Mô tổ:Category handler/config
Vẻ ngoài
Mô khối hồ sơ[Xem xét] [Biên tập] [Lịch sử] [Thanh trừ hoãn tồn]
Này mô khối bị trích dẫn vớiƯớc 1,680,000 cái giao diện. Vì tránh cho tạo thành đại quy mô ảnh hưởng, sở hữu đối này mô khối biên tập ứng trước vớiHộp cátHoặcThí nghiệm dạng lệThượng thí nghiệm. Thí nghiệm sau không có lầm phiên bản có thể dùng một lần mà gia nhập này mô khối trung, nhưng là sửa chữa trước làm ơn tất vớiThảo luận trangKhởi xướng thảo luận. Khuôn mẫu trích dẫn số lượng sẽ tự động đổi mới. |
Không có hiệu quả bình xét cấp bậc hoặc chưa chỉ định bình xét cấp bậc |
Cách dùng
{{#invoke:Category handler|function_name}}
Kể trênHồ sơKhảm nhậpTựModule:Category handler/config/doc.(Biên tập|Lịch sử) Người biên tập có thể ở bổn mô khối hộp cát(Sáng tạo|Cảnh trong gương)Cùng thí nghiệm dạng lệ(Sáng tạo)Giao diện tiến hành thực nghiệm. Bổn mô khối tử giao diện. |
--------------------------------------------------------------------------------
-- [[Module:Category handler]] configuration data --
-- Language-specific parameter names and values can be set here. --
-- For blacklist config, see [[Module:Category handler/blacklist]]. --
--------------------------------------------------------------------------------
localcfg={}-- Don't edit this line.
--------------------------------------------------------------------------------
-- Start configuration data --
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
-- Parameter names --
-- These configuration items specify custom parameter names. --
-- To add one extra name, you can use this format: --
-- --
-- foo = 'parameter name', --
-- --
-- To add multiple names, you can use this format: --
-- --
-- foo = {'parameter name 1', 'parameter name 2', 'parameter name 3'}, --
--------------------------------------------------------------------------------
cfg.parameters={
-- The nocat and categories parameter suppress
-- categorisation. They are used with Module:Yesno, and work as follows:
--
-- cfg.nocat:
-- Result of yesno() Effect
-- true Categorisation is suppressed
-- false Categorisation is allowed, and
-- the blacklist check is skipped
-- nil Categorisation is allowed
--
-- cfg.categories:
-- Result of yesno() Effect
-- true Categorisation is allowed, and
-- the blacklist check is skipped
-- false Categorisation is suppressed
-- nil Categorisation is allowed
nocat='nocat',
categories='categories',
-- The parameter name for the legacy "category2" parameter. This skips the
-- blacklist if set to the cfg.category2Yes value, and suppresses
-- categorisation if present but equal to anything other than
-- cfg.category2Yes or cfg.category2Negative.
category2='category2',
-- cfg.subpage is the parameter name to specify how to behave on subpages.
subpage='subpage',
-- The parameter for data to return in all namespaces.
all='all',
-- The parameter name for data to return if no data is specified for the
-- namespace that is detected.
other='other',
-- The parameter name used to specify a page other than the current page;
-- used for testing and demonstration.
demopage='page',
}
--------------------------------------------------------------------------------
-- Parameter values --
-- These are set values that can be used with certain parameters. Only one --
-- value can be specified, like this: --
-- --
-- cfg.foo = 'value name' -- --
--------------------------------------------------------------------------------
-- The following settings are used with the cfg.category2 parameter. Setting
-- cfg.category2 to cfg.category2Yes skips the blacklist, and if cfg.category2
-- is present but equal to anything other than cfg.category2Yes or
-- cfg.category2Negative then it supresses cateogrisation.
cfg.category2Yes='yes'
cfg.category2Negative='¬'
-- The following settings are used with the cfg.subpage parameter.
-- cfg.subpageNo is the value to specify to not categorise on subpages;
-- cfg.subpageOnly is the value to specify to only categorise on subpages.
cfg.subpageNo='no'
cfg.subpageOnly='only'
--------------------------------------------------------------------------------
-- Default namespaces --
-- This is a table of namespaces to categorise by default. The keys are the --
-- namespace numbers. --
--------------------------------------------------------------------------------
cfg.defaultNamespaces={
[0]=true,-- main
[6]=true,-- file
[12]=true,-- help
[14]=true,-- category
[100]=true,-- portal
[108]=true,-- book
}
--------------------------------------------------------------------------------
-- Wrappers --
-- This is a wrapper template or a list of wrapper templates to be passed to --
-- [[Module:Arguments]]. --
--------------------------------------------------------------------------------
cfg.wrappers='Template:Category handler'
--------------------------------------------------------------------------------
-- End configuration data --
--------------------------------------------------------------------------------
returncfg-- Don't edit this line.