Soundwave (G1)/merchandise
From Transformers Wiki
- Main
- Marvel comic
- G1 cartoon
- IDW (2005)
- Toys
- Merchandise
- Gallery
Soundwave.Quantity of merchandise: sufficient.
Transformers Design Center
- Design Center(1984)
- Manufactured byArrow,the Soundwave Design Center was a box in the general shape and likeness of Soundwave which contained various arts and crafts projects for young tykes to entertain themselves with. His head pulled out to reveal a ruler, the right arm contained a pencil sharpener, the left contained a hilariously dinky and useless pair of "scissors", his lower legs contained rubbing-transfer panels, and the entire back worked as a sort of pantograph machine - attaching a nib to one end of the large mechanical armature ostensibly allowed you to 'remote draw' designs on the included plates.
Transformers Cassette Player
- Cassette Player(1985)
- A non-Transforming cassette player in the shape of Soundwave in his robot mode (oh the irony!), made by Hasbro in 1985. It runs on 3 C batteries (not included, of course).
Transformers Milk Caramel
- Soundwave(1985)
- One ofKabaya's first Transformerscandy toylines, theTransformers Milk Caramelseries featured small rubber figures, similar to the later-releasedDecoys,but smaller, flatter and based more on the toys, rather than their animation models. Soundwave was available in numerous different colors.
Transformers Gum
- Soundwave(1985)
- Accessories:Rocket launcher, rocket
- A model kit of Soundwave was available as part of Kabaya'sTransformers Gumrange of figures. Released in the first wave of the series and standing at about four inches tall, he was moulded from red, black and grey plastic and featured stickers for detail. Although armed with only one of his guns and lacking the ability to store it in his battery compartment like the original toy could, he retains his opening chest door. AlthoughTransformers Gumversions of some of Soundwave's cassettes would later be released, they proved too large to fit inGumSoundwave's chest; he could, however, accommodate the smaller cassettes released as part of Kabaya'sothercandy toy model kit series,Transformers Choco.
- This Soundwave figure was later re-released in 1997 by a Korean company namedToon Town,in a two-pack with the "Transformers Gum" version ofOptimus Prime.
Decoy
- Destron Hero Collection 22(multi-pack, 1985)
- This small purple rubber figurine of Soundwave was released in Japan as part of a large multi-pack of similar figures, which were used as playing pieces forTransformersboard games. The figure features a number etched into its back which is the sum total of Soundwave'sTech Specratings, which served some function in the gameplay the figures were used for. A peach-colored version of Soundwave could be found packed in various other multi-packs the following year, and in numerous other colours as part of the blindpackedTransformers Ramuneline.
- Soundwave(1987)
- Decoy number:36
- The Soundwave figurine was later brought over toHasbromarkets as part of theDecoypromotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (36, in Soundwave's case). Like all Decepticon Decoys, he was a randomly-chosen pack-in available with the cardedThrottlebots,Stunticons,Combaticons,andTerrorcons,and was, very early on in the promotion, available in an alternate red coloration that was only packed in with the Throttlebots. Unsurprisingly, this red figurine is much rarer.
Super Collection Figure
- Soundwave(2001)
- Act:3
- Accessories:Stand
- A three-inch tallPVCfigurine of Soundwave was available in the third wave ofTakara'sSuper Collection Figureline. Like all the figures in the wave, it was available as both a standard full color figure and a colorless clear plastic version, one of each of which was available in a standard case of twelveblindpackedfigures.
- In two out of every ten cases, the color version of Soundwave came with the right arm of the wave's collectibleFortress Maximus"build-a-figure". This part could be either full-color or clear plastic, at a ratio of 1:1.
- Soundblaster(2002)
- Act:6
- Accessories:Stand
- Soundwave's PVC was recolored into his blackHeadmastersincarnation, Soundblaster, for the sixthSCFAct. This time, the figure was available in a variant metallic silver "pewter" color scheme, at the same ratio of one each per standard case. The full-color version is actually cast in transparent red plastic and painted over entirely save his chest-window.
- In eight out of every ten cases, pewter Soundblaster came packaged with the right leg of this wave'sGrand Maximusbuild-a-figure. This part could be in either full color or pewter, in theveryunequal ratio of six color parts to every two pewter.
- This Act was seemingly in shorter supply than the others before and since, and is not terribly common on the secondary market.
- The pewter version of the figure has a potential problem with connector peg breakage at the joints, due to said pegs often getting a layer of pewter paint before being forced into a socket, leading to sticking and tearing. Care should be used when moving or removing the arms; shaving down the socket interior with a thin hobby knife is usually sufficient to fix the issue.
Heroes of Cybertron
- Soundwave(2003)
- The original SoundwaveSCFfigure was later released by Hasbro as part of the third wave of theHeroes of Cybertronseries. Like all figures in the line, this release of Soundwave differed from hisSCFcounterpart by being cast entirely in translucent red plastic and then painted over, save for his eyes, allowing for alight-pipingeffect. There are a few other minor differences, namely the vents on the sides of his helmet being white instead of black, he uses a paler shade of yellow, and his, um, groin-buttons being a solid block of white rather than individually painted.
- Rather than being blindpacked, Soundwave was sold on an individual blister pack with a profile card included.
- Soundwave was re-released in 2006 as part of a short-livedHeroes of Cybertronrevival, celebrating the 2006 DVD release of the originalThe Transformers: The Movie.Soundwave wasmostlythe same as the previous HOC release, except for being cast in solid rather than translucent plastic. His paint applications are more in-line with the original SCF, with black vents and separately-painted groin-buttons.
Hard Hero
- Soundwave(2002)
- The fourth inHard Hero's series ofTransformersbusts, Soundwave is 6 inches tall and made out of cold-cast porcelain. 100 copies of the bust were signed by sculptorJason Ray.
MyClone
- Soundwave(2003)
- Japanese ID number:MTF012
- Accessories:Blue display stand
- Known designers:Kazutami Yasuhiko(TakaraTomy)
- Released in the second wave of theMyCloneline of Transformers PVC figures, thissuper deformedSoundwave comes with a hexagonal blue display stand, which can link up with the identical stands included with other MyClone figures. His modular design allows his parts to be mixed and matched with those of any other MyClone figure.
Q-Robo Collection
- Soundwave(2003)
- Accessories:Laserbeak
- A super-deformed PVC of Soundwave was released as part of theQ-Robo Collection,and included a removable Laserbeak figure that could fit into his chest, as if in mid-ejection. Like all the figures in the series, it was sold blindpacked in a plastic capsule, featured articulation in the neck and shoulders, and was also available in a translucent purple color scheme.
Generation 1 Figure-Collection
- Soundwave(2003)
- Japanese ID number:C-3
- Accessories:Display base
- At only one inch in height, this Soundwave "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's TransformersGeneration 1 Figure-Collection.The figure was rendered in a "retro" black and white color scheme, and came with a leaflet, personalized with cartoon screen captures.
History Collection
- Soundwave(2004)
- Accessories:Display base
- Takara produced this PVC figurine of Soundwave as part of theirHistory Collectionset. Despite its diminutive size, this two-piece full-color figure features articulated shoulders.
Palisades
- Soundwave(statue, 2004)
- This statue of Soundwave byPalisades Toysstands at 6 "tall, and was limited to 2000 pieces worldwide. Palisades later released mini-statues of Laserbeak and Ravage which were scaled to fit with Soundwave; the Laserbeak statue was capable of perching on Soundwave's outstretched arm.
Titanium Series
- Soundwave(3 "Robot Masters, unreleased)
- Accessories:Decepticon stand
- Soundwave was also planned to be released as a 3 "Robot Masters non-transformable figurine, though it never saw release.
 Proceed on your way to oblivion. |
- Soundblaster(3 "Robot Masters, unreleased)
- Accessories:Decepticon stand
- A 3 "Soundblaster was also advertised on catalogues included with some of the lastTitaniumtoys to be released, and was also canceled. In fact, this figure has never even beenseen... but we feel pretty confident saying it would have been a redeco of the unreleased Soundwave figure.
Proceed on your way to oblivion. |
Transformers - Wall Plaque
- Soundwave(Diamond Select, 2006)
- Released by Diamond Select Toys in 2006, Soundwave was sculpted byArt Asylumand limited to 1,000 pieces. He is seen emerging from the space bridge with Rumble, Laserbeak, and Ravage in tow. Despite the being solicited as a Wall Plaque this piece can not be placed on a wall in any way.
First 4 Figures
- Soundwave vs Jazz(
2006unreleased)
- Known designers:Little IroN(concept artist),"Mad" Alterton(sculptor)
- Intended for release in theTransformers Battlefieldline by model companyFirst 4 Figures,this was to be 13-inch-ish tall diorama depicting Soundwave fighting againstJazz.According to a look at the digital sculpt afforded to the toy news press at New YorkToy Fairin 2006, the set featured Soundwave holding Jazz above his head, about to throw him down onto the trashed form ofBlasterat his feet.[1]
- As aBattlefieldrelease, this model would have featured a detailed base designed to interlock with others in the same range to create a massive battle diorama. Unfortunately, a general discontinuation of First 4 Figures'Transformers-related output meant only the first model, "Optimus PrimevsMegatron",was released.
- All models in theBattlefieldline were advertised as being sculpted by"Mad" Alterton,with a corresponding set of art posters byLittle IroN,implying he had produced the concept art for each release. The set was likely intended to be limited to 1,850 pieces worldwide, given that the certificate of authenticity for the first set allowed buyers to reserve the same numbered release on their next purchase in the series.
Proceed on your way to oblivion. |
Transformers - Mini Bust
- Soundwave(Diamond Select, 2007)
- Released byDiamond Select Toysin 2007, Soundwave was sculpted byMark WongofArt Asylumand limited to 1,000 pieces. The sculpt features both his concussion blaster gun and shoulder cannon with Laserbeak perched on his left shoulder. His tape deck altmode is sculpted on the base of the bust.
- Sound Blaster(Diamond Select, 2008)
- Released by Diamond Select Toys in 2008, Sound Blaster was sculpted byMark WongofArt Asylum,limited to 1,000 pieces. He comes with Ratbat perched on his shoulder, and a scale version of Frenzy in tape mode that can be freely removed. This is Sound Blaster's first North American release. His name has been changed from "Soundblaster" to "Sound Blaster".
- HisTech Speccontains some interesting new information, notably that his body was reconstructed using technology stolen fromNebulosand his shoulder cannon is now an "electric launcher" capable of firing charged particles at 38,000 volts. His tech spec stats are STR 10 INT 7 SPD 8 END 10 RNK 9 CRG 10 FBL 10 SKL 8 and are completely different from the ones on his original Japanese release. His motto reads "Volume the same, destructive power doubled."
Robot Heroes
- Bumblebee & Soundwave(Two pack, 2007)
- Known designers:Bill Rawley(Hasbro),Marcelo Matere(concept artist)
- Robot HeroesSoundwave is a soft-plastic figurine sculpted in asuper deformedstyle, with joints at his head and shoulders (although his shoulder cannon prevents his big head from turning to the right). He came in a two-pack withBumblebee.
- Soundwave(Single-pack, 2008)
- In some countries outside of North America, Soundwave was released individually in a blindpack with no notable changes.
Sota Toys
- Transformers Chess Set(
2007)
- Two identical Soundwave pieces were to be the Decepticon-side Bishops on achess setbased on Generation 1, but the set apparently never saw release.LaserbeakandRavagewere included in Soundwave's sculpting.
Proceed on your way to oblivion. |
Boss Coffee
- Soundwave(2008)
- A non-transforming PVC figure of Soundwave was released as part of a promotion byBoss Coffee.The small figure was randomly included with single cans of the company's "Rainbow Mountain Blend" coffee, contained in a plastic capsule affixed to the top of can which then became a display base for the figurine once removed. Soundwave features articulation at the shoulders and waist, and came with a small catalog leaflet that could be folded up and attached to the lid/base to form a diorama background for added display value.
Attacktix
- Soundwave(Booster, unreleased)
- Part of a planned second series ofTransformersAttacktixboosters, Soundwave was to be a 30-point "Leader" class piece.
 Game over. |
"Yeah, righteous!"
- Laserbeak
- AttacktixLaserbeak is a 10-point Trooper-type piece featuring a firing missile launcher on his back. The piece's base is shaped like Soundwave's arm, where Laserbeak rests while not in use. He is attached to the arm with a string, allowing him to take flight and get better shots at enemy pieces.
- While Hasbro showed off Laserbeak at some conventions, he was ultimately never released. Most of his in-game stats and abilities are as such unknown.
Game over. |
Mighty Muggs
- Soundwave(2009)
- Accessories:Gun
- This super-deformed, non-transformable Soundwave figure uses the standardMighty Muggsbody template, with swivel joints in his neck and arms. His colors are based on those of his original toy, including yellow eyes and even having a painted "screw" behind his head, and he comes with a super-deformed version of his concussion blaster.
- Soundwave(2019)
- ID number:09
- Styled after hisevergreendesign, this new Soundwave came in the second wave of the line's 2018 relaunch. Pressing down on his helmet will skip to his next face. Three are on the playlist: classical, alt rock, and blues.
G.I. Joe and the Transformers
- Shockwave H.I.S.S. Tank with two figures & Energon(2012)
- Anexclusiverelease forSan Diego Comic-Con2012, this box set contains aredecoof the 2012 new-moldG.I. Joe: RetaliationHISS tankmeant to representShockwave,along with theCobrasDestroand a "Constructicon B.A.T."with a trolley for carryingEnergon cubes.
- Destro's accessories include Soundwave in the form of a non-transforming tape deck and three "Mini-ConDeployers"– micro-cassettes capable of being placed within the Soundwave toy. The toy's press release identifies the tapes asLaserbeak,Ravage,andRatbat,but since all three sport the sculpted details of the original Laserbeak toy and are colored solid red, gold, and orange, just who is meant to be who is unclear.
- Scarlet vs Zartan & Autobot Powerglide vs Soundwave(2016)
- Accessories:two rocket launchers with rockets, two missile launchers, four missiles, two nose guns
- Exclusive to theHasbro Toy Shopbooth atSan Diego Comic-Con2016 and the Hasbro Toy Shop website, Soundwave is a recolor of a 2005 version of theCobraHISS tankvehicle done up in traditional a Soundwave motif. It features four firing missiles, rotating turret, an opening cockpit, and opening sides to fit figures inside. Exclusive to this release of the vehicle are non-firing rocket launchers that resemble G1 Soundwave's iconic battery-weapons.
- The set also includes a redeco of an equally non-transforming CobraRattlercolored asPowerglideand figures ofG.I. JoecharactersScarlettandZartan.
Titan Warriors
- Titan Warrior 5-Pack(2013)
- Available at San Diego Comic-Con 2013, this Soundwave is a 6 "PVCTitan Warriorsfigure (similar to Bandai'sUltra/Sentai/Rider Hero, Movie Monster Series) with articulated arms. He was packed withOptimus Prime,Grimlock,MegatronandStarscream.
- Soundwave(Titan Warrior, 2014)
- TheTitan WarriorsSoundwave toy was released individually, under theBeast HuntersTitan Heroessubline.
- Soundwave(Titan Warrior, 2018)
- Titan WarriorsSoundwave was later released as a Walmart exclusive.
The Loyal Subjects
- Soundwave(2013)
- Cybertron Edition 2-Pack(2014)
Thrilling 30
- Soundwave(Collectible Figurine, 2014)
- Series / Number:1 / #5
- Accessories:Collector's base
- A super-deformed Soundwave was released among the blindpackedThrilling 30Collectible FigurinesbyGoldie Marketing.He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.
- Collectible Figurines(5-pack, 2014)
- Series:1
- Accessories:5 collector's bases
- The same Soundwave figurine was also available in a 5-pack alongsideOptimus Prime,Megatron,RatchetandStarscream.
Tiny Titans
- Soundwave(Tiny Titans, 2015)
- Series:2
- Number:6/12
- Part of the second assortment ofTiny Titansblindpacks,this version of Soundwave is a very small, soft-plastic figure of him in robot mode.
- He includes a collectible card that renders him in the2015Robots in Disguisestyling. The card includes a scan-badge for theRobots in Disguisemobile game,which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.
- This wave saw fairly minimal release at "big box" retailers, but unlike other waves, wasnotpicked up by drug stores and the like later, making them particularly hard to find.
Metal Earth
- Soundwave(2015)
- ID number:MMS302
- Metal EarthSoundwave is a DIY 3D Metal Model kit. He features what is most likely aLaserbeakmodel perched on his left forearm. The kit's difficulty rating is given as "expert".
- Soundwave(Legends, 2019)
- ID number:MEM058
- Metal Earth LegendsSoundwave is a DIY 3D steel model kit in the shape of a super deformed version of theevergreenSoundwave design. The kit's difficulty rating is given as "moderate".
Bitfig
- Soundwave(06-2017)
- Released as part of the second wave of Bitfig capsule toys byTakaraTomy A.R.T.S.,Soundwave is a non-transforming super deformed figurine inspired by his appearance in the G1 cartoon and is articulated at the neck and shoulders. Bitfig toys were packaged in capsules color coded to the toy they contained.
Hallmark Keepsake
- Transformers Soundwave(2017)
- Hallmark's Soundwave is a Christmas tree ornament resembling a miniaturized version of the original Soundwave toy in robot mode, complete with casette-mode Laserbeak in his chest. The ornament does not transform.
My Busy Books
- Transformers: My Busy Book(2017)
- Soundwave is represented by a pair of small, non-transforming PVC figurines, one anevergreen-styled robot and the other an SUV with non-functional wheels. He (They?) came as part of a set of 12 figurines included with a10-page board bookand a playmat featuring a destroyed city and Cybertron.
- For whatever reason, Soundwave's alt mode figurine is not included with the Brazilian edition of the book.
Kidrobot
Enamel Pin Series
- Soundwave(November 3,2017)
- Rarity:1 in 20
- Released byKidrobotin their Enamel Pin Series, this is a flat, enamel pin badge of Soundwave inspired by the art ofTom Scioli'sTransformers vs. G.I. Joe,albeit withcutesy proportions.The pin series wasblindboxed,with some pins being rarer than others.
Vinyl Mini Series
- Soundwave(November 14,2017)
- Rarity:1 in 24
- The same character design was reused for the Vinyl Mini Series, with Soundwave receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. Soundwave featured articulation in each shoulder, and also deviated from the standard body design for this series by including his cannon on his right shoulder.
Prime 1 Studio
- Soundwave & Laserbeak(
201?)
- Prime 1 StudioPremium MasterlineSoundwave was going to be a huge robot mode statue with a very stylized design and would probably feature LED lights on its eyes. A non-transformingLaserbeakin bird mode was going to be included as well, but the pair never saw release. The Soundwave artwork has yet to be fully revealed.
Proceed on your way to oblivion. |
Imaginarium Art
- Soundwave(2018)
- Imaginarium Art's Soundwave statue stands 32 inches tall and features light-up eyes. Though it is a statue, the set includes alternate heads and arms to change Soundwave's posture and whether he is holding his concussion blaster. The set also features attachment points for the included Ravage, Laserbeak, Rumble, and Ratbat. Only 200 were produced.
Keshi Surprise
- Decepticons(2018)
- TheKeshi Surpriseseries bySuper7consisted of 1.75 "soft rubber figures in a style deliberately resembling the 1980sDecoys.Theseblind-packedfigures were sold individually or in cases depicting only their faction. Soundwave was available in red, orange, blue, and purple and included a foil trading sticker.
Transformers Trading Card Game
- Major Soundwave, Espionage-Spy(2019)
- Wave 3: War for Cybertron: Siege I
- Rarity:UT
- Card Number:T10/T48
- Stars:11
- Major Soundwave, Espionage-Spy is one of forty-eight double-sided character cards available in Wave 3 of theTransformers Trading Card Game,War for Cybertron: Siege I.
- The card's artwork is based on theSiegeSoundwave toy, with the Bot Mode artwork being reused from the toy's packaging art, and original artwork for Alt Mode, with line-art byDan Khannaand colors byGunship Rev.
- Soundwave, Communications(2019)
- Blaster vs. Soundwave: 35th Anniversary Edition
- Rarity:SRT
- Card Number:T05/T08
- Stars:10
- Soundwave, Communications was released in theTransformers Trading Card GameBlaster vs. Soundwave box set. The box also includes the character cardsBlaster,Communications,Eject,Electronic Surveillance,Ramhorn,Warrior,Steeljaw,Tracker,Buzzsaw,Spy,Frenzy,Warrior, andRavage,Saboteur, along with two ready to play 40 card battle decks themed around both Blaster and Soundwave.
- The first release of this set was a 35th Anniversary Edition was initially released atSan Diego Comic-Con2019 alongside the TCG'sOmnibotConvention Pack, and later available online onHasbro Pulse.The 35th Anniversary Edition features throwback artwork, with the original G1 Soundwave packaging art on the Bot Mode side, and original artwork matching the G1 packaging art aesthetic for Alt Mode. This original Alt Mode artwork was drawn byMarcelo Matereand colored byBrian Valeza.
- Soundwave, Communications(2019)
- Blaster vs. Soundwave
- Rarity:SRT
- Card Number:T05/T08
- Stars:10
- This version of Soundwave, Communications was released as part of the general retail version of the Transformers Trading Card Game Blaster vs. Soundwave box set.
- Gameplay-wise the card is identical to the 35th Anniversary Edition of the set, and features different artwork reused from theTransformers Legendsmobile game.
ReAction
- Def Jam X Soundwave(2019)
- Accessories:Concussion blaster
- Originally available from Super 7 andNTWRKat the 2019 ComplexCon, this figure is redeco of the standardReActionSoundwave (below) in shades of light gray featuring branding fromDef Jam Recordings,celebrating the record label's 35th anniversary. Oddly, Super 7 announced the figure's existence with atweetafterComplexCon had already come and gone. However, NTWRK made it available again later that week, along with other merchandise for Def Jam's 35th anniversary.
- Soundwave(2020, 2024)
- Accessories:Concussion blaster
- Released in the first wave ofSuper7's line of multi-property 3.75-inch "retro" action figures,ReActionSoundwave is a non-converting 3 3/4-inch action figure based on his appearance in the original cartoon, with 5 points of articulation (swivel neck, shoulders, hips) and holes in his feet for use with some variety of stand. He comes with a concussion blaster which can only be held in his right hand.
- As with all releases in theReActiontoyline, Jazz comes packaged on a small cardback that emulates the nostalgic packaging style ofKenner'sStar Warsaction figures from the late 1970s to early '80s.
- In late 2024, this figure was reissued with no obvious changes, now in ablindpackedbox assortment.
- Soundblaster(2020)
- Accessories:Concussion blaster
- As a special "Black Friday"exclusive,ReActionSoundwave got ablack repaintas his rebuilt "Soundblaster" form.
- This figure was only available through Super7's website.
Super Cyborg
- Soundwave(2020)
- Accessories:Concussion blaster, torso plate,Laserbeakcassette
- Super CyborgSoundwave is a non-transforming figure released bySuper7,standing 11 inches tall and featuring 7 points of articulation. Its key distinguishing feature is a removable torso plate that exposes the detailed sculpted mechanical workings of the character's innards - not just the expected non-transforming Laserbeak cassette but also all sorts of diodes, transistors, and additional tape reels.
- Soundwave (Clear)(2020)
- Accessories:Concussion blaster, torso plate, Laserbeak cassette
- One of theexclusivesforNew York Comic Con2020 was a version ofSuper CyborgSoundwave redone in mostly clear plastic, with only some pale blue in the upper torso.
- Soundblaster(2021)
- Accessories:Concussion blaster, torso plate,Ratbatcassette
- Super CyborgSoundwave was redecoed in black as Soundblaster, now featuring a cassette that was labeled as "Ratbat" even though it is clearly the Laserbeak sculpt.
R.E.D. [Robot Enhanced Design]
- Soundwave(2020)
- Accessories:Concussion Blaster, cassette tape, 2 alternate hands, shoulder-mounted cannon, backpack
- Known designers:Emiliano Santalucia(concept artist),Dennis Chan(sculptor)
- Released as part of the first wave of theTransformers R.E.D.line, Soundwave is a non-transforming 6-inch action figure akin to the ones from theMarvelLegendsandStar WarsThe Black Serieslines. He is highly articulated and features extensive paint operations in an attempt to re-create
a Google Images search'sbest guess athis appearancein the show.
- Soundwave includes a number of accessories. He features two pairs of interchangeable hands: a set of two closed fists, a right hand to hold his includedConcussion Blaster,and a left hand posed with his index finger out to press his eject button. Speaking of which, his eject button actually depresses, opening his translucent cassette door; his cassette tape accessory, which is sculpted and coloured likeLaserbeak,can store inside his chest. Soundwave's shoulder-mounted cannon, attached by a swivel joint, is advertised as an accessory and can be removed, though it has no handle to be held like a gun. Oddly, his backpack (i.e. his cassette mode battery compartment) isalsoan accessory according to his product description; it can be removed and just... set aside, we guess.
- As with allR.E.D.toys, Soundwave was a Walmart exclusive in Canada and the United States, and was later made available onHasbro Pulsein limited quantities.
Figural Bag Clip
- Soundwave(Figural Bag Clip, 2020)
- Released byMonogram,this 2.5 "3D foam bag clip takes the form of a chibi Soundwave.
- It was available only as part of amystery blind bagcollection.
- Soundwave(Figural Bag Clip, 2021)
- A non-articulated, non-transforming 3 "figure of Soundwave with an attached clip, also released by Monogram.
- Unlike the previous year's release it was sold on a standard cardback.
Pop!
- Soundwave(2021)
- ID number:26
- Released as part of thePop! Retro Toyssegment,Funko'sPop!Soundwave is a super deformed vinyl figure based on his original Generation 1 toy.
- Soundwave(2021)
- ID number:37
- A GameStop exclusive redeco of the figure above, this version of Soundwave features battle damage on his chest window.
- Soundwave with Tapes(Jumbo size, 2021)
- A GameStop exclusive larger version ofPop!Soundwave measuring 10-inches tall. He comes with four tapes decorated as his favorite minions which can be stored (one at a time) inside of his chest window. The tapes are made to the same size as Generation 1 Soundwave and Blaster-compatible cassettes, which meansPop!Soundwave can also hold any Masterpiece tapes. Yes, really.
- Contrary to what his stock photos suggest, he's colored the same as the regular vynils and is not a lighter shade of blue.
- Soundwave(DigitalPop!,2022)
- Rarity:
- Monochrome:Common
- Static:Common
- Glowing:Uncommon
- Chrome:Uncommon
- Original:Epic
- Rarity:
- NFTsdepicting Soundwave in the Funko style.
- Soundwave(Pop!Pin, 2022)
- ID number:16
- Accessories:Display stand
- A metallic enamel pin based on Soundwave's vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.
- Freddy Funko as Soundwave(2023)
- ID number:SE
- Exclusive to Funko's Heavy Metal Halloween 2023 event, this regular-sized vinyl figure portraysFreddy Funkocosplaying as Soundwave. The body of this figure is the same as the regular Soundwave, while the head has been modified to incorporate Freddy's face. This figure was limited to 4000 pieces.
- Freddy Funko as Soundwave(2023)
- ID number:SE
- A metallic version of Soundwave Freddy was also available, limited to 500 pieces.
Zōteki
- Soundwave(2021)
- ID number:028
- A collaboration betweenHasbroand statue/replica brandJazware,The Transformerswas added as a part of theZōtekiline alongside other iconic brands such asMarvel,to recreate some of the main "Generation 1" characters. The 28th figure of theZōtekiline is Soundwave who is posed ejectingLaserbeakout of his back?Riiiight.
- Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.
Eaglemoss
- Transformers Gen-1 Chess Set(
2021)
- In the plannedTransformers Chess SetbyEaglemoss,a relatively large and very well detailed statue of Soundwave was slated to be one of the Knight pieces on the Decepticon side.
- A Kickstarter campaign to raise the necessary funds for this project was launched, but failed to meet its goal by September 24, 2021 and the whole thing was canceled.
Proceed on your way to oblivion. |
Modern Icons
- Soundwave Helmet Replica(February 2,2022)
- A collaboration between Hasbro and statue and replica brand Modern Icons, this is a wearable helmet for adult collectors, based on Soundwave's head. It features light-up eyes and authentic sounds and phrases.
- The Soundwave helmet is a GameStop exclusive in the United States.
e-HOBBY
Transformers Character Card
- Released as part of the second wave of thee-HOBBYexclusiveTransformers Character Cardseries, this pair of holographic trading cards depict super-deformed art ofBlasterand Soundwave along withcharacter profilesandtech specs.
- Twincast & Soundblaster Set(October 17,2023)
- ID number:67 & 68
- Released as part of the ninth wave of thee-HOBBYexclusiveTransformers Character Cardseries, this pair of holographic trading cards depict super-deformed art ofTwincastand Soundblaster in their respectiveHeadmastersforms along withcharacter profilesandtech specs.
- Destron Army and Unicron Set(December,2024)
- ID number:99 & 100
- Released as part of the thirteenth wave of thee-HOBBYexclusiveTransformers Character Cardseries, this pair of holographic trading cards depict super-deformed art of the Generation 1Decepticons(as represented byMegatron,Soundwave,Laserbeak,Starscream,Shockwave,Stranglehold,andBanzai-Tron) andUnicronalong withcharacter profilesandtech specs.
Rubber strap series
- Released as part of the first wave of ane-HOBBYexclusive series, this trio of rubber keychains depict super-deformed art ofStarscream,Soundwave andShockwave.
- Sound System Set(June2023)
- Released as part of the second wave of ane-HOBBYexclusive series, this trio of rubber keychains depict super-deformed art of "Soundblaster," "Condor","Jaguar,"and Soundwave's original form in boombox mode.
Jada Toys
- Transformers Series 1 18-pack(4cm Die Cast Figure Multipack, 2022)
- Released byJada Toys,Nano MetalfigsSeries 1 Soundwave is an incredibly small die-cast figurine molded doing an action pose. He has a little base attached to his feet for balancing reasons.
- He comes in an impressive multipack withseventeen other figurines.
- Transformers Series 2 18-pack(4cm Die Cast Figure Multipack, 2022)
- ForNano MetalfigsSeries 2, Soundwave was redecoed into Soundblaster.
- He comes inanotherimpressive multipack withseventeen other figurines.
- Transformers Series 3 18-pack(4cm Die Cast Figure Multipack, 2023)
- For thethirdNano Metalfigsmultipack,two Soundwaves were made available at once. One is a re-release of the Series 1 figurine with no noticeable changes, and the other is a golden redeco of the same figurine.
Minimates
- Soundwave(Series 2, 2022)
- Accessories:Blaster, stand
- Part of the second wave of TransformersMinimatesfromDiamond Select,this Soundwave is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. Due to their small size, all 4 figures in each series are sold in the same blister card.
Icon Heroes
- Megatron X Soundwave Retro Pin Set(2022)
- A hard enamel pin based on Soundwave's original G1 package art made by Icon Heroes. It comes carded with aMegatronpin.
- Nemesis Prime X Soundblaster Retro Pin Set(2022)
- The same pin but in Soundblaster colors was also available, this time carded with aNemesis Primepin.
- Soundwave Bust Card Holder(2022)
- A 5.5 "tall polystone bust of Soundwave posing with his finger clicking his shoulder button. The tape deck can be opened and used as a business card holder.
Magic: The Gathering
- Soundwave, Sonic Spy / Soundwave, Superior Captain(2022)
- ID number:014/015
- Set code:BOT
- Color identity:White/Blue/Black
- Casting cost:{1}{W}{U}{B}(front),{2}{W}{U}{B}(back)
- Artist:Ken Christiansen
- "Soundwave, Sonic Spy" is part of the 2022Magic: The GatheringUniverses BeyondTransformerscard set, found in Set Booster and Collector Booster packs ofMagic'sThe Brothers' Warset. It can be reversed to become "Soundwave, Superior Captain", representing Soundwave in cassette player mode.
- Soundwave can generatetokensofLaserbeakandRavage.
- A variant of this card was available solely in Collector Booster packs, depictingShattered GlassSoundwave.
XM Studios
- Soundwave(2022)
- XM Studios' statue of Soundwave is 29 "tall, made of hand-painted porcelain. Soundwave comes with closed and open chest doors, and alternate arms depending on whether owners want him to be posing, pointing, opening his chest door, holding his own guns, or holding a gun-mode Megatron. He is accompanied by Ravage, Rumble, Ratbat, and Laserbeak. The set also includes a sculpted representation of Soundwave's cassette player mode that can be displayed next to the robot.
- 599 pieces were produced, with a suggested price of about $1,700 US.
ULTIMATES!
- Soundwave(2023)
- Accessories:2 alternate heads, 2 fists, 2 gripping hands, 2 trigger hands, 2 open palm hands, flat right hand, pointing left hand, shoulder cannon, concussion blaster, battery cover, energon cube,Laserbeakcassette, Soundwave cassette-player mode
- ULTIMATES!Soundwave is a 7-inch-tall action figure based on his cartoon model. He features multi-directional joints at the neck, shoulders, wrists, hips, and ankles; plus swivel biceps, elbows, knees, and a bit of ab crunch. His hands pop out at the wrists so they can be replaced with his additional spare hands in different poses. He includes his usual handheld and shoulder-mounted weapons, as well as 2 alternate heads: one based closely around the G1 toy, the other based on his appearance in the G1 Marvel comics (complete with a mouth!). Replicating a feature of the original Soundwave toy, this figure's backpack has a "battery compartment" that can store both of his weapons. He also includes a small representation of his own tape player mode, as well as a Laserbeak cassette that can be stored in his chest door.
- Preorders opened in June 2022, with figures expected to ship the following May... but actually shipping in January 2024.
- Soundwave(2024)
- Accessories:shoulder cannon, Laserbeak cassette
- ULTIMATES!Soundwave was repackaged as a "Transformers Deluxe" figure, physically identical to the first release but now lacking all accessories except the shoulder cannon and cassette. Its new packaging resembles a VHS clamshell box; specifically, the colors and trade dress strongly resemble theVideo Gemstapes, while the character artwork and subtitle are taken directly from theKid Rhinotapes. It was exclusive toAmazon.com.
Flame Toys
- Released as part ofFlame Toys'Furai Modelline ofGunpla-style model kits, "Sound Wave" is an articulated, non-transforming, Voyager Class-sizedGunpla-style model kit, using parts made of hard ABS plastic. He also comes with an equally non-transforming Ravage.
- For straight-assembly builders, Sound Wave features a sheet of foil stickers for detail (notably the shoulder insignias), though the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers likeGundam Markerscan potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.
Fools Paradise
- Soundwave(2024)
- Accessories:Football
- Part of a collaboration between Hasbro andHong Kong-based online store ZCWO, Soundwave joins the "League of Steel" subline ofFools Paradise's LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues ofEvangelionsandGundams.He is depicted as a human man wearing heavily Soundwave-inspired body armor and sports equipment, including a colour-coordinated football. He is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and mustache.
- Preorders for Soundwave opened in October 2023, with a projected release date of March 2024.
Hot Wheels
- Soundwave(Skate, 2024)
- Accessories:Finger sneakers
- Part of theHot WheelsSkatesubset made byMattel,this is a Soundwave-themed finger skateboard that comes with a pair of blue and gold finger sneakers. The shape and packaging use Dreamwave-era artwork of Soundwave.
Yolopark
3D Metal Puzzle
AMK Mini Series
- Soundwave(2024)
- Accessories:2 additional pairs of hands (Splayed, Pointing), Concussion Blaster
- Released as part of Yolopark'sAMK (Advanced Model Kit) Mini Series,this kit of Soundwave can be only completed by snapping the pre-painted pieces together. Aside from the identical hand parts used for most of theAMK Minis, Soundwave also comes with his usual signature concussion blaster.
- Initial photos of the painted prototype showed Soundwave possessing a desaturated blue and white, the tape door chest being white, and the yellow details on his lower legs are missing.
- Soundwave is sold as either an individually marked single or a blind box figure.
Blokees
- Soundwave(Galaxy Version, 2024)
- Series:Galaxy Version 03 - The Autobot Run
- Soundwave Secret Figure(Galaxy Version, 2024)
- Series:Galaxy Version 03 - The Autobot Run
- Soundwave(Shining Version, 2024)
- Series:Shining Version 02 - Shining 1985
References
- ↑"First4Figures Limited Transformers Statues and Busts Info!"at ASMzine.com (archived)
