欢迎访问ic37.com |
会员登录 免费注册
发布采购

LX5107CPWPT 参数 Datasheet PDF下载

LX5107CPWPT图片预览
型号: LX5107CPWPT
PDF下载: 下载PDF文件 查看货源
内容描述: 终结者\n [Terminator ]
分类和应用: 总线通信驱动程序和接口接口集成电路光电二极管
文件页数/大小: 5 页 / 158 K
品牌: MICROSEMI [ Microsemi ]
 浏览型号LX5107CPWPT的Datasheet PDF文件第2页浏览型号LX5107CPWPT的Datasheet PDF文件第3页浏览型号LX5107CPWPT的Datasheet PDF文件第4页浏览型号LX5107CPWPT的Datasheet PDF文件第5页  
LIN DOC #: 5107  
LX5107  
9-LINE LOW CAPACITANCE, µPOWER SCSI TERMINATOR  
P R O D U C T I O N D A T A S H E E T  
T H E I N F I N I T E P O W E R O F I N N O V A T I O N  
DESCRIPTION  
KEY FEATURES  
3.0pF OUTPUT CAPACITANCE DURING  
The LX5107 is a nine-line active terminator  
for the SCSI parallel bus. This SCSI stan-  
dard recommends active termination at  
both ends of the SCSI bus.  
the lowest enabled supply current of any  
terminator available on the market today.  
Linfinity's proprietary BiCMOS low drop-  
out regulator architecture enables this  
unique and very efficient operating char-  
acteristic.  
The LX5107 also offers a precisely  
trimmed channel output current specified  
to a 5% tolerance. The maximum value  
of the output current is trimmed as closely  
as possible to the SCSI standard maximum  
specification to give the highest possible  
noise margin for fast SCSI operation. In  
addition, the LX5107 sinks up to 50mA of  
current making it compatible with today's  
fast active negation drivers.  
DISCONNECT  
30µA SUPPLY CURRENT IN DISCONNECT  
MODE  
During disconnect mode, the LX5107  
requires a meager 30µA of supply current  
while offering only 3.0pF of output capaci-  
tance. To enter this low-power mode, the  
disconnect pin should be driven low  
thereby disconnecting the terminating re-  
sistors and placing the internal low drop-  
out regulator into low-power mode. In  
disconnect mode, each termination line  
presents a high impedance to the SCSI bus  
with the overall effect being to preserve  
high signal integrity and yield subsequent  
reliable, error free communications.  
During normal operation, the LX5107  
consumes only 600µA of current which is  
600µA SUPPLY CURRENT DURING NORMAL  
OPERATION  
50mA SINK CURRENT FOR ACTIVE  
NEGATION  
LOGIC COMMAND DISCONNECTS ALL  
TERMINATION LINES  
CURRENT LIMIT AND THERMAL PROTECTION  
COMPATIBLE WITH SCSI 1, 2 AND 3  
STANDARDS  
MEETS SCSI HOT PLUGGING CAPABILITY  
CONSULT FACTORY FOR APPLICATION TEST  
REPORT: 5107TR  
The LX5107 is a superior, pin-for-pin  
replacement for a variety of industry prod-  
ucts such as the DS2107S and DS21S07A  
.
IMPORTANT: For the most current data, consult LinFinity's web site: http://www.linfinity.com.  
PRODUCT HIGHLIGHT  
RECEIVING WAVEFORM - 10MHZ  
DRIVING WAVEFORM - 10MHZ  
Receiver  
Driver  
1 Meter, AWG 28  
LX5107  
LX5107  
NOTE:  
For An In-Depth  
LX5268  
LX5268  
Discussion On Applying  
SCSI, Request Linfinity  
Application Note:  
"Understanding The  
Single-Ended SCSI Bus"  
PACKAGE ORDER INFORMATION  
Plastic SOWB  
16-pin  
Plastic TSSOP  
20-pin, Power  
TJ (°C)  
DW  
PWP  
0 to 70  
LX5107CDW  
LX5107CPWP  
Note: All surface-mount packages are available in Tape & Reel.  
Append the letter "T" to part number. (i.e. LX5107CDWT)  
L I N F I N I T Y M I C R O E L E C T R O N I C S I N C .  
11861 WESTERN AVENUE, GARDEN GROVE, CA. 92841, 714-898-8121, FAX: 714-893-2570  
Copyright © 1997  
Rev. 1.2 11/97  
1
 复制成功!