Hoan nghênh phóng vấn ic37.com|
Hội viên đăng lục Miễn phí chú sách
Hội viên trung tâm
Xí nghiệp tư tấn Nhân tài chiêu sính
Điện tử bách khoa

Điện tử bách khoa

Datasheet hạ tái IC phẩm bài Súc lược ngữ Kỹ thuật văn chương IC hình hào

Sản phẩm đạo hàng

ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
Sản phẩm
  • Sản phẩm
  • PDF

    • Tối cận sưu tác

    Nhiệt môn sưu tác

    Sưu tác
    Phát bố thải cấu
    Sở tại địa: Hình hào: Tinh xác
    • Phê lượng tuân giới
    • Cung ứng thương
    • Hình hào
    • Sổ lượng
    • Hán thương
    • Phong trang
    • Phê hào
    • Giao dịch thuyết minh
    • Tuân giới
    Canh đa
    • AT0805DRD07124KL图

    • Thâm quyến thị kinh vũ khoa kỹ hữu hạn công tư

      该会员已使用本站11年以上
    • AT0805DRD07124KL
    • Sổ lượng96500
    • Hán giaYAGEO- quốc cự
    • Phong trangSMD-0805
    • Phê hào▉▉: 2 niên nội
    • ▉▉￥10 nhất nhất hữu vấn tất hồi nhất nhất hữu trường kỳ đính hóa nhất bị hóa HK thương khố
    • QQ:43871025QQ: 43871025Phục chế
    • 131-4700-5145---Q- vi - cung - hầu --- hữu - vấn - miểu - hồi QQ:43871025

    Sản phẩm hình hào AT0805DRD0715KL đích Datasheet PDF văn kiện dự lãm

    DATA SHEET
    THIN FILM CHIP RESISTORS
    AUTOMOTIVE GRADE
    AT series
    0.1%TO1%, TC 15TOTC50
    sizes 0402/0603/0805/1206
    RoHS compliant
    Product specification
    2
    9
    SERIES
    0402 to 1206
    AT
    Chip Resistor Surface Mount
    SCOPE
    ORDERING INFORMATION - GLOBAL PART NUMBER
    This specification describes AT0402 to
    AT1206 high precision-high stability
    chip resistors with lead-free
    terminations made by thin film
    process.
    Part number is identified by the series name, size, tolerance, packaging
    type, temperature coefficient, taping reel and resistance value.
    GLOBAL PART NUMBER
    ATXXXX X X X XX XXXXX L
    ( )
    1
    ( )( )( )( )
    ( )
    6
    ( )
    7
    2
    3
    4
    5
    ( )
    1 SIZE
    APPLICATIONS
    Automotive electronics
    Industrial and medical equipment
    Test and measuring equipment
    Telecommunications
    0402 / 0603 / 0805 / 1206
    ( )
    2 TOLERANCE
    B = ±0.1%
    C = ±0.25%
    D = ±0.5%
    F =±1%
    FEATURES
    AEC-Q200 qualified
    ( )
    3 PACKAGINGTYPE
    Superior resistance against sulfur
    R = Paper taping reel
    containing atmosphere
    ( )
    4 TEMPERATURECOEFFICIENT OF RESISTANCE
    Moisture sensitivity level: MSL 1
    C = ± 15 ppm/°C
    D = ± 25 ppm/°C
    E = ± 50 ppm/°C
    Products with lead free
    terminations meet RoHS
    requirements
    Reducing environmentally
    ( )
    5 TAPINGREEL
    hazardous wastes
    07 = 7 inch dia. Reel
    High component and equipment
    ( )
    6 RESISTANCEVALUE
    reliability
    There are 2~4 digits indicated the resistor value.
    Letter R/K/M is decimal point
    Example: 100R = 100Ω
    Non-forbidden materials used in
    products/production
    Halogen free epoxy
    1K = 1,000Ω
    (7) DEFAULT CODE
    Letter L is the system default code for ordering only.(NOTE)
    ORDERING EXAMPLE
    The ordering code of a AT0402 chip resistor, TC 25 value 56Ωwith±
    0.5% tolerance, supplied in 7-inch tape reel is: AT0402DRD0756RL.
    NOTE
    1. All our Rchip products meet RoHS compliant and Halogen Free. "LFP" of the
    internal 2D reel label mentions "Lead Free Process".
    2. On customized label, "LFP" or specific symbol can be printed.
    www.yageo.com
    Oct. 24, 2017V5
    Product specification
    3
    9
    SERIES
    0402 to 1206
    AT
    Chip Resistor Surface Mount
    MARKING
    AT0402
    No marking
    Fig. 1
    AT0603
    E-96 series: including values 10/11/13/15/20/75 of E-24 series, 3 digits
    Fig. 3
    Value = 12.4Ω
    E-24 series: exception values 10/11/13/15/20/75 of E-24 series, one short bar
    under marking letter
    563
    Fig. 4
    Value = 56 KΩ
    AT0805 / AT1206
    Both E-24 and E-96 series: 4 digits
    First three digits for significant figure and 3rd digit for number of zeros
    00
    Fig. 5Value = 10 KΩ
    NOTE
    For further marking information, please see special data sheet“Chip resistors marking”.
    CONSTRUCTION
    OUTLINES
    A metal film layer is deposited on a high
    grade ceramic body (aluminium oxide).
    This resistive layer is trimmed to its
    nominal value and on both ends a contact
    is made which will guarantee optimum
    solderability. This is achieved by applying
    several layers and for ease of soldering the
    outer layer consists of Ni/matte tin. The
    resistive layer is covered with a protective
    coating.
    Fig. 6Chip resistor outlines
    www.yageo.com
    Oct. 24, 2017V5
    Product specification
    4
    9
    SERIES
    0402 to 1206
    AT
    Chip Resistor Surface Mount
    DIMENSIONS
    Table 1
    TYPE
    L (mm)
    1.00 ±0.10
    1.60 ±0.10
    2.00 ±0.10
    3.10 ±0.10
    W (mm)
    0.50 ±0.05
    0.80 ±0.10
    1.25 ±0.10
    1.60 ±0.10
    H (mm)
    0.30 ±0.05
    0.45 ±0.10
    0.50 ±0.10
    0.55 ±0.10
    I1(mm)
    0.20 ±0.10
    0.25 ±0.15
    0.35 ±0.20
    0.45 ±0.20
    I2(mm)
    0.25 ±0.10
    0.25 ±0.15
    0.35 ±0.20
    0.40 ±0.20
    AT0402
    AT0603
    AT0805
    AT1206
    ELECTRICAL CHARACTERISTICS
    Table 2
    Resistance Range (E-24/E-96 series)() & Tolerance
    Dielectric
    Ω
    Operating
    Temperature
    Range
    Max.
    Max.
    Power
    Working Overload Withstanding
    T.C.R. (ppm/°C)
    0.1%
    ±
    0.25%
    ±
    0.5%
    ±
    1%
    ±
    Rating Voltage Voltage
    Voltage
    TYPE
    ±15
    10~11K
    AT0402
    1/16W
    1/10W
    1/8W
    50 V
    75V
    100 V
    150 V
    300 V
    400 V
    100 V
    ±25, ±50
    10~100K
    ±15
    10~14K
    AT0603
    AT0805
    AT1206
    100 V
    300 V
    500 V
    ±25, ±50
    10~330K
    –55 °C to +155 °C
    ±15
    10~17K
    10~1M
    150 V
    200 V
    ±25, ±50
    ±15
    10~20K
    10~1M
    1/4W
    ±25, ±50
    FOOTPRINT AND SOLDERING PROFILES
    For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
    PACKING STYLE AND PACKAGING QUANTITY
    Table 3Packing style and packaging quantity
    QUANTITY PER REEL
    10,000 Units
    PRODUCT TYPE
    AT0402
    PATKING STYLE
    Paper taping reel
    Paper taping reel
    REEL DIMENSION
    7 "(178 mm)
    7 "(178 mm)
    AT0603
    AT0805
    AT1206
    5,000 Units
    Paper taping reel
    Paper taping reel
    7 "(178 mm)
    7 "(178 mm)
    5,000 Units
    5,000 Units
    NOTE:for paper tape and reel specification/dimensions, please see the special data sheet “packing” document.
    www.yageo.com
    Oct. 24, 2017V5
    Product specification
    5
    9
    SERIES
    0402 to 1206
    AT
    Chip Resistor Surface Mount
    FUNCTIONAL DESCRIPTION
    OPERATING TEMPERATURE RANGE
    Range:–55 °C to +155 °C
    POWER RATING
    Each type rated power at 70 °C:
    AT0402=1/16 W
    AT0603=1/10 W
    AT0805=1/8 W
    AT1206=1/4 W
    RATED VOLTAGE
    The DC or AT (rms) continuous working voltage
    corresponding to the rated power is determined by
    the following formula:
    Fig. 10Maximum dissipation (P) in percentage of rated power
    max
    as a function of the operating ambient temperature (T
    )
    amb
    V =(PxR)
    Or max. working voltage whichever is less
    Where
    V=Continuous rated DC
    or AC (rms) working voltage (v)
    P=Rated power
    R=Resistance value (Ω)
    www.yageo.com
    Oct. 24, 2017V5
    Product specification
    6
    9
    SERIES
    0402 to 1206
    AT
    Chip Resistor Surface Mount
    TESTS AND REQUIREMENTS
    Table 4Test condition, procedure and requirements
    TEST
    TEST METHOD
    IEC60115-1 4.13
    PROCEDURE
    REQUIREMENTS
    Short Time
    Overload
    2.5 times of rated voltage or maximum
    ±(0.05%+0.05Ω)
    overload voltage, the less of the above, for 5 sec
    at room temperature
    High
    Temperature
    Exposure
    AEC-Q200 Test 3
    1,000 hours at Tamb = 125 °C, unpowered
    1,000 hours at Tamb = 155 °C, unpowered
    ±(0.1%+0.05Ω)
    ±(0.3%+0.05Ω)
    ±(0.1%+0.05Ω)
    MIL-STD-202 Method 108
    Moisture
    Resistance
    AEC-Q200 Test 6
    Each temperature / humidity cycle is defined at
    8 hours (method 106F), 3 cycles / 24 hours for
    10d. with 25 °C / 65 °C 95% R.H, without steps
    7a & 7b, unpowered
    MIL-STD-202 Method 106
    Parts mounted on test-boards, without
    condensation on parts
    Biased
    AEC-Q200 Test 7
    1,000 hours; 85 °C / 85% RH
    ±(0.1%+0.05Ω)
    ±(0.1%+0.05Ω)
    Humidity
    MIL-STD-202 Method 103
    10% of operating power
    Measurement at 24±4 hours after test conclusion
    Operational
    Life
    AEC-Q200 Test 8
    1,000 hours at 70±5 °C, RCWV applied for 1.5
    hours on, 0.5 hour off, still air required
    MIL-STD-202 Method 108
    1,000 hours at 125 °C, derated voltage applied for±(0.3%+0.05Ω)
    1.5 hours on, 0.5 hour off, still air required
    Resistance to
    Soldering
    Heat
    AEC-Q200 Test 15
    Condition B, no pre-heat of samples
    Lead-free solder, 260±5 °C, 10±1
    seconds immersion time
    ±(0.05%+0.05Ω)
    MIL-STD-202 Method 210
    Procedure 2 for SMD: devices fluxed and
    cleaned with isopropanol
    Thermal
    Shock
    AEC-Q200 Test 16
    -55/+125 °C
    ±(0.1%+0.05Ω)
    Number of cycles is 300. Devices
    mounted Maximum transfer time is 20
    seconds. Dwell time is 15 minutes. Air–
    Air
    MIL-STD-202 Method 107
    No visible damage
    Solderability
    - Wetting
    Electrical Test not required Magnification
    50X SMD conditions:
    AEC-Q200 Test 18
    J-STD-002
    Well tinned
    (>95% covered)
    No visible damage
    (a) Method B, aging 4 hours at 155 °C dry heat,
    dipping at 235±3 °C for 5±0.5 seconds.
    (b) Method B, steam aging 8 hours, dipping at
    215±3 °C for 5±0.5 seconds.
    (c) Method D, steam aging 8 hours, dipping at
    260±3 °C for 7±0.5 seconds
    www.yageo.com
    Oct. 24, 2017V5
    Product specification
    7
    9
    SERIES
    0402 to 1206
    AT
    Chip Resistor Surface Mount
    Board Flex /
    Bending
    Chips mounted on a 90mm glass epoxy resin
    PCB (FR4)
    Bending for 0402: 5 mm
    0603/0805: 3 mm
    AEC-Q200 Test 21
    AEC-Q200-005
    ±(0.1%+0.05Ω)
    1206: 2mm
    Holding time: minimum 60 second
    Temperature
    Coefficient of
    Resistance
    (T.C.R.)
    IEC 60115-1 4.8
    At +25/–55 °C and
    +25/+125°C Formula:
    R2–R1
    Refer to table 2
    R2 - R1
    T.C.R=
    ×106(ppm/°C)
    R1(t2t1)
    Where
    t1=+25 °C or specified room temperature
    t2=–55 °C or +125 °C test temperature
    R1=resistance at reference temperature in
    ohms R2=resistance at test temperature in
    ohms
    Flower of
    Sulfur
    ASTM-B-809-95*
    * Modified
    Sulfur 750 hours, 105°C, unpowered.
    ±(4.0%+0.05Ω)
    www.yageo.com
    Oct. 24, 2017V5
    Product specification
    8
    9
    SERIES
    0402 to 1206
    AT
    Chip Resistor Surface Mount
    REVISION HISTORY
    REVISION DATE
    CHANGE NOTIFICATIONDESCRIPTION
    - Add resistance range for ±15 ppm/°C
    Version 5
    Version 4
    Version 3
    Version 2
    Version 1
    Version 0
    Oct. 24, 2017
    Mar. 16, 2016
    Dec. 11, 2015
    May 11, 2015
    Jun. 18, 2014
    May 07, 2014
    -
    -
    -
    -
    -
    - Remove FOS 90°C test
    - Modify Outline
    - Modify FOS test
    - Modify FOS test
    - First issue of this specification
    www.yageo.com
    Oct. 24, 2017V5
    Product specification
    9
    9
    SERIES
    0402 to 1206
    AT
    Chip Resistor Surface Mount
    LEGAL DISCLAIMER
    Yageo, its distributors and agents (collectively, “Yageo” ), hereby disclaims any and all liabilities for any errors,
    inaccuracies or incompleteness contained in any product related information, including but not limited to
    product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or
    improvements to product related information at any time and without notice.
    Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular
    purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo
    disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all
    liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied
    warranties, including warranties of fitness for a particular purpose, non-infringement and merchantability.
    Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s
    knowledge of typical operating conditions for such types of applications in a generic nature. Such statements
    are neither binding statements of Yageo nor intended to constitute any warranty concerning thesuitability for a
    specific customer application or use. They are intended for use only by customers with requisite knowledge and
    experience for determining whether Yageo products are the correct products for their application or use. In
    addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or
    use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective
    safeguard measures to ensure that product failure would not result in personal injury or property damage.
    Yageo products are not designed for application or use in medical, life-saving, or life-sustaining devices or for
    any other application or use in which the failure of Yageo products could result in personal injury or death.
    Customers using or selling Yageo products not expressly indicated for above-mentioned purposes shall do so at
    their own risk and agree to fully indemnify Yageo and hold Yageo harmless.
    Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for
    revising this content without further notification, as long as products are unchanged. Any product change will
    be announced by PCN.
    www.yageo.com
    Oct. 24, 2017V5
    Phối đan trực thông xa
    AT0805DRD07732KL sản phẩm tham sổ
    Hình hào:AT0805DRD07732KL
    Thị phủ vô duyên:Bất hàm duyên
    Thị phủ Rohs nhận chứng:Phù hợp
    Sinh mệnh chu kỳ:Active
    IHS chế tạo thương:YAGEO CORP
    Bao trang thuyết minh:CHIP
    Reach Compliance Code:compliant
    Phong hiểm đẳng cấp:5.78
    • Cung hóa thương
    • Hình hào*
    • Sổ lượng*
    • Hán thương
    • Phong trang
    • Phê hào
    • Giao dịch thuyết minh
    • Tuân giới
  • Miễn phí chú sáchVong ký mật mã
    • Phê lượng tuân giới tuyển trung đích ký lụcDĩ tuyển trung0Điều, mỗi thứ tối đa 15 điều.

    IC37: Chuyên nghiệp IC hành nghiệp bình đài

    Chuyên nghiệp IC lĩnh vực cung cầu giao dịch bình đài: Đề cung toàn diện đích IC Datasheet tư liêu hòa tư tấn, Datasheet 1000 vạn sổ cư, IC phẩm bài 1000 đa gia.

    Võng trạm đạo hàng Datasheet tư liêu khố Điện tử thuật ngữ Điện tử bách khoa
    Phục vụ trung tâm Thường kiến vấn đề Ủy thác giao dịch Hội viên phục vụ
    Quan vu ngã môn Công tư giản giới Liên hệ ngã môn Miễn trách thân minh

    Sản phẩm tác dẫn:ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789

    Thâm quyến võng lạc cảnh sát báo cảnh bình đài Công cộng tín tức an toàn võng lạc giam sát Kinh doanh tính võng trạm bị án tín tức Bất lương tín tức cử báo trung tâm Công thương võng giam điện tử tiêu thức Toàn quốc công an cơ quan bị án
    Phục vụ điện thoại: 0755-32882616 0755-32882606 0755-32882608 0755-32882607 trị ban hòa đầu tố điện thoại: 13715251531 ©2004-2024 IC37 võng bản quyền sở hữu: ic37.comBản quyền thân minh Công võng an bị 44030402000606 Việt ICP bị 13051289 hào -6
    Phục chế thành công!