: Wave-amplifying generator bounces twice as high as the swells".New Atlas.RetrievedApril 12,2024.
- ^"Wave power firm Pelamis calls in administrators".BBC News.November 21, 2014.RetrievedApril 13,2024.
- ^McCormick, Michael E.; Ertekin, R. Cengiz (2009)."Renewable sea power: Waves, tides, and thermals – new research funding seeks to put them to work for us".Mechanical Engineering.131(5). ASME: 36–39.doi:10.1115/1.2009-MAY-4.
- ^"Extracting Energy From Ocean Waves".Archived fromthe originalon August 15, 2015.RetrievedApril 23,2015.
- ^Blain, Loz (August 1, 2022)."Blowhole wave energy generator exceeds expectations in 12-month test".New Atlas.RetrievedAugust 8,2022.
- ^Kurniawan, Adi;Greaves, Deborah;Chaplin, John (December 8, 2014)."Wave energy devices with compressible volumes".Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences.470(2172): 20140559.Bibcode:2014RSPSA.47040559K.doi:10.1098/rspa.2014.0559.ISSN1364-5021.PMC4241014.PMID25484609.
- ^abPaleja, Ameya (April 18, 2024)."Spain set to get table-top-like submerged sea wave energy converter".Interesting Engineering.Archivedfrom the original on April 22, 2024.
- ^"Tethys".Archived fromthe originalon November 10, 2014.
- ^Gunn, Kester; Stock-Williams, Clym (August 2012). "Quantifying the global wave power resource".Renewable Energy.44.Elsevier:296–304.doi:10.1016/j.renene.2012.01.101.
- ^"Ocean Wave Energy | BOEM".boem.gov.Archivedfrom the original on March 26, 2019.RetrievedMarch 10,2019.
- ^"Renewable Energy Economic Potential".nrel.gov.RetrievedMay 2,2023.
- ^Teske, S.; Nagrath, K.; Morris, T.; Dooley, K. (2019)."Renewable Energy Resource Assessment".In Teske, S. (ed.).Achieving the Paris Climate Agreement Goals.Springer. pp. 161–173.doi:10.1007/978-3-030-05843-2_7.ISBN978-3-030-05842-5.S2CID134370729.
- ^Marine Renewable Energy ProgrammeArchivedAugust 3, 2011, at theWayback Machine,NERCRetrieved August 1, 2011
- ^Steven Hackett:Economic and Social Considerations for Wave Energy Development in CaliforniaCEC Report Nov 2008ArchivedMay 26, 2009, at theWayback MachineCh2, pp22-44California Energy Commission|Retrieved December 14, 2008
- ^Gallucci, M. (December 2019)."At last, wave energy tech plugs into the grid - [News]".IEEE Spectrum.56(12): 8–9.doi:10.1109/MSPEC.2019.8913821.ISSN1939-9340.
- ^"Seabased Closes Production Facility in Sweden".marineenergy.biz. January 2019.RetrievedDecember 12,2019.
- ^Singh, Rajesh; Kumar, Suresh; Gehlot, Anita; Pachauri, Rupendra (February 2018)."An imperative role of sun trackers in photovoltaic technology: A review".Renewable and Sustainable Energy Reviews.82:3263–3278.doi:10.1016/j.rser.2017.10.018.
- ^Felix, Angélica; V. Hernández-Fontes, Jassiel; Lithgow, Débora; Mendoza, Edgar; Posada, Gregorio; Ring, Michael; Silva, Rodolfo (July 2019)."Wave Energy in Tropical Regions: Deployment Challenges, Environmental and Social Perspectives".Journal of Marine Science and Engineering.7(7): 219.doi:10.3390/jmse7070219.ISSN2077-1312.
- ^Xamán, J.; Rodriguez-Ake, A.; Zavala-Guillén, I.; Hernández-Pérez, I.; Arce, J.; Sauceda, D. (April 2020)."Thermal performance analysis of a roof with a PCM-layer under Mexican weather conditions".Renewable Energy.149:773–785.doi:10.1016/j.renene.2019.12.084.S2CID213903662.
- ^Røe, Oluf Dimitri; Stella, Giulia Maria (2017), Testa, Joseph R. (ed.),"Malignant Pleural Mesothelioma: History, Controversy, and Future of a Man-Made Epidemic",Asbestos and Mesothelioma,Current Cancer Research, Cham: Springer International Publishing, pp. 73–101,doi:10.1007/978-3-319-53560-9_4,hdl:11250/2628134,ISBN978-3-319-53558-6,retrievedApril 18,2023
- ^Jafarzadeh, E., Kabiri-Samani, A., Mansourzadeh, S., & Bohluly, A. (2021). Experimental modeling of the interaction between waves and submerged flexible mound breakwaters. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 235(1), 127-141.
- ^Giassi, Marianna; Göteman, Malin (April 2018)."Layout design of wave energy parks by a genetic algorithm".Ocean Engineering.154:252–261.doi:10.1016/j.oceaneng.2018.01.096.ISSN0029-8018.S2CID96429721.
- ^Abanades, J.; Greaves, D.; Iglesias, G. (September 1, 2014)."Coastal defence through wave farms".Coastal Engineering.91:299–307.Bibcode:2014CoasE..91..299A.doi:10.1016/j.coastaleng.2014.06.009.hdl:10026.1/4556.ISSN0378-3839.S2CID35664931.
- ^Onea, Florin; Rusu, Liliana; Carp, Gabriel Bogdan; Rusu, Eugen (March 2021)."Wave Farms Impact on the Coastal Processes—A Case Study Area in the Portuguese Nearshore".Journal of Marine Science and Engineering.9(3): 262.doi:10.3390/jmse9030262.ISSN2077-1312.
- ^FreePatentsOnlineWave energy converters utilizing pressure differencesArchivedOctober 31, 2014, at theWayback Machine,April 11, 2004
- ^"Wave magnets offer 'cheapest clean energy ever'".The Independent.August 31, 2022.
Further reading
[edit]- Cruz, Joao (2008).Ocean Wave Energy – Current Status and Future Prospects.Springer.ISBN978-3-540-74894-6.,431 pp.
- Falnes, Johannes (2002).Ocean Waves and Oscillating Systems.Cambridge University Press.ISBN978-0-521-01749-7.,288 pp.
- McCormick, Michael (2007).Ocean Wave Energy Conversion.Dover.ISBN978-0-486-46245-5.,256 pp.
- Twidell, John; Weir, Anthony D.; Weir, Tony (2006).Renewable Energy Resources.Taylor & Francis.ISBN978-0-419-25330-3.,601 pp.
External links
[edit]![](https://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Kate Galbraith (September 22, 2008)."Power From the Restless Sea Stirs the Imagination".The New York Times.RetrievedOctober 9,2008.
- "Wave Power: The Coming Wave"from the Economist, June 5, 2008
- Tethys– theTethys databasefrom thePacific Northwest National Laboratory
- Wave Swell Energy videoonYouTube